Partner'ides6:sapdp00' not reached
Hi,
I need some help please,
i installed SAP ECC v6.0 SR3 IDES Oracle 10.2.0.2 , The installation was good, including the SAPGUI. ,
my first logged in was ok , and i shut down my pc , after some while i opened it again , try to log in , i had this message
Please help
ahmed
Hi Ahmed,
After analysis you're getting error
SQL error 12571: 'ORA-12571: TNS:packet writer failure'
C *** ERROR => Error 12571 in stmt_fetch() from oci_execute_stmt(), orpc=0
For the issue kindly follow SAP Note 534729 - Oracle errors due to network problems
and SCN doc at [Oracle] A short SQL*Net research or how-to drill down network related ORA errors
Hope this will help you.
Regards,
Gaurav
Similar Messages
-
SAP GUI720 error 10061. Partenr 'sapdev:sapdp00' not reached
Hi all,
The problem is I cannot connect and log on via SAPGUI.
I am very new to SAP. I have just managed to install SAP ECC6.0 on my laptop running server 2008 service pack2. It created another user account "IDSAdmin" itself when the installation finished. Everey thing (SAP ECC, Oracle, Java) is 64 bit.
But the GUI is 32 bit and after installation when I tried to connect some error comes up. Error details are
partner sapdev:sapdp00' not reached
Time: ....................
component NI(network Interface)
Release 720
Version 40
Module nixxi.cpp
Line 3255
Method Nipconnect2:192.168.25.25:3200
system call connect
Error No 10061
Error text WSAECONNREFUSED:Connect refused
Counter 1
Please help me to log on. I want learn SAP very desperately. Please help.
i checked online for thi problem but couldn't find any solution that I understood. services file has the 3600/TCP entry. I dont know how to check sap whether its running or not???? Please please help.
Edited by: bilal_zain on Mar 8, 2012 2:39 AMDear Bilal,
Please check the SAP Management Console whether SAP Server is up and running or not.
Refer to http://help.sap.com/saphelp_nw70/helpdata/en/8b/6e1e48c00711d2890d0000e8200722/content.htm
Please try to ping the server and update the host file entry with server ip address and host name. Now please check it again.
Best Regards
Arun Jaiswal -
After installation getting error(sapdp00: not reached)
Hi everyone,
I installed the Netweaver sp12 ABAP trial version on my system. I have windows XP as OS. The installation was error free and I my system is not connected to any network. I created NSP local and configured as in the html file start.html. But when I try to log in using this NSP local I get an error message that says sapdp00: not reached. I dont know what to do now. maybe some problem in configuring the loop back adapter or somr other network issue. It would be a great help if someone can help me out.
The actual error message :
partner '127.0.0.1:sapdp00' not reached
WSAECONNREFUSED: Connection refused
Regards,
Mayank
Edited by: Mayank Vatsal on Mar 12, 2008 5:23 AM> an error that says Win+disp.exe has encountered a problem and needs to close down..
Yaiks, that sounds as if Windows is killing the services as soon as they're started. Maybe the SAP software is interfering with some other program(s) on your PC and that could be a very difficult one to find. -
ERROR partner 'localhost:sapgw00' not reached
Hi,
i have BI system with portal. when i am trying to connetct portal with url http://<hostnaem>/<ip>:<portnumber>/irj/portal ---it is displaying as 500 internel server error with java.lang.NullPointerException: null .
i am keeping here two logfiles 1.dev_jrfc.trc 2.defaulttrace.trc here under for your reference.
1..dev_jrfc.trc --log
Error> occured >Tue Feb 17 04:52:46,483<
RfcException:
message: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=localhost SYSNR=00 GWHOST=localhost GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 'localhost:sapgw00' not reached
TIME Tue Feb 17 04:52:46 2009
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2513
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 146
ERRNO TEXT Connection refused
COUNTER 10
Return code: RFC_FAILURE(1)
error group: 102
key: RFC_ERROR_COMMUNICATION
Error> occured >Tue Feb 17 04:52:46,503<
RfcException:
message: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=localhost SYSNR=00 GWHOST=localhost GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 'localhost:sapgw00' not reached
TIME Tue Feb 17 04:52:46 2009
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2513
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 146
ERRNO TEXT Connection refused
COUNTER 12
Return code: RFC_FAILURE(1)
error group: 102
key: RFC_ERROR_COMMUNICATION
2.DefaultTrace.trc --log
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[./log/defaultTrace.trc]/>
<!PATTERN[defaultTrace.trc]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[UTF8]/>
<!FILESET[14, 20, 10485760]/>
<!PREVIOUSFILE[defaultTrace.13.trc]/>
<!NEXTFILE[defaultTrace.15.trc]/>
<!LOGHEADER[END]/>
#1.5 #00144FAC097C006C000000550000723800045E43F3A75D87#1229545850494#com.sap.engine.services.security#sap.com/tcjetrace~app#com.sap.engine.services.security#J2EE_GUEST#0##n/a##2f24ad50cc6c11dd974500144fac097c#SAPEngine_Application_Thread[impl:3]_9##0#0#Error#1#/System/Security#Java#security_3031##Cannot get run_as identity for the security role "admnistrator".#1#admnistrator#
#1.5 #00144FAC097C006C000000560000723800045E43F3A776EC#1229545850500#com.sap.engine.services.security#sap.com/tcjetrace~app#com.sap.engine.services.security#J2EE_GUEST#0##n/a##2f24ad50cc6c11dd974500144fac097c#SAPEngine_Application_Thread[impl:3]_9##0#0#Error#1#/System/Audit#Java###Exception #1#com.sap.engine.services.security.exceptions.BaseSecurityException: Cannot get run_as identity for the security role "admnistrator".
at com.sap.engine.services.security.roles.SecurityRoleContextImpl.getRunAsIdentity(SecurityRoleContextImpl.java:662)
at com.sap.engine.services.security.roles.SecurityRoleReference.getRunAsIdentity(SecurityRoleReference.java:183)
at com.sap.engine.services.servlets_jsp.server.runtime.context.SessionServletContext.getSubject(SessionServletContext.java:598)
at com.sap.engine.services.servlets_jsp.server.runtime.context.ApplicationContext.getSubject(ApplicationContext.java:893)
at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.destroyServlets(WebComponents.java:720)
at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadDestroyer.run(ApplicationThreadDestroyer.java:62)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.security.api.PrincipalNotAccessibleException: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=localhost SYSNR=00 GWHOST=localhost GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 'localhost:sapgw00' not reached
TIME Wed Dec 17 15:30:50 2008
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2513
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 146
ERRNO TEXT Connection refused
COUNTER 16
at com.sap.security.core.imp.AbstractPrincipal.getPrincipalDatabagValues(AbstractPrincipal.java:1787)
at com.sap.security.core.imp.Principal.setDirectChildrenInternal(Principal.java:501)
at com.sap.security.core.imp.AbstractPrincipalSet.getUserMembersInternal(AbstractPrincipalSet.java:393)
at com.sap.security.core.imp.AbstractPrincipalSet.getUserMembers(AbstractPrincipalSet.java:210)
at com.sap.security.core.imp.AbstractPrincipalSet.getUserMembers(AbstractPrincipalSet.java:129)
at com.sap.security.core.imp.GroupWrapper.getUserMembers(GroupWrapper.java:29)
at com.sap.security.core.server.userstore.GroupInfoUME.engineGetUsersInGroup(GroupInfoUME.java:181)
at com.sap.security.core.server.userstore.GroupContextUME.engineGetUsersOfGroup(GroupContextUME.java:379)
at com.sap.engine.services.security.userstore.context.GroupContext.getUsersOfGroup(GroupContext.java:191)
at com.sap.engine.services.security.roles.SecurityRoleContextImpl.getUserFromGroup(SecurityRoleContextImpl.java:775)
at com.sap.engine.services.security.roles.SecurityRoleContextImpl.getUserFromRole(SecurityRoleContextImpl.java:763)
at com.sap.engine.services.security.roles.SecurityRoleContextImpl.generateValidRunAsPrincipal(SecurityRoleContextImpl.java:719)
at com.sap.engine.services.security.roles.SecurityRoleContextImpl.getRunAsIdentity(SecurityRoleContextImpl.java:610)
... 9 more
#1.5 #002128049C66006D00000049000023EF0004631BF918D17E#1234871701262#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#sap.com/irj#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#J2EE_GUEST#0##n/a##ce792bd0fce911dda3de002128049c66#SAPEngine_Application_Thread[impl:3]_12##0#0#Error##Plain###application [irj] Processing HTTP request to servlet [gateway] finished with error. The error is: java.lang.NullPointerException
at com.sap.portal.navigation.Gateway.service(Gateway.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
#1.5 #002128049C66006D0000004B000023EF0004631BF918E565#1234871701267#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/irj#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#J2EE_GUEST#0##n/a##ce792bd0fce911dda3de002128049c66#SAPEngine_Application_Thread[impl:3]_12##0#0#Error#1#/System/Server/WebRequests#Plain###application [irj] Processing HTTP request to servlet [gateway] finished with error.
The error is: java.lang.NullPointerException: null
Exception id: [002128049C66006D00000049000023EF0004631BF918D17E]#
#1.5 #002128049C66007200000033000023EF0004631BFBCDBE0A#1234871746674#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#sap.com/irj#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#J2EE_GUEST#0##n/a##e98aa520fce911ddb1ff002128049c66#SAPEngine_Application_Thread[impl:3]_18##0#0#Error##Plain###application [irj] Processing HTTP request to servlet [gateway] finished with error. The error is: java.lang.NullPointerException
at com.sap.portal.navigation.Gateway.service(Gateway.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
#1.5 #002128049C66007200000035000023EF0004631BFBCFAC76#1234871746800#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/irj#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#J2EE_GUEST#0##n/a##e98aa520fce911ddb1ff002128049c66#SAPEngine_Application_Thread[impl:3]_18##0#0#Error#1#/System/Server/WebRequests#Plain###application [irj] Processing HTTP request to servlet [gateway] finished with error.
The error is: java.lang.NullPointerException: null
Exception id: [002128049C66007200000033000023EF0004631BFBCDBE0A]#
#1.5 #002128049C66006700000026000023EF0004631DEA2AFCFF#1234880040729#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#sap.com/irj#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#J2EE_GUEST#0##n/a##392f0090fcfd11ddbd79002128049c66#SAPEngine_Application_Thread[impl:3]_26##0#0#Error##Plain###application [irj] Processing HTTP request to servlet [gateway] finished with error. The error is: java.lang.NullPointerException
at com.sap.portal.navigation.Gateway.service(Gateway.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
#1.5 #002128049C66006700000028000023EF0004631DEA2B0507#1234880040731#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/irj#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#J2EE_GUEST#0##n/a##392f0090fcfd11ddbd79002128049c66#SAPEngine_Application_Thread[impl:3]_26##0#0#Error#1#/System/Server/WebRequests#Plain###application [irj] Processing HTTP request to servlet [gateway] finished with error.
The error is: java.lang.NullPointerException: null
Exception id: [002128049C66006700000026000023EF0004631DEA2AFCFF]#
please help on this issueHi,
Somewhere the address is not getting resolved. I would suggest you to enter IP address instead of the hostname in the RFC (SM59).
Hope this helps.
Manoj Chintawar -
Dear All,
We installed SAP 7.0, in windows 2003 server
Due to power maintenance schedule, we shutdown the machine. Then restart of my server after 5 Hours.
while SAP login following error shows. "sapdp00" not reached. WSAECONNREFUSED connection refused.
Any one help me to resolve this issue.Thankx Mr. Dey. for your valuable answer.
My problem resolved by following your query from our Corporate Helpline. -
Portal - BI, sapdp00 not reached, WSAECONNREFUSED: Connection refused
Hello,
I have a problem with the connection between portal 7.0 and bi 7.0. I want to logon into the bi over the portal.
The bi and the portal are on the same host. It´s an ABAP + Java installation.
1. I created the connection in the portal
System Administration -> System Configuration -> SLD
I chose New -> System (from PAR) -> SAP_R3_Dedicated
Then I gave follow parameters:
Application Host: http://
I hope anyone can help me to solve the problem.
Thanks a lot!
MarcelI tryed some other constellations betwen Portal and BI.
In the first post both systems are on the same server.
s1 = server 1, s2 = server 2
1. try
BI = s1
Portal = s1
browser = s1
result = it works
2. try
BI = s1
Portal = s1
browser = s2 (or an other PC)
result doesn´t work
3. try
I have a second portal on an other server
BI = s1
Portal = s2
browser = s2 (or an other PC)
result doesn´t work
4. try
the second portal but the browser on the server with the bi
BI = s1
Portal = s2
browser = s1
result = it works -
I am a beginner on SAP R/3 .
my laptop configuration is: windows xp média center
1.86Ghz 1G de Ram 80G de HDD.
I have installed all those thing -Full download includes SAPGUI (2 files 1.5GB, 1.25GB)
-Download SAPGUI only! (342 MB)
- Installation Guide (PDF 1.32 MB)
my laptop is not connected to a Lan;when I try to launch my first connexion on
sap with a user account I have the following message:
erreur:sapgui640
partner not reached(host 127.0.0.1 service sapdp00)
wsaeconnrefused:connection refused
thanks in advance for your helpHi,
Have you installed MS Loopback Adapter? If not do so. You need it, if you are not connected to a LAN. For instructions how to install and cofigure it have a look at install help which is included in the dowload.
Regards
Daniel -
Sapgui640 partner not reached (host127.0.0.1service sapdp00)
hi everybody,I really need a help.I am a beginner on SAP world;
my laptop settings:
-microsoft Win XP Média center Edition ver2002-service Pack2
-packardbell centrino-intel 1.86ghz 1Go de Ram
SAP LOGON640
designation:NSP
application server:localhost
ID system:NSP
system number:00
sAP system:R3
my laptop is standalone one therefore I don't have a network at home.when I try
to logon saplogon640 I get this error message:
sapgui 640
partner not reached
(host 127.0.0.1,service sapdp00
wsaeconnrefused:connection refused
(further informations)
component NI(network interface)
release 640
version37
module:nixxi_r.ccp
line8688
method:nipconnect2
return code-10
system call:sipeck pendconn
error no:10061
error text:wsaeconnrefused:cxion refused
please if anyone has already got this matter thanks in advance about your helpI think its a problem with some firewall or the AV, because when i have running avast in my pc appears the same error message and when i shut down the avast i have no problems, also there are too much post like this one with no solution, admins put an eye right there, because many of this is not listed in documentation file, or i think so, are not listed problems like this one.
If someone knows something, ill be glad to read it, and see if its causing the problem the av or what it is, i tell u one more think, my win firewall its also down, im using xp home sp3 and it works properly when the av is not running, thanks -
ABAP Objects - Sapgui 46D - Partner not reached
Im a starter, completely new to SAP ABAP Objects.
Just installed the 2 CDs delivered with the book ABAP Objects from Horst Keller and Sascha Krüger.
Installed on a stand alone portable Windows XP Pro service pack 2.
No other links to SAP or internet.
First I start Start SAP MBS, is OK
Then start SAP Logon 46D
After the selection of a Description I get the following error message.
Partner not reached (host localhost, service sapdp00)
Time
Release 46D
Component NI(network interface)
Version 34
Return Code -10
Module ninti.c
Line 1008
Detail NiPConnect2
System Call SO_ERROR
Error NO 10061
Error Text WSAECONNREFUSED. Connection refused
Counter 1
Can some one explain me what is need in solving this problem. (Im completely new in SAP)
For the moment I could not find a simple explanation on how to solve this.if you look at the installation documentation in the CD there is a prerequisites which will require to you to configure the MS loop back adapter by entering a specific IP address. check out the documentation in the CD.
Regards
Raja
When you have the latest ABAP NW2004s available for download in SDN why do you want to go for the old one. Unless otherwise there is any specific reason i would strongly suggest you to download the latest minisap (SAP netweaver sneakpreview ABAP NW2004s ) -
SAP Netweaver 2004s Sneak Preview - Partner not reached
Hi all,
I've tried to search the forum for similar message but couln't find it so I post a new one, hopefully someone able to give some help.
I've installed the SAPNW sneak preview ABAP on XP, right after installation I'm able to logon to NSP system. But once I shutdown the computer and turn it on again, I won't be able to access the NSP.
The error message:
"partner not reached (host 127.0.0.1, service sapdp00)
WSAECONNREFUSED: connection refused
I'm not sure what happened, btw:
1. I have installed the MS loopback adapter
2. I've check the C:\windows\system32\drivers\etc\hosts & services file. Looks ok, I put them below for your reference
3. I've check the services,SAPNSP_00 & SAPDB: NSP are running
Is there anything need to be setup? Thanks a lot
C:\WINDOWS\system32\drivers\etc\services
sapdp00 3200/tcp
sapdp01 3201/tcp
sapdp02 3202/tcp
sapdp03 3203/tcp
sapdp04 3204/tcp
sapdp05 3205/tcp
sapdp06 3206/tcp
sapdp07 3207/tcp
sapdp08 3208/tcp
sapdp09 3209/tcp
sapdp10 3210/tcp
sapdp11 3211/tcp
sapdp12 3212/tcp
sapdp13 3213/tcp
sapdp14 3214/tcp
sapdp15 3215/tcp
C:\WINDOWS\system32\drivers\etc\hosts
127.0.0.1 localhostHi
Try
#127.0.0.1 localhost
127.0.0.1 <computer name>
If the computer name is ABC but a reverse lookup returned localhost. This will lead to problem later on when starting the web application server.You can correct this problem by inserting a line 127.0.0.1 ABC into the host file.
Thanks
Prince -
Erro "Partner not reached" - web service from ABAP
Hi.
I wrote a a sample web service call from abap program from net.
But, when I executed, i am getting error 404 resource not found, partner not reached.."Connection request from (19/1132/0) to host: www.webservicex.net, service: 80 failed (NIEHOST_UNKNOWN)"..
Not sure if any settings need to be done before running this ABAP program..
Pl let me know how to proceed further.
Thanks & Regards
KrishHi,
You should check if your server has internet access, may be there is a proxy who block the access.
If you have a proxy you can configure your proxy settings via SMICM.
Regards, Gilles. -
HTTP receiver adapter : message not reaching partner
Hi,
Scenario: IDOC -> PI7.0 -> HTTP
Idoc has to be routed after mapping to XML message to partner via HTTP post.
Partner says, he has not received any message from PI.I can see successful status in SXMB_MONI. As HTTP adapter is not part of adapter framework, so I can not see message under Adapter engine in RWB, Right?
Outbound message has DTD reference, is this should cause any problems?
One more thing, under sxmb_moni, under trace I can see message
"HTTP code:200, Ok".
How can I ensure that PI has sent successfully message to partner.
Please note that for HTTP adapter configuration: I have created HTTP destination on XI system with URL, service number and path prefix. It is successful.
Best Regards,
DivyeshFor the already executed scenario, there is nothing much you can do now. sxmb_moni is the last point for monitoring the http related call. For the traces you may check transaction sicf
http://help.sap.com/saphelp_nw04/Helpdata/EN/80/b2dd3a6dac703be10000000a11405a/content.htm
You may use TCPGateway to trace further calls.
/people/stefan.grube/blog/2007/03/29/troubleshooting-soap-http-and-mail-adapter-scenarios-with-tcpgateway
Regards,
Prateek -
Sap-nw:3300 not reached error in gateway
Dear experts,
I am facing a strange problem after a successful installation of netweaver Java+abap.
when i start the server i found this error
**** ERROR file opened at 20100131 114242 Arab Standard T, SAP-REL 700,0,113 RFC-VER 3 911150 MT-SL
T:2844 Error in program 'igsmux': ======> CPIC-CALL: 'SAP_CMNOREGTP'
LOCATION CPIC (TCP/IP) on local host
ERROR partner 'sap-nw:3300' not reached
TIME Sun Jan 31 11:42:42 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2770
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 1
i ignore the error and i tried to login
after successful login to the portal server when i access the user administration tab. the explorer show
SAP WebAS Engine is starting...
If this state does not change within a few minutes,
please contact your system administrator.
Check the recommendations in SAP Notes: 943498, 764417
Message: Dispatcher running but no server connected!
and the server turns to yellow again when it turns to green again
i checked dev_rd
Sun Jan 31 13:11:15 2010
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 9 / sock 268
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1205) [nixxi.cpp 4424]
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 6 / sock 304
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1148) [nixxi.cpp 4424]
***LOG S23=> GwIDisconnectClient, client disconnected (006) [gwxxrd.c 11592]
***LOG S74=> GwIDisconnectClient, client disconnected ( sap-nw) [gwxxrd.c 11603]
***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c 11638]
***LOG S0I=> GwIDisconnectClient, client disconnected ( jlaunch) [gwxxrd.c 11651]
* LOCATION SAP-Gateway on host sap-nw / sapgw00
* ERROR connection to partner 'sap-nw:1148' broken
* TIME Sun Jan 31 13:11:15 2010
* RELEASE 700
* COMPONENT NI (network interface)
* VERSION 38
* RC -6
* MODULE nixxi.cpp
* LINE 4424
* DETAIL NiIRead
* SYSTEM CALL recv
* ERRNO 10054
* ERRNO TEXT WSAECONNRESET: Connection reset by peer
* COUNTER 232
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 10 / sock 256
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1206) [nixxi.cpp 4424]
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 11 / sock 244
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1208) [nixxi.cpp 4424]
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 12 / sock 232
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1207) [nixxi.cpp 4424]
then i try to login again with the browser it give me
Portal Runtime Error
An exception occurred while processing your request
Exception id: 01:27_31/01/10_6192950
See the details for the exception ID in the log file.
any help would be appreciated
<br>
i also wanted to add that telnet 3300 works fine ping to host name is ok
my os win2003 sap 2004s sr3
Edited by: ebrahime on Jan 31, 2010 11:37 AMthanks for your reply. i wanted to add 2 thing after the installation the password i entered in installation was not working for all the super users that is why i had to delete SAP* from database and change the j2ee_Admin password.
you mentioned that the java stack is unable to communicate with abap stack but i can login to portal by j2ee_admin user. but when i go to identity management then it give the error i gave you earlier.
any way the dev_w0 file contents is bellow
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Tue Feb 02 10:23:01 2010
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\ENP\DVEBMGS00\exe\dbdb6slib.dll' ...
B Library 'F:\usr\sap\ENP\DVEBMGS00\exe\dbdb6slib.dll' loaded
B Version of 'F:\usr\sap\ENP\DVEBMGS00\exe\dbdb6slib.dll' is "700.08", patchlevel (0.144)
C DbSl trace SM50: switch request to level 1
B New connection 0 created
M sysno 00
M sid ENP
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 144
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 1604
M
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1604) [dpxxdisp.c 1305]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 25168 (1480)
M DpShMCreate: sizeof(tm_adm) 5652128 (28120)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010E70050, size: 6348592)
M DpShMCreate: allocated sys_adm at 0000000010E70050
M DpShMCreate: allocated wp_adm at 0000000010E72150
M DpShMCreate: allocated tm_adm_list at 0000000010E783A0
M DpShMCreate: allocated tm_adm at 0000000010E78400
M DpShMCreate: allocated wp_ca_adm at 00000000113DC2A0
M DpShMCreate: allocated appc_ca_adm at 00000000113E2060
M DpShMCreate: allocated comm_adm at 00000000113E3FA0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000001146AC30
M DpShMCreate: allocated gw_adm at 000000001146ACB0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000001146ACE0
M DpShMCreate: allocated wall_adm at 000000001146ACF0
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Tue Feb 02 10:23:02 2010
M ThInit: running on host ENP
M
M Tue Feb 02 10:23:03 2010
M calling db_connect ...
C Registering callback for dynamic profile parameters
C DB2 library successfully loaded DB2 library 'F:\usr\sap\ENP\DVEBMGS00\exe/db6_clidriver\bin\db2app64.dll' successfully loaded
C
C DB6 (DB2 UDB) UNICODE database interface 700.08 [opt]
C
C DB6 shared library (dbdb6slib) patchlevels
C (0.8) DB6: V8.2.2 optguidelines in OPEN SQL (note 150037)
C (0.8) Support of SDBUPDEXCL (note 847616)
C (0.9) DB6: use export file for dbdb6slib (note 835135)
C (0.9) DB6: Core in getAndBindSQLDA (note 833183)
C (0.10) DB6: link dbdb6slib.dll on windows with libdb6.obj (note 761159)
C (0.10) DB6: DUPLICATE_KEY on MERGE -> repeat (note 851474)
C (0.15) DB6: wrong CAST for short string ABAP type (note 861905)
C (0.17) DB6: special characters in sidadm passwd (note 865839)
C (0.21) DB6: no SAP_INFO comments (note 873889)
C (0.22) DB6: hints: get correlation names from view texts (note 868888)
C (0.23) DB6: hints: get correlation names from view texts (note 868888)
C (0.26) DB6: DB6_DBSL_CLP_COMMAND STRING_BAD_REF (note 883402)
C (0.27) DB6: activate value compression (note 886231)
C (0.28) DB6: optimization guidelines on views part 2 (note 868888)
C (0.30) DB6: no SQL trace for SQLCancel (note 892111)
C (0.33) DB6: append SAP_TA comment (note 873889)
C (0.34) DB6: activate value compression with quoted names (note 886231)
C (0.36) DB6: Repeat isolated DDL statements after SQL0911 (note 901338)
C (0.41) DB6: add V9 to list of supported DB2 releases (note 912386)
C (0.50) DB6: reread passwords for secondary connections (note 931742)
C (0.52) DB6: double quote table names in optguidelines (note 868888)
C (0.54) DB6: error handling in DBSL CLP (note 940260)
C (0.69) DB6: technical support of DB2 CLI driver (note 962892)
C (0.73) DB6: log table name on TRUNCATE failure (note 970743)
C (0.79) DB6: column type XML in index size calculation (note 982993)
C (0.82) DB6: CAST for SSTRING data types (note 989568)
C (0.86) DB6: long runtimes for R3szchk (note 1000847)
C (0.88) DB6: patch collection Dec 06 (note 1005574)
C (0.96) DB6: patch collection Jan 07 (note 1017852)
C (0.97) DB6: CLP commands with DB2 CLI Driver (note 1024102)
C (0.99) DB6: SUBSTITUTE VALUES with FAE statements (note 1028779)
C (0.107) DB6: patch collection Apr 07 (note 1047194)
C (0.110) DB6: SAP user names ending with non-ASCII char (note 1054555)
C (0.113) DB6: work process type in application snapshot (note 1059905)
C (0.114) DB6: connect using SAPDBHOST and DB2DB6_SVCENAME (note 1062049)
C (0.117) DB6: patch for execution of long DDL statements (note 1069658)
C (0.122) DB6: SNAPSHOT_TBS_CFG table function is deprecated (note 1077963)
C (0.123) DB6: CLP commands on Windows with V9.1 (note 1080149)
C (0.124) DB6: Set DB2CODEPAGE=819 for non-Unicode (note 1084400)
C (0.126) DB6: reuse optguidelines on FAE statements (note 1087375)
C (0.126) DB6: Enforce DB2CODEPAGE=819 for non-Unicode environments (note 1084400)
C (0.128) DB6: db6_free on invalid memory area (note 1092030)
C (0.133) DB6: statement cache enhancements (note 1101031)
C (0.136) DB6: change for enhancement pack installer (note 1111536)
C (0.138) DB6: improoved table size estimate for DB8 V8 (note 1119934)
C (0.144) I5/OS ldappasswd support for 5250 terminal. (note 1129573)
C (0.144) MSSQL: ODBC fastload on separate connection (note 1131805)
C
C Supported features:
C
C ..retrieving configuration parameters
C ..done
C Running with UTF-8 Unicode
C
C Tue Feb 02 10:23:04 2010
C Running with CLI driver
C DB2 client driver version '09.01.0007'
C Connected to DB2 server type 'DB2/NT64'
C Connected to DB2 version '09.01.0007'
C Connect to 'ENP' as 'SAPENP' schema 'SAPENP' o.k.; con_hdl=0
C Database code page is ok.
C Database collating sequence is ok.
C DB2_WORKLOAD=SAP is set in DB2 registry as required.
C CLI Insert Buffering is disabled on single partition databases.
C DbSl trace SM50: switch request to level 1
C DbSlControl: returning SAPDBHOST='ENP'
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20100202 102303 ENP
C DbSlControl: returning SAPDBHOST='ENP'
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Tue Feb 02 10:23:05 2010
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000015400050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FFDDA80050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000015840050, size: 134217728)
M SHM_ROLL_ADM (addr: 000000001D850050, size: 2678942)
M SHM_PAGING_ADM (addr: 000000001DAE0050, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 000000001DB70050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 000000000AE50050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 17, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0000000021540160, size: 30000000, end: 00000000231DC4E0)
B dbtbxbuf: Buffer TABLP (addr: 00000000231E0160, size: 10240000, end: 0000000023BA4160)
B dbexpbuf: Buffer EIBUF (addr: 0000000023BC0170, size: 4194304, end: 0000000023FC0170)
B dbexpbuf: Buffer ESM (addr: 0000000023FD0170, size: 4194304, end: 00000000243D0170)
B dbexpbuf: Buffer CUA (addr: 00000000243E0170, size: 3072000, end: 00000000246CE170)
B dbexpbuf: Buffer OTR (addr: 00000000246D0170, size: 4194304, end: 0000000024AD0170)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 00000000128BEA10
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002DDF00D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002DDF0610
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 11460kb, dir_size: 11392kb.
A Attached to PXA (address 000007FFEDAB0050, size 300000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=000007FF35ED5000 leng=20955136 end=000007FF372D1000)
A >> Shm MMADM area (addr=000007FF363AEF10 leng=244096 end=000007FF363EA890)
A >> Shm MMDAT area (addr=000007FF363EB000 leng=15622144 end=000007FF372D1000)
A RFC Destination> destination ENP_ENP_00 host ENP system ENP systnr 0 (ENP_ENP_00)
A RFC Options> H=ENP,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 35354 bytes at 000000002DF60050
N SsfSapSecin: putenv(SECUDIR=F:\usr\sap\ENP\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is F:\usr\sap\ENP\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...completed with return code 5.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [DB6:700.08]):
B max_blocking_factor = 30, max_in_blocking_factor = 60,
B min_blocking_factor = 1, min_in_blocking_factor = 1,
B prefer_union_all = 1, prefer_join = 1,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x3, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.144.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [16]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N VSI: WP init in ABAP VM completed with rc=0
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume ENP_ENP_00
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Tue Feb 02 10:23:06 2010
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 000000000A960050
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 000000000A9607C0
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 000000000A960800
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 000000000A96080C
M
M Tue Feb 02 10:23:28 2010
M rdisp/rb_cleaned_rfc = 0
A
A Tue Feb 02 10:23:34 2010
A RFC FRFC> fallback on the central gateway ENP sapgw00 activ -
MATMAS01 IDOC not reaching to SAP XI via report program.
Dear Experts,
WE are facing small challenge.
I searched on SDN on scenarios: IDOC not reaching to SAP XI. But could not find exact solution t oour scenario.
Problem:
MATMAS01 IDOC is not reaching to SAP XI via report program and is in status of 03 on SAP system. And there are not entries under SM58.
Under SAP XI system IDOC entry is not reflecting under IDX5 transaction, I tried to delete meta data of MATMAS01 thru IDX1 and uploaded again but still IDOC is not reaching to SAP XI.
The strange is that MATMS01 IDOC is reaching to XI via WE19 test tool. So PORT and RFC destination settings betweeen R3 and XI is also correct.
What could be the wrong ?
Thanks
DivyeshWhen sending Idoc from R/3,
Settings at R/3
create one port at WE21,
Create Partner Profile for Outbound Message type in WE20.
settings at XI
Create one port in IDX1
Import Matadata in IDX2.
Create complete scenario in ESR for Idoc sender, also import IDoc in Imported Objects.
Check these settings & send test idoc using WE19. -
Idoc Not reaching PI even with 03 status
Hi everybody
There are many posts with similar question, but none of them could help me.
I am trying to post an IDOC from one SAP system 3.1 to SAP 6.0 through PI.
I added FIDCC1 to to my partner profile in BD64.
I am creating a invoice and clearing it through f-30 and using the details from the invoice i am trying to trigger an idoc through a program.
Three idocs are getting triggered
1.when i create invoice(f-22)-automatically
2.when I clear invoice (f-30)-automatically
3.When I execute my program
The first two IDOCS are reaching 6.0, but my third IDOC is not reaching. All have same port details and partner profile details.
*All have 03 status in we02 in 3.1*. I am not able to understand why those two are reaching and why the third is not reaching.
None of them are stuck in any queues.
My actual requirement is only the third IDOC to reach 6.0 and I do not even want the first two IDOCs to reach 6.0.
Pls help!
Thank you
Donny
Edited by: Donnesh on Dec 27, 2011 1:14 AMHi Friends,
Thanks for the suggestions.
I have checked with all the above provided suggestions.
But as I have clearly mentioned in the problem that other idocs are reaching well in XI from R3 using the same Port, Partner Profile and RFC.
The error is occuring only with only one idoc in which they have made certain changes (added new segments). I have imported the idoc in Design again and then did the mapping again with the changed idoc.
Before the changes I could receive the Idoc successfully in XI system. I don no what happened after the changes.
If it would have been an authorization problem then I guess the other idocs would not have reached the XI system as well.
I guess the problem is somewhere else..
Thanks in advance.
Maybe you are looking for
-
How can i launch same app on different screen in musca
hi,all i use musca on my laptop, demenu as app launcher, and i connect a 22 inch monitor to my laptop, using separate x window by nvidia, so there is screen 0 and screen 1 when i launch chromium first , it will appear on the screen where i excute the
-
How do I download Photoshop CS6
I am very discouraged right now. I am a student and last semester I needed Adobe Photo shop. It was CS6. It worked great then my trial expired. So I paid for Adobe Creative Cloud and when I downloaded the programs that I needed the photo shop woul
-
¿Should I go for less desviation media absolute or for less total error in forecast?
Hello, I have started using forecast process for automatic reorder level, I have set the system to use automatic mode and I used also "parameter optimization" in order to get the less DMA because it is an indicator for an accurate forecast, but since
-
How do I set up 2-way sync betwn iTunes/iCal/iPod touch?
Hi, I am new to this technology. I have seen many instructions on how to sync the iPod one way from iTunes, and I have read the iPod 4g user manual, but how do I make sure that changes to my calendar or other updates to the iPod then get uploaded to
-
My Zen Vision:M is starting to freeze frequently.And the strange thing is once i go to the recovery mode and 'clean up' it works fine than it will suddenly freeze.Any help or ideas?