Partner number 0000002016 for customer 2348, partner function WE does not e

Hi,
We are getting errors:
SE Partner number 0000002016 for customer 2486, partner function WE does not exist. 3500020146
CH Partner number 0000002016 for customer 2348, partner function WE does not exist. 3500016813
SE Partner number 0000002016 for customer 2486, partner function WE does not exist. 3500020081
etc.
The Idocs are of 51 status.
Message Type - ORDERS
Part.num - ESAPP12400
Part Type - LS
Please help in resolving this issue.
Thanks and Regards,
Sowmya

Hi Holger.
Here are the details.
AG(sold-to) - 2022821583300
WE(ship-to)- 2022821586300
error 1 - VKORG, VTWEG, SPART cannot be determined for customer 2821583300 , vendor.  Message no. VG204
error 2 -Partner number 2821583300 for customer 2022821586300 , partner function WE does not exist. Message no. VG140
<u>EDPAR table entries</u>
1000053---SP-Sold-to party2022821583300---1000053
1000054---SH-Ship-to party2022821586300---1000054
I'm receiving IDOC from XI partner XIDSTF100(LS), is it causing not to recognize sold-to.
Appreciate you help.
Arjun.

Similar Messages

  • Partner number 2821xx for customer 2022821xx ,partner function WE not exist

    Hi Guys,
    I have problem with partner convertion for Inbound ORDERS to SAP.
    <u>Receiver :</u>
    port - SAPID
    Partner - DEVSTF200
    Type    - LS
    Sender:
    Port - SAPXID
    Partner - XIDSTF100
    type - LS
    receive IDOC with status 51 with error - Partner number 2821583300 for customer 2022821586300 , partner function WE does not exist.
    Need some Help.
    Arjun.

    Hi Holger.
    Here are the details.
    AG(sold-to) - 2022821583300
    WE(ship-to)- 2022821586300
    error 1 - VKORG, VTWEG, SPART cannot be determined for customer 2821583300 , vendor.  Message no. VG204
    error 2 -Partner number 2821583300 for customer 2022821586300 , partner function WE does not exist. Message no. VG140
    <u>EDPAR table entries</u>
    1000053---SP-Sold-to party2022821583300---1000053
    1000054---SH-Ship-to party2022821586300---1000054
    I'm receiving IDOC from XI partner XIDSTF100(LS), is it causing not to recognize sold-to.
    Appreciate you help.
    Arjun.

  • Partner number 0010000136 for customer 202154050 , partner function WE does

    hey,
       We i process an inbound 850 Idoc , I get the status message 51 eith the error " Partner number 0010000136 for customer 202154050 , partner function WE does not exist."
    please advise.

    Hi,
    'WE' should be configured for that customer in customization.
    Regards,
    Sujatha

  • How to set partner determination procedure for customer hierarhies.........

    hi,
    sap gurus,
    how to set partner determination procedure for customer
    hierarhies.........
    regards,
    balaji.t
    09990019711.

    Hello Rajesh,
    The PDP is set up in customizing.You must create a regular partner determination procedure.In the IMG choose
    CRM>Basic Functions>Partner Processing-->Define Partner Determination Procedure
    You can define a partner determination procedure for each object type.
    PDP assigned to the object type Campaign can also be campaign-type-dependent.
    IMG:CRM>Marketing>Marketing Planning and Campaign Management>Partner Processing>
    Assign Partner Determination Procedure
    Hope this helps!
    Best Regards,
    Shanthala Kudva.

  • Partner function BP does not exist in partner procedure

    Hi experts,
    I have met the error message "partner function BP does not exist in partner procedure". I think there must be something wrong with my partner determinatino procedure. Is there any clue how I should check it?
    Thank you for your help in advance.
    Best regards,
    Fan

    Hi Fan Mau,
                          Go to "VOPA/VOPAN" and check the partner procedure associated with the account group of you customer(You can get the account group of customer "EXTRAS-ADMINISTRATIVE DATA). If its coming in the sales order header /item ,go to the same transaction "VOPA" AND CHECK THE PROCEDURE ASSOCIATED WITH YOUR SALES ORDER HEADER/ITEM. Kindly please let me know If you need any more information on this.
    Regards
    Ram Pedarla

  • How to create number range for custom object

    Hi all,
    I want to create number range for custom object or custom tables
    Thanks
    Hemalatha

    Hi,
       Thanks, I am able to create a number range for custom object through SNRO tcode.
    Thanks
    Hemalatha

  • IDocs - Business Partner - Error : Function 27 does not exist.... Any idea?

    Hi Gurus,
    I'm trying to transfer a few business partners within CRM server using:
    Basic type:       CRMXIF_PARTNER_REL_SAVE_M02
    Message Type     CRMXIF_PARTNER_REL_SAVE_M
    In a few of the BP IDocs I get the error (Status 51) saying "Function 27 does not exist".
    Can you throw any light on this?
    Thanks & Regards,
    Rahul

    Hi
    Status 51 is not an technical error. It will occur due to incorrect or impure data in the idoc
    Jus check the idoc segments whether it is carrying the correct data in the correct segments.
    Jus get into the details of this error.
    Once you have fixed this error with the help of  business / functional consultants then you can resend or reprocess this idoc using RBDMANI2 Program.
    Cheers,
    Hakim

  • I bought Lightroom 5 and installed it. I was asked for the Serial number and I entered it. But it does not work. Why?

    I bought Lightroom 5 and installed it. I was asked for the Serial number and I entered it. But it does not work. Why?

    To locate the serial number:
    http://helpx.adobe.com/x-productkb/global/find-serial-number.html

  • Serial Number System Status is EDEL and ESTO, SAP does not allow to do PGI

    Hello All,
    We are unable to make PGI for Sales Order 2066904/10 because of wrong Serial Number Status.
    Delivery note was created on the 22.12.2012 and then due to errors deleted on 27.12.2012.
    Problem is that now we need to do PGI but Serial Number System Status is EDEL and ESTO, SAP does not allow to do PGI with Serial Number Status ESTO.
    These 8 products are in Stock and available for this Sales Order, one of the Serial Numbers is with OK Status
    8115001012
    8115001057
    8115001058
    8115001079
    8115001081 with OK status
    8115001180
    8115001181
    8115001690
    Please let us know how to correct the problem so we could do PGI for this Order?
    This scenario is not replicable in RST(Quality System)
    Our Findings:
    ** 1. We have tried IQ02>Edit>Special Serial No Functions>Manual Transactions>To Stock, But it still do not remove EDEL.
    2. Is it suggestible to use T Code BS22 and thereby change PMS8 to Warning? I am not sure regarding this since this a SAP managed Table
    Your help is highly obliged......This is very urgent..........
    Regards,
    Anirban
    SD Consultant

    Hi,
    I have encountered same issue today and here is the solution:
    1. Manually changed the status from EDEL/ESTO to ECUS
        Go to Edit > Special Serial Number Functions > Manual Transaction and select "To Customer", then save.
    2. Once status is in ECUS, change the serial number status back to ESTO.
        Go to Edit > Special Serial Number Functions > Manual Transaction and select "To Stock", then save.
    After doing the 2 steps above, you should be able to do PGI using the serial number.
    Kindly advise if it works for you.
    Regards,
    Vhanie

  • ORA-06571: Function SAM_OUTPUT does not guarantee not to update database

    Hi,
    i created a package as follows,
    CREATE OR REPLACE PACKAGE cursor_test_pak
    AS
    TYPE trans_cursor IS REF CURSOR;
    FUNCTION Cursor_Test
    RETURN trans_cursor;
              FUNCTION sam_output RETURN NUMBER;
    END;
    CREATE OR REPLACE PACKAGE BODY cursor_test_pak
    AS
    FUNCTION Cursor_Test RETURN trans_cursor
    AS
    lv_cursor trans_cursor;
    BEGIN
    OPEN lv_cursor FOR
    SELECT * FROM JAMES_SAM6;
    RETURN lv_cursor;
    END ;
    FUNCTION sam_output RETURN NUMBER
    AS
    lv_cur trans_cursor;
    BEGIN
    lv_cur := Cursor_Test();
    RETURN lv_cur%ROWCOUNT;
    --RETURN 1;
    END;
    END;
    after that i tried the following statement,
    select cursor_test_pak.sam_output() from dual;
    i got the following error,
    ORA-06571: Function SAM_OUTPUT does not guarantee not to update database
    i don't know what does it mean?
    can any one help me in this?
    Thanks,
    james.

    i think use of cursor attribute not possible with cursor variable
    like this : lv_cur%ROWCOUNT; If you are not sure why don't you check ?
    SQL> declare
      2   rc sys_refcursor;
      3   a integer;
      4  begin
      5   open rc for 'select 1 from emp';
      6   loop
      7    fetch rc into a;
      8    exit when rc%notfound;
      9    dbms_output.put_line('CURSOR VARIABLE %ROWCOUNT = ' || rc%rowcount);
    10   end loop;
    11   close rc;
    12  end;
    13  /
    CURSOR VARIABLE %ROWCOUNT = 1
    CURSOR VARIABLE %ROWCOUNT = 2
    CURSOR VARIABLE %ROWCOUNT = 3
    CURSOR VARIABLE %ROWCOUNT = 4
    CURSOR VARIABLE %ROWCOUNT = 5
    CURSOR VARIABLE %ROWCOUNT = 6
    CURSOR VARIABLE %ROWCOUNT = 7
    CURSOR VARIABLE %ROWCOUNT = 8
    CURSOR VARIABLE %ROWCOUNT = 9
    CURSOR VARIABLE %ROWCOUNT = 10
    CURSOR VARIABLE %ROWCOUNT = 11
    CURSOR VARIABLE %ROWCOUNT = 12
    CURSOR VARIABLE %ROWCOUNT = 13
    CURSOR VARIABLE %ROWCOUNT = 14
    PL/SQL procedure successfully completed.Rgds.

  • Function SET_AQ_PROPAGATIONWALLET does not exist ???

    Hello,
    I have a question regardint the httpS propgation, in the document Oracle® Streams Advanced Queuing User's Guide and Reference Release 10.1 Part Number B10785-01, it is refenreces EXECUTE DBMS_AQADM.SET_AQ_PROPAGATIONWALLET('/home/myuid/cwallet.sso', 'welcome');
    But the function SET_AQ_PROPAGATIONWALLET does not exists, in the dbms_aqadm package. When I reference to an earlier docment version, it's no more mentionned and neither an alternative. My question is is there anything, a config or process, with replace this procedure so that we can use the wallet for the https propagation ?
    Thansk for all,
    Pascal

    I have contacted the person that wrote the document you cite and asked them to respond in this thread.
    I can find no evidence that the procedure exists.

  • Function 0012 does not exist  when saving contact???

    Has anyone seen these before??
    I also get Function 0022 does not exist errors also?
    Thanks

    Hi,
    If you want any particular or number of fields output in UPPER case for an RT service, open the particular service related job in work space area-> open the particular query transform-> select the output schema -> select the field on which you want to apply UPPER case. In the field related Mapping area you will find the TABLE_NAME.FIELD_NAME structure, go to start of the TABLE_NAME in the same structure -> select FUNCTION..from the Function Category -> select String Function, from the function name select UPPER -> click Next, don't select anything from Input String drop down box simply click on Finish.
    it will show you following structure:
    UPPER()TABLE_NAME.FIELD_NAME , drag drop tablename.fieldname in UPPER function. After doing this it should show as:
    UPPER(TABLE_NAME.FIELD_NAME)
    Save the program and Execute..Output for particular field will display in UPPER case.
    Hope this helps..

  • Using a dll function that does not have any inputs from a VI

    Hello all, I'm very new to Labview, I have wraped a dll library using the LVlib wizard and now I am trying to use it in a project.  I have a function that does not take any inputs or return any thing except that a struct is populated with some status information as part of the call.  I am able to draw a StartInterface VI because my void startInterface(const char* configFile, struct status_struct* status) takes the location of a configutation file as an input. But I can not figure out how to connect my Call Library Node to my a function vi that does not have any inputs ( void shutdownInterface(struct status_struct* status)). 
    Note that the status struct is deffined to be only and out put at the creation of the LVLIB.
    Thanks, Mike

    Thanks for the responses guys:
       I think I am aware of the conotations of inputs and outputs when I created the lvlib I specified the argument  struct status_struct* status as only an output instead of the default of input and output.
    I do not think that I am doing anything as complex as function callbacks. My immediate goal is to have an executable (I have application builder) with two buttons and two three text fields one text field for the input of the config file, two text-fields for a cstring that is contained in the status struct; one button to start the interface and one button to stop the interface. 
    This is in all likely hood a case of my self being too dense and missing something fundimental ;-)  I just can't figure out how to wire the shut down method after I've configured the call library node. See the attached pictures:
    Attachments:
    Start.jpg ‏7 KB
    shurtdown.png ‏9 KB

  • Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB

    Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB conncected, both worked well before, but both now spinning, blinking, and not showing up on the screen as before,
    Interestingly they both appear in the System Profiler, but just not working the same as before
    I have tried other USB ports, but the same responce,

    yes I did reset the PRAM, but no benefit, still the same problem
    my usb devices are:  keyboard, mouse, printer, SD-USB-M3, and LaCie d2 DVDRW:
    the mouse and printed are plugged into the keyboard: i have tried to move, these around, and have even tried just the mouse, printer and SD-USB-M3, but still the same problem
    here is a cut and paste of the current  "System Profiler>Hardware>USB"   (usb device tree)
    USB Bus:
      Host Controller Location:          Built In USB
      Host Controller Driver:          AppleUSBOHCI
      PCI Device ID:          0x0026
      PCI Revision ID:          0x0000
      PCI Vendor ID:          0x106b
      Bus Number:          0x18
    Hub in Apple Pro Keyboard:
      Version:          1.22
      Bus Power (mA):          500
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Mitsumi Electric
      Product ID:          0x1002
      Vendor ID:          0x05ac  (Apple Computer, Inc.)
    HL-1270N series:
      Version:          1.00
      Bus Power (mA):          100
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Brother
      Product ID:          0x0008
      Serial Number:          L9J286292
      Vendor ID:          0x04f9
    Basic Optical Mouse:
      Version:          0.00
      Bus Power (mA):          100
      Speed:          Up to 1.5 Mb/sec
      Manufacturer:          Microsoft
      Product ID:          0x0084
      Vendor ID:          0x045e
    Apple Pro Keyboard:
      Version:          1.22
      Bus Power (mA):          250
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Mitsumi Electric
      Product ID:          0x0204
      Vendor ID:          0x05ac  (Apple Computer, Inc.)
    SuperDisk USB 120MB drive:
      Version:          0.0e
      Bus Power (mA):          500
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Imation
      Product ID:          0x0002
      Vendor ID:          0x0718
    Hub in Apple Pro Keyboard:
      Version:          1.22
      Bus Power (mA):          500
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Mitsumi Electric
      Product ID:          0x1002
      Vendor ID:          0x05ac  (Apple Computer, Inc.)
    HL-1270N series:
      Version:          1.00
      Bus Power (mA):          100
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Brother
      Product ID:          0x0008
      Serial Number:          L9J286292
      Vendor ID:          0x04f9
    Basic Optical Mouse:
      Version:          0.00
      Bus Power (mA):          100
      Speed:          Up to 1.5 Mb/sec
      Manufacturer:          Microsoft
      Product ID:          0x0084
      Vendor ID:          0x045e
    Apple Pro Keyboard:
      Version:          1.22
      Bus Power (mA):          250
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Mitsumi Electric
      Product ID:          0x0204
      Vendor ID:          0x05ac  (Apple Computer, Inc.)
    HL-1270N series:
      Version:          1.00
      Bus Power (mA):          100
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Brother
      Product ID:          0x0008
      Serial Number:          L9J286292
      Vendor ID:          0x04f9
    Basic Optical Mouse:
      Version:          0.00
      Bus Power (mA):          100
      Speed:          Up to 1.5 Mb/sec
      Manufacturer:          Microsoft
      Product ID:          0x0084
      Vendor ID:          0x045e
    Apple Pro Keyboard:
      Version:          1.22
      Bus Power (mA):          250
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Mitsumi Electric
      Product ID:          0x0204
      Vendor ID:          0x05ac  (Apple Computer, Inc.)
    SuperDisk USB 120MB drive:
      Version:          0.0e
      Bus Power (mA):          500
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Imation
      Product ID:          0x0002
      Vendor ID:          0x0718
    USB Bus:
      Host Controller Location:          Built In USB
      Host Controller Driver:          AppleUSBOHCI
      PCI Device ID:          0x0026
      PCI Revision ID:          0x0000
      PCI Vendor ID:          0x106b
      Bus Number:          0x19
    LaCie d2 DVDRW USB:
      Capacity:          451.76 MB
      Removable Media:          Yes
      Detachable Drive:          Yes
      BSD Name:          disk2
      Version:          0.00
      Bus Power (mA):          500
      Speed:          Up to 12 Mb/sec
      Manufacturer:          LaCie
      OS9 Drivers:          No
      Product ID:          0x1011
      Serial Number:          FFFFFFFFFFFF
      S.M.A.R.T. status:          Not Supported
      Vendor ID:          0x059f
    LaCie d2 DVDRW USB:
      Capacity:          451.76 MB
      Removable Media:          Yes
      Detachable Drive:          Yes
      BSD Name:          disk2
      Version:          0.00
      Bus Power (mA):          500
      Speed:          Up to 12 Mb/sec
      Manufacturer:          LaCie
      OS9 Drivers:          No
      Product ID:          0x1011
      Serial Number:          FFFFFFFFFFFF
      S.M.A.R.T. status:          Not Supported
      Vendor ID:          0x059f

  • Value Misc. Allowance for the flexfield segment Expense Type does not exist

    Dear All,
    can any budy help me out in Internet Expense modulee
    Error:- Value Misc. Allowance for the flexfield segment Expense Type does not exist in the value set OIE_EXPENSE_TYPES.
    Problem details:- we have define one expense templates " Relocation Expnse" under this we have define number of expense items ,in which Misc. Allowance is one
    Prevously it was end dated but now end date is removed , now when we are trying to claim expense against this item we are getting the above error.
    can you please tell me why this is happining and what is the solution.
    Regard
    Ajay Sharma

    Check these things
    1. you have enable PerPeriodOfService DFF to this set.
    2. you are setting Context Variable like (AttributeCategory) with requried value.
    Thanks

Maybe you are looking for

  • 200-300fps camera recommendation

    Hi there, I'm looking to buy a camera for use with vision/machine inspection tools. I need 200-300fps. Currently I use a cheap Casio consumer camera and do the analysis offline but am looking at USB3.0 DirectShow compliant camera like this one:  http

  • Intercompany Sales for 3 companies

    Hi All Expert, I am now facing big problem in setting of Intercompany sales. Now I want to set a new Company C, with Sales and Bill to Oversea customer, but goods are purchased from Company B, and the goods are produced by Company A and Ship to Custo

  • What SMP Role is needed to create an Agentry application in SCC?

    Hi, I'm in a SMP 2.3 SP3 (Patch 1) environment and I'm wandering what is the minimum security role that I need to give the development team for them to be able the create, update or import an Agentry Application. Is the only solution a "SUP Administr

  • Is ORACLE SQL DEVELOPER up to other Tools?

    Hi Experts, Am new to Oracle SQL Developer Tool. Can anyone tell me what are the drawbacks of this ORACLE SQL DEVELOPER. Is SQL DEVELOPER up to other Tools? Thanks in Advance! Regards, Anup

  • How do you add other calanders to ical without having to view separately?

    i know you view outside calanders of friends through ical by selecting window and then say shane's gmail but is there a way to view those calanders integrated into one?