Partner number 0010000136 for customer 202154050 , partner function WE does

hey,
We i process an inbound 850 Idoc , I get the status message 51 eith the error " Partner number 0010000136 for customer 202154050 , partner function WE does not exist."
please advise.

Hi,
'WE' should be configured for that customer in customization.
Regards,
Sujatha

Similar Messages

Partner number 0000002016 for customer 2348, partner function WE does not e

Hi,
We are getting errors:
SE Partner number 0000002016 for customer 2486, partner function WE does not exist. 3500020146
CH Partner number 0000002016 for customer 2348, partner function WE does not exist. 3500016813
SE Partner number 0000002016 for customer 2486, partner function WE does not exist. 3500020081
etc.
The Idocs are of 51 status.
Message Type - ORDERS
Part.num - ESAPP12400
Part Type - LS
Please help in resolving this issue.
Thanks and Regards,
Sowmya

Hi Holger.
Here are the details.
AG(sold-to) - 2022821583300
WE(ship-to)- 2022821586300
error 1 - VKORG, VTWEG, SPART cannot be determined for customer 2821583300 , vendor. Message no. VG204
error 2 -Partner number 2821583300 for customer 2022821586300 , partner function WE does not exist. Message no. VG140
EDPAR table entries
1000053---SP-Sold-to party2022821583300---1000053
1000054---SH-Ship-to party2022821586300---1000054
I'm receiving IDOC from XI partner XIDSTF100(LS), is it causing not to recognize sold-to.
Appreciate you help.
Arjun.

Partner number 2821xx for customer 2022821xx ,partner function WE not exist

Hi Guys,
I have problem with partner convertion for Inbound ORDERS to SAP.
Receiver :
port - SAPID
Partner - DEVSTF200
Type - LS
Sender:
Port - SAPXID
Partner - XIDSTF100
type - LS
receive IDOC with status 51 with error - Partner number 2821583300 for customer 2022821586300 , partner function WE does not exist.
Need some Help.
Arjun.

Hi Holger.
Here are the details.
AG(sold-to) - 2022821583300
WE(ship-to)- 2022821586300
error 1 - VKORG, VTWEG, SPART cannot be determined for customer 2821583300 , vendor. Message no. VG204
error 2 -Partner number 2821583300 for customer 2022821586300 , partner function WE does not exist. Message no. VG140
EDPAR table entries
1000053---SP-Sold-to party2022821583300---1000053
1000054---SH-Ship-to party2022821586300---1000054
I'm receiving IDOC from XI partner XIDSTF100(LS), is it causing not to recognize sold-to.
Appreciate you help.
Arjun.

How to set partner determination procedure for customer hierarhies.........

hi,
sap gurus,
how to set partner determination procedure for customer
hierarhies.........
regards,
balaji.t
09990019711.

Hello Rajesh,
The PDP is set up in customizing.You must create a regular partner determination procedure.In the IMG choose
CRM>Basic Functions>Partner Processing-->Define Partner Determination Procedure
You can define a partner determination procedure for each object type.
PDP assigned to the object type Campaign can also be campaign-type-dependent.
IMG:CRM>Marketing>Marketing Planning and Campaign Management>Partner Processing>
Assign Partner Determination Procedure
Hope this helps!
Best Regards,
Shanthala Kudva.

How to create number range for custom object

Hi all,
I want to create number range for custom object or custom tables
Thanks
Hemalatha

Hi,
Thanks, I am able to create a number range for custom object through SNRO tcode.
Thanks
Hemalatha

"Partner Determination Steps for Customer Master" clarification

Hi,
Let me clear myself at the outset itself, that I searched SDN for my below mentioned query, however I could not find any answer to my satisfaction....here I am posting again
In "Partner Determination for Customer Master", the following steps are undertaken -
Step 1:
1.a.) Create New Partner Determination Procedure
1.b.) For each Partner Determination Procedure, different Partner Functions, which are applicable for that specific determination procedure, are assigned. (along with other properties like if the PF is mandatory, not modifiable )
Step2:
"Partner Determination Procedure Assignment", here we assign different Partner Determination Procedure to different Account Groups. In other words, indirectly, we assign the partner functions to account groups. Right? (Please correct me if I am wrong)
Step3:
"Partner Function". Here we define new partner functions, (which are used in Step 1...)
Step4:
"Account Group- Function Assignment" - Here we assign the Partner Functions to Account Groups
Now My Question
(A) Since the Partner Functions are assigned (via partner determination procedure) to account groups in Step 1, then why Partner Functions are assigned AGAIN to account groups in Step 4. What is the significance of this assignment in Step 4.
(B) Is there is particular sequence of Steps (1 to 5), one should follow when somebody has to create new customer account group and/or new partner function.
Thanking you all in advance.

Dear SR
Leave SAP Partner Determination screen for 2 minutes and first understand the logic
1. Create the new partner functions
2. Create the new determination procedure
3. Link the new partner functions to the new determination procedure and add mandatory, non modifiable ,optional creteria
4. Assign the new determination procedure to the document type or account group at appropriate level
This is essence and this is for all 8 levels like CMR,sales doc header,item etc
Now coming to your qn
When you define a new account group ( you might be aware account group controls partner functions of CMR) you will say that your new account group will carry out patner functions like SP,SH,BP,PY
That is ACCOUNT GROUPS function assignment
Whenever you create a new account group you will do field selection in OBD2 like suppress optional.reqd etc,create no ranges and assign no ranges and also mainly this activity partner determination
These are must settings for a new account group
AG is the german key for sold to party Partner determination procedure
This is step 1
Then in next step you will tell AG will carry out such and such partner functions Step 2 like mandatory not modifiable etc
Step 3 is link the AG to your account group
Step 4 is partner functions say if you want to create a new partner function say SB special stock partner
(in concept this is the firststep)
Step 5 is once again partner function account group assignment
So when you create a new partner function you will do step 4 first and step 5 and then 1 and 2 and 3
when you create a new account group you will do step 5 and then 1 and 2 and 3
Hope you understand now
Partner functions are relatives in your family
Say in a family we have Father ,mother sister, brother (these 4 partner functions)
This is called as Happy Family and this Happy Family is the Partner determination procedure in SAP
This Happy Family is linked to the account group
So Happy family means there are 4 partner functions
So whenever you create a CMR in the account group this father.mother,brother,sister will come as default
Suppose you add another partner function say Uncle
First you have to create uncle
Then you have to tell this account group will accept uncle
Then link the uncle in the happy family that is determination procedure of SAP along with the 4
Then assign happy family to the account group
Now when you create a CMR along with father.mother,brother,sister along with that uncle will also come
Regards
Raja

Maintain Partner Bank Type for customer

Hi,
I have a problem when running the payment proposal via F110.
I want to procede to a customer/vendor clearing, the problem is that the partner bank type is filled for the vendor but not for the customer.
If i want to maintain "partner bank type" for the customer, where should I maintain it?
Could you please advise me?
Thanks in advance,
Soumaya

Hi,
If your client does not want to use this field because the bank details are set for deletion then, refer to OSS Note no.:1016924. Otherwise, please try Substitution in OB28 with the User Exit ZGGBR000 (Copy of RGGBR000).
Regards,
Kiron Kumar T.

Number range for customer

Dear Friends,
How sud I maintain number range for the customer?....

Hi
No ranges are defined customers account groups in t code XN01 and
assigned to the respective account group in t code OBAR
Img-financial accounting (old/new both you can use)-accounts receivable and accounts payable--customer accounts-master data----preparations for creating customer master data
(The whole controls you can see here under this)
Here first you will define your account group (for field selection)
1. T code OBD2 define account groups with screen layout (customer accounts) activity
then you will define no ranges for your account group
2. T code XN01 define no ranges for customer account groups
then you will assign no ranges for your respective account group
3. T code OBAR assign no ranges for account group
You have to go to change intervals and define your pwn available intervals and then assign them to the respective account group
So while you create a customer in XD01 in the respective account group that no range will be automatically assigned if it is internal or we can give our no if it is external
Note if you define a new account group then you have to define partner functions also in img-sd-basic functions-setup partner determination---setup partner determination for CMR apart from the three major activities listed above
Regards
Raja

External Number Range for Customer Master

Hi,
If we give External Number Range for a Customer Account Group in SPRO, Can we let the System to generate the Customer Number(Internal)? Or always we should provide a Number for the customer?
Thanks,
Sekhar.J

Hi,
System will not consider two Number Range Assignment, simultaneously.
Here are few links:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/01/a9b191455711d182b40000e829fbfe/frameset.htm
http://help.sap.com/erp2005_ehp_03/helpdata/EN/53/c9864aca3711d2b494006094b9114a/frameset.htm
http://help.sap.com/erp2005_ehp_03/helpdata/EN/ea/cffb3aebc63b61e10000000a11402f/frameset.htm
Best Regards,
Amit

Sold-to-party default partner id map for customer field in SMCR - ChaRM 7.1

Hi Expert,
I am trying to map sold-to-party partner id default in SMCR- CRM screen (when Request for Change screen open) .
In IB52 ->Goto -> Partner , i gave sold-to-party details.
but its not reflecting in Request for Change screen open in CRm_UI.
Rg,
Karthik

Hi Karthik,
have you deleted from other levels?
Also check below note:
1165357 Sold-to-Party is not assigned to Service Desk messa
1518907 - Solution Manager: wrong partner determination after update to Support Package 24
1165357: Sold-to-Party is not assigned to Service Desk
824640: Customizing missing for Service Desk in Solution Manager
is sold to party have BP organization type?
Thanks
Regards
Vikram

How To create number range for custom BO

Dear All,
I have created a Custom Business Object and i have created its alternative key.. I want an Internal number range to be used against that alternative key.
How do i achieve this functionality?
Regards,
Dhruvin

Hi Dhruvin,
Find the below discussion where I answered to generate number.
Does anyone have sample code to auto generate Alternate key/ID field data
in this example number will start from 1, you can enter your own starting number.
If it help you or have any doubt, let me know.
regard
Sunil

Change from Internal to External Number range for customer account group

Hi,
We would like to change the number range assignment for a customer account group from internal to external. The external number range assignment check box is greyed out as a few numbers in the range have already been used up. We want to do the internal to external assignemnt change, create a customer of a specific number, and revert the range back to internal assignment. Is this possible?
Appreciate your help.
Ram

Hi,
Please do the below steps:-
(1) Go to XDN1 and click on "Maintain status" button. Note down the current status and change the status to zero. Save.
(2) Again go to SDN1 and click on "Maintain No. Range" button, and change the no. range to external. Save. (if that number range is maintained for multiple years, then make it external for the first yer and for the subsequent years, it will become automatically.)
(3) Then create your customer with specific number.
(4) Then go to XDN1 and click on "Maintain No. Range" button, and change the no. range to internal. Save. (if that number range is maintained for multiple years, then make it internal for the first yer and for the subsequent years, it will become automatically.)
(5) Again go to XDN1 and click on "Maintain status" button. Maintain the current status as the number noted down in step (1) above. Save. (In case number created in step (4) is greater than the number notes in step (1), maintain the number of step (4) in current status.)
Regards,
Gaurav

Give "Number of an SD business partner" internally while creating customer

When we create a new custpmer by VD01 or XD01, at the "partner functions" tab, the number for each partner role is given internally. Where is the customization for the internal or external partner number? I want the system to give the partner number internally for the new customer's partner roles but it is externally customized. The partner numbers (which can be seen in "Partner Functions tab") for the new customer being created should be the new customer's own number and should be given internally.
Thanks in advance.

Hi
To assign the internal or external no. range to Customer is based upon the account Group. It can be assigned in IMG, the path is ;- IMG>Financial Accounting>Account receivable account payable.> Customer Account> Master data>Preparation of creating Customer Master data>Assign No. range to customer Account group.
Regards
Amitesh

Number ranges for Business Partner

Hello experts,
Can you please guide how to define different number ranges for differenet different parner functions such Bidder and Employee.
Presently when I create a new employee for a Business partner who has newly registered with SRM, they both are getting same range of BP number, which makes the user list very long to manage/search while creating BID/Auction invitation.
Please guide me. Thanks in advance
Vijay

Hello,
find below the settings of table T77S0 in our system. We use grouping Z4 for org units. Be aware of the fact that number range and grouping have to have the same ID in this case.
Regards
Wolfgang
GRPID SEMID GSVAL      ETEXT
HRALX HRAC X          Activate HR Integration
HRALX MERID X          Enter Integration Error in IDOC
HRALX MSGRE 0          Recipient of Error Message When Creating BP
HRALX OADBP            Business Partner of Standard Address
HRALX OADRE            Address Necessary for Business Partner?
HRALX OBPON ON         Integration O-BP Activated
HRALX OBWIG X          Ignore Business Partner Warnings
HRALX ONUMB 2          Business Partner Number Assignment (Org. Unit)
HRALX OPROL BUP004
HRALX OSUBG Z4         Business Partner Subgroup (Organizational Unit)
HRALX PALEO            Log: Organizational Units in ALE
HRALX PALEP            Log: Employees in ALE
HRALX PBPHR OFF        Employees Are Replicated from HR System
HRALX PBPON ON
HRALX PCATS            Integration P-BP for CATS Activated
HRALX PINAC            Activate ALE Distribution of Inactive Employees
HRALX PLEVE 3          Log: Detail Level of Error Messages (1 - 5)
HRALX PNUMB 3          Business Partner Number Assignment (Employee)
HRALX PPROL BUP003
HRALX PQUAL            Import Qualifications
HRALX PRTON            Log Active
HRALX PSUBG            Business Partner Subgroup (Employees)
HRALX PSYNO            Log: Organizational Units in Dialog
HRALX PSYNP            Log: Employees in Dialog
HRALX USRAC X          Create Relationship to User

How to setting for the number range for Business Partner

Dear Sir,
I create the new role for Business Parnter , However, I would like to set the new number range for that buiness Partner with that role.
Please kindly advise what is the step to do.
Thank you and best regards,
Vimol

Hi Vimol,
In CRM standard system it is not possible to link specific role with specific grouping.
To achive the same go to following IMG path:
SAP Implementation Guide>Cross-Application Components>SAP Business Partner>Business Partner>Basic Settings>Number Ranges and Groupings>
Define Groupings and Assign Number Ranges
Hope you selected the opton button for column 'Int Std.
I already suggested a work around above.
Best Regards,
Satish Mathala

Partner number 0010000136 for customer 202154050 , partner function WE does

Similar Messages

Maybe you are looking for