Partner profile for bank

Hi,
I want to create a partner number for banks.
I went to WE20 and i choose partner type B.
Which number i have to give in partner no to save.
i tested with giving of bank no , acct id also. but it is giving errors
Sateesh Kumar

First save partner number in FI12 for house bank. Then proceed to create partner profile

Similar Messages

  • Partner profiles for EDI

    What is the "Partner Profiles for Logical Systems" when maintaining partner profiles for EDI.
    Which kind of partner profile we use when sending payments like wire and ach through bank. Don't we use partner type B for bank or do we use partner tupe LS (logical systesm)?????

    Hi
    LS - Logical system is used for ALE interface , That is interaction with SAP clicnets whether in the Same Server or External servers.
    Main usage is in Intercompany billing where the Different copmnay codes are maintained in different clients
    Each clicent in SAP has a Logical system Defined to it.
    Thanks & Regards
    Kishore

  • Creation of a partner profile for an non sap system

    hi,
    I need to create a partner profile for an non sap system(SQL Server).
    step by step procedure will be useful.

    Hi,
    1>goto SM59 create R/2 connections and give the connection type as 2 and give the receiver address.
    2>create port in we21 tcode.
    3>create partner  profiles in we20 and give the receiver system (LS).
    Regards,
    nagaraj

  • Partner Profile for IDOC - configuration

    Hi..
    I have an inbound IDOC TPSSHT01, which has been extended by adding a Z segment.. But I keep getting an error message.. The IDOC is created with status 56 and the message says "No inbound profile found".. I have configured the Inbound profile to include the message type 'SHIP' in WE20 and also added the message type in WE57 and WE82... Do i need to do any further settings?
    Thanks
    Rishi

    hI,
         Please use transaction code WE20 to generate inbound partner profile
    Goto WE20 transaction of the client 200 where you are posting the idoc and maintain the partner profile for the inbound type for the idoc type and the corresponding message type of SHIP. This is because you would have maintained it as the outbound parameter from client 100. But at the receiver end also you need to configure the same.
    Status 56 comes up when the partner profile for the idoc type is not maintained. Once its maintained, the idocs which you post will go into 53 if its successfully processed and to 51 if its failing due to any inbound processing program validation
    <b>*Reward points</b>
    Regards

  • Idoc setup::Partner profile for Logical system

    HI All,
    I am using Idocs to transmit my invoice details from ECC to PI, but every time I do this for a new customer I have to setup a partner profile for the customer whose invoice is to be sent. I setup the partner profile using WE20, I setup the partner profile for partner type KU(Customer) in the we20,
    Is there any way we can setup partner profile for LS(Logical system) in we20 & I don't have to setup partner profile for each & every customer for which Idoc is to be generated.
    Please provide some useful information/help to handle this business scenario.
    Regards, 
    Saurav Singh

    Hi Saurabh,
    Please refer SAP Note 1103146 and check.
    Please also refer the below link:-
    http://www.sapgeek.net/2011/07/sap-idoc-tutorial-maintain-partner-profile/
    Thanks & regards,
    Rahul Verulkar

  • EDI: partner profile for shipping point or plant

    I want to issue idocs for delivery notes based on shipping point or plant, not shipto party as is usual.
    How can I go about this?
    It looks like I need to create a new partner type. Or can I use logical systems?
    If logical system is used, then how do I make the connection document->LS?
    The external system uses the RCVPRN to determine which warehouse to handle the delivery for.
    I am changing the RCVPRN in a user exit now, but this still requires creating/ changing all partner profiles for shipto parties.
    Any ideas? previous experiences?
    Thanks,
    phillip

    Hi Phillip,
    it looks like I need to create a new partner type. Or can I use logical systems?
    > Yes, you can use LS
    If logical system is used, then how do I make the connection document->LS?
    > You can use FM: MASTER_IDOC_DISTRIBUTE to send the outbound IDOC...
    Regards,
    Hendy

  • Just one partner profile for SAP XI?!

    Hi,
    well i have some thoughts concerning configuring the partner profile on sender side.
    I have different systems to which e.g. IDocs will be send to. Therefore i was thinking to set one partner profile for each connected system.
    But on the other hand it is also possible to just configure one partner profile, e.g. called SAP XI, and seperate the different IDocs inside this partner profile because of different Message-Types of the Outb-parameters, and inside this because of the IDoc-Type.
    So what is the most propriate way to solve this, is there a suggestion by SAP?!
    thx in advance, Jens

    Hey guys,
    Just thought I'd add my experiences here.
    In one of our implementations we created partner profiles with respect to XI. We had multiple source systems , but the Target ECC team was like, we do not care who sends the data to XI, as far as we are concerned we get data from XI. So we create only one partner profile. We agreed to this and so all Idoc's posting from XI had the XI as the sender partner name. The project went into production and things were fine.
    Then comes the next release. And what do we realise, that the same Idoc will not be posted from XI but for different source systems with different formats. The Inbound processing for the idoc was also being changed stating that Idoc from Source system A  needs to be processed with this T code and Idoc's from System B with this code. reason was different bsuiness rules across different geographies.
    Now, at this juncture we realised in vain that it would have been better had we maintained the partner profiles with respect to the End Systems . having it with respect to XI caused issues in the fact that we are unableto trace out which Idoc belonged to which system.
    Since, then we always recommend all partner profiles with respect to End Systems and not with respect to XI. Helps the business also understand how many idoc's were posted for which source system and so on.
    Just my 2 cents and experience here. Would love to heard more on this topic as well.
    Regards
    Bhavesh

  • Partner profile for INBOUND IDOC

    Dear experts,
    Need your help to define partner profile for inbound idoc to R/3 system. There is a third party (Non SAP) based application from which idocs need to be sent to the R/3 system. There is no need to send an outbound idoc from the R/3 system. Can some one please suggest what are the steps to be taken  to b configure the partner profile  in the R/3 system for the inbound idoc?
    Thanks,
    Priyanka

    Hi
    This is not the right location to post this question.
    You got to post this query in Data transfers section of SDN ABAP Development forums
    Now regarding your question,
    You need to create a Logical System with the help of the transaction SALE.
    Assign the created LS to the client with the help of same transaction
    Go to WE20 and create the partner with the same Logical System name
    Now..as you are recieving the Inbound Idoc from external Non-SAP System, you need to maintain the message type in the Inbound Parameters by clicking on ADD Icon over there.
    Before doing the above step, you got to create the connection between SAP and Non-SAP System.
    Use transaction SM59 to do this. Type of connection would be R/3 I guess
    Thanks
    Hope it helps.

  • Error MSG : Create a partner profile for message type 'MATMAS'

    Getting Error MSG : Create a partner profile for message type 'MATMAS'
    While running LSMW Idoc generation process

    See the below link and it has all screen shots how to configure ALE like partner profile,logical systems,RFC
    http://searchsap.techtarget.com/general/0,295582,sid21_gci1130337,00.html

  • Create a partner profile for message type - 'CRMXIF_ORDER_SAVE_M'

    Hi
    I am trying to create IDOC generateion through LSMW.
    i AM GETTING THE MESSAGEcreate a partner profile for message type - 'CRMXIF_ORDER_SAVE_M'
    How do I create this profile??????

    Hi,
    Execute transaction BD64.
    Identify you distribution Model,
    Select the leaf node, and from menu select
    Environment->Generate Partner Profile
    Here in you specify 'Output mode' and 'Processing Mode'.
    Click on Execute.
    Check if any error occurs (Marked with Red color).
    Try creating the IDOCs
    Best Regards,
    Pratik Patel
    Reward with points if it is of any help to you!

  • LSMW: ALE/IDOC, getting the Create a partner profile for message type

    Hi Gurus,
    In my current project, i need to upload the employee data using the ALE/IDOC method with the LSMW
    when i'm generating the idoc in the 13th step, its posing the information message stating that:
    Create a partner profile for message type 'ZEMP_MSG'
    In partner profile i already assigned the message type .
    How to solve this issue, <inappropriate urgency removed by moderator>
    Thnks&regards,
    sree
    Edited by: Thomas Zloch on May 13, 2011 9:55 AM

    This forum's aim is not only to search for information and ask the members questions, but also to share knowledge. When you have asked a question and found a solution, do share with the rest.

  • Partner profile for message type.

    Dear All,
    I am using bapi in lsmw for data conversion.
    I am getting error in 13th step of lsmw, ie, when I execute Start Idoc Generation, it's saying,
    Create a partner profile for message type - MATERIALVALUATION_PRICECHANGE.
    I already created a partner profile and assigned in the initial screen of lsmw.
    Kindly let me know where I am missing.
    Thanks in Advance,
    Ranjan

    See if any of the follwing helps:
    1. The port used in the partner profile should be a file port, not tRFC.
    2. The checkbox 'Unicode Format' for the port LSMW in WE21 should remain unchecked.

  • Multiple Logical Systems in Partner Profile for one instance

    Can we create multiple Logical Systems in Partner Profile (WE20) for one instance or one System?  If it is possible, can we create Logical System with respect to Plant/Country?

    I am not quite sure if I understood your problem completley. But let's see...
    Usually you use on on MSCS Cluster Group per SAP instance. So you have your already existing NW 7.0 ABAP stack in a separated Cluster Group, and you create a new Cluster Group for your new Java system.
    You can find more information about it in this guide here on SDN:
    Link: [High Availability;
    More information about High Availability Setups for SAP System can be found here on SDN:
    Link: [High Availability]
    If you want to use the same database for your clustered ABAP stack and your new Java stack you can do a MCOD installation.
    Please see Link: [SAP Note 388866 - Multiple Components on One Database - Installation|https://service.sap.com/sap/support/notes/388866]
    Hope this helps.
    Best regards,
    Mathias

  • Partner Profile for file to IDOC scenario

    Hi experts,
    I am doing file to Idoc scenario. I did the ALE configuration steps between XI and r/3. For sender (ThirdParty) system, I defined Business system. While defining partner profiles in WE20 I got confused, whether to Give XI logical system Name or Third party logical system name. Please clarify..........
    Thanks
    Manoj

    Hi,
    >>I defined Business system. While defining partner profiles in WE20 I got confused, whether to Give XI logical system Name or Third party logical system name. Please clarify..........
    in most cases you will only use one logical system in WE20
    this will be XI's logical system - and you can route all the traffic
    via this logicail system - this is the most popular case
    for more about IDOCs and XI have a look at my book:
    Mastering IDoc Business Scenarios with the SAP XI
    http://www.sap-press.com/product.cfm?account=&product=H1935
    Regards,
    Michal Krawczyk
    http://mypigenie.com - XI/PI FAQ

  • Generating partner profile for File to Idoc(CREMAS) scenario.

    Dear friend,
    Completed all the steps in SLD, IR and ID.
    I do not know how to create Partner profile and I skipped this step.
    While testing I got the error "Unable to convert sender service  to an ALE logical system".
    I think i got this error because I have not created partner profile.
    Could anybody tell step by step process of creating partner profile including logical system names( Sender and Receiver)?
    I have seen many blogs and i couldn't get clear picture on how to generate partner profile.
    My sender system is XI server and receiver is R/3.
    I have created RFC destination, Port also.
    Thanks in Advance
    Chiru

    generally u create partner profiles using transaction WE20.
    SAP Menu -> Tools -> IDoc Interface/ALE -> Administration -> Runtime Settings -> Partner Agreement (WE20).
    go through this link for step  by steps
    http://help.sap.com/saphelp_nw2004s/helpdata/en/dc/6b808e43d711d1893e0000e8323c4f/content.htm
    http://www.thespot4sap.com/Articles/SAP_ALE_Configuring.asp

Maybe you are looking for

  • IPhone 3GS Charging/Battery Problem: Hardware, Software, or Both?

    Hello everyone, I'm a long time Apple user, but this is the first time I've ever posted on the Apple Support forums. I hope you will please excuse the length of my post, as I believe that relaying the approximate sequence of events here is important

  • At com.sun.xml.stream.xerces.util.SymbolTable.hash(SymbolTable.java:222)

    Hi all, I'm trying to use a gSOAP server and a jax-ws client. I did a first test with WSDLReader to ask the wsdl from the gSOAP server and read it to display all informations. It was ok ! Now I try to call a method whit this code :           URL url

  • Creating an email account?

    Hi, I just bought a new macbook today, and have just put it on, done everything, it's all great! BUT... when you click on mail you have to type in things to configure it... how do you do that? I have a hotmail account, does it work with a hotmail acc

  • UML modeling for class diagrams, could not generate code for modified diagr

    Hi, I'm using Java studio Enterprise for creating class diagrams and generating code from the UML using round trip engineering. I'm able to create class diagrams and generate code from the diagram. I tried modifying java code for classes and saved it

  • Dead pixels - what is the cover?

    I bought a brand new macbook just over a week ago and have just discovered that the screen has a dead pixel. It is in a corner so I never spotted it straight away but now I know it is there it is difficult to ignore. Is this something that is covered