Partner profile of output type equal LS (To a delivery)

Hi,
I want to generate an idoc every time that a delivery is created on the basis of the condition (Shipping point=xxx,delivery type = yyy, loading point = zzz)
So I'm trying to define a logical system (One logical system by default) as partner profile to my output type.
So in transaction V/34, I put that the output type has to be a LS via EDI.
And in transaction VV21 I defined that the LS 'LSYS' has to be my partner by default.
But in my delivery. In the output type header, It's saying that my logical system 'LSYS' isn't a Partner.
What should I do in order to have a logical system as a partner in my delivery.
Thanks in advance

You cannot have a LS as partner in a SD document.
You have to define a partenr definition for each ship-to you use in WE20, and set the right output message in it.
reward points if helpful, pls.
regards
Roberto

Similar Messages

  • Create a partner profile for message type - 'CRMXIF_ORDER_SAVE_M'

    Hi
    I am trying to create IDOC generateion through LSMW.
    i AM GETTING THE MESSAGEcreate a partner profile for message type - 'CRMXIF_ORDER_SAVE_M'
    How do I create this profile??????

    Hi,
    Execute transaction BD64.
    Identify you distribution Model,
    Select the leaf node, and from menu select
    Environment->Generate Partner Profile
    Here in you specify 'Output mode' and 'Processing Mode'.
    Click on Execute.
    Check if any error occurs (Marked with Red color).
    Try creating the IDOCs
    Best Regards,
    Pratik Patel
    Reward with points if it is of any help to you!

  • Error MSG : Create a partner profile for message type 'MATMAS'

    Getting Error MSG : Create a partner profile for message type 'MATMAS'
    While running LSMW Idoc generation process

    See the below link and it has all screen shots how to configure ALE like partner profile,logical systems,RFC
    http://searchsap.techtarget.com/general/0,295582,sid21_gci1130337,00.html

  • LSMW: ALE/IDOC, getting the Create a partner profile for message type

    Hi Gurus,
    In my current project, i need to upload the employee data using the ALE/IDOC method with the LSMW
    when i'm generating the idoc in the 13th step, its posing the information message stating that:
    Create a partner profile for message type 'ZEMP_MSG'
    In partner profile i already assigned the message type .
    How to solve this issue, <inappropriate urgency removed by moderator>
    Thnks&regards,
    sree
    Edited by: Thomas Zloch on May 13, 2011 9:55 AM

    This forum's aim is not only to search for information and ask the members questions, but also to share knowledge. When you have asked a question and found a solution, do share with the rest.

  • Partner profile for message type.

    Dear All,
    I am using bapi in lsmw for data conversion.
    I am getting error in 13th step of lsmw, ie, when I execute Start Idoc Generation, it's saying,
    Create a partner profile for message type - MATERIALVALUATION_PRICECHANGE.
    I already created a partner profile and assigned in the initial screen of lsmw.
    Kindly let me know where I am missing.
    Thanks in Advance,
    Ranjan

    See if any of the follwing helps:
    1. The port used in the partner profile should be a file port, not tRFC.
    2. The checkbox 'Unicode Format' for the port LSMW in WE21 should remain unchecked.

  • WMTA output type not determining in outbound delivery

    Hi,
    Im in is-retail we are using lean WM for automatic transfer order creation, recently we made immediate delivery also, after this auto TO is not creating and  WMTA output  type also not determining in delivery.
    pls help me any body why out put type is not determining and what is the solution?
    Regards,
    MMReddy.

    There could be several reasons. Go to the document and in the extras-output check output determination analysis in the processing log.
    If the output has been created successfully then you need to see your printer determination. Ask basis to check it up. If the problem is that even the print preview is not coming. Check your communication in the output analysis and ensure LOCL is selected. Any other printer will need to be configured.
    If thats done already then check whether you have maintianed the condition record.
    If that too is done then check whether your output type has been assigned to the output procedure and that the output type is listed in the procedure.
    regds
    Jude

  • BAPI Function Get partner profiles of message type

    Hi Gurus!
    Does anyone know any function module or bapi to retrieve the partner profiles / logical system of a message type?
    For example, if message type ZMATMAS is in two different logical systems, I would need to retrieve both those logical system.
    Thanks!
    Adi

    I have played around a bit, and found out that the table where this info is stored is EDP13 - therefore this solves my problem...
    Nevertheless, if anyone knows a good function module/ BAPI please let me know!
    Thanks Gurus!

  • Output type not created for outbound delivery while using SHMNT05 idoc type

    Hi Experts,
    Please help me to solve the below issue.
    Problem:- I want to to generate an IDOC(using type SHPMNT06) once the PGI is done for an outbound delivery.
    Already it is working fine when used DESADV.DESADV01 or DESADV.DELVRY07. But now the output type is not getting created when used SHMNT.SHPMNT06. I have created a separate output type ZPJ7 just as a mirror copy of the earlier output type(ZPJ6) used for DESADV.DELVRY07.
    Question:- Is it possible to use idoc SHPMNT06 instead for DESADV01 or DELVRY07? If yes then what are steps to be followed?
    The reason why SHPMNT06 idoc is planned:- We have a scenario to send outbound delivery to 3rd party system via XI. If the outbound delivery is for National(Not for Export) and PGI is completed then send the idoc straight forward to XI otherwise DO NOT generate the idoc, but just create the delivery. Collect all the deliveries in a transport and send it in a shipment. The shipment details can be sent using SHPMNT idoc. Now from XI perspective, if we can utlitze the same SHPMNT idoc for the National delivery(1st case) then perhaps this will require less effort. Hence shipment idoc is required to be generated when the delivery is created and PGI is done.
    Also it would be great if you can advice some better way to solve above mentioned scenario.
    Many Thanks,
    Sanjay

    There could be several reasons. Go to the document and in the extras-output check output determination analysis in the processing log.
    If the output has been created successfully then you need to see your printer determination. Ask basis to check it up. If the problem is that even the print preview is not coming. Check your communication in the output analysis and ensure LOCL is selected. Any other printer will need to be configured.
    If thats done already then check whether you have maintianed the condition record.
    If that too is done then check whether your output type has been assigned to the output procedure and that the output type is listed in the procedure.
    regds
    Jude

  • Determining only one output type (out of 4) in delivery header

    Hello everyone!
    We have 4 different Label Output Types (in delivery header). And the requirement is to print only 1 output type (depending on Customer No.)
    I made the 4 output types link to one Access Sequence. Defined some condition records for each Output type and defined the same tables in the Access Sequence. So the access sequence has 4 accesses (exclusive flag checked)
    Now when I create a delivery with a Ship To number which has condition records only for only 1 output type. I mean it passes the first Access in my access sequence and hence should only print the output type that has condition record for that "Ship to" number. Yet it is printing all 4 output types.
    Any help is appreciated .
    Regards,

    Hi Vineet,
    Appreciate your help. I was actually getting it right, don't know what I was thinking. It works good.
    regards,

  • Partner profile and partner number in output of order/invoice.

    Hello Experts,
    I want to know how system pick partner profile from output type triggered in sales order/invoice??
    I could see partner profile is different from partner number exist in output triggered in sales order/invoice.
    I want to know the triggering point of idoc from SO/invoice.
    Thanks

    The phrase "ouptut goes to partner" indicates that the partner will be recipient of the output type.  E.g., ship-to partner will be the recipient of the delivery and the delivery note.
    The use of an output partner in the output condition record is used to control the output device used in the output determination - a completely separate issue.
    Unless you are (e.g.) using different printers for outputs which will be sent to different partners, you would likely be better off using a more generic access for your output condition records.
    HTH
    James

  • IDOC triggerred by which Output type?

    Hi Gurus,
    My requirement is to add a new segment in ORDERS05 and populate the values int he Zsegment based on the output type selected.
    I am using same user-exit to populate but i am not sure how to find the output type which user selected.
    How to find the Output type in FM IDOC_OUTPUT_ORDERS?
    Thanks GIRI

    Hi Giri,
    There is no direct provision to Read the Output type from the function module. But you can do this with the following Options.
    1) Find user Exit in PO Transaction while issuing the output. Export the output type from there and import it in your IDOC function module and then do you logic.
    2) Since you are going to Specify the Basic type and Extension in the partner profile you no need to worry about other partners. This extension will not trigger to the other partner and other output types.
    Let me know if you need any further details.
    Thanks,
    Venkat

  • Configuration output type for VL02N - creating output type

    Dear Sapguru,
    I want to configure output type for VL02N transaction for IDOC creation,Here scenario is to connect SAP to third party system in IS retail.
    VL02N- Output type configuration In only return delivery case.
    Can anybody guide step by step cycle configuration for output type.Looking forward for your quick reply.
    Note: Output type required for IDOC,to communicate with third party system,not for print function.
    Thanks.

    Dear Anup,
    If my understanding is correct,
    This seems to be a outbound Idoc scenario where Idoc will be sent by SAP to third party for a return delivery notification.
    Output type configuration steps are as follows :
    1) Identify the standard output type (Application - V2, Transmission Medium - 6 ) for e.g. LAVA which is very close to your requirement.
    2) Use this output type as a reference & create a copy output type of your own.
    3) Use a suitable access sequence or create your own access sequence as per your requirement.
    4) Assign access sequence to the output type.
    5) Maintain output determination procedure (connect your output type to a suitable procedure )
    6) Assign output determination procedure. (to your delivery document type)
    7) Maintain required output condition records through T Code - VV21 against your newly created output type.
    8) Set up the partner profiles as per your requirement (T code - WE20)
    9) Check the reflection/ effects of your new output setup at the delivery document level (VL02N).
    You may quickly access these settings through T codes - NACE.
                                                                                  Tables - TNAPR, NAST
    Hope it will help you in the set up.
    BR,
    Anubhav

  • Output type config error:No communication data has been defined for transmi

    Hi Gurus,
    i have copied an existing output type ZOCT to ZORD . when i change the sales order the output is automatically triggered but is not processed successfully instead it is in red. when i see the processing log i could see the error below.
      green Object 0000000133                                        
      green Output type: UK Sales Order                              
      green  Processing log for program RSNASTED routine ALE_PROCESSING
       RED   No partner profiles (message control) maintained         
    I tried adding communication data in VV11 but i get the below error.
    No communication data has been defined for transmission medium A
    Message no. VK603.
    I am using ordrsp and orders05 in partner profiles and in message control tab i am giving
    V1 ZORD SD10 values.
    Please suggest me to correct these errors. Your help is much appreciated.Thanks.
    Regards.
    Sanjeev

    Hi V V Reddy,
    Thanks a lot for your inputs. I have debugged the program rsnasted at routines and in EDP12 there were repeated entries .
    So i deleted all the partner profiles and created and generated them agian.
    I have also missed to maintain SP partner function in output type partner functions. I do not see any errors now.
    Thank you very much.
    Regards,
    Sanjeev

  • Error "You cannot enter a partner function for output NEU"

    Hi Experts,
    I'm having these error "You cannot enter a partner function for output NEU" (message VN041) when I tried to assign a partner function (e.g OA)  in the conditions records for application "EV" (Purchase outline agreement). The system do not allow me to do this for any doc type (LP, LPA, MK, OA, etc). I'm using t-code NACE or MN08.
    I want to assign partner for key combination "Document Type". The conditions is already there but with no value, so I want to assign partner function "OA" or "VR".
    I already check all the configuration and looks fine. For example, define possible partner functions for output type "NEU" for application "EV" (Purc outline agree).
    Hope you can help me to find the problem.
    Thanks,
    Mairo.

    I have the error in NACE or using tcode MN08.
    As soon I executed those transaction the system shows the condition records created for varios Doc Type (e.g LP, LPA, MK, etc) but with no partner function assigned. For example:
    Doc. Type /  Name                     /             Funct  /   Partner     /            Medium  /  Date/time  /   Language
    LP        /       Scheduling Agreement     /  blank  / blank  /                                          2      /          3   /              EN
    LPA      /      Scheduling Agreement                              / blank    / blank   /                1        /       3         /        EN
    For example, I try to assign function "OA" for Doc. Type "LP", choose value from quickpick. Then when I press enter, the system give me the error "You cannot enter a partner function for output NEU", message no. VN041. Do not allow me to continue, so I have to leave this field blank, with no change.
    Thanks,

  • IDOC output type configuration

    Dear All,
    We are integrating with another system for warehouse management and delivery note print out will be taken from third party system once delivery is created in SAP. When delivery is created, and IDOC DESDAV will be sent to third party system which carries all necessary information for delivery note.
    My question is, to trigger DESDAV IDOC  I have copied LALE output type and changed some setting. I have maintained condition record .
    The settings are : Access Sequence  : 0008, Access to condition, Send with periodically scheduled job, Tran mission medium: Distribution ALE,
    Since the process is as i am sending to third party system not to a specific partner , i have deleted the partners assigned in the standard " SP" and left the field blank in partner function.
    When i create delivery, this output put is appearing twice in Determination analysis,  and not appearing automatically. when i maintain manually, system is asking for partner(SP).
    How do i maintain the third party system as my partner. I have two questions here
    1) Output type is not appearing in Delivery
    2) should i maintain the third party system as sold to party SP or LS(logical system)
    Kindly guide me.
    Note: I have maintained the output type in IDOC - DESDAV and when IDOC triggered manually, IDOC is getting generated.
    Regards
    Fazal

    Hi Santhosh,
    I am able to trigger IDOC now and below are my setting.
    Maintain Partner function LS in output type
    Maintain partner role "LS" in WE20 which i have not maintained.
    Creation of condition record with Dispatch time - Send immediately
    Now i am able to trigger IDOC when Delivery is created. Thank you for help.

Maybe you are looking for