Partner Profiles deleted after TDMS copyback

Recently we had a copyback activity using TDMS 4.0 for ECC system. After the copyback, we noticed that partner profiles has been deleted. One of our pre-steps is to delete the largest tables then delete the client(SCC5) and recreate a shell client. Would like to ask if how we could prevent the deletion of partner profiles during copyback? Or atleast, is there a way we could automate the configuration and return to previous state before the copyback this partner profiles? We're not sure other configurations being deleted during copyback.
Hope for your reply. Thanks in advance...

Hi Philip,
There are many based on your landscape few examples below which i generally use
As Mentioned By Anitha , you can very much do this using TDMS itself , exclude these tables from copying.
#SCC4
T000
#OSS1
EWOSS
#RFCs
RFCDES
RFCDOC
RFCSYSACL
RFCATTRIB
RFCCHECK
RFCDESSECU
RFCTRUST
RFCCMC
RFCGO
#RSA1 Transport conversion
RSLOGSYSMAP
#Transport Number
E070L
#SAP License
SAPLIKEY
#Access Keys
ADIRACCESS
DEVACCESS
#Logon Group
RZLLITAB
#Transport
TMSCROUTE
#BD54
TBDLS
TBDLST

Similar Messages

Partner Profiles overwritten by TDMS-Copy

Hello,
our TDMS-Copy succeeded by overwriting an old client, but copied Partner Profiles (WE20) and Ports (WE21) too, which we didnu2019t want to be changed. Is there a way to save this data?
Regards
p121848

Hi,
The table names are
TBD00 EDIMSG
EDP21
EDP13
EDP12
EDIDD
EDIPHONE
EDP13
EDP21
EDPP1
EDMAT
EDMA
EDADM
EDAYTYPBLOCK
EDAYTYPBLOCKDEF
EDAYTYPBLOCKT
EDAYTYPE
EDAYTYPET
EDBDMSKY
EDCPIC
EDE1T
EDE2T
EDE5T
EDE6T
EDEREGPARCONF
EDEREGPARCONFT
EDEREGPARVAL
EDEREGPODGROUP
EDEREGPODGROUPT
EDEREGPROCPARDIS
EDEREGSCENAGREE
EDEREGSCENARIO
EDEREGSCENARIOT
EDEREGSCENCONTR
EDEREGSCENCONTRT
EDEREGSCENDATEX
EDEREGSCENSERV
EDEREGSCENSERVT
EDEREGSPAGREE
EDEREGSWITCHDIAL
EDEREGSWITCHPROC
EDEREGSWITCHSYST
EDEREG_SERIDENT
EDEREG_SERIDENTT
TBD001
TBD002
TBD00T
TBD03
TBD05
TBD06
TBD20
TBD30
TBD40
TBD41
TBD52
TBD55
TBD56
TBD61
TBD611
TBD61B
TBD62
TBD71
TBD71T
TBD72
TBD73
TBD74
TBDA1
TBDA2
TBDBANKC
TBDBR
TBDBRF
TBDC001
TBDC002
TBDIBAN
TBDLI
TBDLT
TBDMO
TBDMO_DET
TBDRCSTATE
TBDSE
TBDSET
EDEREG_SIDPRO
EDEREG_SIDPROINT
EDEREG_SIDPROT
EDEVCHECK_BACKUP
EDEVGR
EDEXCOMMFORMALE
EDEXCOMMFORMAT
EDEXCOMMFORMATT
EDEXCOMMFORMFTP
EDEXCOMMFORMINTR
EDEXCOMMFORMMAIL
EDEXCOMMFORMPART
EDEXCOMMFORMVERS
EDEXCOMMFORMXML
EDEXCOMMMAILADDR
EDEXDEFSERVPROV
EDEXDEFUI
EDEXDUECONTR
EDEXDUECONTRT
EDEXIDOCSEND
EDEXIDOCSENDT
EDEXPROC
EDEXPROCPAR
EDEXPROCPODGEN
EDEXPROCSPGEN
EDEXPROCT
EDEXPROCUI
EDEXTASK
EDEXTASKASS
EDEXTASKERROR
EDEXTASKIDOC
EDEXTASKREF
EDEXTASKWKFLOW
EDGE
EDICONFIG
EDID3
EDIDD_OLD
EDIDOCINDX
EDILOGADR
EDIPHONE
EDIPO2
EDIPOA
EDIPOACODPAG
EDIPOD
EDIPOF
EDIPOI
EDIPORT
EDIPOX
EDIPOXH
EDIPOXU
EDIQI
EDIQO
EDISCACT
EDISCDOC
EDISCOBJ
EDISCOBJH
EDISCORDSTATE
EDISCORDSTATET
EDISCPOS
EDISCREMOV
EDISCTYPE
EDISCTYPET
EDISCVAR
EDISCVART
EDIVDIM
EDI_MONIT
EDLTYP
EDMMS
EDMS_AT01
EDMS_CONDITION
EDMS_CT01
EDMS_CT01T
EDMS_FILTER
EDMS_LAYOUT
EDMS_LAY_DETAIL
EDMS_PREFS
EDP12
EDP13
EDP21
EDPAR
EDPI1
EDPO1
EDPO3
EDPP1
EDPPV
EDPST
EDPVW
EDRGPODGRASSIG
EDRGSPAGRTYPE
EDRGSPAGRTYPET
EDSC
EDSCH
EDSCHINDEXA
EDSCT
EDSDC
These tables are involved in transaction We20 and Bd64

Roles/Profiles Deleted After Provisioning Bulk Request

Hi there guys,
I just want to ask something. Looking at the SUIM logs, whatever roles that were added to the users were also deleted after several minutes (10-20 minutes approximately) and were registered under the username. Please help identify what triggered the deletion of roles/profiles.
Thanks,
Marlon

Hi,
The parent system is the CUA master. Do the new roles appear in the CUA master for the userID or have they been removed?
If the allocations are present in the CUA master but don't appear in the user in the target system then that shows that there has been a failure somewhere in the chain of idoc being sent from parent, received at target and then processed. The question about the reprocessing is that it is quite common for SAP not to be able to process all the idocs in the target system when a mass change. That is why you should have a job running which re-processes failed idocs. You can also do this manually in BD87.
What is the status of the SCUL logs in the parent system? Are there any that are showing errors? Can you reprocess any of these?
Has this run before and been successful?

Taking Dump of Ports, Partner Profiles etc before Client Deletion

Hi,
Let me firstly tell you about the requirement.
I need to delete a 9TB client using TDMS. And then re-create it again for users. Now the problem is , that the Partner Profiles, Ports will be deleted when I delete the client, which I cannot afford to loose are there are a lot of them.
So, what is the best way to take a dump of the ports and partner profiles and other relevant things. I tried taking the table entries into transports and thought of re-importing them. But I'm not sure what all tables will be there as there are many like :
EDPP1 (general partner profile),
EDP12 (Message Control),
EDP13 (outbound parameters)
EDP21 (inbound parameters)
Partner function exists in table TPAR
Outbound process code exists in table TEDE1
Logical message type exists in table EDMSG
Process code exists in table TEDE2
What is the table for Basic Idoc type
Port is defined in table EDIPORT but where is their assignment to the Logical Name its not in this table.
There would be so many tables that are interdependent and I don't wanna loose even a single one of them.
Please advice the best option, as I am nearing the deadline to delete this client.
Your help is really appreaciated.
Thanks.

Hi
Iam adding some pots to the above which may help you Take screenshots for some important Settings / Configurationsso that you can easily restore them afterclient refresh. For example
u2022     TMS Configuration (STMS)
u2022     Printer Settings (SPAD)
u2022     Logon Group (SMLG)
u2022     OP Mode (RZ04)
u2022     RFC Destinations (SM59)
u2022     WE20 u2013 Partner Profiles
u2022     WE21 u2013 Ports in IDOC Processing
u2022     Client Definitions (SCC4)
u2022     Logical System Names (SCC4 and SM30: V_TBDLS)
u2022     E-Mail Configuration (SCOT)
u2022     SAP House-Keeping Jobs and Customeru2019s Jobs (SM37)
u2022     SSL Configuration (STRUST) if using
u2022     Others
Se09 other request u2022object list Enter R3TR  TABU  RFCDES
Regards

Restoring partner profile after refresh

Hi all,
We are planning to refresh ECC 6.0 Dev & QAS with PRD, how can we restore partner profiles after the refresh is done from PRD->DEV.. or PRD->QAS...
Please suggest .....
Thanks,
Subhash.G

Hi,
Your query is not clear can you explain in detail.
Anil

Retriving partner profiles after upgradation

Hi All,
We are upgrading our system from 4.7 to ECC 6.0. so while upgradation, will the partner profiles of the IDOCS be forwarded to the new version?
If no, how do we get them in the new system. If yes, where they are stored.
I mean, what are the tables they are stored.
I found out that, they wont be carried fwd to the new version. we need to configure them manually. But when they are in thousands it is difficult task right.
Is there any perfect procedure for this task.
Thankyou in advance,
Annapurna.

HI,
My question is , will all the settings done in the partner profiles be retained after upgradation. if yes how? if no, any other way to retain them. because we have idocs in thousands in our project. so this is a big concern.can anyone help me in this regard.

Mail Profiles Being Deleted After Office 2010 to 2013 Deployment

I am deploying Outlook 2013 to user in our environment that has Outlook 2010 presently. Many users have additional attached mailboxes to their Outlook profile. After the deployment the default profile for Outlook in the Mail control panel is removed. Is
there a way to make sure the profile and the user settings do not go away on an upgrade? I'm using a .msp created in the OCT to do this.
Thanks!
B

Did you retain the default settings in OCT for handling Outlook?
By default, mail profile settings and data are migrated/preserved.
http://technet.microsoft.com/en-us/library/ee620554(v=office.15).aspx#BKMK_Choosing
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Firefox cannot find profile, even after deleting and re-installing.

I un-installed firefox when the problem first started, then re-installed it. Still cannot find profile. I went through the Profile Manager Wizard, but that didn't work. It couldn't find the program. I'm not on firefox now since it won't load.

See:
*https://support.mozilla.org/kb/how-run-firefox-when-your-profile-missing-or-inacc
This is usually caused by a problem with the profiles.ini file and the profile marked as Default=1 in this file is no longer present on the hard drive.
*Windows: %AppData%\Mozilla\Firefox\<br>C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Profiles\<profile>\
*Linux: ~/.mozilla/firefox/
*Mac: ~/Library/Application Support/Firefox/
You can use one of these to make Firefox create/use a new default profile:
*Delete the profiles.ini file to force Firefox to create a new default profile
*Use the Profile Manager to create a new profile
*Use "Choose Folder" when you create a new profile to select the location of a lost profile and recover this profile
*http://kb.mozillazine.org/Profile_Manager
*https://support.mozilla.org/kb/Managing+profiles
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Partner Profile vanishes in BW system

Hi All,
We are facing a recurring issue which happens in BW QA system after we refresh is from the BW production system.
After about a week or so after the refresh, the data loads halt in the BW QA system and the BW team gets an error "EDI partner profile not available".
After i checked, i found that the logical system name entry for the EDW QA system (i.e. self system entry) is missing from the table EDPP1 and also from transaction WE20.
I re-created it in WE20 and the entry automatically got created in EDPP1 table.
My question is : I suspect that some job or application program is deleting this entry. We checked the background jobs but no luck.
How do i resolve this error. The client has come up with this question and he wants an answer as to why this
entry is being automatically.
Can you please help?
Regards,
Hari Kishan

Hi,
See the following SAP Notes:
SAP Note 886102 - System Landscape Copy for SAP NetWeaver BW
SAP Note 325470 - Activities after client copy in BW source systems
SAP Note 325525 - Copying and renaming systems in a BW environment
SAP Note 886102 - System Landscape Copy for SAP NetWeaver BW
SAP Note 1333302 - Special procedure for BW system copy
SAP Note 996238 - Dump 'RFC connection error' after BW system copy
Search for PDF in SDN
How Tou2026System Copy in SAP Business Intelligence System Landscapes
Thanks
Reddy

EDI partner profile not found

Hi All,
We are facing a recurring issue which happens in BW QA system after we refresh is from the BW production system.
After about a week or so after the refresh, the data loads halt in the BW QA system and the BW team gets an error "EDI partner profile not available".
After i checked, i found that the logical system name entry for the EDW QA system (i.e. self system entry) is missing from the table EDPP1 and also from transaction WE20.
I re-created it in WE20 and the entry automatically got created in EDPP1 table.
My question is : I suspect that some job or application program is deleting this entry. We checked the background jobs but no luck.
How do i resolve this error. The client has come up with this question and he wants an answer as to why this
entry is being automatically.
Can you please help?
Regards,
Hari Kishan

Hi Ruchit,
Yes. We run BDLS correctly. In fact, ONLY after BDLS jobs complete correctly, then we proceed with the further steps.
However, as per your sugesstion, i went to BD64 but couldn;t find any relevant distribution model.
Can you please elaborate this?
I am still unable to understand how the entry "OBC100" is suddenly disappearing.
One day, it is there and the BW loads run fine.
Suddently, one day, its not there. This has happened on 2 occassions one week after the refresh.
Regards,
Hari Kishan

Regenerating ports for Partner Profiles and Source System (RSA1)

Hello all you SAP gurus,
During a recent backcopy we have an issue after updating Logical System names using BDLS. This has updated the Partner Profiles (WE20) correctly.
BUT
These partner profiles are trying to use ports (WE21) that have been mistakenly deleted. But if we try to recreate the ports we get the message
-"Choose another name! Name range reserved!"-
This specific port is referenced in outbound parameters. Perhaps this is stopping the change?
We could create new ports and hook them up to the partner profiles, but I'm concerned that there might be other locations where the deleted ports are referenced.
Any help would be greatly appreciated!

Hi J,
You can try and disconnect and re-connect the BW System to R/3. That would force the recreation of the Partner Profile.
Take a look at the connection data in table RSBASIDOC, write down the parameters, especially the IDoc Type.
In SE37, run function RSAP_BIW_DISCONNECT_40 and specify parameters for BW System.
Then run RSAP_BIW_CONNECT_40 and specify those parameter again for the BW System.
This will recreate the Partner Profiles. Then check the assigned ports and see if you still have the same issue. Just make sure the RFC connection is set correctly and working in SM59 before doing all this.
In any case, you can create new ports in WE21 and allow the system to assign the numbers automatically and you won't have any issue.
Hope it helps.
Regards,
Luis
Edited by: Luis Sales on Mar 18, 2008 7:28 PM

System copy : how to backup your rfc connections, partner profiles ...

system copy : how to backup your rfc connections, partner profiles (we20) amd ports in IDOC processing (we21) ???
Hi forum,
if you want to copy your production system to your quality assurance system you can export users and later on reimport
it to save work. That's good.
But how about RFC connections, partner profiles and ports in IDOC processing ? Anyway to export and reimport it later on ?
Thank you for your help.
Kind regards
O.Eggert

Hi forum,
in the meantime I found out how to handle this matter. May be this solution is not very elegant, but it works.
As for RFC-Connections there are several tables beginning with rfc. e.g., rfccheck. But 4 of it only differ from one system
to the next. These are rfcdes, rfcdoc, rfcattrib and rfccheck. What I did is the following : I used
brspace -u sapsr3/<password> -f tbexport -t "RFC3"
and quite simply exported these tables. Then I deleted some of the RFC-Connections, both ABAP and TCP/IP. After reimporting
what I exported before all these destinations were availlable again. As for ABAP the password had to be reentered but this
can be avoided, too. Have a look at transaction /nsecstore. The tables behind it are RSECTAB and RSECACTB, rspectively.
Export it after having exported the rfc* tables and reimport it after having reimported the rfc* tables. Very important : enable
the option "consistent export" !!!
It worked this way although there might be better and more elegant solutions.
As for transaction we20 check sap not 182172.
Hope that I could be of profit to this forum.
Kind regards
Olaf Eggert
p.s.
import command : brspace -u sapsr3/<password> -f tbimport.
Them select what you exported before.

Export partner profiles and SM59 Entries before system refresh

Hello All,
How to Export partner profiles and SM59 Entries before system refresh in Netweaver
thanks
Shyam

In SDN search with name RFC export ..you will get so many answers ..
Once again please find the below prcoess for RFC export/import during system refresh.
RFC Export --
go to trans dir.. and then create .ctl file as below
#cd /usr/sap/trans/bin
#vi export_rfc_<sid>_<date>.ctl
#Please create the data file as u201Cexport_<SID>_rfc_<Date>.datu201D
Export
Client=<XXX>
file '/usr/sap/trans/data/export_<SID>_rfc_<Date>.datu2019
delete from rfcattrib
select * from rfcattrib
delete from rfcdes
select * from rfcdes
delete from rfcdoc
select * from rfcdoc
delete from rzllitab
select * from rzllitab
delete from ZTCA_USER_LANG
select * from ZTCA_USER_LANG
delete from rfcsysacl
select * from rfcsysacl
delete from rzllitab
select * from rzllitab
#After that excute export command as below.
R3trans u2013w <export_rfc_<targetSID>_date.log> export_rfc_<targetSID>_date.ctl>
(Format is: R3trans u2013w <logfile> <controlfile>)
Export is finished....
Import
Example:
#cd /usr/sap/trans/bin
#vi import_rfc_pta_11042004.ctl
#Please enter the exported RFC data file in the import control as follows:
import
file '/usr/sap/trans/data/export_pta_rfc_11042004.dat'
(Enter the file name, which is created during the export process)
Regards,
Srinivas Chapa.

Logical system and partner profile configuration

Hi,
I have a SQL server which is defined as a Business system in my landscape. It is sending records to ECC 6.0 which makes it a JDBC to IDOC scenario (inbound IDocs)
First question is do I have to mention a logical system name for the SQL server Business system too ?
Second question is do I create a Logical system in the ECC system (BD54/SALE) for the SQL system or would it be for the client of the ECC system itslef?
Third question is do I maintain partner profile configurations in WE20 for the SQL business system or for the ECC business system?
Thanks in advance.
Cheers,
S

Hi Sam,
> First question is do I have to mention a logical system name for the SQL server Business system too ?
Yes, In SLD You have to specify logical system name of the SQL server business system while creating SQL system.After importing business system into Integration directory,in Adepter-Specific Identifiers you can see logical system name of SQL server business sytem which you defined in SLD.
> Second question is do I create a Logical system in the ECC system (BD54/SALE) for the SQL system or would it be for the client of the ECC system itslef?
Yes,You have to create Logical system in ECC system for SQL system(Logical system name must be with the same name as logical system name you have given in XI SLD in previous question)
> Third question is do I maintain partner profile configurations in WE20 for the SQL business system or for the ECC business system?
In WE20 You have to maintain partner profiles for SQL server Logical system
For example: If SQL server Business system name is SQLDEVBS and logical system name is SQLDEVLS
In ECC you have to create logical system as SQLDEVLS and
Partner profiles for SQLDEVLS in WE20.
Please let me know if you have any issues.
Cheers,
JAG

Inbound delivery partner profile question

Hello,
Based on the help documentation, i have setup a distribution model between ECC and EWM system.
After executing this transaction /n/SPE/OL19, my distribution model is properly generated and I am able to send Idoc from ECC system. However on on EWM system, I am getting an error related to message type DELINF is not found in inbound partner profile.
I searched in WE80 and I do not see this message type in SCM system, can someone kindly suggest if the below mentioned message types used in ECC are right and on the SCM side I have only one message type which is SYNCH.
Following message type in ECC
DELINF
DELORD
/SPE/LIKP.DELIVERYCHANGE
/SPE/LIKP.REQUESTCHANGES
/SPE/LIKP.SAVEREPLICA
BUS2015.DELIVERYCHANGE
BUS2015.SAVEREPLICA
BUS6050.EXECUTE
Following message type in SCM
SYNCH.
Am i missing some setting which is preventing from idoc to be posted in EWM to generate inbound delivery request.
If someone could suggest what are the message types should exist for inbound in EWM side or DELINF needs to be added in EWM system.
Appreciate your suggestions/comments.
Thanks
Bhaskar

No..you can not know it.There is no log.

Partner Profiles deleted after TDMS copyback

Similar Messages

Maybe you are looking for