Partner profit center 855013 does not exist for 8/27/2008

Hi FI Guys,
Iam basically MM guy,i need some help on this FI issue.Could you please help any body please.
Based on the user issue below,i found that thevalid profit center was maintaining in Material master and the G/L account was may not be assigned to G/L account.
please reply step by step.
issue from user:
Iu2019m trying to obsolete some material using MB1A, movement type 951 and the disposal account # 13560002, but after I enter all the information and try to save it I get the following message at the bottom of the screen: u201Cpartner profit center 855013 does not exist for 8/27/2008u201D.
Thanks&Regards,
Babu
09930154536

Dear Babu,
The Profit Center of the selected material has expired validity. Just extend the validity through KE52 and press the button 'extend the validity period' to current year. I think that your problem will be solved.
Trust this helps much!
Cheers,
Ashok SINGH

Similar Messages

  • Profit center 1000/9999 does not exist for 21.10.2008-Message no. KM026

    Hello
    I am trying to create Inquiry through T-code VA12 but when I am assigning Project with it pop up error
    Profit center 1000/9999 does not exist for 21.10.2008
    Message no. KM026
    Diagnosis
    The desired profit center 9999 is not in the master data table for the specified date.
    Procedure
    Check your entry.
    Note: The profit center is usually derived from the original account assignment object (cost center, order, and so on) or other information (such as the material number).
    If necessary, create the desired profit center for the appropriate time frame.
    Initially in this system dummy profit center activated but I now I donu2019t want dummy profit center so I changed master data date but now I am getting this error.
    From were this (9999) dummy profit center is picking.
    If some body has Idea let me know

    Dear,
    Go to tcode KCH5N select ur profit center on the right side u will find the validity period button click it to check. . If the posting is taking place within the validity period no issue else extend the validity period..
    To check the period closing t.code is MMRV
    To close the period - MMPV
    If the problem still exists, then please go to KE53, give the respective profit center in which the material is assigned and enter.
    There you can see the validity period for that profit center and I presume the validity period is ended before the  creation date. Check that.
    Regards,
    R.Brahmankar

  • Profit Center 990612 does not exist in Company Code XYZ

    Dear Friends,
    During the time of posting through t.code F-02 than system is showing the below error :-
    Message no Z1008
    The Profit Center entered does not exist in this company code.
    Enter the correct profiot center which belongs to this company code.
    To search for profit center by comapny code, use matchcode type
    'Z' - Profit Center by company code and name.
    Please advice.
    Thanks & Regards,
    Pankaj

    Hi Pankaj
    This message is a Z message, which means your own creation
    Go to OB28 and check where have you written the Validation step to check this
    Also, check if the PC exists in that comp code or not
    br, Ajay M

  • Profit cener 9999 does not exist for 31.01.2010

    I am getting this error when i am doing confirmation.. that Profit center XXXX/9999 does not exist for 31.01.2010.
    If i check in KE52 the profit center 9999 is not found.neither in KE53..
    If that profit center is not there in the system,then why is that error message says that.. Where is the prof center 9999 linkd in production ord confirmation..
    Please help me out
    For information: I am doing the confirmation in plant aaaa,whereas we also have a plant yyyy extended now.. Is there anyway to find whether this profit center is linked with the second plant.. If yes how can we find that out
    Edited by: karthick PP on Feb 9, 2010 4:32 AM

    hi,
    This profit center might be coming from cost center which is defined in work center of that operation.Other reason might be work center specific cost center doesn't have profit center assignment so system is tying to post this amount to dummy profit center.Please check dummy profit center has been defined for that period?
    Please let me know.
    regards,
    ashok

  • Partner (vendor no.) does not exist for partner function LF

    I am trying to trigger outbound i doc from PO messages, and im getting this message, also im just getting this for UB type order and not regular PO NB.
    Partner 970023 does not exist for partner function LF
    Message no. VN006
    Diagnosis
    Partner does not exist for the partner function selected for this
    transaction.
    Procedure
    Check your input.

    Hi Ankit,
       Please check the Partner Tab in Header and see whether partners have been determined for the PO. If that is not determined, then check the customization settings in NAST.
      You can also refer to SAP Notes 117537, 407600, 69492 and 459350.
    Hope this helps.
    With Best Regards
    Srinivas

  • Profit center 1000/00000208A0 does not exist for 13.06.2008

    Hi All,
    My user encounter this problem when try to release to accounting for a billing via VF02
    The actual profit center is 208A03 but the msg show is 208A0
    Where should I check for this problem ?
    This is a new profit center.
    Thanks in advance.
    Janice

    Hi,
    Could you please tell us the message number and message class.
    Thanks and regards,
    Priyajit

  • Profit center US01/    TP3870 does not exist for 03/23/2011

    Hello Team,
    Our Profit Center is 6045TP3870 but when SD guy is releasing SD document for Account at VF02, he is getting below error,
    "Profit center US01/        TP3870 does not exist for 03/23/2011"
    I don't understand why the system has taken part of Profit Center only. Profit center 6045TP3870 is well exist for 03/23/2011.
    I have checked the Material Master when the profit Center is correctly maintained.
    Can any one help to resolve this issue.
    Spandana

    Hey Spandana,
    Make sure the profit center is active, and if it is, check for relevant validations and/or substitutions with user exits.

  • Profit center 1000/1400000023 does not exist for 21.07.2009

    Hi Gurus,
    When i am posting billing document i am gettting error message "Profit center 1000/1400000023 does not exist for 21.07.2009"
    Pls help me how to solve this problem.
    Thanks & regards
    Srinivas.N

    Dear Srinivas,
    The validity date of Profit center is finished.
    Go to KE53 and check the Dates for the Pofit center whether its valid or not.
    If its not valid, Go to KE52, Change the date, actiivate the Profit center. ( i guess it will be done by FI Consultant) .
    PS: Please search the forum before posting the question, you will get lots of handful materials...and dont post same question in multiple forums.
    Thanks,
    Raja

  • Profit center 1000/DUMMY does not exist for 20.06.2011 KM026 - Asset postin

    Hi Friends,
    While posting asset opening balance (transaction type 100), we are getting the error 'Profit center 1000/DUMMY does not exist for 20.06.2011' for one company code. (not for all company codes. It is giving error to only one company code).
    We don't maintain this dummy profit center as we have doc splitting activated for all the compay codes. So, master data for dummy profit center is not there in the system for all the company codes. But all the company codes are working properly except one company code. It is giving dummy profit center error.
    Please could any one advice?
    Thanks in advance.

    Hi krishna Kumar,
    I guess you are in ECC 6.0 version or above 5.0 version.
    Up to 4.7 the profit center accounting was a part of Controlling. But from ECC 6.0 ( Enterprise Centrel Component) the profit center accounting is part of FI.
    Regarding the error mentioned by you, you have activated profit center accounting from CO module, and you have assigned the number ranges for Profit Center Accounting, this means for the documents with the profit center account assingment system will generate 1 FI Document and 1 profit center document.
    So wherever system is not able to find the profit center it will try to post the document for dummy profit center.
    As per my experience with ECC 6.0 we need not activate and assign the number ranges for profit center documents.
    Except OKE5 settings no other settings are required for profit center.
    The above all is if you dont want to use classic profit center accounting. So first please check your requirement and take the decision.
    thanks & regards,
    shashi kanth.

  • Cost Center does not exist for a particular period - Solution

    We have encountered an error in the subject,
    COST CENTER does not exist for a particular period
    Solution:
    1) Either extend the Posting period for the invoicing  date
    2) Or enter the Cost Center as PO number in Sales Order
    Please do add your comments if there are different ways to solve this error

    The Post contains a solution

  • Actual activity price does not exist for cost center / activity type

    Hi,
    We are trying to upload the time sheet related data(number of hours an employee workred on a project) ect from Non SAP to SAP.
    We have used a customized program and have loaded the data from se38.
    All this HR data will be saved in CAT2
    Later we transfer the time related data into SAP FI/CO using CAT7.
    +When  tested  with a couple of employees time sheets, they got uploaded in SE38 proerly and when transfered it through CAT7 it was properly taking the hour*rate is cost and was reflecting in the respective cost element.
    For a few time sheets in SE38 we were getting an error saying that the cost center(100501)/ activity type(EAT001) does not exist for 2010.
    Hence we have taken, FY 2010, the cost centes and activity types in KP26 and have given the planned Activity as 1. No planned cost in KP06.
    We have run the price calculation forr the FY 2010.
    Then we were able to uplaod the time sheets, but when we tried to transfer the data through CAT7, it throws an error saying no activity price exist for cost center 100501/ activity type EAT001. If I ignore the warning an proceed, no amount is being calculated.
    When uploaded employee time sheets before, all the cost were getting claculated and were entering into  the respective cost elements, but now no amounts are being calculated and it is taking Zero.
    When checked the previous years data i.e, 2009 all amounts are fine, in KSII I can see the activity quantity filled with some numbers in 2009, where from are they comming? I have checked KBk6 nothing was mentioned.
    PLease assit
    Regards,
    shilpa

    Hi
    I never used CAT* though, but the error means that you need to maintain a activity price in KBK6 (Actual price)
    Regards
    Ajay M

  • Partner does not exist for partner function LF

    Hi gurus
    while trying to print the output of a Purchase order thru ME22N, after selecting Print output, Output type as Purchase Order (NEU), and a partner, the system isues a arning message "Patner xxxx does not exist for partner function LF".
    Can someone pls explain what does this imply?
    Regards
    Deepak

    Hi
    xxxx is just a string to show you the Warning Message that appeared. Actually it was a Partner that was missing for the Patner Function LF.
    Regards
    Deepak Prasanna S

  • PO/ Invoice created for supplier does not exist for particular company code

    Hi Gurus,
    We have a case where PO created w.r.t supplier X does not exist for any company code A. Also Invoice is generated.
    As per my analysis:
    1. Purchasing organization is assigned to the particular plant and Plant does assigned to company code. This purchasing organization does not assigned to any company code and kind of centrally allowed to any company code based on above link.
    2. Supplier X does exist for the purchasing organization. And in Partner function-For PI (Invoice presented) partner function, it is defined for another supplier Y. This Y supplier does exist for company code A and might be the reason, it is allowing creating PO and Invoice.
    Please correct me, if I am wrong or If there will be any other reason for the same. Just for your information, there is no Info record exist for this PO as it is created for service without any material number.
    Thanks for your response.
    Best regards,
    Karun Kumar

    You can create vendor only with reference to purchase organization and withoout company code.
    for this vendor, you can create PO and MIGO and system will allow but when you try to post the invoice system will prompt you to enter different invoice party. if you dont enter different invoice party, system will throw an error message "vendor is not defined in XXXX.
    So in your case, your analysis is correct.

  • The system is auto population partner profit center even when not provided

    Hi experts,
    While posting FB01,The system is auto population partner profit center even when not provided in the entry.Requested to you could you please assist us as soon as possbile.
    Thanks & Best regards
    Sreenivas

    Will you please let me know where you get this field partner profit center. In my screen for FB01, I do not see any such field.
    Sangram

  • Table does not exist for the sys user

    Hey Everyone,
    I am having a strange problem with 10G 10.2. I keep getting the table does not exist for all the tables when I am logged in as sys. It is strange because I can query the same tables being logged in as a regular user say 'scott'. I can't figure out what the problem is since it could not be privileges because the user is sys. Is there something I am missing here. Any advice would be welcome.
    Thanks,
    Sarang

    Yeah i am using the query....
    SELECT * FORM SCOTT.EMP
    It is a little wierd. I did a full database restore yesterday night. I dont know if that has anything to do with this. Will have to take a look at the logs.

Maybe you are looking for

  • Some reports do not work after upgraded to Crystal Report 2008

    Hi All, After upgraed from Crystal Report XI to Crystal Report 2008, some reports work fine. others not. All of the not-working reports have the same problem: Database connection failed. And I can even not be able to create a brand new report. The pr

  • Extended Notifications: Message not sent

    Hi Folks I had configured the extended notifications in the development system and it was working perfactly. Then I transported the customizing request for the above config to Test system. I have scheduled the job for SCOT and SWN_SELSEN. SWN_SELSEN

  • Can't figure out how to increase tempo curve for a track/region

    What I'm trying to accomplish: Using the heartbeat.aif (Audio) that comes with Logic Pro, I'd like to have the affect of increasing the speed of the heartbeat over a defined period of time. I've tried the "time machine" to change the BPM but it opera

  • Is it possible to edit a reader-enabled form?

    I have Adobe XI and recently created an interactive fill-able form. I saved it as reader enabled. The challenge is that when I made the form, I copied some of the text boxes instead of inserting new ones each time. Those text boxes are now linked in

  • If I restore iPhone, there won't be any way to get photos back?

    I was trying to update my phone to the 6 update, but then it said there was an error. Now my phone won't let me get inside of it at all. It's making me restore the whole phone (I haven't clicked the "yes, restore phone" button yet because I'm trying