Partner role- Goods supplier name not coming in MIGO

Hi,
While configuring partner roles i did all settings ...in PO i am giving my goods supplier name in partner tab ...now when i am doing MIGO that supplier name is not coming in the screen..
What can be the reason?
Utsav

Hi,
Re:
What else to check? Are you using partner role GS for your goods supplier? Has the GS vendor master the name of the goods supplier in Name 1 field?
Yes i am using partner role in goods suppler....
Yes the GS vendor master the name of the goods supplier in Name 1 field..
I created 1 venodr Main Vendor V1 through XK01..
I created another vendor as Goods Supplier V2 through XK01..
Now i went in XK02, in Vendor V1 under partner roles, i mentioned Goods Supplier as V2...
Now i am creating PO against main Vendor V1...Under partner tab Goods supplier V2 is coming from Vendor master..That is correct...
Now when i am doing GRN for above PO, there i am not getting my Goods supplier name...
Utsav

Similar Messages

Partner functions - Goods supplier at PO Level

Hi Friends,
Is it possible to maintain a single PO multipule goods suppliers (GS) like as
my process i order a marketing dept of Vendor 1. Vendor1 having goods supplieres in different locations.
in same PO Mat1, Mat2 .
mat1 supplied from mumbai, MAT 2 supplied from chennai. in single PO how can i maintain multipule GS.
if any possible to partner function. and need to maintain two Suppling Location address also.
if possible through vendor - sub range how it will maintain in SAP pls expalain step by step.
thanks.

Hi Jürgen L.
Thanks for ur reply, but i want to know this is i maintained at contract ME31K level, why should not given po level.
if i maintain contracts for Same vendor Different Goods suppliers. how it will effect, where its hit this contract Goods suppliers.
pls explain me.

Offset account name not coming in G/L printout

Hi,
We have SBO 2005B PL25
in the G/L printout the offset acount code is coming through systm variable 74 but the acount name is not coming even after using system variable 415 please help with a workaround as we urgntly need the printed cash books
regards
Edited by: Philip Eller on Jul 7, 2008 9:25 AM

Pradipta Dasgupta,
You can print offset account name using
system variable no.415 using subsidary account option and
then select template
'General Ledger by posting date(system)'.
I checked it offset account name appears in print preview.
Jeyakanthan

Supplier Name not appearing

Hi
I have created a new organisation and when i try to create an invoice in AP i am not able to see all the suppliers name in the list. but when i make payments i am able to see all the suppliers in the supplier name list.

You need to go to logon to AP linked to the new org you created and then go to Suppliers master and create a site for this org. Supplier Sites are Org specific and that's why you are not able to see them in the new org.
Regards
Rakesh

Educationau200Bl SCessCVD (J1CV) is not coming in MIGO from MIRO

Hi,
This is a scenario of Import Purchasing of Excisable Material
I did Invoice Verification (MIRO) for Custom and CVD and while doing Goods Receipt (MIGO), I referred the Invoice Document No. as well.
The value of CVD (JCV1), ECess CVD (JECV) and Add. Customs duty (JADC) is being captured in MIGO from the Invoice document but the value of Educational SCessCVD (J1CV) is not flowing from the Invoice document.
The CIN settings regarding Excise default seems to be properly maintained for the rest three condition types above mentioned but since the condition type J1CV is hard coded in SAP so this couldn't be maintained in Excise Default.
Please provide the expert opinion to overcome this issue.
Thanks in advance
Rajesh Praveen

Hi
J1CV SEcess you have to maintain in AT1
Check once again Chapter ID Tax indicator, Vendor Tax indicator, Cenvat determination for particular materials all are in J1ID, and check your condition type is in classify condition types
[Re: Ecess and SCEss values are not coming automatically in MIGO for import;
Regards
Kailas ugale

Excise tab not coming at MIGO

hi all
pleasde tell me why excise tab is not coming at the time of MIGO trasaction
what are the probable reasons
regards,
sujit

Dear Sujit,
Please make sure whether you have maintained the Excise Default Settings for Tax Procedure whatever you are using
take the reference of standard one that will be better and maintained it in SPRO-IMG
The Path is
SPRO>Logistic-General> Tax on Good Movements>India>Basic Settings------>>> Maintained Excise Defaults
after that Check all these given below
-In J1ID the material chapter Id combination is maintained.
---The Cenvat determination is maintained.
---The Vendor details and vendor status is maintained.
This will get solved your Problem
Thanks

57F4 Chalan is not coming in MIGO Header

Dear Friend,
When I am doing MIGO for a job work PO, In the Header data, Excise invoice tab page, the option for 57F4 chalan is not coming!
The material does not have a master record and and account assignment category is K. The material group is J001 ( Job Work Uploaded Materials).
Can you pls give me a clue to get it in MIGO?
Thanks
Chandra

Dear Sujoy
This material does not have a master record. Thus it does not have any material code. TThus I cant not maintain J1ID.
But then what can be done ?
Thanks
Chandra

Total Excise Duty not coming in MIGO

Hi All,
For a PO in MIGO am getting Total Excise tab in header level(in Excise invoice tab) but the same is not coming in item details.Please let me know what is wrong?
Thanks,
Rakesh.

Hai,
In std sap u will not get the total excise in either header r item, in ur client it might have delveloped.

Variable name not coming in the alert message

Hi All,
Reference with blog <u>/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
My problem is alert message not showing the variables value.Alert will generated properly but variable like "SXMS_ERROR_CAT, SXMS_ERROR_CODE" not showing in the alert messages.
My scenario is if sender or receiver adapter has wrong server name then the alert will triggered.
Regards,
Samarjit

Hi,
SXMS_ERROR_CAT and SXMS_ERROR_CODE are for Integration Engine alerts and will not be displayed for adapter Engine Alerts.
For the adapter eingine alerts , you need to use, <b>
SXMS_TO_ADAPTER_TYPE
SXMS_TO_ADAPTER_ERRTXT</b>
Regards
Bhavesh

Goods movement tab not coming in production order

Dear PP Gurus,
I have created a production order and done the partial confirmation of this production order.
I am not able to see the Goods movement tab in the display.
When i go to T CODE CO14 and enter the order number .
I am not able to see the goods movement tab .
Please help. I think i have misd something in config.
Best regards

Dear Aadi,
At the time of Booking, You are not entered the good movement tab, thats why i you r not able tyo see the goods movement in the diaplay of confrimation.
If U want Material is to be posted at the time of confimation
1 ) Then make a proper setting as backflush ( maintain the back flush In material master MRP 2 View, or in work center or in routing ( component allocation screen
2) to amake a Auto GR for header material- assign the control key with auto GR on the final operation in the routing ,
3 ) Click the goods movemnt tab at the time of confrmation and change the quantity as per the actual consumption and Post
4 IF u post the good movemnt at the time of confimation , you can see in the diapaly mode otherwise U cannot see the goods movement Tab
regards,
Sundaresan
Edited by: Sundaresan . E. V on Mar 15, 2010 10:30 AM

Burned DVD Name not coming up in player...

When I burn a dvd with DVDSP I name the disc as well as nameing it ont he burnpage... but when I play it back in a dvd player the disc comes up Unknown dvd. Any thoughts? Usually they are dvd-9's burned onto tdk dual layer discs.

I have never used DVDSP to burn discs, certainly the disc name appears when I use Toast-but the manual says this:
''each DVD disc you create is automatically given the same name as the
project’s file, entered when you saved it. The disc’s name can be seen by the viewer when the finished DVD is played on a computer
To name the disc in the Disc Inspector:
1 Do one of the following:
• Select the disc’s name (next to the disc icon) in the Outline tab.
• Click an empty area in the Graphical tab.
The Disc Inspector appears.
Note: Choose View > Show Inspector if the Inspector is not visible.
2 Enter the new name for the disc in the Name field at the top of the Disc Inspector, then press Return.''

Selection screen with Parameter - field name not coming when made mandatory

Hi Experts,
I have added a parameter in my selection screen which has other select options as well.
I used below code in wd_initi to add parameter
    create data LR_LIFNR type LIFNR.
    WD_THIS->M_HANDLER->ADD_PARAMETER_FIELD(
    I_ID         = 'LIFNR'
    I_VALUE      = LR_LIFNR
    I_OBLIGATORY = ABAP_TRUE
    I_READ_ONLY = L_READ_ONLY ).
I have a submit button in the selection screen, so when ever the value is empty in parameter for LIFNR, system throws an error *Enter selection in Field "" * but error message is unable to take the name of the parameter?
It is expected to give as Enter selection in Field "Vendor"
This throwing of error message is working fine for another select-options for PO which is also mandatory.
What could be the error?
Any clue is highly appreciated.
Regards,
Ajay

Hi,
WDDOINIT the code is:
lt_range_table = wd_this->m_handle->create_range_table(
                                                i_typename = 'ZRM_T_CV_END_DATE1' ).
wd_this->m_handle->add_selection_field(
                      i_id = 'ZRM_T_CV_END_DATE1'
                      i_description = 'Project End Date (MM.YYYY)'
                      it_result = lt_range_table
                      i_read_only = read_only ).
on submit the code is :
rt_prj_end = wd_this->m_handle->get_range_table_of_sel_field(
                                    i_id = 'ZRM_T_CV_END_DATE1' ).
ASSIGN rt_prj_end->* TO <fs_prj_end>.
1.is the data element the same in both the methods u mentioned.i,e on WDDOINIT AND ON ACTION OF SUBMIT.
please check it once.
2.2does the data element LIFNR has field label assosciated with it.(check in domain).
3.check adding description to the field shown as below.
wd_this->m_handle->add_selection_field(
                      i_id = 'ZRM_T_CV_END_DATE1'
                      i_description = 'Project End Date (MM.YYYY)'
                    it_result = lt_range_table
                      i_read_only = read_only )
Try checking these 3 cases.
Priya

Defaults value for JMOP , JAOP & JSOP is not coming in MIGO

Hello Experts,
If I maintianed condition type JMOP, JAOP, JSOP in SPRO - Maintain Exise Default. Then value comes default in MIGO at the time GR then Part 1, Part 2 also updated But Tax is not calculated in MIRO. I used TAXINN procedure.
Regards,
Dipu

Dear
Make sure that you have to check following few points.
1) All condition records for JMOP,JEC1,JSEP and their respective set off JMX1, JEX1, JHX1 are correctly maintained.
2) Then this tax code should be maintained to company code in SPRO- Logistics General- Tax on goods Movements- Basic settings- Determination Of Excise Duty- Condition Based Excise Determination- Assign Tax code to Company code
3) Then in that same path SPRO- Logistics General- Tax on goods Movements- Basic settings- Determination Of Excise Duty- Condition Based Excise Determination- Classify condition types . Assign all condition types to TAXINN .This is important from the point of view of TAXINN .
For TAXINN maintaining excise default carries no significance except CVD condition types.
4) One more thing in excise PART II entry is everything fine . Else check SPRO- Logistics General- Tax on goods Movements- Account determination - Specify Excise Accounts per excise transactions . There you check all credit , debit conditions against GRPO excise tranaction types.
Revert back if issue is still not solved ..
Abhijit Das

Assessable value and the Excise details are NOT coming in MIGO

We are facing problem that assessable value and the Excise details are NOT getting populated automatically when doing MIGO in IN03 plant.We have a STO from a DC to plant. We created the outbound delivery and then captured the excise invoice using J1IJ.In migo we give the reference of this excise invoice in the excise invoice tab then the values calculated should flow in MIGO.This is not happening and user have to manually calculate the tax and put in the system.
I have followed the following steps
1. Create STO PO ME21N
2. Create outbound delivery using VL10B
3. Do the PGI using VL02N
4. Capture the exice invoice using J1IJ in depot
5. Do MIGO and give the reference of the excise invoice created

Hi,
In STO, your supplying plant is your Vendor for the receiving plant. Hence, you have to maintain the supplying plant as vendor also. Pl. check in table J1ID that the vendor data is maintained for the supplying plant.
Regards,
Prashant

Excise tab is not coming in MIGO

Dear All ,
pl help that as user is trying to do G.R wrt inb. delv , let me brief out user had made a qty contract with an import vendor itis having two line items , now an Rel order ( material ) is created wrt this qty contract., now as user is trying to do GR wrt inbound delv so for first line item excise tab is displaying & the ex. tab is not displying for second line item , even i had checked in J1ID for mat & chap i.d combination it is maint. here , pl guide what else to check.
rgds,
sap11

The process is as below;
1. ME21N - Create Import PO
2. MIRO - Customs Invoice
3. J1IEX - Capture Bill of Entry
4. MIGO - GR w.r.t. Import PO
5. J1IEX - Post Bill of Entry
6. MIRO - Import Vendor Invoice
7. MIRO - Clearing Agent Invoice
Please check the following
Follow the exactly same process as suggested above.
J1ID - Maintain Excise Indicator as 1 and rest all Excise Details as "NA" for Import Vendor (Also check for Material & Chapter ID Combination, CENVAT Determination, Excise Tax Rates, etc...)
ME21N - Import PO should have a Zero % Tax Code.
Maintain Number range in J1I9 for objects.
Regards

Partner role- Goods supplier name not coming in MIGO

Similar Messages

Maybe you are looking for