Partner's Busienss Area

Dear All,
I need post manual document (transaction: FB01) with value partners/ business area in the balance items.
In my document I use these items:
- GL Account:   13000000 - Banks
- GL Account:   20100000 - Loans recievables.
I fill a value of partner's business area in the document.  But when I save this document, value for Partner,s Business Area is missing in the document.
I use New G/L.
The document is allowvalue for traning partner.
Thank in advance for your help.
Regards,
anka

Hi,
PAth:
Financial Accounting (New), choose Financial Accounting Global Settings (New) ® Ledgers ® Fields ® Display Scenarios for General Ledger Accounting.
Active Scenarious (Partner's Busienss Area ) 
Business area -  RBUSA
Trading partner business area - SBUSA
Regards,
Viswa

Similar Messages

  • Partner Segment - CO Area

    Dear Experts,
    Currently we are implementing Segment reporting (NewGL) where we have a requirements to picture complete balance sheet at segment level and segment consolidation as well. For, segment consolidation we need partner information in order to eliminate. If we use different controlling areas, is it possible to get the partner information as we have activated the CO-FI real time integration for cross companies and cross segments.
    Somebody please suggest me regarding
    Thanks in advance
    Regards,
    Ram

    Hi,
    PAth:
    Financial Accounting (New), choose Financial Accounting Global Settings (New) ® Ledgers ® Fields ® Display Scenarios for General Ledger Accounting.
    Active Scenarious (Partner's Busienss Area ) 
    Business area -  RBUSA
    Trading partner business area - SBUSA
    Regards,
    Viswa

  • Vendor closing balances busienss area wise

    Dear Guru's
    Please suggest me,  i am executed this report S_ALR_87012082 vendor balance with local currency,  i  have given business area in dynemic selection,   here my problem is - if i am given business area or if i am not given business area also this report is showing same balances.   It should show less or more balance .  please suggest me from where can i get exact vendor closing balace busienss area wise.
    Regards
    Chandu

    HI Chandu,
    you given the Report S_ALR_87012082 there is no Business Area, only avaliable Vendor Master and Company Code in the Dynamic Selections,
    why can't  u use the FBL1N, In the FBL1N dynamic Selections you will get vendor Master, Company Code and Document
    In the Document you Select the Business Area filed then Double click the field than select equals to your Business Area.....
    May be all the Posting is Made only one Business Area, try two different business Areas....

  • Create new  Business Partner in Loan Area

    Hi friends,
    I am facing the problem following:
    I can not create a new Business Partner (main Loan Partner) in Loan area.
    From Create new contract in Loan area, I create a new Business Partner (Organization) -> Result: Display screen is Create new contract
    I don't know why? I check in customizing but I can't find which step I missed.
    Please help me fix error
    Thanks and Best regards
    Ms. Minh

    Hi friends,
    it's done if create a Business Partner from T.code BP then assign to loan contract.
    But I want to fix error why I can't search and create a Business Partner from Loan Contract
    Thanks and Best regards
    Ms.Minh

  • Assigned view BTPARTNER/Partner in view area Root could not be loaded

    Hi All,
    After enhancing the BTPARTNER/Partner view in the BTPARTNER component getting below dump.
    Assigned view BTPARTNER/Partner in view area Root could not be loaded.
    Assigned view BTPARTNER/Partner in view area Root could not be loaded
    The occurrence of the exception is closely related to the occurrence of
    a previous exception "CX_BSP_WD_INV_VA_ASSIGNMENT", which was raised in the
    program "CL_BSP_WD_VIEW_CONTROLLER=====CP",
    specifically in line 116 of the (include) program
    "CL_BSP_WD_VIEW_CONTROLLER=====CM001".
    Please help me how to solve this issue.
    Thanks,
    P.Anitha

    Hi Anitha,
    Can you try activating all services under the node default_host -> sap -> bc -> bsp -> sap in SICF?
    Regards,
    Aditya

  • Painter doesn't work with Trading Partner's Business Area COSP-PARGB

    Hello,
    i valorized field PARGB through FI substitution (Tcode GGB1) and it works fine.
    PARGB is valorized in BSEG, COEP and COSP for CO totals records for reporting.
    In GR22 i activated PARGB in Characteristics screen for Library 6O1 (internal orders).
    I created a report copying standard report 6O01-001 and i put in General Data Selection field PARGB.
    The selection screen doesn't work!
    The field appears and F1 functionality calls COSP-PARGB and it's correct.
    I tried to use fix values rather than variables (standard or custom), but the extraction doesn't work.
    The system doesn't filter by Trading partner's Business Area.
    Please, does anybody know something in matter?
    Thanks,
    Regards
    Enrico

    Hi Sanjit,
    I tried to find what you said, but no success.
    I made it work in other site, but in my own it doesn't work :S
    I'm adding to receive mails in [email protected]
    and here goes the site www.meanwhileeverywhere.com
    I'll be glad if you help find this missing thing.
    Thx!
    Johnny Macedo
    2014-03-13 14:34 GMT-03:00 Sanjit_Das <[email protected]>:
        Re: Muse contact form doesn't work properly with external email
    provider  created by Sanjit_Das<http://forums.adobe.com/people/Sanjit_Das>in *Help
    with using Adobe Muse CC* - View the full discussion<http://forums.adobe.com/message/6206807#6206807

  • Partner determination functions are not determine in sales order

    Dear Sap Gurus,
    I have made a new partner function (P2) and have been configure it in partner determination procedure, although i hv made new customer master for the same account group. All th partner function are showing in the customer master data but these are not determine in sales order, one error is coming...this partner procedure is not defined.......kindly give me advide how to resolve this problem.
    Regards
    Parul Deshwal

    Hi
    Have you assigned the Partner determination procedure to your sales document type?
    Also have you assigned the Partner function to your Partner determination procedure.
    Also do the same to the sales order item partner determination
    regards
    Prashanth

  • Trading partner on Business Area Clearing Account

    Hi,
    I have configured business area wise financial statements for my client. But when doing cross-company code postings, the BA is not getting transferred to the company code clearing accounts. Is there a way to get it to transfer automatically ?
    In the mean time, I am using Balance sheet adjustments to resolve this, but the trading partner on the original document line item is not getting copied to the business area clearing account. Is there a way to get the trading partner to get transferred to the BA clearing account?
    Also, by looking at the line items of the BA clearing account, is there a way I can determine the original account that was adjustment?
    Any recommendations of how I can handle this are greatly appreciated.
    Thanks in advance,
    ALAS

    hai,
    Goto T.Code Se38 and give SAPF180K it will display any error. then you correct the error and rerun again F.5d & f.5e. It will work. 
    Problem because of Reconciliation acount. It means all the reconciliation account need to be mapped in OBXM with business area clearing account.
    And also Cash Gl account needs cash clearing account. because you will not able to enter business area in Cash account. (corresponding entry will have the business area)
    Try this. If you have any problem mail me back.
    govind.

  • Business Partner creation - Sales Area Data retrieves blank divisions

    During business partner creation, the sales area data assignment block will retrieve a list of all relevant sales organizations, distribution channels, and divisions that are replicated from ECC. This is working fine. However, it also adds to this list with the sales organizations, distribution channels, and blank divisions. Blank divisions do not exist in either ECC or CRM. It appears to be using the dummy division settings, but I have attempted to configure with the indicator "CRM Header Div. Active" as both active and inactive, to no effect. The only time I have been able to condense this list into a single line has been when I actually activated dummy divisions -- to which CRM would now retrieve only sales organizations, distribution channels, and blank divisions. This is not an ideal solution either.
    How do I get the system to remove the blank divisions from being displayed? It is very confusing to the users, not to mention polluting the screen.
    Example (both are being displayed, I only want the one with an actual value to be displayed):
    Sales Org = 1000, Dist Chan = 10, Division = blank
    Sales Org = 1000, Dist Chan = 10, Division = 10

    any insight woudl be much appreciated. thanks.

  • About Business Partner Marketing, Sales Area Data tables

    Hi,
    I want the table names where Business Partner sales area data and Marketing Attributes are stored.
    Thanks in advance.
    Regards,
    Dhanraj.

    Hi Natarajan,
    Thanks for your help.
    But There is no data inside this CRM_MKTPL_ATTR table.
    I want the Sales Organisation,Distribution Channel, Division data and Marketing Attributes of Every Business Partner.
    I found table CRMM_BUT_FRG0080 contains data, but when I created a new Business Partner and maintain the Sales Area Data, the saved data does not reflect in the CRMM_BUT_FRG0080 table.
    Regards,
    Dhanraj.

  • BPs with Business Partner (Gnrl) role are not replicating to ECC

    Dear all,
    I want to replicate BPs with General Business Partner role from CRM to ECC, all sold to pary (Role) customers are replicating to ECC perfectly.
    Kindly help. your help will be greately appreciated.
    Best regards
    Shravanthi R

    Hi Srinivas,
    Could you please eloberate that, how and where can I maintain filter settings for BP roles.
    I have reached R3AC1>BUPA_MAIN>FILTER SETTINGS-->SELECTED SOURCE SYSTEM AS 'OLTP'.
    Don't know how to proceed further, Please help.
    Your help will be appreciated.
    Best regards
    Sharavanthi R

  • How , When and What is the significance of Business Partner's Sales Area Data?

    Dear All,
    What is the Sales Area data of busines partner , What is the significance of the same?
    When it gets modified or extended?
    How to maintain its configuration? How maintain its data!!
    Hence i want to understand almost all about sales Area data of business partner.
    Regards,
    Dhruvin
    Moderated: Please use the search before posting.
    Message was edited by: Andrei Vishnevsky

    Hello Dhruvin,
    I think you shall have a look on the current help about this issue as it is a Complex ssue meaning "extense" and also one of the basic Points on the customizing and deployment of a CRM System:
    Organizational Management in SAP CRM - SAP Library
    Basically the Sales Area Data identifies your BP in your Sales Organization.
    You define your sales organization so its fits your business requirements and real structure. f
    Having this information properly defined helps to link data between SD and CRM so you can have for example: - The proper price for a customer when creating and Oportunity/ Sales Order.
                  - To restrict the access of the information of an employee.
    Hope these hints help..
    Regards            

  • Business Partner - CRM Sales Area Data disabled

    Hi Experts,
    Facing a small problem in Business Partner screen.
    I have created a Sold-to-Party role and when i go to the <b>Sales Area Data</b>
    data set, i should be able to Choose Sales Area for determining the Sales Org and Distribution Channel. But the Button <b>Choose Sales Area</b>
    is not enabled. Kindly help me out in Enabling this button so that i can choose Sales Area and determine the Sales Org and Distribution Channel.
    Thanks
    Shiva

    Hi,
    1. Go to transaction sm30
    2. Open T77OMATTR in display mode.
    3. Select SALE and go to Attributes/Scenarios.
    4. Now go to the detail of attributes IS_SA_GRP, IS_SA_OFF and
    IS_SA_ORG.
    There you will see that Flag is not checked for 'Simulated'. For
    Enhanced model it should be checked. Check the checkbox for all the
    three attributes and then run the report
    HRBCI_ATTRIBUTES_BUFFER_UPDATE.
    Smita.

  • Issue with Trading Partner Identification - Files are not picked

    Hi,
    As per user guide and also the following note
    http://www.oracle.com/technology/products/integration/b2b/pdf/B2B_TN_013_EDI_VAN_Identify_TP_based_on_
    ISA_GS_ID.pdf
    I did uncomment the following line
    #oracle.tip.adapter.b2b.edi.identifyFromTP = Interchange | Group | Exchange
    from tip.properties
    But when I put a file 810 EDI file "test_canon810_11i.dat" for B2B pickup B2B errors with
    "Trading partner agreement not found for the given input values: From party[NAME] "test", To party[NAME] "IKON", Business action name "810_inbound_p"; also verify agreement effectiveToDate"
    But if I just rename the file to "CANON_810_11i.dat" B2B successfully processes the file.
    I have setup trading partners IKON and CANON with appropriate edi interchange id but not sure why B2B is erroring in previous case and in the latter case why is it trying to identify the trading partner by filename (even though the tip.properties has been updated as mentioned earlier)
    Let me know if you have any pointers in fixing above
    Thanks
    Sachin Sutar

    Hi Sachin,
    If you want to use the Interchange Sender/Receiver ID for identification, please set
    oracle.tip.adapter.b2b.edi.identifyFromTP=Interchange in the tip.properties. Uncomment the #oracle.tip.adapter.b2b.edi.identifyFromTP = Interchange | Group | Exchange would not work.
    As a result, the B2B Server defaults to identifying the Trading Partner base on the file name. You can see from the b2b.log that the From party[NAME] = test or CANON. That's because we use the first portion of the file name as the TP name.
    Hope this helps,
    Eng

  • Busienss Area in Documenty splitting

    Hi All
    I have document splitting concept with Profit centre, Segment, and Business Area. and required setting has been made as per the requirement. all three fields are mandatory and applied for zero balnce clearing account. after posting accounting document, in entry view i could able to see all three fields but while executing in General Ledger veiw i could not be able to see business area field apart from business area i can see profit centre and segement firelds with zero balance clearing account. i mean to say in BSEG table data is flowing but FAGLFLEXA table business area field is not flowing. wat could be the reason for that. is any setting missing?
    Thanks and Advance
    Sahil

    HI,
    check if the FIN_GSBER sceanrio is acitvated in the ledger definition.
    best regards, Christian

Maybe you are looking for