Partner Self-registration in Oracle B2B 10g

Hi B2B team,
Wanted to confirm from you if there is any provision for Partner self-registration in Oracle B2B 10g. We are on the latest patch. I am not aware of this functionality but wanted to get this confirmed from the product team.
Also, we will require a server restart when a new TP comes onboard in Oracle B2B 10g isnt it? Is my understanding correct or is there something we can do to overcome this?
Regards
Kavitha

Kavitha,
Drop a mail to B2B product dev team/PM to know more on this part. As far as I know there is no such facility in 10g. Yes, bounce may be required in case of certificate changes involved.
Regards,
Anuj

Similar Messages

How to get the file name from Oracle B2B 10g

Hi My requirement is I am getting a CSV file from Trading partner, I am using oracle 10g b2b to translate the data.
In my BPEL 10g I am using AQ adapter to get the message from IP_IN_QUEUE.
Now I want to get the file name Eg: SampleFile.dat of the CSV file in my BPEL process.
I tried using the b2b.filename property in the receive activity and it is not getting the file name.
<sequence name="main">
    <receive name="Receive_Note" partnerLink="GetB2BNote"
             portType="ns1:Dequeue_ptt" operation="Dequeue"
             variable="Receive_Note_Dequeue_InputVariable"
             createInstance="yes">
             <bpelx:property name="b2b.fileName" variable="WriteFileName"/>
    </receive>
</sequence>
Can you help me to get the file name from Oracle b2b 10g ?
Thanks,
b2b user

Hi My requirement is I am getting a CSV file from Trading partner, I am using oracle 10g b2b to translate the data.
In my BPEL 10g I am using AQ adapter to get the message from IP_IN_QUEUE.
Now I want to get the file name Eg: SampleFile.dat of the CSV file in my BPEL process.
I tried using the b2b.filename property in the receive activity and it is not getting the file name.
<sequence name="main">
    <receive name="Receive_Note" partnerLink="GetB2BNote"
             portType="ns1:Dequeue_ptt" operation="Dequeue"
             variable="Receive_Note_Dequeue_InputVariable"
             createInstance="yes">
             <bpelx:property name="b2b.fileName" variable="WriteFileName"/>
    </receive>
</sequence>
Can you help me to get the file name from Oracle b2b 10g ?
Thanks,
b2b user

Where is partnerDefinedPIPPayloadBindingId value set in Oracle b2b 10g

Hi I am using custom documents to be exchanged over Rosettanet(RSIF). The TP expects the following tag in the service header of the Rosettanet Wire message which is being constructed by Oracle B2B :
<partnerDefinedPIPPayloadBindingId>
<ProprietaryReferenceIdentifier>PIDX</ProprietaryReferenceIdentifier>
</partnerDefinedPIPPayloadBindingId>
This is a mandate parameter that is to be sent if documents are used on RSIF.
I am not able to find a way to set this up anywhere on the Oracle B2B screens. Can someone pls. help.

If I am not wrong then Oracle B2B does not set this header. PIDX implementation guide (http://www.pidx.org/standards/upload/PIDX%20XML%20Implementation%20Guideline%202002-02-14%20V1.0.doc) mentions about "partnerDefinedPIPPayloadBindingId" implementation as -
This data element is used to identify a proprietary binding ID that permits the RosettaNet based parts of a multipart message to bind to non-RosettaNet parts. This element is populated to cover where the trading partners wish to exchange messages based on proprietary document formats (non-RosettaNet Schema) using a RosettaNet PIP.
PIDX requirements support the use of the RNIF Framework but will not use existing RosettaNet PIPs. Given that this is the case, * Trading Partners will typically not populate this data element. *From above reference it does not seem to be mandatory parameter. Still if your requirements bound you to use this header, contact Oracle Support to get help on this.
Regards,
Anuj

Oracle B2B 10g Remote Trading Partner Configuration

Hi All,
How to create a Business Action in operational capabilities of remote trading partner for the exchange of custom xml document betwenn trading partners.
Also please suggest any document where we can follow the steps for creating trading partner for custom xml exchange.
Regards,
Jagadesh.

You may like to refer -
http://www.b2bgurus.com/2007/12/how-to-handle-hosttrading-partner-with.html
Multiple "HOST-partner" configuration possible?
Regards,
Anuj

EDI X12 Version 4060 setup issue in Oracle B2B 10g

Hi All,
We are currently encountering some issues in doing Inbound Trading Partner Set-ups to accept Inbound 210 Documents using EDI X12 Version 4060.
We created an ecs file(only from ST to SE) excluding envelop, doing all the reqd set up in B2B ,keeping "use Default Document definition" box checked (for 210), deploying agreement and all ; we are getting below error:
+Element ISA12 is a coded list element. Code '00406' is not allowed. Segment ISA is defined in the guideline at position 010.{br}{br}This error was detected at:{br}{tab}Segment Count: 1{br}{tab}Element Position: 12{br}{tab}Characters: 84 through 89+
any help regarding this welcomed.
Regards,
Ravi

Hi Anuj,
Yes this problem is coming in 10.1.2 b2b version..steps we have done are mentioned below :
1. create a new business action -->created a new dcoument protocol with revision 4060
Now we define the document protocol parameters (here we mentioned ISA & GS qualifier
& values for the host trading partner) & we leave the interchange ecs file & group ecs file values blank here.
here we leave these parameter values : Interchange Control Version Number & Version/Release/Industry Identifier Code as Null or blank.
Next we define Document Type: 210 with revision as 4060 & then attach a new document definition with this
(here we specify the transaction set ecs & xsd files ( this just has the ST-SE transaction set meaning the ecs
doesn't have the ISA & GS envelopes here in it( while creating ecs in spec builder we are not Inserting the envelopes in it))
2. TP definition/setup :
Here we define the trading partner -- here we define a new operational capability -- here we select the
business action created in step1.
Now here we uncheck the option (Use defualt Document Protocol Paramters and mention the interchange & group qualifier & values for this trading partner.
here we mention Interchange Control Version Number : 00406
Version/Release/Industry Identifier Code : 004060
Here also we don't mention anything for interchange ecs file & group ecs file values, we leave these blank/null.
Also we leave the checkbox for : Use Default document definition as Yes.
Now could you please review & advise what exactly needs to be done.
regards

How to download payload from b2b_instancemessage view in Oracle b2b 10g

I am not able to extract message payload from B2B_INSTANCEMESSAGE VIEW.
when i execute this query:
select payload from b2b_instancemessage where documenttype like '%rsConfirmIncid%';
the output I get is "BLOB"
I need the complete payload. can somebody please help me?

We had the requirements to display the Payload in a BAM Monitoring dashboard. Since it was not part of the typical B2B-BAM Monitoring process, and even though technically we can get it from the B2B Message view, there are some BAM feature limitations due to which we had to build a simple ADF page to display the payload and link it to the BAM report. To the end user it is not relevent if we built is using BAM/ADF as it is seamless. Hope this will help someone else who is looking for a similar solution.
Uday.

B2B Account Self Registration

Hi Experts,
I have a requirement to provide b2b account self registration on the B2B log on screen. I knew that this is not a default functionality provided by SAP.
I would like to know if there is any work around for this. Can I use Channel Partner registration with B2B?
Please let me know if you have configured/customized any similar solution.
Many Thanks,
Srinivasu

Hi,
Guest registration is covered with base licenses.
Here is some material that will bring you up to speed:
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5712/ps11637/ps11195/qa_c67-658591.html
Base:
Capabilities: Basic network access and guest access
Network deployment support: Wired, wireless, and VPN
License prerequisite: None
Perpetual license
Licenses are available for 100, 250, 500, 1000, 1500, 2500, 3500, 5000, 10,000, 25,000, 50,000, and 100,000 endpoints
Tarik Admani
*Please rate helpful posts*

Self-Registration in OIM 10g: how to install, customize and use of SPML

Hello. Can someone point me to any documentation (Oracle or other) on self-registration in OIM 10g. Like doc on how to install it and customize it. Also a doc on how to set up self-registration on a separate server and talk to OIM server using SPML.

Refer doc below:
http://download.oracle.com/docs/cd/E14049_01/doc.9101/e14044.pdf
regards,
GP

Oracle SOA B2B 10g Console Issue

Hi All,
I'm trying to create a Business Action in Oracle SOA B2B 10g Console but getting below error, please suggest.
Error
An error occured when creating the business action
Erroe -: AIP-11052: Writing following objects: Document Type failed due to following constraint violation:
DOCUMENTTPE. CAN NOT UPDATE UNVERSIONABLE OBJECT IN A VALIDATED CONFIGURATION
Using Custom Document over Generic exchange protocol to create a business action.
Note: Tried by bouncing server once, even though getting same error.
Regards,
Jagadesh.

Jagadesh,
Oracle 10g version is very old release of Oracle B2B. In the 11g or 12c release, it has been enhanced with many features, optimised, integrated with SOA and it is very easy to use.
Hence it is highly advised to install the later version of 11g or 12c.
This link might help you - https://blogs.oracle.com/oracleb2bgurus/entry/what_it_takes_to_migrate_an_ex
Incase if there is any issue in production environment of 10g, you might not get the support if you file any SR.
Regards,

Oracle B2B Payload not delivered to partner through Generic HTTP channel

Hi,
We have a situation where the B2B payload is not delivered to the partner. Below are the steps we followed to set up the agreement and channels.
1. Created a document definition under "Custom" protocol and uploaded the XSD into the document definition.
2. Created the remote partner.
3. Created a generic HTTP channel in the profile tab. Given a HTTPS url and also specified the keystore location.
4. Created the agreement and specified the above HTTP channel in the to-partner channel's section.
5. Posted the message to Oracle B2B through SOAP UI.
6. Message has reached B2B and the agreement is invoked and state of the message is MSG_COMPLETE.
7. In the wire message, I could see the state as complete and packed message is having the payload.
8. Even in the diagnostic log, I could see the http response code as 200.
" [IPT_HttpSendResponseStatusCode] HTTP Response status code: 200"
But, the remote partner is not receiving this payload. I am not sure where the issue? Remote partner is getting an error message as below
Doc Number =%error/ErrorInfo/documentNumber%
Document Type =%error/ErrorInfo/documentType%
Sender =Unknown
Receiver =Unknown
Correlationid =%error/ErrorInfo/correlationid%
ErrorMessage =[XSL.0003.9002] Transformation: No XML source provided
ServiceName =pub.xslt.Transformations:transformSerialXML
Please suggest any clue on how to debug this.
Thanks,
-Sriharish.

We got this fixed by setting the "additional transport headers" in the channel.
Additional Transport Headers: SOAPAction="notify"#Content-type=text/xml
Thanks,
-Sriharish.

1Z0-043 Oracle DB 10g: Admin II Self Study CD has many errors

Many slides have errors in 1Z0-043 Oracle DB 10g: Admin II Self Study CD. I keep trying to report these to Oracle Education and I am getting the runaround. Does anybody know if in these cases you should answer it wrong like the Self Study CD tells you it should be, or when they grade the test do they really know the correct answer. The most blatant case of this is a slide in the Post Assessment of "ASM and Materialized Views", "Materialized Views", "Distributed Data Technologies". The slide in the Post Assessment has the description "Match the different distributed data technologies with their descriptions". Out of 4 pairs to match, all 4 are wrong compared to what it says in the course material just before it! Please HELP! This is just one example of many errors on this CD. Do you have to answer these questions wrong when you take the test?

Hi,
Please note that the Certification Team does not create the self-study CDs. I am sorry you are having difficulty with these CDs. I can assure you that you should NOT intentionally answer questions incorrectly on the test. The certification tests are not taken directly from training materials.
Regards,
Certification Forum Moderator

Oracle Self Registration

We are looking for some information regarding Self-Registration, Your replies are greatly appreciated.
1. How can we modify (add/delete) attributes in the Self-Registration module.
2. How can we access the attributes of this User repository( tables) Is there any out-of-the-box (customizable) functionality to search these tables.
Thanks in Advance.
Mohan

Hi,
I found an article on Metalink that says to create the self-registration workflow using Quickstart, and then copy a link/URL that appears after saving the workflow.
I'm still wondering how to figure out what that URL is after-the-fact, i.e., if I forgot to copy the URL after creating the workflow initially??
Does anyone know?
Thanks,
Jim

Self-registration and the WWSSO_API_USER_ADMIN package

I am using the wwsso_api_user_admin package to build a self registration JPDK portlet for my client to be run on the Portal Welcome page and I have a few questions. Just so you know, I am using Oracle 8.1.7.1.1 and Oracle Portal 3.0.9.8.2 all running on Win 2000.
1. The package spec ssoumgt.pks is not clear as to which warning codes and exceptions can be returned or raise from create_user. All the other procedures in that package have explicit comments about which warnings and/or exceptions can possibly occur, but create_user does not. It makes sense that it would return OK_SO_FAR and DUP_USERNAME, but are there any other return codes and/or exceptions?
2. The package spec ssoumgt.pks also states that the create_user procedure "will raise an exception if a dupicate user is created." During my unit testing, I only recieve a DUP_USERNAME warning when I try to register a username twice. Is there a similar exception, and if so, what causes it to be raised? The phrase in the spec also makes it sound like the duplicate username is created anyway before the exception or warning is returned. I suspect that the package has change, but someone forgot to update the comments in the package spec. Can you clarify this?
3. In Portal, under Login Server Administration, I have set the Login Server configuration to disallow passwords to be the same as the user name and required passwords to contain at least one numeric digit and one character. However, these restrictions are not enforced by the create_user procedure in the wwsso_api_user_admin package. I can even supply a NULL password and the account is created in the login server. Is this a bug or am I not getting something?
Thanks,
Dennis

are you working with 9iAS portals?
portal_sso (or portal30_sso) schema was used to be in the 9iAS system. in the 10g family, it was replaced by orasso which resides in the infrastructure db.
AMN

Problem migrating ear from Oracle AS 10g to 11g.

Hi
I need to deploy an ear file in Oracle AS 11g. The ear has war in it.
The ear file has uix pages and the supporting files (EOs and VOs).
Using Oracle AS 10g:
Here, i used to create a OC4J container and deploy the ear in this container.
Using Oracle AS 11g:
As there is no OC4J container support here, I have to deploy the ear in the
weblogic server. I am facing problems doing so.
In weblogic console,
1) I have created a server and got it running.
2) Went to 'Deployments' page and clicked on 'Install'.
3) Entered the path for the ear file and pressed 'Next'
I am getting the following error:
X - Error Unable to access the selected application.
X - Message icon - Error Exception in AppMerge flows' progression
X - Message icon - Error Exception in AppMerge flows' progression
X - Message icon - Error Bean already exists: "weblogic.j2ee.descriptor.ParamValueBeanImpl@bdc14d68(/[uix] /InitParams[oracle.cabo.ui.UIExtensions])"
X - Message icon - Error Bean already exists: "weblogic.j2ee.descriptor.ParamValueBeanImpl@bdc14d68(/[uix]/InitParams[oracle.cabo.ui.UIExtensions])"
Can someone tell me if how this can be done or point me to an appropriate tutorial.
It will be of great help.
Thanks
Kamal.

Hi
I could resolve the previous issue.
But now i am facing the following error while trying to 'run' the application.
Jan 9, 2010 4:35:55 PM oracle.mds.internal.lcm.logging.MDSLCMLogger info
INFO: Application ID : OSNUIxProjec
Jan 9, 2010 4:35:55 PM oracle.mds.internal.lcm.logging.MDSLCMLogger info
INFO: "Metadata Services: Metadata archive (MAR) not found."
Jan 9, 2010 4:35:55 PM JpsApplicationLifecycleListener Migrate Application Credential Store
WARNING: Overwriting credentials is allowed in application credential store migration with Weblogic server running in Development Mode and system property 'jps.app.credential.overwrite.allowed' set to true
Jan 9, 2010 4:36:22 PM oracle.mds.internal.lcm.logging.MDSLCMLogger info
INFO: Application ID : wsm-pm
Jan 9, 2010 4:36:22 PM oracle.mds.internal.lcm.logging.MDSLCMLogger info
INFO: "Metadata Services: Metadata archive (MAR) not found."
[2010-01-09 16:36:34] [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [ERROR] [LogWriter] getInstance() failed
[2010-01-09 16:36:34] [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [ERROR] [LogWriter] null
[2010-01-09 16:36:34] [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [ERROR] [LogWriter] getInstance() failed
Any idea why this is happening?
Thanks
Kamal

User Self Registration in OIM 11.1.1.3

Hi all,
Iam trying to register user using self registration process,the request is sent to admin(xelsysadm), i tried to accept request in admin(xelsysadm account) but the request status is showing as "Request Failed".And showing error as
IAM-2050014:An error occurred while initiating approvals for request oracle.iam.platform.workflowservice.exception.IAMWorkflowException: Tasklist mapping failed for workflowdefinition:
Error:default/DefaultRequestApproval!1.0 due to unable to process due to null. The corresponding error message is {1}.
Can any help to solve the issue.
Thanks & Regards,
Satish
Edited by: satish on Sep 8, 2010 3:58 PM
Edited by: satish on Sep 11, 2010 7:16 PM

Did you set the organization, before approving the Task. The Approver needs to specify an OIM organization in which to create a user.
Regards,
Sanjay Sadarangani

Partner Self-registration in Oracle B2B 10g

Similar Messages

Maybe you are looking for