Partner should not be deleted

Hi All,
In Ibase partner functions, it is displaying all partner. my requirement is ,it should not be deleted, when it is in display mode.
is there any configuration or BADI to control this one?
kathir.

Hi,
That is the standard behaviour of SAP Workitem. IF you want to keep teh workitem in his inbox then you should make use of Dynamic Parallel processing with a multiline container element which is availabel in the MIscellaneous tab,
All teh agents for whom you are sending the mail populate all teh user in a multiline container element and then assign this element in this field , once you do this a internal <CONATINER ELEMENT NAME>_LINE element will be created by the system, you assign this element in the Agents using EXPRESSION under control tab.
THis will dynamycally create parallel branches based on the number of agents populated in the mulitline container element. In this way you can make sure that the agents are having the workitem for each.
Regards
Pavan

Similar Messages

Attachments in PRs/POs should not be deleted

Dear All
Attachments in PRs and POs should not be deleted. Is there any control for this?
Thank you

Hi Jack,
SAP Note 49127 - cost center account assignments in asset accounting.
I couldnot find information on deletion of attachments in Purchasing documents PR/PO.
Can you guide me please
Regards,
Mavs

When I delete emails in gmail, the emails should not get deleted in thunderbird. Please advise. Thank you.

Thank you for taking out time to help. I have thousands of emails in gmail which I keep on deleting. I have configured thunderbird for this email account and it is sunchronized and upto date. If I delete the emails in gmail now, I do not want them to get disappeared from thunderbird. Basically, whatever the emails I delete in gmail and it's trash should not be deleted from thunderbird. Please advise on what steps should be taken. Thanking you once again.

'''If you have a IMAP mail account:'''
You are remotely viewing the folders and emails on the server.
You subscribe to see folders. but this only downloads emailsheaders and downloads the emails upon selection to a temp cache for viewig. They are not stored in your profile.
If you also synchronise then a copy of the server folder is downloaded and stored in the Thunderbird Profile, but synchronised folders keep synchronising so that the server and TB folders are the same.
IT does not matter whether you delete emails via Thunderbird or webmail, you are deleting from the same folders. So, if you delete off server and then discover it has been deleted from Thunderbird, everything is working perfectly.

Material once issued thru' PM order,Should not be Deleted From The PM Order

Dear all,
IN PM ORDER, ONCE MATERIAL IS ISSUED THROUGH IT, SYSTEM ALLOWS TO DELETE MATERIAL. THIS SHOULD NOT
HAPPEN AS IT WOULD LEAD TO WRONG COST CALCULATION.
Order Status : gmps,cnf
can anybody give me solution to restrict the deletion of component in PM Order.
From
Vishal

Hi,
You cannot control this through Auth.
You can prevent this by assigning the message type for message number 750(cn) to "E= Error" through the config for message control.
Regards
Narasimhan

Workitem should not be deleted

Hi experts,
In my workflow scenario, I have to send mail to multiple agents, that working fine. My problem is, if any of the agents executes the workitem from his sap inbox, the mail get deleted from the inbox of all the agents, which should not happen. Only the agent who execute the workitem, mail should be deleted from his inbox only.
Can any one help me on this please??

Hi,
That is the standard behaviour of SAP Workitem. IF you want to keep teh workitem in his inbox then you should make use of Dynamic Parallel processing with a multiline container element which is availabel in the MIscellaneous tab,
All teh agents for whom you are sending the mail populate all teh user in a multiline container element and then assign this element in this field , once you do this a internal <CONATINER ELEMENT NAME>_LINE element will be created by the system, you assign this element in the Agents using EXPRESSION under control tab.
THis will dynamycally create parallel branches based on the number of agents populated in the mulitline container element. In this way you can make sure that the agents are having the workitem for each.
Regards
Pavan

PR(released) should not be deleted in md51 planning mode 3

Hi all,
We are facing a problem in MRP run taken through transaction code MD51. This Problem (as explained below) will occur when MRP control parameter for Planning Mode will be set to u20183u2019 (Delete and recreate planning data).
During normal course, if MRP control parameter for Planning mode is set to u20183u2019, system deletes all open PR & Planned orders & creates new PR & new planned orders.
But in our business scenario, where we have release strategy for MRP generated PR, even these released PR get deleted. This results in re-analysis & releasing of MRP generated PR which itself is a tedious & time consuming task.
We are looking for a solution where PR will not get deleted during MRP.
Thanks
Sukumar

You may check to your release indicator for in SPRO-Materials ManagementPurchasingPurchase RequisitionRelease ProcedureProcedure with ClassificationSet Up Procedure with Classification> Release indicator for the final release --> Indicator: Fixed for requirements planning (is checked or not, try to check it) and retry the scenario.

Release PR Should not get deleted in md51,planning mode 3

Hi all,
We are facing a problem in MRP run taken through transaction code MD51. This Problem (as explained below) will occur when MRP control parameter for Planning Mode will be set to u20183u2019 (Delete and recreate planning data).
During normal course, if MRP control parameter for Planning mode is set to u20183u2019, system deletes all open PR & Planned orders & creates new PR & new planned orders.
But in our business scenario, where we have release strategy for MRP generated PR, even these released PR get deleted. This results in re-analysis & releasing of MRP generated PR which itself is a tedious & time consuming task.
We are looking for a solution where PR will not get deleted during MRP.
Thanks
Sukumar
Edited by: skumar kalame on Nov 10, 2008 1:59 PM

Hi,
The planing time fence is maintained in MRP-1 view of the material in workdays. You can also have this defined in the MRP group. But the value in material master takes precedence over MRP group.
Use - It is a kind of safety fence which is used to protect any automatic changes to take place for firm order proposals during MRP run.
Depends on - Firming indicator needs to be maintained for the MRP type. This can be set in customizing for the MRP Type. This basically specifies how you want to firm the order proposals. Please note there are 5 types of firming
The SAP help for firming type reads as below:
firming type 0
The system does not firm procurement proposals automatically.
firming type 1
Procurement proposals that move into the planning time fence are firmed automatically, as soon as their date lies at least one day before the end date of the planning time fence. The date of new procurement proposals that are created in the planning time fence is displaced to the end of the planning time fence. These new procurement proposals are not firmed.
firming type 2
Procurement proposals that move into the planning time fence are firmed automatically, as soon as their date lies at least one day before the end date of the planning time fence. The system does not create any new procurement proposals within the planning time fence; that means, the system does not balance the shortage situation in the planning time fence.
firming type 3
Procurement proposals that move into the planning time fence are not firmed automatically by the system. All procurement proposals that are necessary for requirements coverage are displaced to the end of the planning time fence.
firming type 4
Procurement proposals that move into the planning time fence are not firmed automatically by the system. The system does not create any new procurement proposals within the planning time fence; that means, the system does not balance the shortage situation in the planning time fence.
If helpful award points
Regards,
Vivek

Sap inbox, shared folders docs should not be deleted except by author

Dear All
I have put some User trainig manuals in SAP inbox Shared folders and I kept the attribute as 'changeable by author'. But, Users can able to delete these files or documents. Is it possible to make that deletion is also only allowed by Author?
Also, is it possible to track who deleted these documents?
Thanks
Edited by: srini v on Aug 6, 2009 12:54 PM

hi,
1. yes u can control delet original through defining Authorization objects for respective user. refer DMS authrization objects
u can use this object and set activities. like create only, delet only. etc in 'C_DRAW_TCS ' This object controls which users can process which document info records, based on a combination of activity, document type, and status.
2. Also check tc --STAT, ask bassis regarding monitoring of user activities.
Benakaraj
??P

NOT ALLOWING DELETION TRIGGER!!

Dear all, I am having a Master and a Detail table of Customers.. All I would like to do is to create a trigger that should not allow deletion of a Customer in the Master table while there is a record in the Detail table concerning this particular customer..
Any ideas?

Hi Kiriakos Kiriakatos
I would advice you to solve this matter with a foreign key, see example below:
[[email protected]] CREATE TABLE MASTER(K NUMBER PRIMARY KEY);
Table created.
[[email protected]] CREATE TABLE DETAIL(K NUMBER);
Table created.
[[email protected]] ALTER TABLE DETAIL ADD CONSTRAINT FK_MASTER FOREIGN KEY (K) REFERENCES MASTER(K);
Table altered.
[[email protected]] INSERT INTO MASTER VALUES (1);
1 row created.
[[email protected]] INSERT INTO DETAIL VALUES (1);
1 row created.
[[email protected]] DELETE FROM MASTER;
DELETE FROM MASTER
ERROR at line 1:
ORA-02292: integrity constraint (SCOTT.FK_MASTER) violated - child record found
Hope thsio helps!
Remi http://askremi.ora-0000.com

In ME22N deleted line item should not be Re-activate

Dear Sap Guru's
For Purchase order in T.code ME22N deleted line item should not be reactivate.
If i create some line items in this t.code and i delete these items then ince again someone wants to views these they he should not be able to view the deleted line items.
plz give me reply as soon as possible.Urgent

hi
version management
SPRO > Material Management > Purchasing -> Version Management .
After activating version management you can see the Version tab in ME53N near to source of supply tab in PR.
http://help.sap.com/saphelp_srm30/helpdata/en/46/882fdd8bfc1743bd5ef8b532f94402/content.htm
SAP Enterprise Buyer provides you with version management for purchasing documents. As a first step, you can display versions of purchase orders and contracts.
The system creates a version in the background if you, as a purchaser, carry out one of the following actions:
· You change a posted purchase order
· You order a posted purchase order again
· You change a contract that has already been released
· You release an already released contract again
In contrast to the change documents that retain a change history, a version displays the status of a document at a specific point in time.
Version management provides a check for you as a purchaser, for example, if you wish to display a purchase order in the form in which you transferred it to the vendor on day X. A version provides clarity, for example, in negotiations on a contract.
Features
You can use versions as follows:
· Display
· Compare and list differences in tabular form. The comparison result has separate areas that can be displayed:
Header data (including organizational data, tax and payment data; partner data and documents)
Item data (including taxes and limits if they exist; partner data, documents; account assignment and conditions)
· Archive, if it relates to transaction data (you can archive versions of purchase orders, but not contract versions)
You cannot change or output versions. This is only possible for the active document.
Also, visit the following thread:
regards
kunal

The shipment should not allow to save without partner forwarrding agent.

The CR (forwarding agent) partner is set as Mandatory in the configuration for partner procedure TR, but you can save a shipment without this partner function. We are only using Shipment type Z003 and the TR procedure is assigned, and the CR partner is set as mandatory but the system is not requiring it. Why isn't the Mandatory flag working in create mode? If there is a CR on a shipment already, it will not let you delete it, but it will let you create a shipment and save without the CR partner. See Shipmentxxx in DX1, it was created and saved without any partners on the partner tab.
The shipment should not allow to save without partner forwarrding agent.

Hi,
Check config for 'Set Up Partner Determination for Shipments'.
I believe the Partner function for Forwarding agent is FA and here you are talking about CR.
Also make sure you Partner determination procedure is reflecting in your Shipment type.
Regards,
Amit

System should not allow to delete PO line Item after GR/IR

Hi,
I am working on a SAP Retail Implementation project.
Currently the system is allowing us to delete the PO line items after doing GR or IR against that PO line item. But the clients requirement is that the system should not allow to delete PO line item after doing GR/IR.
We are using Account Assignment Category-N, Item Category-S.
Please let me know if you have the solution for this requirement.
Thanks in advance
Thanks & Regards,
Suresh

Hi,
Standard SAP will not allowed the PO to be deleted once it was GR done. The controlled is on the attributes of message to set as "E"
Message no. 06115
But if invoiced takes place, the is the point that PO can be deleted.
You have to do have a Enhancement using MM06E005, insert you logic here to check PO history tables like EKBE, then check if invoice " Q" (BEWTP) exist, the PO cannot be deleted once the user delete the PO line and SAVE it. Ask you developer to help you on the following coding.
Use MM06E005 and EXIT_SAPMM06E_012
IF SY-TCODE = 'ME22N'.
IF sy-ucomm = 'MESAVE' OR SY-UCOMM = 'YES'..
LOOP AT TEKPO.
IF TEKPO-LOEKZ = 'L'.
SELECT SINGLE BELNR FROM EKBE INTO BELNR1 WHERE EBELN = TEKPO-EBELN AND EBELP = TEKPO-EBELP AND BEWTP = 'E'.
IF SY-SUBRC = 0.
SELECT SINGLE BELNR FROM EKBE INTO BELNR2 WHERE EBELN = TEKPO-EBELN AND EBELP = TEKPO-EBELP AND BEWTP = 'Q'.
IF SY-SUBRC = 0.
Regards,

My hard drive crashed on my Mac Book Pro and I just had it replaced yesterday. After restoring my data, Safari will not open. The error message I continue to receive is "Safari quit unexpectedly" Should I just delete the application and download a new?

My hard drive crashed on my Mac Book Pro and I just had it replaced yesterday. After restoring my data, Safari will not open. The error message I continue to receive is "Safari quit unexpectedly" Should I just delete the application and download a new one?

http://swcdn.apple.com/content/downloads/37/23/041-5058/lr5tynbldi18zcrqo8a8uq88 rnjushqliu/Safari6Lion.pkg
Here you go.....

PR deleted line should not appear in PO creation

Hi Folks!!!
We create Purchase Orders with reference to Purchase Requisition. In case of Multiple Line Item in PR, there are some line items marked for deletion.
While creating PO, the line items marked for deletion in PR should not be adopted (appeared) in PO. What settings should I make to do it.
Best regards

Hi,
In ME21N, you receive message 06 050 - "Purchase requisition & item & already deleted". This message can be changed to an error message via IMG transaction OME0. The checks for the messages can only take place,
after adopting all positions (as well deleted ones).
To prevent this, please check to see if one of the following will help:
1) Select the checkbox 'Open only' on the selection screen for the overview. In this case, the deleted items will not appear on
the overview and therefore they cannot be adopted. Or,
2) If you do not want to have the purchase requisitions with deleted items selected in ME21N, you can use the field "deletion indicator" in the variant for your purchase requisitions, by excluding it in   the dynamic selections.
P.S. If you have maintained message 06 050 as E (error), the user will not able to save the PO (he can only hold it)
Regards,
Mauro

An app continues to say "installing" when nothing is happening. It has been several hours now. It's only a book so should not take this long. I have tried deleting it and that did not work.

An app continues to say "installing" when nothing is happening. It has been several hours now. It's only a book so should not take this long. I have tried deleting it and that did not work.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Partner should not be deleted

Similar Messages

Maybe you are looking for