Partrial Delivery Indicator in Purchase Order

Dear Sir,
I have been told that in Purchase Order Creation (ME21n / Me22n) we can mark the Partial Delivery Indicator at Item Level under the "DELIVERY Tab" .
On Clicking the Delivery Tab , I am not finding any field for Partial Delivery Indicator .
Kindly help me , as what steps need to be followed so that this Field start appearing .
With Thanks and Rgds
Sonia

Dear Mr Vivek
We want to mention in the Purchase Order , whether Partial Delivery is acceptable or Not .
As per following sap help literature , it is possible to mention such requirement.
http://help.sap.com/saphelp_crm40/helpdata/en/dd/5607f4545a11d1a7020000e829fd11/content.htm
Rgds
Sonia

Similar Messages

"Delivery Completed" Indicator in Purchase Order

Hi,
While doing GR, we want to check the "Delivery Completed" on the Goods Receipt Screen if we are expecting no future receipt against the Purchase Order.
On SDN & SAP Note, I got to know that we canu2019t tick the "Delivery Completed" Check Box while doing Goods Receipt.
We have implemented the Release Strategy on the Purchase Order. To tick the "Delivery Completed" Check Box, we need to cancel the Release Strategy.
Is there any other way (T Codes) to achieve the same?
Regards,

Even you flag Delivery Completed" Indicator in Purchase Order, system still allows GRN for open Qty.
Use MEMASSPO trxn & Put Deletion indicator for the PO Line Item. So that you can not do GRN for the open Qty of PO line item.
Check
mass setting of delivery completed indicator

BDC/BAPI for set delivery cmlition indicator in purchase order @ item level

Hi Expert,
could you please suggest me bapi to set/reset delivery completion indicator in purchase order at item level for t-code "ME22n"?
Thanks and regard,
Santosh Gupta

Use BAPI_PO_CHANGE to set the delivery completed indicator.
Refer to table section in the BAPI Interface
POITEM LIKE BAPIMEPOITEM
POITEMX LIKE BAPIMEPOITEMX
Set Field POITEM-NO_MORE_GR = 'X' & Set field POITEMX-NO_MORE_GR = 'X'

NEED VL02N VL09 USER-EXIT FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER

I NEED VL02N VL09 USER-EXITS FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER POSITIONS.
F.X: IF POST QUANTITY 10, BUT PURCHASE ORDER POSITION QUANTITY 30, I NEED AT ANY CASE TO SET DELIVERY COMPLETE INDICATOR FOR RELEVANT OUTBOUND DELIVERY AN P. ORDER POSITIONS.
THANKS/

Hi Malka,
It's possible set the system to mark automatically the delivery completed indicator.
First you need to set the under delivery and over delivery tolerances.You do this in customizing:
Materials Management under Purchasing -> Material Master -> Define Purchasing Value Keys.
Once you set this, you can insert this value keys on Material Master Record for the materials.
When you create the PO with a material with this value keys set the system will check the under delivery and over delivery set on customizing.
In customizing you also have the option to let the system mark automatically the delivery indicator based on delivery tolerances set.
In Customizing for Inventory Management and Physical Inventory under Goods Receipt -> Set Delivery Completed Indicator, you can determine for each plant whether the system automatically sets the delivery completed indicator for delivery quantities within the underdelivery and overdelivery tolerances.
You can test setting the under delivery for 0 (with a warning message) and see if the system will only mark delivery complete only for over delivery.
You can also work with the following Badi: MB_GOODSMOVEMENT_DCI. This Badi also allows custom logic for setting the delivery completed indicator in a PO item.
Message: M7 433 (The "delivery completed" indicator is set for the purchase order item)
Regards,
Rodrigo

How to execute availability check against delivery date in purchase order

Hi all
In MD04, I know that "available date = delivery date in purchase order + GR processing time" & "GR date = delivery date in purchase order". When I execute availability check in production order, I will get material's committed date = available date. But I hope to get material's committed date = GR date in purchase order.
For example. delivery date in purchase order is 2012/02/06 and GR processing time is 2 days. After ATP in production order, I will get committed date 2012/02/08. But I hope it show 2012/02/06. How to customize it.
(The GR processing time must be set 2 days for MRP calculation. it can be changed to 0.) Thanks!!

Hi Rita,
One Doubt, If you say that material commited has to be the GR date and you do not wish to wait for GR processing time, then why do you have the GR processing time in first place.
For ex. My client, we get the stock as per GR in Quality inspection and so we have GR processing time considered for available time in MD04. But since the business considers the Inspection stock as avialble, The stock gets reflected in avialibility check the moment GR is done.
So please explain your requirement in detail. There could some way to do so. If not the raise an issue with SAP.

How to enter a specific vendor for the delivery costs in purchasing order?

Now I want to create a purchasing order including planned deliver costs such as Freight, Coustoms ect, as the vendor of such planned deliver costs is different from the goods supplier, then How to enter a specific vendor for the delivery costs in purchasing order? That means the partner for invoice partner will be two vendors at least in one purchasing order. thanks very much.
<i>
<b>No one would like to answer this question?</b></i>
Message was edited by:
King Qi

hi,
You can have vendor at each condition record level.
try it out.
cheers
Rav

Delivery date in Purchase Order Header

Hi all,
In which table is Delivery date in Purchase Order Header stored.
the screen field name is eeind.
Thanks

Table EKET, Field EINDT or LPEIN try to look from se11 or se16n
reward point if correct

Delivery date in Purchase Order in the item overview

Hi all,
In which table is Delivery date in Purchase Order in the item overview stored.
the screen field name is eeind.
Thanks

In table EKET in field EINDT the delivery date is stored, based on the Schedule lines in the PO Item

Source inspection before 365 days of delivery date of purchase order

Hi Experts,
Business wants to create source inspection lot well in advance before 365 days of delivery date of purchase order. this lot is required to record results.
In SAP, transaction code QA51 allows only two digit characters for 'number of days for opening period' so system is not creating inspection lot for more than 99 days delivery date from current date.
Please advise.

Hi Patel, I really got interested on this particular issue because we have been using source inspection in our company for a while. After some investigation on ABAP code of report I will share with you my fact findings:
1) System calculates the start date of source inspection (delivery date from PO - Leadtime from q-info record). For example, in my test case it was 14.08.2015 - 0 days. So field g_datum below will be 14.08.2015:
2) System then checks if you are running the report in background (highlighted in yellow above). If so then it will check if the start date of inspection (g_datum) falls on opening horizon (g_datum_eroff). The opening horizon is calculated as per formula below (system login date + opening period). As an example: 14.08.2014 + 30 days = 13.09.2014.
Default opening period (p_eroff) is 30 days:
3) So all-in-all, when you are running QI07 online you´ll get a yellow traffic light on the long leadtime PO but you will be able to process it (on-line). However if you run the report in background (job scheduling) system will only create inspection lot to the relevant POs if the PO's delivery date falls on the 30 days window based upon the current date.

Delivery document from Purchase Order

Hi Experts,
How can I create a delivery document from Purchase order type NB?
I have created a delivery from po type UB, and there is a shipping tab at the item. Do I need also a shipping tab in NB to create a delivery? If yes, how can I customize it?
Thanks.

Hi
I think you are talking about NB for intercompnay stock transport order. For that you need to customization in below link
spro>MM>purchasing>Purchase order>setup stock transport order
Apart from STO there is no ther delivery for PO. Because for PO you can do only inbound delivery. For that you need to have confirmation control key defined in customization and then you need to give it in PO. Then you can create a inbound delivery for PO and gainst inbound delivery you can make GR.
Regards
Antony

Fixed Day in a week as Delivery date in Purchase Order.

Dear All
I have the below requirement
For a material/ vendor combination users would like see always a fixed day as delivery date in Purchase Order.
For example for a Material X and Vendor Y always Wednesday of the week should be delivery date.
Whether this can be achieved ?
Can you please let me know your thoughts on this
Regards
Shyam

Dear Jurgen
Thanks for referring to the post.
But actually my requirement is bit more specific. For material-vendor combination the deleivery date should be a particular day in a week
Ex : Material X and Vendor X1 = Monday
Material Y and Vendor Y1=Tuesday
This requirement I believe is quite difficult in achieving for a PR from MRP. That's why I put the question as whether we can achieve this when we convert the MPR PRs to PO s ?
Please let me know your thoughts on this
Regards
Shyam

Delivery Address in Purchase order

Hello Expert
Delivery address on purchase order.
I am trying to make changes in Delivery address tab at item level for Intercompany purchase order but the changes are not reflected in print preiview.
But the same changes I am trying to make in delivery address for standard purchase order and Servie order
Changes are refelect in print preiview.
Can you please guide us what must the settings which are not affecting changes in Intercompany purchase order.
Thanks in advance
Abhi

The print preview (or the print itself) is generated via a program assigned to an output type. If you have a custom format, it is possible that the program does not pick up the delivery address from the PO item, but from somewhere else (probably plant address).
You will have to check the smartform and its driver program for this purpose.
You can get the program name / smartform name from the output type configuration (check the output type that gets triggered by clicking the messages tab).
IMG > Materials Management > Purchasing > Messages > Output Control > Message Types > Define Message Types for Purchase Order
Regards,
Aroop

Uncheck Invoice receipt indicator in Purchase Order Local

We want to uncheck invoice receipt indicator in Purchase Order Local ( field BBP_PDSET-IR_IND) when a Shopping Cart is complete and PO Local is created automatically by system.
We are using BADI BBP_DOC_CHANGE_BADI with Method BBP_PO_CHANGE but no changes are made. BADI is not accessed when PO Local is created automatically but only when we modify PO Local with transaction BBP_POC.
What we can do?
Regards.

Hi David,
the BBP_DOC_CHANGE_BADI is actually accessed during automatic creation. You can see this by putting an external breakpoint in the badi for user WF-BATCH.
The IR_IND is based on the vendor data, if you clear the invoice receipt indicator there it will not be set in the po. The vendor data is checked later on, so that's why you don't see any change. As it will clear the ir indicator in the badi, but then sets it again later on.
Regards,
Robin

Creating inbound delivery for the purchase order line items

Hi Experts,
Please let me know how can I create inbound delivery for the purchase order line items? Say, I have a purchase order with 5 line items in it. I wanted to create an inbound delivery for only 2 line items at this point of time. Which SAP Standard transaction I have to use and what all data I need to populate? I would appreciate any help on this and will reward the right answer. Please let me know.
Thank you in advance.
with regards,
Muthu Ganapathy.

Hi,
While creating the inbound delivery (VL31N), intially all the items will be shown, see the advance shipping notfication - from the vendor for which he has send confirmation & rest items you can delete simply & save. & next time when the vendor sends rest advance shipping notifcation (confirmation), you can receive them.
Hope this answers your query.
Regards
Irfan.

Selection of a price list based on the delivery date of purchase orders

Description of requirement:
One of our customers would like to have the price list selected on the basis of the delivery date of purchase orders rather than on the posting date.
The customer wants to have this feature available by the date scheduled for their go-live, that is January 2nd 2008.
Best regards,
Emmanuel Ruellan

Dear development team,
Is it possible to have the above functionality in a future version?
Best regards,
Emmanuel Ruellan

Partrial Delivery Indicator in Purchase Order

Similar Messages

Maybe you are looking for