Parts of timeline render out, the whole timeline wont..!

I am trying to export my 90min-long timeline, tried with Premiere, tried with AME, CUDA on and CUDA off, but no luck - it kept failing, sometimes minutes into the render, sometimes hours, sometimes moments before finishing. As a troubleshooting attempt i tried rendering out the timeline in 20min chunks, hoping to figure out where in the timeline any potential faulty clip may lie... and well, all of those partial renders came out fine! (well, with some hiccups - had to restart a couple that failed, but in the end all exported fine). I thought it was maybe an issue with MB Looks or Denoiser - but individual clips of those export just fine!
It's a pretty heavy project so I'd guess my PC may not be keeping up? But i've rendered much bigger stuff in the past on my set up; it's always taken long time, but in the end it always worked!
Can anyone suggest how to tackle this problem, please? It's quite urgent, the film has to screen next week...
Thanks,
Matt
PS. I'm on Premiere CC / Win7 64bit / Nvidia Quadro 2000 / 8GB ram - not ideal setup but it's served me well...

If you've succeeded in rendering every second of the sequence when it was broken down into smaller chunks, then I would look at overheating issues. It's been a while since I had occasion to monitor temperatures, so I can't recall what utilities I used. If you don't have a utility handy, post here and I'll wager others will come along with suggestions.

Similar Messages

How do you render specific parts of timeline without rendering the whole sequence? cs5

New to CS5 Premiere pro, im trying to render certain sections of my timeline without rendering the whole timeline, in Avid you would just mark in and mark out the area you wanted to render, is there something similar to that or do you always have to render the whole timeline?

Place Work Area Bar over the part of the timeline you want to render and then hit Sequence/Render Whole Work Area.
If you mean Export also place work area bar over section and make sure in the export settings, Source Range (bottom left) is set to Work Area.

Stretching the whole timeline in Motion 2

Hi guys,
I was or am working on a project which is almost finished but the movie needs to be a little bit slower. I already read that there is no real possibility to enlarge the whole timeline - just via the scrubbing filter.
Is there no other way to scale the whole timeline? And how does it work in Motion 3?

Slower or longer? Allowing for a possible translation error, which do you need?
If you make it slower, all of your timing changes and most of your effects will need to be redesigned.
Longer is easy, just enter a new value in the length field. But then you have to pull out your layers and groups to cover the new length. Just grab them and pull to the right. But that won't work in all cases, of course. If you are using a ten second movie you cannot pull it out to 12 seconds without heavy processing.
bogiesan

I tried exporting my film, but it wouldn't export. So, then I tried rendering all of the clips. However, as soon as I did that, it said that the project itself was offline. Yet when you go into the actual project itself, you can play the whole timeline.

I tried exporting my film, but it wouldn't export. So, then I tried rendering all of the clips. However, as soon as I did that, it said that the project itself was offline. Yet when you go into the actual project itself, you can play the whole timeline back and there aren't any clips showing that the media is offline. Does anyone have any solutions?

What version is FCPX and what version is your OS?
How are you exporting and with what preset?
Luckyl1987 wrote:
However, as soon as I did that, it said that the project itself was offline. Yet when you go into the actual project itself, you can play the whole timeline back and there aren't any clips showing that the media is offline. Does anyone have any solutions?
No idea about that.. Can yu post a sreen shot of the error message?
Russ

I downloaded an album recently, but I guess my internet was going in and out the whole time, and now 5 of the 14 songs will cut out after a few seconds. How can I re-download those few songs?

I downloaded an album recently, but I guess my internet was going in and out the whole time, and now 5 of the 14 songs will cut out after a few seconds. How can I re-download those few songs?

Welcome to the Apple Community.
Try deleting the problematic tune (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

My iphone 5(not S) screen popped out, the whole screen and digitizer, will they replace this if i go to the apple store?

my iphone 5 screen has been cracked but i recently dropped my phone again and the whole screenpopped out. its still attached by a black cord but now the whole screen is just black and i cant use it at all. will the apple store replace my screen or will i have to get a whole new iphone?

You may need to buy an entirely new iPhone. Before when the screen was just cracked you could have got an out of warranty replacement for a fee but now the screen has popped out and will most likely be classed as catastrophic damage.
At the link http://www.apple.com/support/iphone/service/faq/ it says:
What type of damages are not covered by my warranty?
Apple's Limited Warranty for iPhone excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications. Please review the warranty for further details.
An iPhone that is ineligible for warranty service may be eligible for Out-of-Warranty (OOW) Service. For example, an iPhone that has failed due to damage or liquid damage is ineligible for warranty service but eligible for OOW service. However, certain damage is ineligible for OOW service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. Please see Apple's Repair Terms And Conditions for further details. Refer to this article to check if the Liquid Contact indicator on your product has been triggered.
If your iPhone is not eligible for warranty service, you may wish to contact your carrier for other options.
So all you can do is take it into a Store and they will make the decision.

My new iPad keeps knocking out the whole household's WIFI

I got a new iPad 16GB 4th gen today. I have got as far as connecting to my WIFI to set it up and have typed in my password for the WIFI. Now I cannot get any further because the iPad keeps knocking out the WIFI connection for the whole household. I literally cannot set up my iPad because it keeps killing my connection the minute it is switched on. Can anyone help?

Sounds like there is a bug in the firmware of your router.
Check for a firmware update on the support web page of your router's manufacturer.

How do you add a effect to a certain part of a track, not the whole track itself, how do you add a effect to a certain part of a track, not the whole track itself, how do you add a effect to a certain part of a track, not the whole track itself

How can i add echo to vocals only on certain parts of the vocal without it effecting the whole vocal track itself?

You can only do this in newer versions of Garageband (5 & 6).
Here's a brief tutorial::
http://audio.tutsplus.com/tutorials/production/how-to-give-life-to-garageband-tu nes-with-automation/
Or, you can simply do an old-fashioned volume cross-fade between identical tracks:
http://www.thegaragedoor.com/tutorials/automation.html

Why does my back arrow close out the whole site and not just the one page?

I just replaced my old MacbookPro with a new one. The one difference that is driving me crazy is that the back arrow (button) closes the whole site, not just the page that I am on. Is there a way to change this. My old computer just sent me back to the previous page. Thanks in advance!
Cindy

Red buttons, back buttons, I guess specifics matter.
Glad you figured it out.

How can you delete part of a message not the whole conversation?

How do you delete part of a message from a conversation on the new upgrade? You used to be able to click on the text, ticking it and then hit trash but thats gone. Please help!!

click and hold on the bubble, you will now see "copy/more" select 'more'
you can now choose which bubbles to delete by selecting a check mark next to them and then hit trash can

Hello.I have installed windows 7 home premium on my macbook pro mostly for playing games.But there is a problem.Whenever I launch a game, the screen just zooms in one part and I cannot see the whole screen.Therefore,I cannot play.Help please !

I tried to re-install games as well, restart my macbook but it did not work.I want to add that even before using bootcamp, the same thing happened to the screen.So, I do not think that there is a problem with windows 7.
Thank you in advance

Device Manager which is in Control Panels
I strongly recommend AIDA64 to show everything, temps, fans, chips, drivers and versions
http://www.aida64.com/ Windows has better tools to show you every service and knick and cranny
https://discussions.apple.com/thread/2769294
http://realitypod.com/category/hacks-and-cracks/mac-hacks-and-cracks/
MacBook definitely uses Cirrus - probably iMac

Setting "in" and "out" - why does it export the full timeline ?

Hi folks.
Well, I'm scratching my head.
I go into Premiere, onto the timeline, and set an "in" point and an "out" point. I then get Premiere to render the video. It renders out the whole timeline, eventhough I told it to render only the "work area" which of course one would think would be that area I told Premiere I wanted, because of my "in" and "out" points.
The manual is very vague, and I just don't get it. I don't want to do any razor cuts, I just want to get Premiere to render out the video inside my "in" and "out" points I've inserted.
Any help would be appreciated,
Dave.

The work area bar is different than setting in and out points. It's the bar with the (I think) blue handles at the top of the timeline. Drag those handles to the points where you want rendering to start and stop, and hit Enter.

Speed change affects whole timeline????

When I change the speed a clip in my timeline, it shifts my whole timeline out of sync. Im sure this is just a setting but i cant figure it out. Any suggestions would be appreciated. Thanks.

thats how it works db
you have a clip which already exists in the timeline, it has an in point and an out point and hence a duration. changing its speed will therefore change the duration, making it longer if you slow it down, or shorter if you speed it up. any changes you make will obviously ripple through the rest of the timeline.
its best to adopt a new approach. change the speed before you place the clip in the timeline
a neat trick is to use the match frame to source function ...
park your playhead on the first frame of the clip in the timeline that you want to change
press cmd-opt-f to match frame the source into the viewer
press cmd-j to open the speed dialog to adjust as wanted
press f-11 to replace the timeline instance with the slower/faster version in the viewer
hope it helps
edit -- check up Vol III : Chapter 16 (Page 307) for the nitty gritty

Flash cs5 suddenly flash selects whole timeline

hi
suddenly my flash document will not let me select a range of keyframes. Clicking on any frame selects the whole timeline.
Control click will select an individual frame. So I have the option of selecting 1 frame or whole timeline and nothing in between.
Span based selection is not turned on.
I have tried restarting but problem persists. I can go back to an older document and edit that timeline as normal, but I have done an awful lot of work since that older vesion.
using mac book pro, win7 4 gig ram, cs5
thanks

hi,
thanks for suggestion, very much appreciated. What i did in the end
was copy and pasted elements I needed into a new empty flash document.
that fixed it

Making the whole po line item as a non editable one (Greyed out)

Hi all
can any one please let me know is there is any way we can grey out the whole line item,
i mean to say non editable mode.
i am working on a user exit where based on certain field entries i have to make the whole line
item as an non editable one.
For example po change transaction if there are 5 line items i want to make the three as a non editable one and i have a user exit
with me but dont have the idea of how to make it geryed out.
Thanks in advance.
Joe

Hi
Do you have a PO release strategy implemented. This can be done through PO release strategy. please tell the exact requirement whether this is for all users ???
hope it will help
Regards

Parts of timeline render out, the whole timeline wont..!

Similar Messages

Maybe you are looking for