Party and Service not defined

Hi ,
  I am working on my QA box for my Idoc ->XI-->3rd party HTTP scenario. When I try to send a message I am getting "PARTY AND SERVICE not defined" error message. I am puzzled because the same scenario worked well in DEV box and I have set all the settings in the directory ( service w/o party for R3 LS, party with service for 3rd aprt, receiver agreement, receiver determinations, interface determinations) but still I get this error. The trace stops at the receiver split level. I checked the cache notifications in the directory they were all "RED" for change lists..is that a hint why I am gettting this error??
Any ideas....
-Teresa

Hi Teresa,
maybe you can find a hint in the Cache Refresh logs:
http://<server>:<port>/dir/support/public/index.html
and then choose "View Memory Log". Perhaps you have to
raise the log level by adjusting the settings via
"Edit Memory Log Configuration". (But be aware the
a higher log level may slow down the system).
Hermann

Similar Messages

  • In SXMB_MONI getting Error as "Party and service not defined "

    Hi All,
    I am trying to send Purchase order IDOC from ECC-->PI-->ARIBA Network.
    The message has failed in PI  saying "Party and Service not Defined"
    In Trace it says "There is no Interface Determination configured for receiver party 0000100007 and receiver service"
    I have created ECC(Sender ) and ARIBA NETWORK (Receiver ) as Business System and Partner type as 'LI'
    Please help me .
    Thanks,
    Akhila.A

    Hi Akhila
    If the outbound IDoc from ECC uses a partner type other than LS, then you need a corresponding Party for it.
    In the party object, you need to set the Identifier accordingly. For your case, it would be something like:-
    Agency: The BS name of your sender ECC system
    Scheme: ALE#LI or ALE#LI#<Role> (If there is a Partner Role set in the Partner Profile)
    Name: 0000100007
    When you create your ICO, you need to check "Sender Uses Virtual Receiver" and enter the Party object above.
    Rgds
    Eng Swee

  • Error: Party and service not defined

    Hi,
    I am trying to update an existing scenario IDOC -> XI(BPM) -> FILE.
    In BPM, I have placed a switch containing two branches. First branch is selected if the value of RCVPRN is 100000021. The second branch is selected if the value of RCVPRN is NOT 100000021. Now when an IDOC is posted from R/3, it gives me following error...
    "Party and service not defined"
    I double checked Interface Determination, Receiver Determination and Receiver Agreements, but did not find anything wrong. Further, the trace in SXMB_MONI shows a part as follows...
    <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
      <Trace level="1" type="T">I N T E R F A C E D E T E R M I N A T I O N</Trace>
      <Trace level="1" type="T">Cache Content is up to date</Trace>
      <Trace level="1" type="T">...There is no Interface Determination configured for receiver party 1234567890 and receiver service</Trace>
      <Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) 1234567890 EUPEXR.IDCREF01</Trace>
      <Trace level="2" type="T">...valid InbIf without Condition: EUPEXR.IDCREF01</Trace>
      <Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
      </Trace>
    </Trace>
    </Trace>
    Any idea why it complains about the condition value '1234567890' as party ?
    Thanks.
    - Atul

    Atul,
    I think you can use xpath in your reciever determination. If the value of RSVPRN is equal to 1234567890 then let it send to file adapter else if not equals then send to AS/400.
    See this weblog for some help on xpath:
    /people/shabarish.vijayakumar/blog/2006/06/07/customise-your-xpath-expressions-in-receiver-determination
    /people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
    /people/prasadbabu.nemalikanti3/blog/2006/09/20/receiver-determination-based-on-the-payload-of-input-dataextended-xpathcontext-object
    ---Satish

  • Party and service not defined error

    Hi
    I have IDOC to flat file scenario and i have configured the reciever channel, receiver agreement,  interface determination (included operation mapping in ID), receiver determination and receiver agreement. I have used party for receiver communication component, when i am trying to send an idoc, it is failing with the following error in moni.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Message Split According to Receiver List
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">PARTY_SERVICE</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:Stack>Party and service not defined</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>

    Why are u using party for this scenario party are usually used for B2B communication.
    u do one thing in receiver agreement give party and service name in sender and receiver header mapping
    chirag

  • Party and Service not found

    Hi
    I am trying to implement IDOC to File scenario following the below blog.
    <a href="/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters:///people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
    In config I created
    Receiver communication channel
    Receiver Agreement
    Receiver Determination
    Interface Determination
    as specified in the blog.
    Sender agreement is not required as per the blog.
    RFC destination
    I created an tRFC port
    added partner profile
    when I try to test it using transaction code we19
    Standard outbound processing
    I filled the sender port, partner no and partner name
    it asks me for Receiver port which I have no idea what to use?
    I used the same port as I used for Sender
    When I checked in message monitoring using SXMB_MONI i see the red flag with error as
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Message Branch According to Receiver List
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">PARTY_SERVICE</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Party and service not defined</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Please let me know if I am missing something or going wrong any where.
    Thanks
    Pavan

    Hi,
    check out correct business system is associated and pointing to correct R/3 system. Check the Integration Diretcory>Open Business System>Adapter Specific Identifier and check teh logical system name mentioned. Does this point R/3 system ?
    just cross verify with steps given in the document, mentioned in my earlier post.
    regd. metadata in IDX2, it is not required always.
    Go thru these Error Analysis Steps so that you can get to know-
    http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
    Rgds,
    Moorthy

  • Party and service Error.

    Hi Every one
    I am getting follwing error in SXMB_moni.
    Actually i have fired one idoc through WE19 it was sucessfull.
    After 2 hrs i fired same idoc through WE19 and ima getting same error from there on for any Idoc.
    Error is this one .
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Message Branch According to Receiver List
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">PARTY_SERVICE</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Party and service not defined</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    /people/shabarish.vijayakumar/blog/2006/09/13/wanna-party
    I have got this link but in this it is shown for Party.
    in my scnerio there is no party.
    only Service is present.
    Please help....

    This blogs will help u as well in posting IDoc
    These blogs will help u...
    <a href="/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi Steps for Posting IDOC's</a> by Ravikumar Allampalam
    <a href="/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi Configuration for Pushing IDOC's from SAP to XI</a> by Swaroopa Vishwanath
    Regards
    Santhosh
    Remember to set the thread to solved when you have received a solution
    [url=Use a Good Subject Line, One Question Per Posting - Award Points;  Use a Good Subject Line, One Question Per Posting - Award Points[/url]

  • Service with party and service without party

    Hi all,
    Can any body please suggest me when do we choose service with party and service without party?
    We have a scenario where i need to use the webservices provided by the third party Java Based system. i am sure that i need to define Business service as technical details of the system are not available in the SLD. Please do correct me as i am configuring this scenario for the first time.
    Any links related to a Web Blog / Thread would be great.
    Thanks and best regards,
    Kulwant Singh

    hi
    1.we go for service without party when we are having A2A communication.
    A2A means application to application communication, it is used when two systems in same landscape try to communicate with each other. Systems in same landscape means both the systems are belongs to same organization or a company.
    Normally in A2A communication sender and receiver is inside one organization and developer have freedom to define communication rules .
    refers to link
    http://help.sap.com/saphelp_nw04s/helpdata/en/66/58934257a5c96ae10000000a155106/content.htm
    2.we go for service withparty when we are having B2B communication
    B2B means Business to Business  communication .It is used when there is exchange of information between two different Parties or companies or landscape.
    When two applications in different companies communicates with each other we call it  B2B Communication.
    in case of B2B every party has it own rules which must be followed if we want to communicate between different organization. 
    refers to link
    http://help.sap.com/saphelp_erp2004/helpdata/en/ca/efb540efe68631e10000000a1550b0/content.htm
    rewardspoints if helpful
    BR
    Kasturika
    Edited by: Kasturika Phukan on Feb 12, 2008 6:06 AM

  • Difference between party and service without party

    Hi all,
    Please tell me the difference between Service and Service without party  and also let me know what is Business system, Business service and Integration process.
    regards,
    sudha

    Hi Sudha
    <u><b>Party</b></u>
    Party is used to represent a Business Partner (doesnt belong to the current landscape) which is defined in B2B Scenarios.So All the systems/services accociated with the Party are referred only as Services.
    <u><b>Service without Party</b></u>
    It is used to represent any service within the landscape and is used in A2A communication.
    Check the Threads for reference...
    Party & Service without Party
    Diff b/w Party & Service w/o Party in Integration Directory?
    Differenz between services to use
    Party and Service without party
    Use-Case for Business Services (Service Without Party) in SAP XI
    <u><b>Business System</b></u>
    Business system will use only when you defind in SLD to identify your sender or receiver.
    <u><b>Business Service</b></u>
    Business service will use to indetify your sender or reciver if we can't defind in SLD then we need to use the business serivce
    Cheers..
    Vasu
    <u><i><b>** Reward Points if found useful **</b></i></u>

  • Party and Service without party

    Hi All,
    I totally understand the definition of Party and services, but on an application point of view when do we actually go in for party and when do we go in for service w/o party??? I feel the diff. is minute but there should be an industry std. and I would like to follow it...
    My scenario is Idoc communicating to HTTP using XI 3.0..
    Thanks,
    Teresa

    Hi Teresa,
    this is more or less a question of organizing your scenarios. Until now I could not experience any difference between "Party" and "Service w/o Party". We use "Service w/o Party" in all internal scenarios, meaning that no external partner is involved. If it comes to a scenario where we need to communicate with external partners then we place it under "Party". That's all about it. I also asked this question on the XI 3.0 education and the answer was the same....
    Brgds
    /Michael

  • Difference between party and service

    Hi,
       I know  when we are going to  party and service (Normally party means. when we are doing Business to Business ) but what is exact difference  between party and service.. and if possible  definitions  also..
    Thanks
    Babu.

    Babu,
    Refer to url http://help.sap.com/saphelp_nw04/helpdata/en/87/1d6e3fefa13042e10000000a114084/frameset.htm
    An excerpt
    Services without a party are typically used when configuring company-internal processes. Parties (with assigned services) are typically used when configuring cross-company processes.
    Also refer to one of your previous forum questions and my response Re: Business System and Business Service Posted: Nov 28, 2007 4:31 PM in response to: BABU
    You usually use business system services when configuring internal company processes.
    You usually use business services when configuring cross-company processes. In this case, you only make your interfaces known to the business partners involved and either do not make any details about your own system landscape available, or only specific details.
    Hope this helps,
    Mike

  • What is the significance of Party and Service without Party in ID? Help!

    Hi Experts,
        I often get confused with the Party and Service without Party in Integration directory. What is the difference between these two? When to use Party and When to use Service without party?
    Kindly help!
    Thanks
    Gopal

    Hi,
    you need to use a party when you want to change some header fields
    of your XI message (when communicating in B2B scenarios for example)
    with party you can also use IDOC partner profiles other then LS
    (like LI, VN)
    but in most cases in A2A scenarios you never use the party object
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • XI 3.0, Party and Service problems (IDoc inbound)

    Hi,
    The scenario is:
    Flatfile (J2SE plain adapter) => XI => IDoc => R3
    The basic functionality <b>Service Without a Party</b> works ok. But I run into a restriction when trying to have more than one <b>Business System</b> having the
    same <b>Logical System Name</b> (XI doesn’t allow it). Basically I don’t want to have one unique <b>Logical System Name</b> for every business scenario, especially when they come from the same legacy system (<b>Technical System</b>).
    Is it possible to have only one <b>Logical System Name</b> for all the interfaces that comes
    from the same legacy application (or even from all the legacy systems)?
    Tried even to do the same with <b>Party</b> objects, but there I run into errors (can’t even get the IDoc through):
    <b>"IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</b>
    or
    <b>"IDOC_ADAPTER">ATTRIBUTE_INV_RCV_PARTY</b>
    depending on the configuration.
    Is there any documentation about how these configurations
    should be made?
    br.samuli

    Hallo Samuli,
    i guess, you have the same problem that has already been discussed in here. That is if you create a new Business Scenario in the Configurator you can not see your business system you want to use. But that is not an error and also not a restriction of XI as you will discover in the post "can't assign business system twice". It is possible to use the logical system name of a legacy system for all interfaces coming from this system, everything else would not make sense.
    Here the link to the message: can't assign business system twice
    Best Regards
    Christine

  • Error in Service with Party and Service without party scenario

    Hi All,
    I  am configuring an external system to customer SAP system scenario.
    I have configured the external file system as Service with Party and the receiving SAP system as Service without party.
    All the configuration including the "Virtual receiver" set up has been done properly but i am still getting the error "No receiver could be determined".
    Can somebody help me on this ?
    Thanks in advance.
    RGds,
    Vasanth.

    Vasanthakumar,
    in my previous experiences with internal/external parties communication, I've found out that the best practice is to create an integration scenario and then create the configuration scenario from scenario wizard. It is much simpler and easier.
    Briefly, you'll have to create a dummy party/service in order to "wrap" your internal system, since the external party should not receive information regarding internal systems (Business system name, for example).
    Regards,
    Henrique.

  • Listener showing services not defined in listener.ora file??

    I have a puzzle.
    I have a listener.ora file which lists 4 services. (4 SIDS).
    when I start the service, I do a status command and it lists the 4 services as defined in the listener.ora,
    as expected, however a couple of minutes later it adds more services (which appear to be all the started instances) .
    Is this the norm?
    Its not what Im expecting.
    thanks in advance.
    Mark

    Hi Mark,
    as long as the databases with different architectures are on different boxes, no problem.
    If you would migrate them one day to one box you need two listener. One for the 32bit instances and one for the 64bit instances. To avoid that the problem occures by accident, don't use port 1521.
    Also if you don't want a database to automatically registering itself to a listener on port 1521 set the LOCAL_LISTENER init.ora parameter to the listener usually serving the instance.
    There are two docs in metalink you might want to read:
    Note:298697.1 is about the 32bit/64bit problem
    Note:76636.1 is about (automatic) service registration

  • Name and city not defined in FB60 for one time account

    Hello Guru's ,
    We are on SAP ECC 6.0 and I have defined a one time vendor in the standard account group CPD One-time vend.(int.no.assgnmt).
    In the screen layout for that account group I have the address details for name1 and postal code, city defined as optional entry. In the master data of the one time vendor I have however created an address so the address details like Name1 and City are filled.
    When I use MIRO for creating an invoice the address details are filled for the one time vendor, but when I use FB60 it prompts the following message: 'Enter a name and city for one time postings'.
    Why are the address details not filled in transaction FB60 while the have been filled in MIRO ? And why can I not post the Invoice as I have defined the name and address as optional entry in OBD3 ?
    Thanks as ever for your reply's

    Yes I understand that. The problem is however that we have invoice scanning and when the invoice is scanned it comes into the rework fase where we enter the one Time vendor. In a normal situation the invoice wille be created and parked (status completion) after which AP clerks can either enter a Purchase order or not. With the One Time vendor I don't get an invoice document as it prompting for the Name and City. Becaue of that I entered the name and city in the vendor master data and set them to optional in OBD3. Nonetheless it still gives me the error. Also in transaction FB60. So if it doesn't work with making fields optional in the vndor accoutn group and entering the requested data in the vendor master data I probably must set the error message some where into a waring ? Funny thing is that it does work for the MIRO transaction as I am not getting the error there.
    Thanks
    Edited by: Antoinette Stork on Jun 19, 2009 2:46 PM

Maybe you are looking for