Party and Service not found

Hi
I am trying to implement IDOC to File scenario following the below blog.
<a href="/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters:///people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
In config I created
Receiver communication channel
Receiver Agreement
Receiver Determination
Interface Determination
as specified in the blog.
Sender agreement is not required as per the blog.
RFC destination
I created an tRFC port
added partner profile
when I try to test it using transaction code we19
Standard outbound processing
I filled the sender port, partner no and partner name
it asks me for Receiver port which I have no idea what to use?
I used the same port as I used for Sender
When I checked in message monitoring using SXMB_MONI i see the red flag with error as
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PARTY_SERVICE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Party and service not defined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please let me know if I am missing something or going wrong any where.
Thanks
Pavan

Hi,
check out correct business system is associated and pointing to correct R/3 system. Check the Integration Diretcory>Open Business System>Adapter Specific Identifier and check teh logical system name mentioned. Does this point R/3 system ?
just cross verify with steps given in the document, mentioned in my earlier post.
regd. metadata in IDX2, it is not required always.
Go thru these Error Analysis Steps so that you can get to know-
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
Rgds,
Moorthy

Similar Messages

In SXMB_MONI getting Error as "Party and service not defined "

Hi All,
I am trying to send Purchase order IDOC from ECC-->PI-->ARIBA Network.
The message has failed in PI saying "Party and Service not Defined"
In Trace it says "There is no Interface Determination configured for receiver party 0000100007 and receiver service"
I have created ECC(Sender ) and ARIBA NETWORK (Receiver ) as Business System and Partner type as 'LI'
Please help me .
Thanks,
Akhila.A

Hi Akhila
If the outbound IDoc from ECC uses a partner type other than LS, then you need a corresponding Party for it.
In the party object, you need to set the Identifier accordingly. For your case, it would be something like:-
Agency: The BS name of your sender ECC system
Scheme: ALE#LI or ALE#LI#<Role> (If there is a Partner Role set in the Partner Profile)
Name: 0000100007
When you create your ICO, you need to check "Sender Uses Virtual Receiver" and enter the Party object above.
Rgds
Eng Swee

Error: Party and service not defined

Hi,
I am trying to update an existing scenario IDOC -> XI(BPM) -> FILE.
In BPM, I have placed a switch containing two branches. First branch is selected if the value of RCVPRN is 100000021. The second branch is selected if the value of RCVPRN is NOT 100000021. Now when an IDOC is posted from R/3, it gives me following error...
"Party and service not defined"
I double checked Interface Determination, Receiver Determination and Receiver Agreements, but did not find anything wrong. Further, the trace in SXMB_MONI shows a part as follows...
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="1" type="T">...There is no Interface Determination configured for receiver party 1234567890 and receiver service</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) 1234567890 EUPEXR.IDCREF01</Trace>
<Trace level="2" type="T">...valid InbIf without Condition: EUPEXR.IDCREF01</Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
</Trace>
</Trace>
</Trace>
Any idea why it complains about the condition value '1234567890' as party ?
Thanks.
- Atul

Atul,
I think you can use xpath in your reciever determination. If the value of RSVPRN is equal to 1234567890 then let it send to file adapter else if not equals then send to AS/400.
See this weblog for some help on xpath:
/people/shabarish.vijayakumar/blog/2006/06/07/customise-your-xpath-expressions-in-receiver-determination
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
/people/prasadbabu.nemalikanti3/blog/2006/09/20/receiver-determination-based-on-the-payload-of-input-dataextended-xpathcontext-object
---Satish

Party and service not defined error

Hi
I have IDOC to flat file scenario and i have configured the reciever channel, receiver agreement, interface determination (included operation mapping in ID), receiver determination and receiver agreement. I have used party for receiver communication component, when i am trying to send an idoc, it is failing with the following error in moni.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PARTY_SERVICE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Party and service not defined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Why are u using party for this scenario party are usually used for B2B communication.
u do one thing in receiver agreement give party and service name in sender and receiver header mapping
chirag

Party and Service not defined

Hi ,
I am working on my QA box for my Idoc ->XI-->3rd party HTTP scenario. When I try to send a message I am getting "PARTY AND SERVICE not defined" error message. I am puzzled because the same scenario worked well in DEV box and I have set all the settings in the directory ( service w/o party for R3 LS, party with service for 3rd aprt, receiver agreement, receiver determinations, interface determinations) but still I get this error. The trace stops at the receiver split level. I checked the cache notifications in the directory they were all "RED" for change lists..is that a hint why I am gettting this error??
Any ideas....
-Teresa

Hi Teresa,
maybe you can find a hint in the Cache Refresh logs:
http://<server>:<port>/dir/support/public/index.html
and then choose "View Memory Log". Perhaps you have to
raise the log level by adjusting the settings via
"Edit Memory Log Configuration". (But be aware the
a higher log level may slow down the system).
Hermann

Context menu tab SERVICE not found in IB PI 7.1

Hi,
I am working in PI 7.1 for a scenario IDOC r/3 to PI 7.1 file.
Here in IB I dont see any SERVICE tab to configure/create. I am getting error in IDX5 > Message split according to Receiver list>'Party and service not found'.
I am new to this. Could someone guide me with steps or links. I searched some links but I didnt get answers.
Thanks,
Deepak.
Edited by: KDeepak on Jul 2, 2009 2:36 PM

Here in IB I dont see any SERVICE tab to configure/create. I am getting error in IDX5 --> Message split according to
Receiver list-->'Party and service not found'.
Is it that you are looking for a tab which was called Business Service in PI7.0?........if yes then in PI7.1 we do not have such a tab.....it has been renamed as Business Component ......in ID right-click -
> New -
> Collaboration Profile -
> Business Component ---> Give Name ---> Click Create and then one more Business Component (Service) will be created under Communication Component section of ID
In PI7.1 Business System, Business Component, Integration Process will be under Communication Component..
Check if this is what you are looking at...
Regards,
Abhishek.
Edited by: abhishek salvi on Jul 3, 2009 10:09 AM

Party and service Error.

Hi Every one
I am getting follwing error in SXMB_moni.
Actually i have fired one idoc through WE19 it was sucessfull.
After 2 hrs i fired same idoc through WE19 and ima getting same error from there on for any Idoc.
Error is this one .
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PARTY_SERVICE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Party and service not defined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
/people/shabarish.vijayakumar/blog/2006/09/13/wanna-party
I have got this link but in this it is shown for Party.
in my scnerio there is no party.
only Service is present.
Please help....

This blogs will help u as well in posting IDoc
These blogs will help u...
<a href="/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi Steps for Posting IDOC's</a> by Ravikumar Allampalam
<a href="/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi Configuration for Pushing IDOC's from SAP to XI</a> by Swaroopa Vishwanath
Regards
Santhosh
Remember to set the thread to solved when you have received a solution
[url=Use a Good Subject Line, One Question Per Posting - Award Points; Use a Good Subject Line, One Question Per Posting - Award Points[/url]

Native Android Extension - Service Not Found

Greetings,
I have created an AIR native extension which I am using in an AIR for Android app. My native extension needs to use an Android Service from a 3rd party library. However, seemingly no matter what I do to hook up this Android Service in the native code, the app reports "Unable to start....service not found" at runtime.
Now I have used this service in normal, native Android apps and it works fine - I have tried duplicating the same startup process from my previous apps, that process still results in a "service not found" error in this AIR for Android app.
Does anyone know whats going on here, or had similar issues?
My only thought at this point is that the intense mangling that happens when AIR compiles an APK might be screwing up the path to the Service, therefore the class loader on the Android device is unable to find the service at runtime. However, I do not know how to prove this hypothesis.
I have gone as far as to write my own Service class which wraps around the 3rd party service, so that the service I'm requesting is in the same java package as all the other native extension code I'm writing, but that option didn't work either.
Any help would be appreciated.
Thanks.
Matt
PS - In case you're wondering, I did make sure to declare the <service> tag in my extension's manifest file.

Hey Chris!
I figured out *JUST NOW* what the issue is (and this is certainly NOT documented in any PDF, or whitepaper on Native Extensions).
The problem lies with both the Signing Certificate and the package name for your AIR Application.
Rules for Adobe AIR Native Extensions
Rule 1 (Documented)
The Code Signing Certificate package must match the application id in your app.xml
so if the certificate package is `com.my.company`, then the air app id must be `<id>com.my.company</id>`
Rule 2. (Partially Documented)
When packaging a native extension for android using ADT, a prefix is added to your package name so it looks like `air.com.my.company`.
(Not Documented)
When the Android ActivityManager tries to run your service it looks for it in `air.com.my.company`. Thus, the Service class must live in the same package (including the 'air' prefix) within your java code. My TestService class now is defined as `air.com.my.company.TestService`
And with the following manifest, it runs just fine!
<application>
 <activity android:name=".TestActivity">
 <intent-filter>
 <action android:name="TestActivity"/>
 <category android:name="android.intent.category.DEFAULT"/>
 </intent-filter>
 </activity>
 <service android:enabled="true" android:exported="true" android:name=".TestService">
 <intent-filter>
 <action android:name="test.default.service"/>
 </intent-filter>
 </service>
</application>
Start the service using the following code
startService(new Intent("test.default.service"));
Thanks again!
Bow

Windows 7 64 bit, Apple Mobile Device Service not found.

Hi First post, sorry sorry if this is in the wrong place
I have a dell Laptop running Windows 7 X64 and Apple Mobile Device Service is not installing and cannot be found in services.
note the account has Admin privildges (the logging below is wrong) and UAC and Virus protection has been switched off.
I have used the apple processes to uninstall everything and then reinstall multiple times. I am defintly trying to install the latest 64 bit version.
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
Dell Inc. Inspiron 1545
iTunes 9.0.2.25
QuickTime 7.6.5
FairPlay 1.5.23
Apple Application Support 1.1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device Driver not found.
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number D67ADF69AA323879
Current user is not an administrator.
The current local date and time is 2010-01-11 16:46:14.
iTunes is not running in safe mode.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** iPod/iPhone Connectivity Tests **
iPodService 9.0.2.25 is currently running.
iTunesHelper 9.0.2.25 is currently running.
Apple Mobile Device Service not found.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
** iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.
thanks

I am having the same problem for three-four months now. When I called the help-desk of apple, they said windows 7 x64 wasn't compatible with itunes, and they told me that I had to wait for a newer version of itunes.

Driver and software not found. Please help

Hello,
I recently updates my iTunes too the latest version now my disc burner isnt working. I get an error saying disc burner and software not found. I tried to run diagnostics and have scoured the internet and forms for answer. I have read this and it says i am not an administrator but on my computer i checked and i am. Unless i am doing it wrong. Any help would be greatly appreciated.
Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
Dell Inc. Inspiron 5521
iTunes 12.1.1.4
QuickTime not available
FairPlay 2.7.50
Apple Application Support 3.1.2
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.1.1.3
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 000000EF2D410840
Current user is not an administrator.
The current local date and time is 2015-04-03 10:25:39.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 7c442418567b765b60e544f855b8db56
iPodService 12.1.1.4 (x64) is currently running.
iTunesHelper 12.1.1.4 is currently running.
Apple Mobile Device Service service 3.3.0.0 is currently running.

Hey dancin_chick,
If you find you are unable to burn CDs from iTunes on your Windows computer, I would suggest that you troubleshoot using the steps in this article -
iTunes 12 for Windows: If you have trouble burning a disc
Thanks for using Apple Support Communities.
Happy computing,
Brett L

Addon has failed to connect to the DI API. Service Not found

Hi
I've upgraded database B1 8.8 SP0 PL11 to B1 8.8 SP0 PL15.
Addon was complied on B1 8.8. SP0 PL11 envrionment.
I've error message when I started addon.
Addon_Name addon has failed to connect to the DI API.
Error Details:
Service not found.
DI API was uninstalled and re installed.
And I deleted SM_OBS_DLL directory.
But I can not resolve this issue.
Please help me,
Joanne

Hi Joanne,
I had exactly the same problem with patch 15 after an upgrade from 8.8 patch 13. The SBO client didn't automatically update so I had to use Add/Remove programs to remove the old client and DI API and then the new client install failed from the B1_SHR folder with a 1158 error (no description).
What I did to correct it was install the DI API from the <servername>\B1_SHR\B1DIAPI folder and then run the client install afterwards. This time the client install worked fine and I can run addons that use the DI API. I think there was some registry entry issues, maybe with the upgrader or the client installer.
Kind Regards,
Owen

Import javax.xml.ws.Service not found

I am getting error import javax.xml.ws.Service not found. Which jar file I should add in JDeveloper and from where?
This is my program:
package examples.shop.client;
import java.net.URL;
import javax.xml.namespace.QName;
import javax.xml.ws.Service;
import examples.shop.impl.session.PricerBean;
* This class is an example of a standalone JAX-RPC client code which uses both
* the static stub and the dynamic proxy approach to get a reference to the
* remote Web Service
public class PricerClient {
static String host = "localhost";
static String portType = "PricerBean";
static String serviceName = "PricerService";
static String serviceEndpointAddress =
"http://" + host + ":8080/" + serviceName;
static String nameSpace = "urn:session.impl.shop.examples";
public static void main(String[] args) throws Exception {
URL wsdlLocation =
new URL(serviceEndpointAddress + "/" + portType + "?WSDL");
QName serviceNameQ = new QName(nameSpace, serviceName);
// dynamic service usage
Service service = Service.create(wsdlLocation, serviceNameQ);
PricerBean pricerPort = service.getPort(PricerBean.class);
String user = "Gerald";
System.out.println("Tax rate: " + pricerPort.getTaxRate());
System.out.println("Discount for : " + user + " is " +
pricerPort.getPersonalDiscountRate(user));
System.out.println("Discount for 1 item (at $1000,- per piece) for " +
user + " is " +
pricerPort.getDiscount(1, 1000, user));
System.out.println("Discount for 5 items (at $1000,- per piece) for " +
user + " is " +
pricerPort.getDiscount(5, 5000, user));
Thank you.

I have Oracle JDeveloper Studio Edition Version 10.1.3.2.0.4066.
Please note I have already added following libaries, jars to Tool->Project Properties->Libraries in JDeveloper.
EJB3.0, TopLink Essentials JPA, J2EE, Jws-api.jar, Ejb30.jar, JSP Runtime, JAX-RPC Client, TopLink, JDeveloper Runtime, Embedded OC4J client, Jaxrpc-api.jar, Wsserver.jar
Thank you.

Difference between party and service without party

Hi all,
Please tell me the difference between Service and Service without party and also let me know what is Business system, Business service and Integration process.
regards,
sudha

Hi Sudha
Party
Party is used to represent a Business Partner (doesnt belong to the current landscape) which is defined in B2B Scenarios.So All the systems/services accociated with the Party are referred only as Services.
Service without Party
It is used to represent any service within the landscape and is used in A2A communication.
Check the Threads for reference...
Party & Service without Party
Diff b/w Party & Service w/o Party in Integration Directory?
Differenz between services to use
Party and Service without party
Use-Case for Business Services (Service Without Party) in SAP XI
Business System
Business system will use only when you defind in SLD to identify your sender or receiver.
Business Service
Business service will use to indetify your sender or reciver if we can't defind in SLD then we need to use the business serivce
Cheers..
Vasu
** Reward Points if found useful **

Party and Service without party

Hi All,
I totally understand the definition of Party and services, but on an application point of view when do we actually go in for party and when do we go in for service w/o party??? I feel the diff. is minute but there should be an industry std. and I would like to follow it...
My scenario is Idoc communicating to HTTP using XI 3.0..
Thanks,
Teresa

Hi Teresa,
this is more or less a question of organizing your scenarios. Until now I could not experience any difference between "Party" and "Service w/o Party". We use "Service w/o Party" in all internal scenarios, meaning that no external partner is involved. If it comes to a scenario where we need to communicate with external partners then we place it under "Party". That's all about it. I also asked this question on the XI 3.0 education and the answer was the same....
Brgds
/Michael

Service with party and service without party

Hi all,
Can any body please suggest me when do we choose service with party and service without party?
We have a scenario where i need to use the webservices provided by the third party Java Based system. i am sure that i need to define Business service as technical details of the system are not available in the SLD. Please do correct me as i am configuring this scenario for the first time.
Any links related to a Web Blog / Thread would be great.
Thanks and best regards,
Kulwant Singh

hi
1.we go for service without party when we are having A2A communication.
A2A means application to application communication, it is used when two systems in same landscape try to communicate with each other. Systems in same landscape means both the systems are belongs to same organization or a company.
Normally in A2A communication sender and receiver is inside one organization and developer have freedom to define communication rules .
refers to link
http://help.sap.com/saphelp_nw04s/helpdata/en/66/58934257a5c96ae10000000a155106/content.htm
2.we go for service withparty when we are having B2B communication
B2B means Business to Business communication .It is used when there is exchange of information between two different Parties or companies or landscape.
When two applications in different companies communicates with each other we call it B2B Communication.
in case of B2B every party has it own rules which must be followed if we want to communicate between different organization.
refers to link
http://help.sap.com/saphelp_erp2004/helpdata/en/ca/efb540efe68631e10000000a1550b0/content.htm
rewardspoints if helpful
BR
Kasturika
Edited by: Kasturika Phukan on Feb 12, 2008 6:06 AM

Party and Service not found

Similar Messages

Maybe you are looking for