Party or Service  by using different customer ?

I will do the following scenario:
At first I will receive ORDERS05 (by file-adapter) from 3 customers. After the receiving, I will send a response ORDRSP (by file-adapter) to these customers. But the receiver adapters will be different.
My suggestion is to use “party” instead of “service”. I will configure 3 different parties:
Customer1 
Customer2
Customer3
For Customer1 I defined a “business-service” with an communication channel “file_receiver”
My problem is now to configure the identifiers for the party “customer1” and the identifiers in the communication channel (agency/ scheme…..)
The Guide “How To Sample IDoc-XI Scenarios” describes only the way coming from an external system and sending an IDoc into an SAP system.
Please help
Best Regards
Christophn

In oracle documentation there is this chapter on Data Services, hope this helps.
http://docs.oracle.com/cd/E14571_01/integrate.1111/e12643/data_services.htm#BABDJAEE
Regards,
Harris

Similar Messages

  • Error message: The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, qu

    Hello all,
    I can't open a PP project without this error message appearing:
    "The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, quit the application without saving the project, reinstall any third-party components that are required and reopen the project".
    What I had been doing before this occurred was editing a PP project using ProRes sequences and multi-camera editing. Multi-camera was not working very well and after a few attempts to fix that I gave up and finished the job cutting 3 layers of video instead. AME refused to render the three finished sequences of over 1hr duration so rendered final videos from the PP sequences.
    I tried deleting plists for AME, PP and QT, repairing disc permissions and rebooting but there was no improvement.
    Client is satisfied for now but will want to come back to this job at a later date so decided to uninstall and re-install AME and PP in the hope both would be ready to work properly when needed again. AME works fine in conjunction with a different PP project but now I can't open the PP project in question without the above error message appearing.
    Having searched the net it would seem that the problem may be caused by ProRes but I haven't been able to find a definitive solution for the problem. Does anyone know either:
    1. How to fix this?
    2. If I chose the "modified using a custom sequence setting", can I be sure that my sequences will look the same even if they don't use ProRes? The final deliverable format will be mp4 so as long as the overall look doesn't change then I can  afford a change in the edit codec. It's just that with three sequences over an hour long, I don't want days of work to be ruined.
    Other older PP projects of mine open and work fine.
    Premiere Pro CC 8.2.0
    Media Encoder CC 8.2.0.54
    OSX 10.10.2
    Any help would be greatly appreciated.
    Duncan.

    Adobe web chat come up with a solution.
    Open the PP project.
    Export your sequence or project as a Final Cut Pro XML file.
    Set up a new PP project.
    Import the Final Cut Pro XML file.
    This will get you back up an running.
    Since getting back to editing this project I have found that some things will be lost or change in using XML:
    You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
    You will keep cut points, crop fx.
    Not perfect but only took a couple of hours to save 3 days work.

  • Can i use same customer master record in different sales area

    dear sir,
    i have created a record of customer master - RAM in sold to party account group using sales area - (I).
    (i.e,) XYZ ( sales org ) - A (dis channel ) - XX ( division)
    now i have created another record of customer master - DAVID in sold to party acc group using sales area - (II).
    (i.e) XYZ (sales org) - A (dis channel ) - YY ( division ).
    when i am trying to change SH party function of "RAM" with "DAVID" its throwing an error message that DAVID is not created in Sales Area - (I).
    please let me know how to resolve this
    regards
    vivek

    Hi,
    There are two solution to control this.
    1) Extend customers in respective sales area. i.e.. DAVID in XYZ-A-XX or RAM in XYZ-A-YY.
    2) Define reference sales organisation, channel and division and assign to respective.
    EX.      
    Define sales org. "0000" and assign to all sales orgs.
    Define channel "00" and assign to all channels.
    Define division "00" and assign to all divisions.
    Now create customer masters only in sales area 0000-00-00 and you can use this customer anywhere for any sales area (at transactional level). This is one time activity and will save so much time in creating(or extending) master records in different sales area.
    Thanks,
    Tarpan

  • Custom wcf service that uses SharePoint Object Model.

    Hi All,
    I am writing a custom service on SharePoint. I have noticed most of the people do deploy the custom wcf service in layout folder in 12/14/15 hive. I am wondering is it mandatory? Can’t we deploy the custom wcf service that uses SharePoint Object Model as
    virtual directory on a specific port?
    Regards Restless Spirit

    It is suggested to use WCF in 12/14/15 hive folder due to security and eas in use. Check below
    http://www.dotnetcurry.com/showarticle.aspx?ID=760
    http://msdn.microsoft.com/en-us/library/office/ff521584%28v=office.14%29.aspx
    http://stackoverflow.com/questions/16008593/where-should-custom-wcf-service-for-sharepoint-2010-resides
    If you want to use the server object model you have to host your WCF service on the same server as your SharePoint is installed on.
    If the WCF service has to be on a different server you can use the client object model or the SharePoint webservices to communicate to SharePoint.
    (link to a question about using server object model on different server
    http://nikpatel.net/2012/02/29/step-by-step-building-custom-wcf-services-hosted-in-sharepoint-part-i/

  • I can not re install Adobe Acrobat 7.0 professional on my computer.  It is saying a qualifying product is not detected. I cant even get through using the customer service line they provide 800-272-3623.  This is the worst interactionI have ever had with a

    i can not re install Adobe Acrobat 7.0 professional on my computer.  It is saying a qualifying product is not detected. I cant even get through using the customer service line they provide 800-272-3623.  This is the worst interactionI have ever had with a company.

    Hi joej49728017,
    I am so sorry for the inconvenience caused. However this is just because Adobe Acrobat 7.0 is an outdated version & the now the activation server for it does not exist.
    Please refer to the following KB doc.  Error: "Activation Server Unavailable" | CS2, Acrobat 7, Audition 3
    The above link will help you to  install a special version that does not require activation.
    In case you further need any help, please let us know. We will be more than happy to help you.
    Regards,
    Aadesh

  • Problem in customer address while creating service notification using IW51

    Hi Experts,
    I am trying to create a BDC recording for creating Service Notification using transaction IW51. I have done the recording as follows. On the First screen I am entering notification type. Then on the next screen I am entering the Sold to party  and its address by clicking on the icon besides it. After that i enter Functional location, equipment, priority and req end date and save it.  When I am running this recording after transferring it to a progam , somehow the address disappears for the newly created notification. I am not able to figure out the reason. Kindly guide me.
    Thanks,
    Sonal

    I assume you have tried this with update mode = 'A'-all and watched it actually work correctly?  May I ask why the BDC instead of BAPI?  Is it because you're creating a new partner?  If so, are you pressing save on that partner creation?

  • Custom ClassLoader - trying to use different version of SNMP library than WebLogic Server 8.1 uses

    Problem: my J2EE ear file uses the AdventNet third-party library to do
    SNMP work. WebLogic Server 8.1 also uses this AdventNet third-party
    library to do its own SNMP work. The problem is the version used by
    WebLogic 8.1 is older than the version I use, so my code tries to run
    and finds the wrong version of the library that WebLogic 8.1 has supplied.
    Possible solution: I plan to have a custom classloader (derived from
    java.lang.ClassLoader) that gets hooked in to my threads using
    Thread.setContextClassLoader(). This custom classloader would look for
    the AdventNet library jars in a spot I specify so it would find the
    correct ones. Since I want to change the usual classloader behavior of
    "look in parent classloaders first, then child classloader" to "look in
    child classloader first, then in parent classloaders" I can't just
    override ClassLoader.findClass(). I, at a minimum, have to override
    ClassLoader.loadClass() to look in my classloader first. I have
    questions about this:
    1. What other methods do I have to override? For example, which of the
    resource-related methods do I need to override so that resources are
    searched for first in my classloader then in parent classloaders?
    2. I was thinking of using a URLClassLoader as a helper to my
    classloader, invoking its method(s) from my custom classloader's
    method(s) to actually load the classes from URLs that are not on the
    standard classpath. I was planning to set it up with a custom parent
    classloader that can't find anything, so that the helper URLClassLoader
    would only ever find classes/resources in the URLs I provide to it. Does
    this approach make sense? Have you seen anything like this done before?
    3. Is there any way around this problem besides a custom ClassLoader? A
    buggy custom ClassLoader would have problems which AFAIK would be
    difficult to track down as ClassLoader problems.
    Thanks in advance for any help you can provide.

    Alvin wrote:
    Hi,
    I am experiencing the same problme and
    even I tried to put the AdventNet jar files
    before weblogic.jar I still cannot get it
    to work
    Would you help me out here.
    Thanks,
    -AlvinI finally figured out a way to do it using a custom classloader that
    looked in the directory where I kept the version of AdventNet I wanted
    before looking in the normal places classloaders look.
    How it works is I hook two classloaders at the bottom of the chain of
    classloaders. My custom BlockingClassLoader is hooked as a child of the
    normal chain of classloaders, then a URLClassLoader is hooked under
    that. The BlockingClassLoader's findClass method checks if the class
    starts with a package prefix I want to control (like "com.adventnet.").
    If it does, then it acts like it can't find the class. This makes its
    child, the URLClassLoader, try to find the class. The URLClassLoader
    is given the URL of places to look for classes that match the directory
    I keep the version of AdventNet I want in. When I load a class, I
    directly tell the URLClassLoader to load it so that it is loaded as I want.
    There's more to it than this. I had to override some other methods in
    my BlockingClassLoader and do some other stuff. I'm not sure if I can
    share the source code, as it was developed on company time and thus is
    owned by the company. Feel free to ask questions though.
    I haven't tried this solution very long (basically just unit tested it)
    but it looks promising.

  • Service Accounts used in Different OSB Projects

    Hi,
    In the project I'm working on, we need to have a service account used by different OSB projects. We are using fn-bea:lookupBasicCredentials to lookup the service account. The problem is, the same service account may be under different paths in the different environments we have. Is there a way to use something like a relative path to refer to this service account so we don't have to worry about the environment our code is deployed?
    Thanks in advance

    Please refer -
    How to get ip number in WSDL instead of host name?
    Why do you want to have IP instead of host name?
    Regards,
    Anuj

  • SPA IP Phone - * (Star Key) not working using 3rd party conference service

    Hi - I have an SPA 504G  with SIP service and use a third party conference service to host conference call.  The 3rd party service requires me to log in as the Leader and to do this I have to press the * key.  This doesn't work possibly becuse * has been configured as a short action code.
    Does anyone know of a way to disable short codes (*) whilst a call is in progress?
    Thanks

    This doesn't work possibly becuse * has been configured as a short action code.
    Then deconfiguration of such action codes and/or relevant supplemental services should solve your problem.
    It may help you to know that I have no problem using * against remote IVR with the following configuration (SPA508G with firmware 7.5.4):
    Vertical Service Activation Codes
    Call Return Code:   
    Blind Transfer Code:   
    Call Back Act Code:   
    *4
    Call Back Deact Code:   
    #4
    Cfwd All Act Code:   
    *21
    Cfwd All Deact Code:   
    #21
    Cfwd Busy Act Code:   
    *67
    Cfwd Busy Deact Code:   
    #67
    Cfwd No Ans Act Code:   
    *61
    Cfwd No Ans Deact Code:   
    #61
    CW Act Code:   
    CW Deact Code:   
    CW Per Call Act Code:   
    CW Per Call Deact Code:   
    Block CID Act Code:   
    Block CID Deact Code:   
    Block CID Per Call Act Code:   
    Block CID Per Call Deact Code:   
    Block ANC Act Code:   
    Block ANC Deact Code:   
    DND Act Code:   
    *85
    DND Deact Code:   
    #85
    Secure All Call Act Code:   
    Secure No Call Act Code:   
    Secure One Call Act Code:   
    Secure One Call Deact Code:   
    Paging Code:   
    Call Park Code:   
    Call Pickup Code:   
    *1
    Call UnPark Code:   
    Group Call Pickup Code:   
    *1
    Media Loopback Code:   
    Referral Services Codes:    
    Feature Dial Services Codes:    
    *61*`c`|*21*`c`
    Supplementary Services
    Conference Serv:   
    yes\r no
    Attn Transfer Serv:   
    yes\r no
    Blind Transfer Serv:   
    yes\r no
    DND Serv:   
    yes\r no
    Block ANC Serv:   
    yes\r no
    Call Back Serv:   
    yes\r no
    Block CID Serv:   
    yes\r no
    Secure Call Serv:   
    yes\r no
    Cfwd All Serv:   
    yes\r no
    Cfwd Busy Serv:   
    yes\r no
    Cfwd No Ans Serv:   
    yes\r no
    Paging Serv:   
    yes\r no
    Call Park Serv:   
    yes\r no
    Call Pick Up Serv:   
    yes\r no
    ACD Login Serv:   
    yes\r no
    Group Call Pick Up Serv:   
    yes\r no
    ACD Ext:   
    1234
    Service Annc Serv:   
    yes\r no

  • I have paid full membership 3 days ago but when i tried to open AI, PS and ID it still prompt me to enter serial no. I have talked to like 3 different customer service but still no solution and they kept asking me to wait. Someone told me to alter the hos

    I have paid full membership 3 days ago but when i tried to open AI, PS and ID it still prompt me to enter serial no. I have talked to like 3 different customer service but still no solution and they kept asking me to wait. Someone told me to alter the hosts file from the forum but I don't see any hosts file from adobe, how do i alter the hosts file then? Why should I pay so much just for this kind of service? Please someone help.

    I will tell you honestly. I have tried almost everything to fix the issues. I even tried to call Adobe Technical Support so I can fix the activation issue but no answer after waiting for about an hour on the line. I ask the chat but they just kept saying wait for another 24 hrs it should be updated now it has been about 4 days and no changes. I am extremely frustrated to cause I need to work on my computer. So where can I get help? they prompt me to here btw, many many times.

  • How different Web Services can use a class which parses an XML file

    I am using RAD6.1 for developing and deploying web services.As I am using 15 web Services which uses a common class which is used to parse an XML file.As this XML file should be parsed only once and should be used by all the web services.I have made this common class as Singleton but it works as singleton for only one webservice and for other web service again it is parsing the xml file.I want to parse this xml file only once and used by all the web services.In my case tis file is parsed 15 times for 15 web services, but it should be parse donly once and used by all 15 services.Please give me the solution.
    Thanks and Regards
    Sayeeduzzaman

    Hello,
    the 15 Webservices should have a static attribute which contains the xml:
    private static String xml;
    then initialise the xml like this:
    if (xml == null)
    xml = parseIt();
    else
    //do nothing, XML already initialised!
    }

  • Absolutely the WORST customer service!!! Customer disservice is more Absolutely the WORST customer service!!! Customer disservice is more appropriate! Bring back support to the U.S.!! Bring back support to the U.S.!

    Absolutely the WORST customer service!!! Customer disservice is more appropriate! Bring back support to the U.S.!

    Hi richmc. I will only deal with the last part of your message.
    You say that you want to use Outlook 2007 to collect your mail. That is not a problem, it is just an email client. BT do not supply this email client. Microsoft do.
    You cannot expect BT to be able to assist customers with all the different email clients available to use. You can get the server details etc to set it up yourself.
    Most ISP's are the same on support issues for things that they do not supply.
    BT do have a paid support service if you did want to use it but for things like email setup it should not be needed.
    You also say that you have your own domain names. These NEED to be hosted somewhere to be able to use them for email.
    I don't believe that BT do hosting anymore(Could be wrong). So you would need to get in touch with a hosting company, someone like Nethosting, 1&1, GoDaddy etc to set up an email hosting account and then set up your email client to your hosting companies email servers.
    toekneem
    http://www.no2nuisancecalls.net
    (EASBF)

  • How to use different (not local) user for NTLM auth in Authenticator?

    Hi All,
    I use custom authenticator to provide user / passwords to connect to .NET Web Services. I overloaded function getPasswordAuthentication() that returns right user / password combination for the requested URL. It all works perfectly for many kinds of HTTP connections: basic, ntlm, ntlm-v2, through proxy, ssl, etc.
    My problem is that during NTLM authentication from Windows computers JVM uses credentials of the currently logged in domain user instead of calling Authenticator to get other user / password provided by the user. In case when local user credentials fail to authenticate, JVM calls my Authenticator but in case authentication is successful it does uses local domain user and never calls my Authenticator. The issue is when this local domain user does not have enough permissions but authenticated correctly there is no way to supply JVM with another user to begin with.
    What can I do to force JVM to ignore local domain user and to use Authenticator to collect credentials during NTLM authentication requested by the server in case the software runs on a Windows box with currently logged in domain user?
    I am looking for the answer for a long time already but found only questions and suggestions to switch server from NTLM authentication which is not an option for me. From the developer's view it has to be pretty simple change for Sun to do in Java networking API. Is there any way to escalate it to Sun support? Maybe there is some property in some JRE patch level that allows to do this?
    Thank you very much!
    Mark

    Thank you for the reply. I have kind of an opposite problem. I can perfectly connect from Linux computers to Microsoft IIS servers using NTLM or even NTLMv2 authentication. My problem is connecting from Windows client computer joined to the same domain as IIS server with the domain user logged in to this computer. In this case this user account will be used in any HTTP connections I initiate to this IIS server instead of the one that I want to supply in my custom Authenticator.
    I have graphical interactive application that connects to IIS Server. When user runs it and connects to IIS server I want to prompt for the user/password regardless whether JRE may correctly authenticate using current user account credentials. The current user may not have enough permissions in IIS application so I want to use different user to login to IIS application.
    Thank you anyway,
    Mark

  • Service with party and service without party

    Hi all,
    Can any body please suggest me when do we choose service with party and service without party?
    We have a scenario where i need to use the webservices provided by the third party Java Based system. i am sure that i need to define Business service as technical details of the system are not available in the SLD. Please do correct me as i am configuring this scenario for the first time.
    Any links related to a Web Blog / Thread would be great.
    Thanks and best regards,
    Kulwant Singh

    hi
    1.we go for service without party when we are having A2A communication.
    A2A means application to application communication, it is used when two systems in same landscape try to communicate with each other. Systems in same landscape means both the systems are belongs to same organization or a company.
    Normally in A2A communication sender and receiver is inside one organization and developer have freedom to define communication rules .
    refers to link
    http://help.sap.com/saphelp_nw04s/helpdata/en/66/58934257a5c96ae10000000a155106/content.htm
    2.we go for service withparty when we are having B2B communication
    B2B means Business to Business  communication .It is used when there is exchange of information between two different Parties or companies or landscape.
    When two applications in different companies communicates with each other we call it  B2B Communication.
    in case of B2B every party has it own rules which must be followed if we want to communicate between different organization. 
    refers to link
    http://help.sap.com/saphelp_erp2004/helpdata/en/ca/efb540efe68631e10000000a1550b0/content.htm
    rewardspoints if helpful
    BR
    Kasturika
    Edited by: Kasturika Phukan on Feb 12, 2008 6:06 AM

  • E-Recruitment Third Party Internet Service provider

    Hi Experts
    I am implementing e-Recruitment 3.0 at one of client site. Here we are looking out for integration with the third party internet service provider i.e. job sites. Wherein we will able to surf and search external job  site for the suitable resume based on the requirement. These requiremnts are defined in e-Recruitment thru Requisition.
    Based on the requisition, we will be search the resume and upload the same into e-Recruitment.
    In normal e-Recruitment their is no node for integration with the external service provider.
    I am not getting the proper trigger to reach the integration part.
    Has anybody done this...?? If yes how did you do it..??
    Regards,
    Anand

    hello anand,
    let us take this step by steb ok :
    1. in e-rec 3 there is no functionality for integration with 3rd party service provider.
    2. there is a new role for teh above in ERP2005/ecc6...but I think this role is more for a headhunter to supply resumes of candidates online to your organisation
    3. coming to your requirement, if you have enterprise portal I suggest that :
    a. get the external service provider's link on to ure portal content (an MOU kinda doc needs to be signed between the 2 parties)
    b. then the requestor can search cv's based on the requirement (this still does not solve the issue of integration between your requirements-in-requisition and the content of the service provider)here u have to remember that trex is solely for your e-rec instance only and and cannot be used to ''search'' a service providers content unless the content is already in your e-rec system, which can be achieved by point-c below.
    c.in e-rec 3, the alternative I have found was modifying the external candidate bsp page to remove all links except the part where ther profile is uploaded, and creating a unique identifier for all such headhunters to identify the resumes from each of them respectively, and allow access to the custom page thru internet. This worked fine for me,... but a lot still depends on ure client's requirements.
    hope the above works for you,.. in any case let me know how u solved the situation
    ciao
    ganti.

Maybe you are looking for