Pass code unlock option no long available on my Iphone4

Please help.  I can no longer see the pass code unlock option on my Iphone4.  Although I realize the importance of security, this feature can become a nuisance when you have to continuously type in the pass code.  I do not have Microsoft Exchange or is it tied into corporate email.  My Iphone is for personal use only.  This is extremely frustrated when driving and you need to type in the pass code in order to reach the phone pad.  I am on version 4.3.5.  With the focus on driving and texting, I am surprised Apple would run the risk of forcing someone to type a password while driving.  Thank you.

Thank so much for the quick response.  Took your advice and everything appears to be working!!!

Similar Messages

  • Why pass code lock option has disabled in iOS 7.0.4

    Why pass code lock option has disabled in iOS 7.0.4

    Hi there ssiva141,
    You may find the information in the article below helpful.
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    -Griff W. 

  • Updated CC 2014  AME to version 2014.2 - CUDA Renderer Option No Longer Available?

    Hi,
    I just updated my AME CC application to version 2014.2 and the 'Renderer' option to allow use of the GPU CUDA cores is no longer available. Is related to the udpate? Or does the renderer option "Mercury Playback Engine GPU Acceleration (Open CL)" now automatically engage CUDA if present given the GPU? These used to be two separate Renderer options.
    My GPU is a NVIDIA GeForce GTX 680MX 2048 MB on an iMac running OS 10.10.1.
    Thanks,
    Lindsay

    I have determined this issue is related to the NVIDIA driver (I think) and my upgrade from Maverick OS to Yosemite 10.10.1.
    When I opened After Effects I was warned that CUDA was not available which led me to the latter discovery. I located the correct driver on the NVIDIA website, downloaded and attempted to install, but received this message from the driver installation package:
    " Computer not supported. This computer is not compatible with the NVIDIA Web Driver"
    I realize this may now be beyond the scope of this forum, but has anyone else encountered this issue with the their Adobe Cloud production software and a Mac platform running Yosemite, equipped with an NVIDIA GeForce GTX 680 MX 2048 MB GPU?
    Thanks!

  • Illustrator's Image Trace custom options no longer available.

    I am running Illustrator CS6 on Mac OS 10.7.5.  The custom option in Image Trace is no longer available, greyed out. Does anyone know what would cause this? I have not updated anything software-wise in a while, it just suddenly became unavailable. I need troubleshooting suggestions. Thanks.

    This is the Scripting forum. Does your question relate to Scripting or are you working in the desktop app. If the desktop, the is the image you want to trace selected?

  • Boot from CD-Rom option no longer available when I press F9 on the Startup Menu

    After bringing up the options menu after pressing the Esc Key, when I press F9 there is no longer an option to boot from the CD-ROM showing in the list.
    Also when I use the System Recovery option and select the option to Boot the Laptop using the Internal CD-ROM, after the Laptop has restarted a message appears basically saying the selected boot option is not available and I have no idea what the problem is.

    Hi @John-Davis ,
    I saw your post regarding the option to boot from CD no longer being an option in your BIOS. I will be happy to help. Let's start with testing the DVD/CD ROM or optical drive. This HP document Testing for Hardware Failures will show you how to access the UEFI tools that come as part of your initial setup. Under Components Tests there will be a one for the Optical Drive. Run that to see if the optical drive has failed.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • I cannot sync photos to iphone 5 or iPad , since updating to new iPhoto and aperture option no longer available

    i cannot sync photos to iphone 5 or iPad , since updating to new iPhoto and
    Aperture Sync option no longer available

    Sorry for lack of info
    i usually sync photos from Aperture on MacBook Pro to iPhone 5 and iPad
    using iTunes (all latest updates) . Sync worked perfectly
    but
    since last update of OS X and migration from aperture to new "PHOTOS"
    icloud turned off, sync won't put any photos onto devices
    I have restored both devices , leaving sync photos option off(to delete any previous photos)
    then try to sync photos and nothing happens
    i I can sync folders       but that isn't how I want it??
    hope this is a little clearer

  • Create Group Tree option no longer available in report designer

    I am currently using Crystal Reports 2008 report designer to create reports which are embedded in our application.  We deploy a run time version of Crystal within our application.  In previous versions there was a report setting in the report designer to "Create Group Tree", this appears to no longer be available in Crystal 2008.  My question is... Is there a way to enable this option outside of the report designer?  Is there a setting that I am just missing?  This is causing an issue since I cannot upgrade existing reports to the 2008 version without losing the ability to display the group tree.   thanks

    CR 2008 only has a .NET Report engine now so I moved your post to the .NET SDK forum.
    I kind of recall this may have been and RDC API, there is no RDC in CR 2008 and the Embedded Designer is for use in the Visual Studio .NET IDE for creating reports only. No longer licensed to be used in an application nor can it be distributed. If you were using crpe32.dll it is no longer supported as of CR 9.
    Search here also, lots of posts on various how to's.
    Thank you
    Don

  • Sorensen option no longer available?

    I am using I movie4, and as of today... I no longer have the sorensen video options available to me on the compression options in expert mode when "sharing" (exporting) a movie. What happened? Could this have been caused by updating quicktime? I have used many times before and now it has just disappeared.... Any help will be greatly appreciated. Thanx.

    Interesting...
    Sorensen is listed in the right sidebar, but not under "Export formats".
    http://www.apple.com/quicktime/pro/specs.html
    I don't have Sorensen either.

  • OSX 10.7.4 Lightroom 4.1 upgrade: Revel export option no longer available...

    after a lightroom 4.1 upgrade on my Mac OSX 10.7.4, the revel export no longer displays.  although, i can attempt to reauthorize the account the option for revel remains unavailable (see screenshot):
    i've attempted to reinstall the 4.1 upgrade, but the issue persists.  please advise...

    Revel is a Publish Service plug-in, not an Export plug-in.....so I wouldn't expect to find it in the Export dialog. It's down in the Publish Services at the bottom of the left-hand panel in the Library Module.

  • ITunes in the Cloud option no longer available in iTunes 12

    I upgraded to Yosemite about a week ago, and I am now running iTunes 12.0.1.26.  I use my MacBook Air to stream iTunes movie and TV show purchases to my TV, and I like having the option of streaming content directly from the cloud rather than downloading it to my computer's hard drive.  Normally, after every iTunes upgrade since the introduction of "iTunes in the Cloud," I have to go to the iTunes preferences menu to enable the "iTunes in the Cloud" setting to see my purchases that are available to stream. (I don't know why Apple doesn't enable this by default. Improvement opportunity!)  However, in iTunes 12, this setting is not available.  Has the "iTunes in the Cloud" setting been moved somewhere else?  I sure hope this feature hasn't been abandoned.
    I have signed out of iTunes, deauthorized my computer, turned off iTunes match, and genius, then signed back into everything, but that hasn't helped.
    Any guidance would be much appreciated.
    I have a 13" mid-2011 MacBook Air with a Core i7 and 4GB of RAM running OS 10.10.

    Do you see anything at all on the purchased page, headings links, tools etc.

  • Save As option no longer available

    Windows 7 system recently updated to skype 7. Now when someone sends me a file it automatically downloads and I no longer have the "save as" option to save to a new location. I uninstalled and downgraded to 6.18 but the option is still missing.
    Any idea how to get this option back. Real pain for organizing files sent.
    Help!!!
    Wayne

    Make sure that the option to Automatically accept incoming files is not selected?
    http://community.skype.com/t5/Windows-desktop-clie​nt/Got-a-problem-when-download-some-files-from-Sk...
    Also, be aware that regardless the selected options, image files will be auto-saved in the \media_cache folder.
    http://community.skype.com/t5/Windows-desktop-clie​nt/Skype-7-Issue-regarding-sending-Photos/m-p/381...

  • Unable to Enable Intel VT-x Via BIOS Setup: (Option no-longer Available?)

    I have been using VMWare Workstation (V9.0.4) with my present motherboard for about 1 year.  For no apparent reason, I can no-longer do so, because "Intel VT-x" is not enabled.  When I enter the BIOS setup, the option that used to be there to enable "Intel VT-x" is no-longer present.  I am wondering if the latest BOIS Version (H.90) is the culprit?    If it is, is there a way to "roll back" to the previous BIOS version?
    Motherboard BIOS Version: H.90 (Motherboard:  X79A-GD45 Plus).  Windows 8.1 (64-bit)

    @Svet:  I checked and have (embarrassingly) found the problem.  I was unable to scroll down in the BIOS settings menu for Overclocking, and therefore could not "see" the option I was looking for.  I adjusted the sensitivity of my mouse(?) and all of a sudden all is well.  I found the option concerned and enabled it (how it had become disabled after nearly 1 year, I do not know) and all is now as it has been for a year.  Weird!
    Many thanks for your willingness to assist, and sorry for wasting your time.  Cheers.
    (Is there a way to mark this issue as "Solved" as in some other forums?)

  • Yahoo Contacts option no longer available after latest update

    I just updated to iTunes 10.7.0.21 and when I went to synch my contacts the option for yahoo contacts has disappeared. Does anyone know what happened? I am using iPhone 3gs and windows 7 64.

    Go to Edit > Preferences > Site.
    Is the Dependant Files option selected?   x Prompt on put/check in.
    As an FYI, this is a user-to-user forum.  If you want to file a bug report that Adobe Technical Engineers will see, go to the link below.  Give as many details as you can about your OS, software version, etc... so they can re-produce the problem at their end.
    Bug Report
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • HT2534 Why is the "None" option no longer available?

    Why can I no longer enter the iTunes store without a credit card?  My company has purchased 15 to 20 iPads and we were originally able to download free apps through our MDM without needing to enter a credit card on each device iTunes account.  Now all the sudden we need credit card information?

    Hello FowlerServices,
    Thanks for using Apple Support Communities.
    The following article explains why you are getting prompted to enter payment information for the Apple ID.
    Why can’t I select None when I edit my payment information?
    http://support.apple.com/kb/TS5366
    Take care,
    Alex H.

  • Catalyst Control center options no longer available

    My desktop is an HP Envy h8-1534. It is currently connected to an HDTV. 
    I just attempted to load the catalyst control center to tweak my graphic settings and find that none of the normal settings are available. I'm unable to so much as change my resolution, let alone anything more advanced. I'm not exactly sure when this happend as I don't go into those settings all that often. However, if I had to guess, I would put the blame on upgrading to windows 8.1 a couple weeks ago. 
    I'm not sure what to do now but it is kind of infuriating! I have several game I'd like to run that only work in 16 bit color mode and I have no way of changing that now. 

    Hi,
    Install the latest AMD driver update that is listed under Windows 8.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

Maybe you are looking for

  • Best option for best display without DVD

    I've been reading all the b/g threads as research... I have a 1920x1080 project timeline, 23 mins total time. Source material 1080i mixed with some other soure material. I export as Quicktime Conversion, choose NTSC 720x480 16:9 (853x480) to burn to

  • T410 - Keyboard problems after Windows 8.1 upgrade

    Hi to all! Recently i'm facing huge problems with the keyboard of my T410. The Laptop shuts down when I press "Alt Gr", if I press shutdown - the screen spins several times before shutting down, if I use the arrow-keys the screen also flips, the norm

  • Jdk1.5

    i'm preparing for scjp5 n using jdk1.4.2.will i've to change my jdk environment to jdk5 or it won't create any problem in exam.

  • No IDocs could be sent to BI using RFC.

    We are experiencing this error while loading data from R/3 to BI 7.0. The exact problem is that these Idocs eventually get transferred to BI but at a very very slow rate: For a job that takes 10secs to load, you can have it running for 4hours. How ca

  • Keyboard shortcut for "Help" search menu (CS6)

    Hello, In CS5 I managed to remove all shortcuts overriding the CMD + Shift + 7, thus being able to use that standar shortcut for executing a menu search on Mac OSX. Since switching to CS6 (and importing my keyboard shortcuts from CS5), CMD + Shift +