Pass Descriptive Flexfield Data Requisition/PO Through to GL?

Is it Possible to Pass Descriptive Flexfield Data Requisition/PO Through to GL?
Let's say example Project Number and Work order Number DFFs feilds from Requisition/PO line level to GL.

Pl do not post duplicates - Pass Descriptive Flexfield Data Requisition/PO Through to GL?

Similar Messages

  • Descriptive Flexfield Manual Updation

    Dear All,
    Please tell me, how to update descriptive flexfield data of attribute11 column in oe_order_lines_all, while line has been closed.
    Can we browse the table in toad and update the data manually?
    Regards,
    Jamil

    I don't think that is possible.
    Oracle has the functionality to transfer Req. Distribution DFF to PO Distribution DFF. But it does not work for Req Header or Req Line DFF.
    Hope this helps,
    Sandeep Gandhi

  • The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assi

    Hi ,
    We have enabled context sensitive DFF in Bank Branch Page for HZ_PARTIES DFF , We have created Flex Map so that only bank branch context fields are only displayed in the bank branch page and  as we know party information DFF is shared by supplier and Customer Page so we dint want to see any Bank Branch fields or context information in those pages.
    We have achieved the requirement but when open existing branches bank branch update is throwing below error message :
    "The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assistance."
    this error is thrown only when we open existing branches, if we save existing branch and open then it is not throwing any error message.
    Please let us know reason behind this error message.
    Thanks,
    Mruduala

    You are kidding?  It took me about 3 minutes to scroll down on my tab to get to the triplex button!
    Habe you read the error message? 
    Quote:
    java.sql.SQLSyntaxErrorException: ORA-04098: trigger 'PMS.PROJECT_SEQ' is invalid and failed re-validation
    Check the trigger and it should work again.
    Timo

  • Descriptive Flexfield with date list

    Hi,
    I have created a descriptive flexfield for date input. Is there any value set I can use with a date list or do I have to create my own value set to populate the flexfield?
    Thanks

    Try the FND%DATE% value sets.

  • Descriptive Flexfield transfer from Requisition (iProcurement) to PO

    Can a descriptive flexfield be transferred from iProcurement (requisition lines) to Purchase Order (lines)?
    I am fairly new to Oracle EBS and this is my first attempt to set up descriptive flexfields. We want the user to populate the field while creating the requisition and would like that value to transfer to the purchase order. (we are on 11i)
    Is this possible? Is there an option or setting that I need to be aware of?
    Thank you!

    I don't think that is possible.
    Oracle has the functionality to transfer Req. Distribution DFF to PO Distribution DFF. But it does not work for Req Header or Req Line DFF.
    Hope this helps,
    Sandeep Gandhi

  • How to send PR & PO data for materials through IDOC in XML

    Hi Experts,
    I am looking for a solution to send open PR & open PO related data for diffrent materials through as IDCO in XML file.
    Scenario is i have to show a report in a 3rd party system for open PR & open PR that too will come after selection some materials. That means select a materials & it will show all the open PO & related data in a report.
    The rough idea for the solution i got is I can save the data in XML file in the system. For this i have to send IDOC. but the problem is there is no message type for PR. IF i am not wrong i can extend the MATMAS05 for a segment that will have PR related info.
    Now what to do with that how to send the IDOC do i need to create another report to send IDOC or i can send the extended one through BD10. I tried it but it shows error message "0 communication idoc sent" so I dont no y such error is coming i think i am not filling the extended idoc. But again my QUestion is how to do that. If anyone have any other solution Please help me out of this.
    Regards,
    Nik

    Hi Alpesh,
    Thanks for your reply.
    My requirement is bit different. i have to send Open PR data for diffrent materials. In a 3rd party application user will search for few materials which will generate a report that will show the PR related data for those material.
    Same thing i have to do for PO & Sales order also.
    Can u please help me to provide the solution how can i proceed for it. U have given the Message type & a bapi how it will help in my issue?
    I got a suggesion from someone that extend message type matmas for PR, PO, SD related data & send the idoc. but i am confused how to pass that much data ina single IDOC.
    Regards,
    Nik

  • Creation of Descriptive FlexField on Supplier

    Hello,
    I am trying to add a new segment under context "Global Data Elements" of a DFF.
    Currently this context has two segments referring to columns ATTRIBUTE1 adn ATTRIBUTE2
    In the Segments Summary screen, when I try to select the Descriptive Flexfield column of which I believe it is available (ATTRIBUTE3), I can only select the column "ATTRIBUTE_CATEGORY".
    EBS R12
    application = Purchasing
    title = vendors
    table = PO_VENDORS
    Does anyone has any hints? What am I doing / thinking wrong?
    Thanks

    Attributes might have been used in another DFF. Run the below query to check if other columns are used in another DFF.
    SELECT application_column_name,end_user_column_name,
    ffv.flex_value_set_name,flex_usage.*
    FROM fnd_descr_flex_col_usage_vl flex_usage,
    fnd_descriptive_flexs_vl flex,
    fnd_flex_value_sets ffv
    WHERE flex.descriptive_flexfield_name = flex_usage.descriptive_flexfield_name
    AND flex.application_table_name like 'PO_VENDORS%'
    AND flex_usage.flex_value_set_id = ffv.flex_value_set_id(+)
    Thanks
    Shree

  • Need to pass period start date as parameter to ProjectLOVVO in OTL module

    Hi All,
    I have a requirement of passing period start date as a parameter to ProjectLOVVO.
    It will check against the project's base view PA_ONLINE_PROJECTS_V and allow to
    display only those projects in the list where the project completion date and
    resource assignment end date is greater than the period start date.
    This VO is in Oracle Time and Labour Module. Navigation is SelfService Time> Create Timecard Screen.
    The screen is based on AK Developer.
    I have tried to followed the steps as per the document hxcconfiguiwp.pdf during the development work.
    Steps are mentioned below. It is still not working.
    Please go through the steps and if you have worked in this module please provide your valuable
    suggestion as soon as possible.
    Steps:
    1. Modified the customizable view PA_ONLINE_PROJECTS_V to
    keep the assignment end date in the select query.
    2. Created Custom VO- XXProjectLOVVO using JDeveloper same as ProjectLOVVO
    It's SQL Query is -
    SELECT project_number projectnumber,
    project_name projectname,
    project_details projectdetails,
    project_id projectid,
    start_date,
    completion_date,
    carrying_out_organization_id
    FROM pa_online_projects_v
    WHERE TRUNC(completion_date) >= TRUNC(FND_DATE.CANONICAL_TO_DATE(:1))
    AND TRUNC(assignment_end_date) >= TRUNC(FND_DATE.CANONICAL_TO_DATE(:2))
    3. Placed the class files (XXProjectLOVVO.xml and XXProjectLOVVOImpl.class) in Custom Directory in server.
    In location- apps_st/comn/java/classes/custom/oracle/apps/xxhxc/selfservice/timecard/server
    4. Attached the Custom VO to standard AM- TimecardAM in location-oracle.apps.hxc.selfservice.timecard.server.TimecardAM
    and in LovAM location-oracle.apps.hxc.selfservice.configui.server.LovAM
    5. In AK Developer module created LOV Attributes 'XX_HXC_CUI_PROJECT_CO_ORG_ID', 'XX_HXC_CUI_PROJECT_END_DATE',
    'XX_HXC_CUI_PROJECT_ID','XX_HXC_CUI_PROJECT_NAME',
    'XX_HXC_CUI_PROJECT_NUMBER', 'XX_HXC_CUI_PROJECT_START_DATE'
    and created a LOV region 'XX_HXC_CUI_PROJECT_LOV attached to Database Object 'ICX_PROMPTS' in the Object
    and in Region items added all the above attributes.
    Added LovAM location in place of AM and LovCO lication in place of CO.
    6. Migrated the LOV with the below code
    begin
    hxc_lov_migration.migrate_lov_region
    (p_region_code => 'XX_HXC_CUI_PROJECT_LOV'
    ,p_region_app_short_name => 'HXC'
    ,p_force => 'Y'
    commit;
    end;
    7. Copied hxczzhxclayt0019.ldt LDT file from server. Renamed it to xhxczzhxclayt0019.ldt
    modified the Layout section for ProjectLOV
    BEGIN HXC_LAYOUT_COMPONENTS "Custom Projects Timecard Layout - Project"
    OWNER = "CUSTOM"
    COMPONENT_VALUE = "PROJECT"
    REGION_CODE = "HXC_CUI_TIMECARD"
    REGION_CODE_APP_SHORT_NAME = "HXC"
    ATTRIBUTE_CODE = "HXC_TIMECARD_PROJECT"
    ATTRIBUTE_CODE_APP_SHORT_NAME = "HXC"
    SEQUENCE = "210"
    COMPONENT_DEFINITION = "LOV"
    RENDER_TYPE = "WEB"
    PARENT_COMPONENT =
    "Projects Timecard Layout - Day Scope Building blocks for worker timecard matrix"
    LAST_UPDATE_DATE = "2010/11/10"
    BEGIN HXC_LAYOUT_COMP_QUALIFIERS "Custom Projects Timecard Layout - Project"
    OWNER = "CUSTOM"
    QUALIFIER_ATTRIBUTE_CATEGORY = "LOV"
    QUALIFIER_ATTRIBUTE1 = "XXProjectLOVVO"
    QUALIFIER_ATTRIBUTE2 = "N"
    QUALIFIER_ATTRIBUTE3 = "XX_HXC_CUI_PROJECT_LOV"
    QUALIFIER_ATTRIBUTE4 = "809"
    QUALIFIER_ATTRIBUTE5 = "12"
    QUALIFIER_ATTRIBUTE6 =
    "XxHxcCuiProjectNumber|PROJECT-DISPLAY|CRITERIA|N|XxHxcCuiProjectId|PROJECT|RESULT|N|XxHxcCuiProjectNumber|PROJECT-DISPLAY|RESULT|N"
    QUALIFIER_ATTRIBUTE8 = "ProjectNumber"
    QUALIFIER_ATTRIBUTE9 = "ProjectId#NUMBER"
    QUALIFIER_ATTRIBUTE10 =
    "custom.oracle.apps.xxhxc.selfservice.timecard.server.XXProjectLOVVO"
    QUALIFIER_ATTRIBUTE11 = "TIMECARD_BIND_START_DATE|TIMECARD_BIND_START_DATE"
    QUALIFIER_ATTRIBUTE17 = "OraTableCellText"
    QUALIFIER_ATTRIBUTE20 = "N"
    QUALIFIER_ATTRIBUTE21 = "Y"
    QUALIFIER_ATTRIBUTE22 = "L"
    QUALIFIER_ATTRIBUTE25 = "FLEX"
    QUALIFIER_ATTRIBUTE26 = "PROJECTS"
    QUALIFIER_ATTRIBUTE27 = "Attribute1"
    QUALIFIER_ATTRIBUTE28 = "PROJECT"
    LAST_UPDATE_DATE = "2010/11/10"
    END HXC_LAYOUT_COMP_QUALIFIERS
    END HXC_LAYOUT_COMPONENTS
    8. Used FNDLOAD command to upload the ldt
    FNDLOAD apps/apps@instance 0 Y UPLOAD /ad01/app/o2cdev/apps/apps_st/appl/hxc/12.0.0/patch/115/import/hxclaytlayoutsld.lct ./xhxczzhxclayt0019.ldt
    9. Bounch Apache
    10. Checked in below database table to check weather layout records are getting update or not and found records existing:
    In table hxc_layout_COMPONENTS where region_code = 'HXC_CUI_TIMECARD' and component_value = 'PROJECT' and SEQUENCE = 210
    and COMPONENT_NAME = 'Custom Projects Timecard Layout - Project'
    In table hxc_layout_comp_qualifiers where layout_component_id is as in layout component table.
    11. Checked that the XXProjectLOV is attached in the TimecardAM and LovAM. It is visible there but while quering for the project list its picking up all the projects irrelavant of start date parameter value .
    As if its picking up all the records from seeded LOv- ProjectLOV not custom LOV.
    Regards,
    K Bosu

    Hi
    this steps is wrong
    4. Attached the Custom VO to standard AM- TimecardAM in location-oracle.apps.hxc.selfservice.timecard.server.TimecardAM
    and in LovAM location-oracle.apps.hxc.selfservice.configui.server.LovAMU cant add extended VO direct to standard AM .
    VO extension requires .jpx import ,that u have to do ,rest will be take care by this import itself and no need to modify standard AM .
    Please check the steps for VO extension in http://oracle.anilpassi.com/extend-vo-in-oa-framwork-2.html
    thanks
    Pratap

  • Updating PO Lines Descriptive Flexfield

    We're currently still on R11.5.10.2 and we're customizing the Purchase Orders form by adding an option under the Tools menu to mass update several different fields.  One of the fields happens to be a descriptive flexfield on the PO line.  We're able to update the DFF, but the actual updated value doesn't seem to be reflected/displayed after we perform the update.  If we cursor and tab to the DFF and open it up, it actually has the updated value, but when we close the DFF field, it still displays the old value.  We've tried different calls to see if we can refresh the displaying of DFF, but no luck.  How can we customize to accomplish this in the form?

    It's a straight update to the base table from the PO form.  We're just assigning the values to the DFF (in this case, ATTRIBUTE1) and let the form update the record.  When we assign the value to the ATTRIBUTE1 field, we cannot see this change right away.  If we tab to the DFF, the latest value is there.  And when we tab out of it, the latest value is not being reflected.  In other words, the DFF is not displaying the latest value.  It is only after you save the data that it displays the updated value.   I was hoping that there may be some API related call to DFF that we can make to display the change right away before the data is saved, but I'm not able to get this to work within the form.

  • Descriptive flexfield setup

    Hi, need help and advise.
    I have created a descriptive flexfield for attribute17 column of hz_cust_site_uses_all table with value set 'Yes/No' (LOV type) for validation.
    My problem is how to make the descriptive flexfield to reflect the existing value store in this column as default value as the existing records
    store with 'Y' or 'N' in the table. 
    Regards,
    BE.

    Hi, thanks for respond.
    the value is updated correctly with 'Y' for attribute17 in the table for selected customers via API as the status return from API was 'S' - Success.
    Actually the value set assigned to flexfield is using the 'Yes' and 'No' from the fnd_lookups table and defaulted to 'No' for this flexfield. 
    So, even I have updated with 'Y' in the table but the flexfield is still reflecting the default value 'No' at the form level.
    When setup for the flexfield, the 'Synchronize with Reference Field' is enabled and context code is 'BILL_TO' and 'Global Data Elements'.
    With the same table, I have no problem for attribute12 with the context code 'Global Data Elements'
    but I am having problem for attribute17 with the context code 'BILL_TO'.
    Regards,
    BE.

  • Urgent! Change Descriptive FlexField Prompt

    Hi!
    I need to hide & change prompt for fields that are retrieved from Descriptive FlexField. Personalization need to be done for one responsibility.
    Hiding can be done easly with Segment List.
    Is there any way how I can change prompt for one responsibility.
    BR
    Hugo

    Hugo,
    To my understanding you should not be able to control the Text for various segments without changing the Flexfield definition. And if you do that it gets affected for all responsibilities.
    As a suggestion you can use a Context specific to a responsibility and may be use the same combination of segments for the context. Finally data gets stored in same columns, but since u define the context separately you should be able to provide different name.
    Hope that gives you clues to work on.
    Regards
    Sumit

  • Automatically populate a Descriptive FlexField with Default Value

    I have 2 Descriptive flexfield segments defined, one is "Start Date" using value set "LS_START_DATE" and the other segment is "End Date" using value set "LS_END_DATE".
    Now when I enter the "Start Date", I want the "End Date" to be populated automatically with the value of "Start Date + 365 days".
    For example:
    If I enter "Start Date" = 25-May-2010
    Then "End Date" should be automatically populated with the value "25-May-2011" (i.e., Start Date + 1 year)
    Is that possible ?
    I tried defining "End Date" segment with "Default Type" as "SQL Statement" and Default Value as "SELECT :$FLEX$.Start Date+365 from dual" , but it's not working.
    Can someone please help ?
    Prashanthi

    I did, the value set created for this segment "Start Date" is "LS_START_DATE" and I changed the sql statement in Default Value to "SELECT :$FLEX$.LS_START_DATE+365 from dual" , but still it is not working ....no luck.
    Prashanthi

  • Order Lines Descriptive Flexfield

    We import our orders from an external system. We have many additional attributes to store at the order line level. We have already used all 20 Segments on the Additional Line Information Descriptive Flexfield but we still have more attributes to store.
    Is there somewhere else we can store these values? On another DFF or some other solution.?

    You can create a custom table with the order_line_id as the primary key. And you can store your additional data in columns of this table.
    The data won't be visible in the seeded OE form. You will have to write a custom screen that shows data. It will be very easy to create a ZOOM from the OE screens that opens your custom form to show data for a given order line.
    There are global_attribute fields that are typically used by Oracle for localizations. If you do not have any localizations, you can try using them.
    Hope this answers your question
    Sandeep Gandhi
    Omkar Technologies Inc.
    Independent Techno-functional Consultant
    513-325-9026

  • Define Descriptive Flexfield DB Item

    "Further Medical Assessment Information" is not supported by the "Define Descriptive Flexfield DB Item" application process. Is there a way, through application or API for direct insert into pay_route_to_descr_flexs table, to enable it?
    Appreciate a detailed answer.
    Thanks

    It seems that am I having a unique requirements!.

  • How to disable programmatically an item in a Descriptive flexfield

    Hi friends,
    doy you know How to disable programmatically an item in a Descriptive flexfield using CUSTOM.pll?
    The problem is that I need to do it under the WHEN-NEW-RECORD-INSTANCE event, and the item (based in an attribute column of a database table) hasn't a canvas asociated at that moment....
    Do you have any example?
    Thanks,
    Jose.

    Hi Prashant,
    mmm yes, for now there are two fields it he DFF window.. but in a future .. may be more..
    I've found a function:
    fnd_flex_key_api.enable_column that may be properly for that, but I don't know what to pass in the the first parameter (flexfield IN flexfield_type)...
    I mean: I suppose is the "name" for my DFF but.. how can I get it?
    Thanks,
    jose.

Maybe you are looking for