Pass parameter from Bean to AM Impl

All,
I am invoking the AM Impl custom method from the backing bean like this
BindingContainer bc = BindingContext.getCurrent().getCurrentBindingsEntry();
OperationBinding ob = bc.getOperationBinding(methodName);However my method accepts 3 parameters (Long, Long, String).
How do i pass the parameters from the bean (View) to AM Impl (Model)
thnks
Jdev 11.1.1.5

BindingContainer bc = BindingContext.getCurrent().getCurrentBindingsEntry();
OperationBinding op = bc.getOperationBinding(methodName);
op.getParamsMap().put("firstParam",value1);
op.getParamsMap().put("secondParam",value2);
op.getParamsMap().put("thirdParam",value3);

Similar Messages

How to pass parameter from 1 stored procedure to another stored procedure inside crystal report

Hi
I have several stored procedure in my Crystal Report. I am wondering if it is possible for me to pass a parameter to one of the stored procedure and to use the result of that stored procedure E.g. CustomerCode. To another 2 stored procedure to generate the report dynamically?
I have 3 stored procedure
The 1st one is used to gather information and process the calculation
another 2 stored procedure is used for generate the graph and both of them required to take 2 parameters. The 1st stored procedure will require 1 parameter (E.G. Reference Code) and will return a set of information including the data that could be use on the other 2 stored procedures.
After I added these 2 stored procedure, it requires me to pass 3 parameters to the report. I would like to know if I could only pass the Reference Code for stored procedure 1 and use it to retrieve the information for the other 2 parameter?
Thanks in advance
Chi

Hi Chi
To pass parameter from 1 stored procedure to another stored procedure, you will have to create sub report. In your case you will have to create 2 sub reports for 2nd and 3rd stored procedure and link those sub reports with the main report using Reference Code field in order to pass the values.
After creating the report when you will refresh the report, it will ask 4 parameters, one parameter for main report, one for the first subreport and two for second subreport to fetch the data correctly.
Regards
Poonam Thorat.

How to pass parameter from form6i to report6i

when i passed parameter from form6i to report6i, while previewing report the data was not displaying only fields heading was displaying, but in report6i there is a parameter form thru that it was displaying data, but thru form6i to report6i it was not. Please kindly help me and give me the some sample or example of it.
Thanks
Best regards
Zaheer

ADD_PARAMETER(pl_id,'P_SCRIPT',TEXT_PARAMETER,:b1.script);

Master-detail relationship - passing parameter from form to form

Hello.
I have a question about master detail relationship.
In first form we have master-detail relationship.
Example on dept, emp tables:
We query dept (master), so we can get one or many emp (detail) records. Then we have a third table - tasks. Tasks table (detail) can have many records for one employee.
Tasks table is in another form, which is called with call_form built_in. So we pass a parameter from master to detail - parameter empno. Because of that, we can only see tasks for one employee and can't navigate to another employee. This is normal.
Now comes the question.
Is it possible to call a form (with tasks table) with deptno parameter (so we can navigate through all employees with that department), but first show employee that was last used in first form?
Example of our goal.
Master: deptno = 20
Detail: navigate to JONES employee
Call new form (tasks)
Tasks for JONES employee are first shown
Can navigate to another employee - without requery
Is this possible?
If we pass deptno parameter, we can navigate through all employees - but must navigate to the employee we last used in first form.
If we pass empno parameter to second form, we see last used employee but cannot navigate to another employee without requery.
Hope you understand my problem.
Thanks.

Hi
yes you can pass parameter from one form to another.
In your master detail form set the trigger when-new-instance and there define the global variable like
:GLOBAL.G_CIRCLE_ID := NULL;
and in your task table set the trigger when-new-instance and there define the global variable like and also write this code
:GLOBAL.G_DIVISION_ID := NULL;
IF :GLOBAL.G_CIRCLE_ID IS NOT NULL THEN
     GO_BLOCK('DIVISION');
     SET_BLOCK_PROPERTY('DIVISION',DEFAULT_WHERE,'CIRCLE_ID ='||''''||:GLOBAL.G_CIRCLE_ID||'''');
     EXECUTE_QUERY;
END IF;
:GLOBAL.G_CIRCLE_ID := NULL;
now you maintain your trigger according your need.
Regards,

Problem while passing parameter from report to report.

Hi
I'm using forms and reports 10g, hava a problem while passing the parameter from reports to report.
i'm using srw.set_hyperlink to call report from report.
i have created a key value in the cgicmd.dat file called
faccre802005-2006: report=faccre80 destype=cache desformat=pdf userid=<userid/passwd@cs> server=<servername>
Now in the format trigger i'm using this key value
function BTN_DEBITFormatTrigger return boolean is
temp varchar2(5000);
IP_ADDRESS VARCHAR2(50);
SERVER_NAME VARCHAR2(10);
L_ACCT_CODE VARCHAR2(14);
begin
SELECT MAST_INT_DESC,MAST_USER_PGM_ID INTO IP_ADDRESS,SERVER_NAME FROM MAST_INT_INFO WHERE MAST_INT_ID='VISHWA';
temp := IP_ADDRESS||'?faccre80'||:P_FIN_YEAR||'+server='||server_name;
temp :=temp ||'+'||'P_PREVIOUS_CODE='''||:ACCT_CODE||''''||'+'||'P_COMPANY_CODE='''||:P_COMPANY_CODE||'''';
temp :=temp ||'+'|| 'P_FROM_DATE='''||TO_CHAR(:P_FROM_DATE,'DD-MON-RRRR')||''''||'+'|| 'P_TO_DATE='''||TO_CHAR(:P_TO_DATE,'DD-MON-RRRR')||''''||'+'||'P_TRUST_CODE='''|| :P_TRUST_CODE||'''';
temp :=temp ||'+'|| 'P_UNIT_CODE='''||:P_UNIT_CODE||''''||'+'||' P_FIN_YEAR='''||:P_FIN_YEAR||'''';
temp :=temp ||'+'|| 'P_LEVEL='''||:P_LEVEL||''''||'+'||'P_HEADER='''||replace(:P_HEADER,' ','%20')||''''||'+'||'P_FORMAT='''||:P_FORMAT||'''';
SRW.Set_Hyperlink(temp);
END;
return (TRUE);
end;
Report is coming but not the expected result because parmaeters are not coming from first report to second report.
If i dont use cgicmd file userid and password are displyed in the URL.
Pl tell me how to pass parameter from one report to another.
thanks and regards

Hi
I got the solution.
I forgot to add %* at end of the KEY value.

How can I pass parameter from report to form?

Hi :)
Now I try to build conference room like this by using form
and report. And i design that when users click at group report
then i'll show page that contain questions report and add
question form. And question form and report must receive the
same parameter from group report.
First Problem: is I don't know how group report send the
same parameter to question report and add question report at the
same time. And is it possible??? If not please suggest me what
should I do???
Second Problem: is I don't know how can I pass parameter from
report to form. I don't know the way to do it.
Please tell me!!! Please...
I look forward to hearing from all of you.
Thank You.

One way is to create a link based on that form and attach that
link with the report. Through links you can pass parameters

How to Pass Parameter from BIP to Dashboard Report

Hi,
Parameter from BIP to Dashboard Report
If I select BIP report paremeter should pass value to dashboard report
thanks in advance.
CHEERS ,
Jel

Hi Saichand,
I hav gone through above link its passing values from Dashboard prompt to BIP report only..
just i need like reverse (if i click on BIP report value then it should pass that value to Dashboard reports) in this this case how to pass parameter from BIP to dashboard report
Thanks in advance
Cheers,
Jel

Hw to pass parameter from report to forms

Dear Friends,
I m working on Forms n Reports 6i,
I m running report n passing parameter from the forms now the requirement is that if report run successfully it shuld give the msg otherwise give an user define error msg.
Hw do i pass any parameter from report to form for acknowledgment.
Thanking yours
Chandan

Hi Rajat,
using run_product built in i can pass parameter from forms to reports but hw can i get some parameter value from reports to forms as mentioned earlier my post
Thanking Yours,
Chandan

Passing Parameter from URL to Web Forms - Oracle 10 Application Server

Hi All -
I want to pass parameter from a URL to 10g Oracle Web Forms - Oracle Application Server 10.1.2
http://server1/forms/frmservlet?config=SATWEB_SSO&otherparams=username_sso=BABUS
How to receive this 'username_sso' value inside my forms application ?
Created a Parameter in the same name as URL parameter 'username_sso' in forms but didn't receive the value. I want to know how to receive the value of this parameter within forms from URL.
Thanks - Suresh

Try this,
1. Create a parameter in the formsweb.cfg (say username_sso) under default section ( or you can create it in your own config section)
2. Add the username_sso in otherparams parameter as username_sso=%username_sso%
3. Add this username_sso parameter in your form.
4. Run the form as
http://<machine>:<port>.....?form=blahblah....&otherparams=username_sso=scott
Regards,
Arun

Not able to pass parameter from one fragment to another fragment in another taskFlow

Hi,
I'm trying to pass parameter from one fragment to another fragment and want to print the parameter value in second fragment.
i have inputtext in first frag---
first fragment belongs to one taskflow1 and this taskflow1 i had darg and drop to one mainPage.
Under taskflow1 itself i drag and drop one taskflow call activity and on top of that i drag and drop another bounded taskflow as taskflow2
under taskflow2 i have one fragment as fragment2and in that i have one outputtext field, now here i want to print the value from fragment1--inputtextfield value
to achive this i had tried many ways but somewhere doing mistake please explain step by step.
Thanks
Mahesh

In addition you need to tell us your jdev version!
Can you elaborate on your use case a be more?
On which event this should happen?
In general contextual events should allow you to implement this, however, as I don't understand the use case, I find it hard to help.
Timo

Passing parameter from workitem to bsp page

Hi,
is it possible to pass parameter from workitem to bsp page and also vice versa?

SAP_WAPI_READ_CONTAINER function works well.but i need to pass a parameter to workitem container.
what i am trying to do is;
1-get data by using sap_wapi_read_container
2-change data
3-send changed data back to workitem
my problem is in third step.I am using SAP_WAPI_WRITE_CONTAINER. but it doesnt work.After execution the FM return_code set to 1.
Do u know how to set a variable in workitem?

Pass parameter FROM webcenter page TO dropped portlet

Hi All,
I have created a webcenter page
I have created a ADF remote portlet
I have regsitered the portlet as producer under webcenter page "Connection"
I dragged the portlet on webcenter (jspx) page.
now, my design requires that, i should be able to pass the paramter called "Country URL" that is available in webcenter page's backing bean TO this dropped portlet's SRC tag of IFRAME.
is it possible to pass paramter FROM webcenter page's backing bean TO SRC of IFRAME inside dropped portlet ?
If yes, the how will src refer to webcenter backing URL parameter ? ( like binding ...............)
yhx
dd

The idea stays the same in WebCenter. The technique i have described above does not change when you use ADF portlets.
There are only a few steps required:
1) Create the parameter in portlet.xml
2) assign the parameter to your portlet (also in portlet.xml)
3) deploy portlet
4) create a page parameter in webcenter on the page you are dropping the portlet on
5) assign the page parameter to the value of the portlet parameter
That's it.
Notice that the link in the above post of me (from 2010) is about JSR 168 portlets. Since WebCenter PS3, webcenter supports JSR 286 and some things change like you do not need to create the parameter in the oracle-portlet.xml anymore. You can easily do this in the portlet.xml
This is a more up to date post: http://yonaweb.be/inter_portlet_communication_jsr_286_and_webcenter_11g_ps3

Passing parameter from JSpx to Jsff

Hi ,
I am trying to create left menu panel using jsff and i am putting in a page .So I want to pass some parameter from jspx to jsff .Please let me know how can i achive ??

Hi,
I don't know If what you want is possible. But there are some ways to manage it.
One of them, is putting your value in any scope or managed bean, for example pageFlowScope.
The second one, you could use declarative components.
Maybe this link can help you: http://blogs.oracle.com/adffun/entry/fun_with_declarative_components

How pass parameter from Form to Graphics through Report?

I wrote a Report called by a Form and pass a parameter from the
Form to the Report, successfully! But I imported a Graphic in
the Report, and the Graphic could not get the parameter...(the
parameter in the Report and Graphic should both pass from the
Form).
I call the Report by " Run_Product( REPORTS, :V_PRTNAME,
SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id,NULL); " in the Form.
and I imported the image from file for the Graphic in the Report.
Thanks for your help!
null

Meilan (guest) wrote:
: I wrote a Report called by a Form and pass a parameter from the
: Form to the Report, successfully! But I imported a Graphic in
: the Report, and the Graphic could not get the parameter...(the
: parameter in the Report and Graphic should both pass from the
: Form).
: I call the Report by " Run_Product( REPORTS, :V_PRTNAME,
: SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id,NULL); " in the Form.
: and I imported the image from file for the Graphic in the
Report.
: Thanks for your help!
Meilan,
This forum is for Headstart related questions and experiences
only. Please go to metalink.oracle.com to get more information on
your problem.
Regards,
Ton
null

How to pass parameter from FM to report without changing interface of FM

Hello experts,
How can I pass a table name from a FM to the report calling the FM, without changing the existing interface of the FM.
Thanks,
Ajay.

Hi,
I f you want to pass any parameter from FM to Report or Vice-versa, parameter should me maintained in the FM otherwoise you can't pass any other than existing parameters.
Otherwise create a custom FM.
Regards,
Sunil

Pass parameter from Bean to AM Impl

Similar Messages

Maybe you are looking for