Pass parameter from HTML to Oracle Forms

I have an application that connects to a third party company to process credit card transactions. They require a Sucess URL and a Fail URL depending on whether or not the credit card transaction is approved.
How can I, using Oracle forms, "catch" the parameters that will be sent back to me by the third party? I need to update some tables depending on the creadit card transaction being approved.
Thanks,
Rose

You can do that using PSP ( PL/SQL Server Pages ) using basic autentication. If you want to get information about you can install Oracle 8.1.7 or higher and invoke the following URL : http://localhost and make click in mod_plsql.
[email protected]
Joel P�rez

Similar Messages

Query regarding passing parameters from HTML to oracle forms 9i

I am currently trying to design an application which is called from the web but the application is on forms 9i.
Once the URL is called the user id needs to be entered and then this needs to be passed on to the main form . As I understand it this user id needs to be passed form HTML into the first form on 9i.
Can anyone help me with the way this can be done
Thanks in anticipation
Surojeet

You can do that using PSP ( PL/SQL Server Pages ) using basic autentication. If you want to get information about you can install Oracle 8.1.7 or higher and invoke the following URL : http://localhost and make click in mod_plsql.
[email protected]
Joel P�rez

Passing Parameter from URL to Web Forms - Oracle 10 Application Server

Hi All -
I want to pass parameter from a URL to 10g Oracle Web Forms - Oracle Application Server 10.1.2
http://server1/forms/frmservlet?config=SATWEB_SSO&otherparams=username_sso=BABUS
How to receive this 'username_sso' value inside my forms application ?
Created a Parameter in the same name as URL parameter 'username_sso' in forms but didn't receive the value. I want to know how to receive the value of this parameter within forms from URL.
Thanks - Suresh

Try this,
1. Create a parameter in the formsweb.cfg (say username_sso) under default section ( or you can create it in your own config section)
2. Add the username_sso in otherparams parameter as username_sso=%username_sso%
3. Add this username_sso parameter in your form.
4. Run the form as
http://<machine>:<port>.....?form=blahblah....&otherparams=username_sso=scott
Regards,
Arun

Can't pass parameter from HTML form of multipart/form-dta type to JSP

I am using request.getParameter(passed variable name) to pass data from HTML form to JSP with no problem. WHen I try to pass data from HTML form of multipart/form-dta type to JSP as following:
< form enctype="multipart/form-data" name="theForm" method="post" ACTION="http://titan.ssd.loral.com:7778/ifs/jsp-bin/ifs-cts/stringsecond.jsp">
The passed value is null. Why?
How can I pass data successfully from this form to JSP?
How can I pass data from JavaScript to JSP?
Thank you

I am using request.getParameter(passed variable name)
to pass data from HTML form to JSP with no problem.
WHen I try to pass data from HTML form of
multipart/form-dta type to JSP as following:
< form enctype="multipart/form-data" name="theForm"
method="post"
ACTION="http://titan.ssd.loral.com:7778/ifs/jsp-bin/if
-cts/stringsecond.jsp">
The passed value is null. Why?because the jsp most likely does not handling of POST parameters like this.
How can I pass data successfully from this form to
JSP?jsp's are not meant to read such amounts of data. this (= uploading) is a typical task for a specialized servlet. there you have full control over input and output. if you need to, you can still forward to a jsp after processing in the servlet.
How can I pass data from JavaScript to JSP???? i'm not sure what exactly you mean. normally you put it into an url and submit it.
robert

How to pass parameter from unix to oracle

Hi all,
Kindly need your help regarding to this problem
for i in `ls *.dat*`
do
echo "File $i"
sqlplus -s $conn <<END
set echo off
set termout off
set feedback off
set verify off
set showmode off
set pagesize 0
set recsep off
spool file_$day
select nvl((select file_name from abc where file_name=$i),'Files Not Found') from dual;
spool off
exit
END
done
I need to pass parameter to the select statement but it failed. The error is
select nvl((select file_name from abc where file_name=),'Files Not Found') from dual
ERROR at line 1:
ORA-00936: missing expression
It seems like the parameter didnt passed to the query. Need everyone helps. Urgent!
Many thanks
Tiiim

I would have helped you had you not been abusive and called your request urgent. If it is truly urgent call an ambulance or the fire department or Oracle Support.
We are volunteers and your request is no more important, or urgent, than that of anyone else here.
An apology would be appropriate.

Passing Parameter from Web Page to Form 6i

Dear All,
We are using 9i AS with Form 6i. I want to created a web page for user login and called my application By passing value
window.open("http://hrtest/dev60cgi/ifcgi60.exe?form=login_form.fmx&width=1000&height=700&
userid=logme/logme1@test","","width=1000,height=700,top=0,left=0,location=no,directories=no,
status=no,menubar=no,toolbar=no,maximize=yes,resizable=yes")
and it successfully run.
I want to pass additional parameter to my login_form.fmx from web page like User Shift entered by user on logon ?
Please help me out.
Regards,
Khurram

I got the clue
pass parameter in your UR
as
//hrtest/dev60cgi/ifcgi60.exe?form=LOGIN_FORM_Para.fmx&width=1000&height=700&userid=power/power1@hrtest&otherparams=PAKISTAN=ALLAH"
Define a :PARAMETER.PAKISTAN on Form
and write following trigger
BEGIN
if :PARAMETER.PAKISTAN = 'ALLAH' then
message('ALLAH HO AKBAR');
message('ALLAH HO AKBAR');
message(:PARAMETER.PAKISTAN||' HO AKBAR');
message(:PARAMETER.PAKISTAN||' HO AKBAR');
else
message('INSH'||:PARAMETER.PAKISTAN);
message('INSH'||:PARAMETER.PAKISTAN);
end if;
END;
Regards
Khurram Altaf | Assistant Manager ERP
Enterprise Resource Planning Department
Kohinoor Textiles Mills Ltd
Peshawar Road, Rawalpindi.
+92.51.5473940-44 ext 250 | +92.333.5256626
e-mail: [email protected] | web: www.kmlg.com

Pass parameter from dynamic page to form

I have a report that uses a link to pass a parameter (projno) to a dynamic page. This dynamic page calls a procedure which, using the projno, pulls information from four tables. Depending on who the user is and what phase the project is in, each heading can be a link to a form so that the proper user can update the project. For instance, the projetc manager can update the progress table during phases 2-9. So I want the Progress Heading to be a link to a form so that the project manager can update the progress for a specific project number. I tried to put the link in the procedure like this:
if iPhase in (2,3,4,5,6,7,8,9) then
          htp.p('<TD><a           href="/pls/portal/PORTAL.wwa_app_module.link?p_arg_names=_moduleid&p_arg_values=6803259033&p_arg_names=projno&p_arg_values='||projno||'&p_arg_names=_projno_cond&p_arg_values=%3D&p_arg_names=_sessionid&p_arg_values=" target="_blank"><FONT FACE="VERDANA" SIZE="2">Progress</FONT></a></TD><TD width="10"></TD>');
     else
          htp.p('<TD><FONT FACE="VERDANA" SIZE="2">Progress</FONT></TD><TD width="10"></TD>');
     end if;
But it brings up a blank form... no parameters are passed. Help!?

when I use :projno I get a "bad bind variable" error. But really, I don't think that's the problem. Using the code in my last message, I can mouseover the link and see the correct information:
http://spring.ous.edu:7778/pls/portal/PORTAL.wwa_app_module.link?p_arg_names=_moduleid&p_arg_values=6803259033&p_arg_names=projno&p_arg_values=14&p_arg_names=_projno_cond&p_arg_values=%3D&p_arg_names=_sessionid&p_arg_values=
When I actually click on the link however, this is the URL now displayed in the address field:
http://spring.ous.edu:7778/pls/portal/PORTAL.wwa_app_module.show?p_sessionid=2592
It strips the url of the projno information.

How to pass query parameter from HTML in SAP XMII

I need to pass the value to query parameter from html .i m quite confused about how to do that .can anyone give me a valid point....

Ramesh,
Addition of Rupesh,
U can also pass in the form of INLINE paramters.
Like
<Applet name = <appletname> width .......>
<param NAME = "param.1" VALUE = <value>
<param NAME= "param.2" VALUE = " <value>
</APPLET>
Thanks
Hari

Master-detail relationship - passing parameter from form to form

Hello.
I have a question about master detail relationship.
In first form we have master-detail relationship.
Example on dept, emp tables:
We query dept (master), so we can get one or many emp (detail) records. Then we have a third table - tasks. Tasks table (detail) can have many records for one employee.
Tasks table is in another form, which is called with call_form built_in. So we pass a parameter from master to detail - parameter empno. Because of that, we can only see tasks for one employee and can't navigate to another employee. This is normal.
Now comes the question.
Is it possible to call a form (with tasks table) with deptno parameter (so we can navigate through all employees with that department), but first show employee that was last used in first form?
Example of our goal.
Master: deptno = 20
Detail: navigate to JONES employee
Call new form (tasks)
Tasks for JONES employee are first shown
Can navigate to another employee - without requery
Is this possible?
If we pass deptno parameter, we can navigate through all employees - but must navigate to the employee we last used in first form.
If we pass empno parameter to second form, we see last used employee but cannot navigate to another employee without requery.
Hope you understand my problem.
Thanks.

Hi
yes you can pass parameter from one form to another.
In your master detail form set the trigger when-new-instance and there define the global variable like
:GLOBAL.G_CIRCLE_ID := NULL;
and in your task table set the trigger when-new-instance and there define the global variable like and also write this code
:GLOBAL.G_DIVISION_ID := NULL;
IF :GLOBAL.G_CIRCLE_ID IS NOT NULL THEN
     GO_BLOCK('DIVISION');
     SET_BLOCK_PROPERTY('DIVISION',DEFAULT_WHERE,'CIRCLE_ID ='||''''||:GLOBAL.G_CIRCLE_ID||'''');
     EXECUTE_QUERY;
END IF;
:GLOBAL.G_CIRCLE_ID := NULL;
now you maintain your trigger according your need.
Regards,

How can I pass parameter from report to form?

Hi :)
Now I try to build conference room like this by using form
and report. And i design that when users click at group report
then i'll show page that contain questions report and add
question form. And question form and report must receive the
same parameter from group report.
First Problem: is I don't know how group report send the
same parameter to question report and add question report at the
same time. And is it possible??? If not please suggest me what
should I do???
Second Problem: is I don't know how can I pass parameter from
report to form. I don't know the way to do it.
Please tell me!!! Please...
I look forward to hearing from all of you.
Thank You.

One way is to create a link based on that form and attach that
link with the report. Through links you can pass parameters

Hw to pass parameter from report to forms

Dear Friends,
I m working on Forms n Reports 6i,
I m running report n passing parameter from the forms now the requirement is that if report run successfully it shuld give the msg otherwise give an user define error msg.
Hw do i pass any parameter from report to form for acknowledgment.
Thanking yours
Chandan

Hi Rajat,
using run_product built in i can pass parameter from forms to reports but hw can i get some parameter value from reports to forms as mentioned earlier my post
Thanking Yours,
Chandan

How to pass parameter from form6i to report6i

when i passed parameter from form6i to report6i, while previewing report the data was not displaying only fields heading was displaying, but in report6i there is a parameter form thru that it was displaying data, but thru form6i to report6i it was not. Please kindly help me and give me the some sample or example of it.
Thanks
Best regards
Zaheer

ADD_PARAMETER(pl_id,'P_SCRIPT',TEXT_PARAMETER,:b1.script);

Problem while passing parameter from report to report.

Hi
I'm using forms and reports 10g, hava a problem while passing the parameter from reports to report.
i'm using srw.set_hyperlink to call report from report.
i have created a key value in the cgicmd.dat file called
faccre802005-2006: report=faccre80 destype=cache desformat=pdf userid=<userid/passwd@cs> server=<servername>
Now in the format trigger i'm using this key value
function BTN_DEBITFormatTrigger return boolean is
temp varchar2(5000);
IP_ADDRESS VARCHAR2(50);
SERVER_NAME VARCHAR2(10);
L_ACCT_CODE VARCHAR2(14);
begin
SELECT MAST_INT_DESC,MAST_USER_PGM_ID INTO IP_ADDRESS,SERVER_NAME FROM MAST_INT_INFO WHERE MAST_INT_ID='VISHWA';
temp := IP_ADDRESS||'?faccre80'||:P_FIN_YEAR||'+server='||server_name;
temp :=temp ||'+'||'P_PREVIOUS_CODE='''||:ACCT_CODE||''''||'+'||'P_COMPANY_CODE='''||:P_COMPANY_CODE||'''';
temp :=temp ||'+'|| 'P_FROM_DATE='''||TO_CHAR(:P_FROM_DATE,'DD-MON-RRRR')||''''||'+'|| 'P_TO_DATE='''||TO_CHAR(:P_TO_DATE,'DD-MON-RRRR')||''''||'+'||'P_TRUST_CODE='''|| :P_TRUST_CODE||'''';
temp :=temp ||'+'|| 'P_UNIT_CODE='''||:P_UNIT_CODE||''''||'+'||' P_FIN_YEAR='''||:P_FIN_YEAR||'''';
temp :=temp ||'+'|| 'P_LEVEL='''||:P_LEVEL||''''||'+'||'P_HEADER='''||replace(:P_HEADER,' ','%20')||''''||'+'||'P_FORMAT='''||:P_FORMAT||'''';
SRW.Set_Hyperlink(temp);
END;
return (TRUE);
end;
Report is coming but not the expected result because parmaeters are not coming from first report to second report.
If i dont use cgicmd file userid and password are displyed in the URL.
Pl tell me how to pass parameter from one report to another.
thanks and regards

Hi
I got the solution.
I forgot to add %* at end of the KEY value.

How to pass parameter from 1 stored procedure to another stored procedure inside crystal report

Hi
I have several stored procedure in my Crystal Report. I am wondering if it is possible for me to pass a parameter to one of the stored procedure and to use the result of that stored procedure E.g. CustomerCode. To another 2 stored procedure to generate the report dynamically?
I have 3 stored procedure
The 1st one is used to gather information and process the calculation
another 2 stored procedure is used for generate the graph and both of them required to take 2 parameters. The 1st stored procedure will require 1 parameter (E.G. Reference Code) and will return a set of information including the data that could be use on the other 2 stored procedures.
After I added these 2 stored procedure, it requires me to pass 3 parameters to the report. I would like to know if I could only pass the Reference Code for stored procedure 1 and use it to retrieve the information for the other 2 parameter?
Thanks in advance
Chi

Hi Chi
To pass parameter from 1 stored procedure to another stored procedure, you will have to create sub report. In your case you will have to create 2 sub reports for 2nd and 3rd stored procedure and link those sub reports with the main report using Reference Code field in order to pass the values.
After creating the report when you will refresh the report, it will ask 4 parameters, one parameter for main report, one for the first subreport and two for second subreport to fetch the data correctly.
Regards
Poonam Thorat.

How to Pass Parameter from BIP to Dashboard Report

Hi,
Parameter from BIP to Dashboard Report
If I select BIP report paremeter should pass value to dashboard report
thanks in advance.
CHEERS ,
Jel

Hi Saichand,
I hav gone through above link its passing values from Dashboard prompt to BIP report only..
just i need like reverse (if i click on BIP report value then it should pass that value to Dashboard reports) in this this case how to pass parameter from BIP to dashboard report
Thanks in advance
Cheers,
Jel

Pass parameter from HTML to Oracle Forms

Similar Messages

Maybe you are looking for