Pass percentage for BASIS, code C_TADM51_70
Dear All,
Please anyone can tell me what is the pass marks for basis, code C_TADM51_70, which happened in Teched 2008.
Thanks
XEAG
Thanks for the reply
Similar Messages
-
Pass percentage for the BI certification exam C_TBW45_70 is required
Hi Group,
Please kindly let me know the pass percentage ( % ) for the BI certification exam ( code : C_TBW45_70 ) in the SAP TechEd 2008. ( BI 7.0 certification at the Associate level ).
As far as my knowledge is concerned, last year it was 57% but, somebody told that it has been changed from this year to 67%.
So please let me know whether this is correct or not.
Regards,
Vishnu.Hi Vishnu
I recently appeared for C_TBW45_04S. on July 11 '08
The pass Percentage for this Exam is 70%.
By the way I cleared the Exam.
Good Luck to you .
Thanks and regards
Novino -
Pass percentage for ABAP Associate Certification in SAP TechED
Hi All,
May i know what is the pass percentage for ABAP Associate Certification in SAP TechED.
Thanks in Advance,
Ravi PHi Ravikumar P,
I dont know about Teched but, SAP Education Channel Partner arranges for training - online or instructor-led - on certain amount of fees. Their schedules can be checked from official website of SAP.
For your ready reference, here it is --
Link: http://www.sap.com/asia/services/education/schedule/schedule_IN.htm
For fees and relevant short info, this page is sufficient.
Now, for your second part of the question, the passing percentage has been substantially reduced to 53 % in ABAP. But, the catch is -- partial marking has been eliminated.
This means, if one question has several sub-questions, you have to answer all of them right to get the marks allocated for that one question. If any of the answer to sub-questions gone wrong, whole of the marks assigned with that question will not be given to you.
Ex - Lets say, one question is
1) What is applicable in Job Application --
i) When you are asked to apply online, you should --
a) Contact personally
b) Ring them up
c) Mail your Credentials
ii) When called for interview, you should not --
a) Reach there in time
b) Behave sober
c) Break the rules altogether
Suppose, 160 marks are there for 80 questions and this one is one out of those. Therefore, this one should fetch you, if done correctly ( Bold choice here ), 2 marks.
But, suppose, you made wrong choice in either of two sub-questions as (a) or (b). None of the marks would be given to you. Even if you made one answer right.
Hope this would be good enough. Need even more info, you should contact any of the Education Channel Partner of SAP.
Thanks.
Kumar Saurav. -
I can't get passbook to accept my loyalty cards. It keeps saying no pass available for this code. What am I doing wrong?
You may have installed your TextWrangler application without administrator privileges. In this you'll have to look for the twdiff file in the Local Applications Support Folder (refer to TextWrangler User Manual).
To fix your problem with Dreamweaver, while selecting your File Compare tool, try looking for the twdiff file in the following location :
Macintosh HD:usr:local:bin:twdiff
That should definitely work. It did for me
Cheers! -
Passing Percentage for SAP-ABAP certificatio.
Hi All,
I want to know what is the passing percentage for SAP-ABAP certification.
Regards
Nitin.Hello,
Go to this link to see syllabus and other details.
Very useful to know the details.
http://www.sap.com/services/education/certification/index.epx
Regards,
Ravi -
Passing percentage for the course C_TAW12_70
Hallo friends,
Do you know the passing percentage for the course C_TAW12_70?
Thanks,
ShilpaHi,
I think 70%
bye -
What is the passing mark for new BO Certification exams
Hi,
What is the passing percentage for new BO certifcation exam for Web Intelligence. Exam Code is C_BOWI_30.
Thanks,
CDIf you search on internet you will get your solution its 75%. try : http://www.forumtopics.com/busobj/viewtopic.php?p=741799
-
C_TFIN22_64 Pass Percentage
Hi,
Does any one know the pass percentage for C_TFIN22_64 certification? As far as I know there is 55% or 66%. I'll do the certification exam next week.
Regards,
Arif WHi Arif,
The pass mark for this TFIN22_64 exam is 57%. the pass mark for the FI exam is 66%. However, the pass mark may be changed by SAP. The pass mark which is shown on your screen on the exam date will be final and correct one.
Regards,
Vishnu.
Edited by: Vishnu Sivanagari on Dec 27, 2010 1:36 PM -
Huge Confusion for Passing Percentage
Dear SAP Gurus
I do know there have been many posts with respect to many queries relating to passing percentage in SAP SD Certification Exam
I also know passing percentage has reduced from 57% from 70 % and no partial marks given
Now my question is divided in to two parts
1) for people who take instructor base training for them passing percentage is 57% and no partial marks given
2) For People who take online training ( e learning ) for them still 70% holds good it seems and partial marks will be given
this is the info counsellors of both siemens and genovate are giving and they are also no very much particular on this
when contacted SAP INDIA they are giving an answer it depends on module to module and they are also not giving authentic information
I request all gurus who have contacts in sap india or who have already knowledge on this to provide me wether for people who appear for elearning programme here in INDIA as versions are different as said by siemens for them passing percentage is 70 % it seems
Please provide the proper info as this confusion can be solved for ever
Warm Regards
Consultant SDHi lakshmipathi
At first thanks for answering to my question
i see a difference in booking code if it is C_TSCM62_05 passing percentage would be 70% and Partial marks are there
if it is C_TSCM62_60 i think its 57% is pass and no partial marks
Please throw some light on this. correct me if i am wrong the above codes are for SAP SD -
Pass URL parameter for zip code
In this fake url I want to pass the zip code value of the confirmed BP into "zipcode"
https://acme.com/locator.jsp?zip=zipcode
from the other post I have read the parameter name would be "zipcode" and thru the transaction launcher I am able to assign parameter value =
//selectedClmBpLinkRelationship/BpRelLinkBusinessPartner/BuilStandardAddressRel/POSTL_COD1
The transaction launcher is opening the launcher but not passing the value into the field. The window opens but the field is not filled with the zip code.
If I open a new ie browser and put in url
https://acme.com/locator.jsp?zip=60001
the url is reached and 60001 is filling the zip code field.
Is there an easy way to debug and see if any value is getting passed?
Am I conceptually on base for what I am trying to do?Hi Shwetha,
That got me pointed in the right direction where we could get it to work.
For others, these were some other points we used to get it to work.
1. in the IMG where the url is defined don't add the ZIP parameter here so our IMG entry = https://acme.com/locator.jsp?
when the page launched correctly the parameters showed https://acme.com/locator.jsp?&zipcode=60001
2. for zip code parameter value we used //currentCustomer/BuilStandardAddressRel/POSTL_COD1 >> this goes in the transaction launcher with parameter zipcode and is then visible in the IMG entry "copy/delete launch transactions" -
What is the Pass % for SAP Netweaver C_TADM51_70 Certification this Yea
Hi,
can someone Help me to know What is the Pass % for SAP Netweaver C_TADM51_70 Certification @ teched this Year.
We need to achieve the pass Critieria in Individual Sections or We need to Achieve the Pass Critieria / Marks in Overall all sections ?
Please Confirm the Pass% 55% or 60% or 80% etc..
Also Will be greatful if someone can give more information on this...
Thanks in Advance
Rgs
Dan.Hi,
Pass percentage(SAP Teched) = 60%
Pass percentage(Individual) = 70%
Any I advise you to call up SAP education partner to confirm the same..
Regards
Thilip Kumar -
I need to pass value for Actual GI date field in VL01N t code, I am using BAPI_DELIVERYPROCESSING_EXEC. can any one tell me how can i pass vaule ?
Hi Abdul,
Sorry for my unprecise answer, but you talk about a tcode, but you're using a BAPI Call. Maybe you want to call the transaction in batch mode?
http://help.sap.com/saphelp_erp60_sp/helpdata/de/fa/09715a543b11d1898e0000e8322d00/content.htm
Regards,
Franz -
No ISO code passed on for field API6850_UOM-DIM_UOM_ISO
Hi,
Can anyone tell me the steps to find out which UOM is not having mapped in GTS vs ECC? It doesnot tell which UOM is not passing. It is in production so can't check in GTS.
Thanks in advance.Hi
The following knowledge Based article details the customising relating to this error:
1740997 - KBA: No ISO code passed on for field API6850_UOM-DIM_UOM_ISO. Msg no.
/SAPSLL/CORE_PRODUCT212
Are you seeing this error with the transfer of a particular product?
In the material master MM03 (and table marm) you can see unit of measures defined.
You would need to ensure that an ISO code exists in transaction CUNI for each uom defined relating to the material being transfered to GTS.
Hope this helps
Kind Regards
Ann Marie -
C_TSCM52_05 SAP certification for SAP MM pattern and pass percentage
Hi Experts,
Good day every one.
Can any one please let me know if you appear for the sap mm certification.
i need the pattern and pass percentage.I am going to attend in december.
i want share my experiences with you after completion.
please some one who attended most recently or if you have any known informatiom let me know.
Thanks in advance.
Best Regards,
Babu,
9930154536Hello,
Pass grade is 63%.
You will have multiple answer questions, you will be told how many choices you should select, if you miss one the whole question will be marked wrong and you won't get points for the options you got right.
Also you will have single answer question...
I took it last month and passed it, you should study hard and read the material at least 3 times,
good luck -
Base Table for problem code in Cs_incidents_all_b
hi
in cs_incidents_all_b we have problem_code. the does not contain any data ... we have any tl table for problem code i have cssr_prob_code_mapping_detail but if i query this
SELECT dra.repair_number,
items.description item_desc,
prob.problem_code,
fndl.meaning flow_status_name,
inc.summary,
nvl(cp.instance_number,'Not availble') ib_instance_number
FROM csd_repairs dra,
csd_repair_types_tl drtt,
cs_incidents_all_b sr,
csi_item_instances cp,
fnd_lookups fndl,
csd_flow_statuses_b fsb,
mtl_system_items_kfv items,
mtl_units_of_measure_tl uom,
jtf_rs_resource_extns_tl rstl,
jtf_rs_groups_tl rgtl,
fnd_lookups plkup,
cs_incidents_all_tl inc,
cs_sr_prob_code_mapping_detail prob,
cs_incident_types_b ty
WHERE dra.repair_type_id = drtt.repair_type_id
AND drtt.language = userenv('LANG')
AND dra.repair_mode = 'WIP'
AND dra.incident_id = sr.incident_id
AND dra.CUSTOMER_PRODUCT_ID = cp.INSTANCE_ID (+)
AND dra.flow_status_id = fsb.flow_status_id
AND fsb.flow_status_code = fndl.lookup_code
AND fndl.lookup_type = 'CSD_REPAIR_FLOW_STATUS'
AND dra.inventory_item_id = items.inventory_item_id
AND dra.unit_of_measure = uom.uom_code
AND uom.language = userenv('LANG')
AND dra.resource_id = rstl.resource_id (+)
AND rstl.category (+) = 'EMPLOYEE'
AND rstl.language (+) = userenv('LANG')
AND dra.owning_organization_id = rgtl.group_id (+)
AND rgtl.language (+) = userenv('LANG')
AND dra.ro_priority_code = plkup.lookup_code(+)
AND plkup.lookup_type(+) = 'CSD_RO_PRIORITY'
AND items.organization_id = cs_std.get_item_valdn_orgzn_id
AND inc.incident_id =dra.incident_id
and ty.incident_type_id=sr.incident_type_id
and prob.incident_type_id=ty.incident_type_id
AND fndl.meaning in('Open')
order by dra.repair_numbereach diffrent problem codes for same repair number here i am want records relevant to Depot RepairIn 11.5.9, the problem and resolution codes are stored in FND_LOOKUP_VALUES table with lookup type as 'REQUEST_PROBLEM_CODE' and 'REQUEST_RESOLUTION_CODE'. I'm hoping you could still use these tables to find problem codes, even if you were on 11.5.10 or R12.
Join would be something like:
WHERE fnd_lookup_values.lookup_type = 'REQUEST_PROBLEM_CODE'
AND fnd_lookup_values.problem_code = cs_incidents_all_b.problem_code
Regarding restricting the query for Depot Repair service requests, you need to restrict by the the incident_type_id for this type of SRs (like id for Depot incident type is 10003 for us).
HTH
Alka
Maybe you are looking for
-
Changing keyboard layout don't work
Hello, I've messed around with my father's iBook for a month to see how it could be used. He received it with a French keyboard, I'm used to using a Swiss-French keyboard or a Scandinavian keyboard. At one moment I could change between these three ke
-
How do I add files to a local Subversion repository using JDeveloper?
Hi Guys and Gals, Using Studio Edition Version 11.1.1.3.0. Extension "Version Support for Subversion 11.1.1.3.37.56.60". I'm getting into creating my first "real" JDeveloper program and want to implement Subversion control. I've never done anything w
-
My touchsmart screen is not responsive to touch in one area, can this be fixed?
1. Touchsmart 600-1350 2. Windows 6 64-bit 3. No error messages are given
-
Slow inserts into partitioned table
I am having trouble inserting into a simple partitioned table after an upgrade to 11.2.0.3. I'm seeing insert speeds of subsecond up to 10 and 12 seconds. We have pre created the partitions for this table (and all children via reference partitioning)
-
Plz tell me about in bdc source table to target table covertion
hi, this is kalyan how can we transfer the data from source to target