Pass through credentials on ipad

I have a SharePoint Calendar that users are viewing on their IPAD, and I have the link to the Calendar saved as an icon on their home screen.
But everytime they open it they have to login with their username and password on the MS Forefront TMG login screen, to get to the SharePoint Calendar.
Is there a way to pass through their login credentials to this SharePoint Calendar, so they can by-pass logging everytime?
thanks!

Hi,
According to your description, my understanding is that you want to pass logging the user credentials when accessing the SharePoint Calendar.
I suggest you can check if TMG has some option to remember the credentials.
TMG forum:
https://social.technet.microsoft.com/Forums/forefront/en-US/home?forum=Forefrontedgegeneral
Thanks
Best Regards
Jerry Guo
TechNet Community Support

Similar Messages

New events in iCal are entered on my iMac. These events pass through correctly to my other computers and iPhone. However, each new event shows up twice on my iPads. The clutter is distracting. Anyone have suggestion as to correcting this annoyance?

New events in iCal are entered on my iMac. These events pass through correctly to my other computers and iPhone. However, each new event shows up twice on my iPads. The clutter is distracting. Anyone have suggestion as to correcting this annoyance?

New events in iCal are entered on my iMac. These events pass through correctly to my other computers and iPhone. However, each new event shows up twice on my iPads. The clutter is distracting. Anyone have suggestion as to correcting this annoyance?

Does the iPad 2 pass through TV the same way that the iPhone 4s does ?

Does the iPad 2 pass through TV the same way that the iPhone 4s does ? I have an Arcam rCube dock which allows the tv pass through from the iPhone 4s and I was wondering if the iPad 2 will do the same if I buy a dock extender and what should I check for in a dock extender ?

No - that feature does not exist on the iPad2 and I know of no plans - nor would anyone else here - for that feature to be added with a software update in the future.

IPhone Dolby Digital Pass-through

I can see from the Tech Specs of both the iPad 2 and 3 that they have the ability of Dolby Digital Pass-through using the Apple Digital AV Adaptor.
Can anyone confirm if the iPhone 4 or 4S also have this ability?
It's not specifically mentioned on their Tech Specs pages, but the hardware capabilities are almost identical.
Cheers.

forgot to say - i'm also using linein from rogue amoeba
http://rogueamoeba.com/freebies/
sj

HT4623 setting a pass code on the Ipad

Several weeks ago I updated the software on my ipad2. After completing, I needed a pass code. I never set a pass code so therefore I had to restore the ipad. (one major headache!). I'd like to update the software, but I do not want to go through this again. How do you go about setting a pass code on the Ipad. I'm new to all of this and want to find out more about the Icloud too.

Hi 2moreyearstoretire,
Thanks for visiting Apple Support Communities.
This article has some useful information about using passcodes on your iPad:
iOS: Using passcodes
http://support.apple.com/kb/ht4113
Additionally, these pages are a good starting place to learn about iCloud:
http://www.apple.com/icloud/features/
iCloud: More Resources
http://support.apple.com/kb/PH2568
Best,
Jeremy

OBIEE and Essbase security pass through

Hi All,
I'm using Essbase as a data source for OBIEE. Right now I'm trying to use Hyperion security to pass through OBIEE. I've setup OBIEE to use Hyperion Shared Services as custom authenticator and Hyperion users can log in. However, I'm having problem passing through the users to Essbase. I've changed the Essbase connection pool to use :USER and :PASSWORD. When I tried to check for global consistency, I'm getting the following error
[38098] The password in the Connection Pool '"server"."Connection Pool"', associated with the Repository Initialization Block '"SUB_VAR_BLOCK_server"', contains the use of :USER or :PASSWORD.
When I tried to open any existing Essbase reports from OBIEE, I'm getting this error (as expected)
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. Essbase Error: Login fails due to invalid login credentials (HY000)
Any ideas on how to get around this issue? Thanks
Regards,
Gerd

Hi Gerd,
Could you please explain in detail how you have setup OBIEE to use Hyperion Shared Services as custom authenticator so that Hyperion users can log into OBIEE?
Please provide the steps and custom authenticator function?
we would need to implement it fromm scratch. So, your help will be greatful.

Pass Through Auth Not Using Novell eDirectory Over RDP - Virtual Desktop

Hi,
I have installed and configured SGD and the Virtual Desktop Adapter to a Virtual Center server. So far that whole side of things is working great. Machines are cloned, prepped and connected to by users through the My Desktop link in SGD. Now that I am attempting to perfect the master template I have encountered some issues. The network here is Novell eDirectory and at the moment when the desktop is launched the username and password used to authenticate to the SGD webtop are passed through to the Virtual Machine, but it seems that they are passed through to the Windows Authentication System/GINA even though the Novell client is in place.
The virtual machines are Windows XP and by default none of the user accounts exist locally, so of course the login fails. This drops the user back to the login box where it can be seen that the Workstation Only tick box is checked. Settings in the Novell client to always default to eDirectory authentication, forget last setting used etc has all been set properly. Even when hiding the Workstation Only tickbox the username and password are passed to local system authentication still.
I need to get the username and password sent to the Novell eDirectory authentication system/GINA in order for Zenworks to create the user on the local system. When dropping back to the login box and manually unticking the Workstation Only box login proceeds normally. Drives are mapped and the local user account is created by the Zenworks agent.
Is SGD specifically targeting an authentication subsystem within the virtual machine, regardless of your installed authentication handler/GINA preference order? Can I get SGD to pass the details to the Novell client? Barring that is there some way I can prevent SGD passing the details? I tried turning off some of the authentication details caching etc but some of that is needed to rename the virtual machines after the user connecting. For the time being having users authenticate twice would be acceptable, having them login in, then get an error message, then manually unticking Workstation Only then relogging in is not acceptable.
I have been searching these forums, Novell forums, Terminal Server forums for answers but so far nothing has been of any help. Please note that the login box is not the cut down/windows only login box that users are seen when they connect over RDP to a machine that already has a user logged in locally. There is no user logged in locally and the full login box is presented once the login failed message is cleared.
Any help, or even a nudge in the right direction would be great.
Thanks
Russ

Hi,
Thanks for taking the time to respond. I tried the full context user name path as well, but its defiantly just being passed to a different GINA. The only credentials that determine if you have RDP access to a server is the local machines credentials, so Microsoft have the service pass authentication straight to the Microsoft GINA non-interactively instead of honouring the installed GINA's. So it will fail no matter what I put in since the account doesn't exist locally yet. People have implemented solutions that depend on Active Directory domains, but that's what I am trying to avoid.
In that situation the AD Domain would allow access to the local machine based on Windows permissions, and a registry setting TSAutoLogin or something would trigger the Novell log in in parallel to map the Netware shared volumes. With no domain you can't get the initial log in triggered for the Novell client to kick in.
Connecting to the virtual machine using an RDP client without pre-entering authentication information does show the Novell Login (NWGINA) with all the right settings in place, so I have modified the expect (login) script for SGD not to automatically pass log in information through with the RDP connection it makes. The result is a clean Novell login box without any errors that a user can just enter their details into a second time.
Russ

Pass-through authentication failing

The enviroment:
Server A: Windows Server 2008 R2 / IIS 7
Server B: Windows Server 2003 R2
Domain Controller: Windows Server 2003 R2
Both server A and B are part of the same domain.
The issue:
We have files stored in server B that are being shared as \\B\Files. We want to have a virtual directory/application in IIS on server A to make those files available on a web browser,
but, we want access to be controlled by NTFS permissions, and access granted to the user accessing the website by pass-through authentication (challenged for user and password by the browser).
We have set up an application pool, and have set the identity of it to a user that has
read NTFS permissions to \\B\Files. We then set up an Application and set its application pool to the one mentioned above, and have pointed it physical location to \\B\Files. In the advanced settings, we set the physical path credentials
to Application user (pass-though authentication).
In the authentication settings for the application, we disabled all but Windows Authentication, and in the providers, we have removed everything but NTLM, which is the one we want.
When we test it (https://serverb.com/Files) however, we are challenged (user/password prompt comes up) as expected, but despite what we put in, the prompt comes back, as if the user/password was wrong, or as if the user did not have enough permissions
to access the files. We checked permissions and that's not it. And we have also checked the domain controller to see if the request is getting there, and it is, which means that it is authenticating properly. We can only assume there is a communication
problem, or restriction somewhere.
We are not sure where else to look, and any ideas would be greatly appreciated.
Thank you

On Wed, 5 Feb 2014 17:48:47 +0000, ucis wrote:
We are not sure where else to look, and any ideas would be greatly appreciated.
Since this is really an IIS question you should post to the official IIS
forums:
http://forums.iis.net
Paul Adare - FIM CM MVP
It used to be said [...] that AIX looks like one space alien discovered
Unix, and described it to another different space alien who then
implemented
AIX. But their universal translators were broken and they'd had to gesture
a lot. -- Paul Tomblin

Cannot rememember pass code for my ipad

I cannot remember my pass code for my ipad what do i do

If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Receive wireless signal and pass through via ethernet

Hi,
I'd like to know if it's possible to pass through internet via ethernet from a Time Capsule that receives a Wireless signal.
How can I do this?
Thanks!

Well, to be more specific, this a scheme of what I'm trying to do (it represents the floors in my house):
[URL=http://minus.com/liKoug8pFOaFN][IMG]http://i.minus.com/jiKoug8pFOaFN.jpg[/IMG][/URL]
So;
- Telenet modem wired to D-link wireless router.
- D-link router to AE (wireless)
- AE to stereo (wired)
- D-link router to TC (wireless)
- TC to PC (wired)
- TC to printer (USB)
- D-link to tv (wired)
- D-link to Digibox (digital television - wired)
I want to be able to stream music from every device on the netwerk (iPad, iPhone, MBP, ..)
and print from every device. All music should be streamed from iTunes Library on TC.
I hope this is clear
Thanks in advance!

Data has changed after passing through FIFO?

Dear experts,
I am currently working on a digital triangular shaping using the 7966R FPGA + 5734 AI. I am using LabView 2012 SP1.
Some days ago I have encountered a problem with my FIFOs that I have not been able to solve since. I'd be glad if somebody could point out a solution/ my error.
Short description:
I am writing U16 variables between ~32700-32800 to a U16 configured FIFO. The FIFO output does not coincide with the data I have been writing to the FIFO but is rather bit-shifted or something is added. This problem does not occure if I execute the VI on the dev. PC with simulated input.
What I have done so far:
I am reading all 4 channels of the 5734 inside a SCTL. The data is stored in 4 feedback nodes I am applying a triangular shaping to channel 0 and 1 by using 4 FIFOs that have been prefilled with a predefined number of zeros to serve as buffers. So it's something like (FB = Feedback node):
A I/O 1 --> FB --> FIFO 1 --> FB --> FIFO 2 --> FB --> Do something
A I/O 2 --> FB --> FIFO 3 --> FB --> FIFO 4 --> FB --> Do something
This code shows NO weird behaviour and works as expected.
The Problem:
To reduce the amount of FIFOs needed I then decided to interleave the data and to use only 2 FIFOs instead of 4. You can see the code in the attachment. As you can see I have not really changed anything to the code structure in general.
The input to the FIFO is a U16. All FIFOs are configured to store U16 data.
The data that I am writing to the FIFO can be seen in channel 0 of the output attachment.
The output after passing through the two FIFOs can be seen in channel 2 of the same picture.
The output after passing through the first FIFO (times 2) can be seen in channel 3 of the picture.
It looks like the output is bit-shifted and truncated as it enters Buffer 1. Yet the difference between the input and output is not exactly a factor of 2. I also considered the possibility that the FIFO adds both write operations (CH0 + CH1) but that also does not account for the value of the output.
The FIFOs are all operating normally, i.e. none throws a timeout. I also tried several different orders of reading/writing to the FIFOs and different ways of ensuring this order (i.e. case strucutres, flat and stacked sequence). The FIFOs are also large enough to store the amount of data buffered no matter if I write or read first.
Thank you very much,
Bjorn
Attachments:
FPGA-code.png ‏61 KB
FPGA-output.png ‏45 KB

During the last couple of days I tried the following:
1. Running the FPGA code on the development PC with simulated I/O. The behavior was normal, i.e. like I've intended the code to perform.
2. I tested the code on the development PC with the square and sine wave generation VI as 'simulated' I/O. The code performed normal.
3. I replaced the FIFOs with queues and ran my logic on the dev. PC. The logic performed totally normal.
4. Right now the code is compiling with constants as inputs like you suggested...
I am currently trying to get LabView 2013 on the development machine. It seems like my last real hope is that the issue is a bug in the XILINX 13.4 compiler tools and that the 14.4 tools will just make it disappear...
Nevertheless I am still open for suggestions. Some additional info about my FIFOs of concerne:
Buffer 1 and 2:
- Type: Target Scoped
- Elements Requested: 1023
- Implementation: Block Memory
- Control Logic: Target Optimal
- Data Type: U16
- Arbitrate for Read: Never Arbitrate
- No. Elements Per Read: 1
- Arbitrate for Write: Never Arbitrate
- No. Elements Per Write: 1
The inputs from the NI 5734 are U16 so I am wirering the right data type to the FIFOs. I also don't have any coercion dots within my FPGA VI. And so far it has only occured after the VI has been compiled onto the FPGA. Could some of the FIFOs/block memory be corrupted because we have written stuff onto the FPGA too often?

Cisco ASA 5505 L2TP Pass through

I am having trouble with L2TP pass through on an ASA 5505 device.
L2TP server: OSX 10.6
I can connect with any OSX system and it works fine straight away.
When connecting with a windows computer I get a 789 error. "Error 789: The L2TP connection attempt failed because the security layer encountere a processing error during the initial negotiations with the remote computer."
I did not setup or configure the device to start with and apart from this issue its working fine so I am hessitant at trying to just mess around too much to try and find the problem.
I am using the ASDM 6.4 to manage the device.
Ports look to be forwarded correctly; 1701, 4500 & 500 UDP.
Im just looking for other common issues?
Rob

Below is the commands you wanted.
Where you see: IPNOTWHATIWASEXPECTING
This is an IP I dont know. possible and old IP address.
and
default-domain value domain-notcorrect.local
This is an old domain from years ago.
Result of the command: "show run crypto"
crypto ipsec transform-set aes-sha esp-aes esp-sha-hmac
crypto ipsec transform-set aes-192-sha esp-aes-192 esp-sha-hmac
crypto ipsec transform-set aes-256-sha esp-aes-256 esp-sha-hmac
crypto ipsec transform-set 3des-sha esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set transform-amzn esp-aes esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map map-dynamic 1 set pfs group5
crypto dynamic-map map-dynamic 1 set transform-set aes-256-sha aes-192-sha aes-sha 3des-sha
crypto dynamic-map map-dynamic 2 set pfs
crypto dynamic-map map-dynamic 2 set transform-set aes-256-sha aes-192-sha aes-sha 3des-sha
crypto dynamic-map map-dynamic 3 set pfs
crypto dynamic-map map-dynamic 3 set transform-set aes-256-sha aes-192-sha aes-sha 3des-sha
crypto dynamic-map map-dynamic 4 set transform-set aes-256-sha aes-192-sha aes-sha 3des-sha
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set peer IPNOTWHATIWASEXPECTING3
crypto map outside_map 1 set transform-set ESP-DES-SHA
crypto map outside_map 2 match address acl-amzn
crypto map outside_map 2 set pfs
crypto map outside_map 2 set peer IPNOTWHATIWASEXPECTING IPNOTWHATIWASEXPECTING
crypto map outside_map 2 set transform-set transform-amzn
crypto map outside_map 255 ipsec-isakmp dynamic map-dynamic
crypto map outside_map interface outside
crypto isakmp identity address
crypto isakmp enable outside
crypto isakmp policy 1
authentication pre-share
encryption aes-256
hash sha
group 5
lifetime 86400
crypto isakmp policy 2
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto isakmp policy 3
authentication pre-share
encryption aes-256
hash sha
group 1
lifetime 86400
crypto isakmp policy 11
authentication pre-share
encryption aes-192
hash sha
group 5
lifetime 86400
crypto isakmp policy 12
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto isakmp policy 13
authentication pre-share
encryption aes-192
hash sha
group 1
lifetime 86400
crypto isakmp policy 21
authentication pre-share
encryption aes
hash sha
group 5
lifetime 86400
crypto isakmp policy 22
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto isakmp policy 23
authentication pre-share
encryption aes
hash sha
group 1
lifetime 86400
crypto isakmp policy 31
authentication pre-share
encryption 3des
hash sha
group 5
lifetime 86400
crypto isakmp policy 32
authentication rsa-sig
encryption des
hash sha
group 1
lifetime 86400
crypto isakmp policy 33
authentication pre-share
encryption 3des
hash sha
group 1
lifetime 86400
crypto isakmp policy 34
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
Result of the command: "show run group-policy"
group-policy evertest internal
group-policy evertest attributes
dns-server value 10.100.25.252
vpn-idle-timeout 720
vpn-tunnel-protocol IPSec l2tp-ipsec
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
group-policy petero internal
group-policy petero attributes
dns-server value 10.100.25.252
vpn-idle-timeout 720
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
group-policy awsfilter internal
group-policy awsfilter attributes
vpn-filter value amzn-filter
group-policy vpnpptp internal
group-policy vpnpptp attributes
dns-server value 10.100.25.252
vpn-tunnel-protocol l2tp-ipsec
group-policy vanheelm internal
group-policy vanheelm attributes
dns-server value 10.100.25.252
vpn-idle-timeout 720
vpn-tunnel-protocol IPSec l2tp-ipsec
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
group-policy ciscoVPNuser internal
group-policy ciscoVPNuser attributes
dns-server value 10.100.25.10
vpn-idle-timeout 720
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
group-policy chauhanv2 internal
group-policy chauhanv2 attributes
dns-server value 10.100.25.252
vpn-idle-timeout 720
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
group-policy oterop internal
group-policy oterop attributes
dns-server value 10.100.25.252
vpn-idle-timeout 720
vpn-tunnel-protocol IPSec l2tp-ipsec
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
group-policy Oterop internal
group-policy Oterop attributes
dns-server value 10.100.25.252
vpn-idle-timeout 30
group-policy chauhanv internal
group-policy chauhanv attributes
dns-server value 10.100.25.252
vpn-idle-timeout 30
vpn-tunnel-protocol IPSec l2tp-ipsec
group-policy bnixon2 internal
group-policy bnixon2 attributes
dns-server value 10.100.25.252
vpn-idle-timeout 720
vpn-tunnel-protocol IPSec l2tp-ipsec
pfs enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpnsplittunnel
default-domain value domain-notcorrect.local
Result of the command: "show run tunnel-group"
tunnel-group ciscoVPNuser type remote-access
tunnel-group ciscoVPNuser general-attributes
address-pool vpnippool
default-group-policy ciscoVPNuser
tunnel-group ciscoVPNuser ipsec-attributes
pre-shared-key *****
tunnel-group petero type remote-access
tunnel-group petero general-attributes
address-pool vpnippool
default-group-policy petero
tunnel-group petero ipsec-attributes
pre-shared-key *****
tunnel-group oterop type remote-access
tunnel-group oterop general-attributes
address-pool vpnippool
default-group-policy oterop
tunnel-group oterop ipsec-attributes
pre-shared-key *****
tunnel-group vanheelm type remote-access
tunnel-group vanheelm general-attributes
address-pool vpnippool
default-group-policy vanheelm
tunnel-group vanheelm ipsec-attributes
pre-shared-key *****
tunnel-group chauhanv type remote-access
tunnel-group chauhanv general-attributes
default-group-policy chauhanv
tunnel-group Oterop type remote-access
tunnel-group Oterop general-attributes
default-group-policy Oterop
tunnel-group chauhanv2 type remote-access
tunnel-group chauhanv2 general-attributes
address-pool vpnippool
default-group-policy chauhanv2
tunnel-group chauhanv2 ipsec-attributes
pre-shared-key *****
tunnel-group bnixon2 type remote-access
tunnel-group bnixon2 general-attributes
address-pool vpnippool
default-group-policy bnixon2
tunnel-group bnixon2 ipsec-attributes
pre-shared-key *****
tunnel-group vpnpptp type remote-access
tunnel-group vpnpptp general-attributes
address-pool vpnippool
default-group-policy vpnpptp
tunnel-group IPNOTWHATIWASEXPECTING4 type ipsec-l2l
tunnel-group IPNOTWHATIWASEXPECTING4 ipsec-attributes
pre-shared-key *****
tunnel-group evertest type remote-access
tunnel-group evertest general-attributes
address-pool vpnippool
default-group-policy evertest
tunnel-group evertest ipsec-attributes
pre-shared-key *****
tunnel-group evertest ppp-attributes
authentication ms-chap-v2
tunnel-group IPNOTWHATIWASEXPECTING3 type ipsec-l2l
tunnel-group IPNOTWHATIWASEXPECTING3 ipsec-attributes
pre-shared-key *****
tunnel-group IPNOTWHATIWASEXPECTING2 type ipsec-l2l
tunnel-group IPNOTWHATIWASEXPECTING2 general-attributes
default-group-policy awsfilter
tunnel-group IPNOTWHATIWASEXPECTING2 ipsec-attributes
pre-shared-key *****
isakmp keepalive threshold 10 retry 3
tunnel-group IPNOTWHATIWASEXPECTING type ipsec-l2l
tunnel-group IPNOTWHATIWASEXPECTING general-attributes
default-group-policy awsfilter
tunnel-group IPNOTWHATIWASEXPECTING ipsec-attributes
pre-shared-key *****
isakmp keepalive threshold 10 retry 3
Result of the command: "show vpn-sessiondb detail remote filter protocol L2TPOverIPsec"
INFO: There are presently no active sessions of the type specified
Result of the command: "show vpn-sessiondb detail remote filter protocol L2TPOverIPsecOverNAT"
INFO: There are presently no active sessions of the type specified

Updated iPad 1 to IOS 5. When trying to restore my iPad from my backup it gets half way through and the iPad reboots and iTunes says "An error occurred while restoring this iPad (-1)"

Updated iPad 1 to IOS 5. When trying to restore my iPad from my backup it gets half way through and the iPad reboots and iTunes says "An error occurred while restoring this iPad (-1)"
I have tried to restore my contacts and company data at least 20 times and every time half way through THE iPAD REBOOTS! When it boots back up it is at the brand new iPad screen.
This makes me angry as I do not use the iPad for fun and games. I use it for business. My company data and records for the last year are gone. ALL of my out standing customer invoices are gone. ALL payments received are gone! ALL Business contacts and emails ARE GONE! All my company, personal email accounts and settings ARE GONE!
What am I supposed to do now? In 6 hours I have to get on the road and conduct business with a empty blank factory out of the box iPad. How am I supposed to know who owes me money or who has paid their bills Apple? All of my meetings and calendar dates are GONE!
Everything was supposed to be backed up and restored after the update!
Question???WHY DID YOU MAKE THIS UPDATE WIPE OUT ALL SETTINGS AND APPS ON THE iPAD??? All the other updates left everything on the iPad intact and ONLY upgraded the IOS,and when it was done everything was still there.
Yes! I have done everything. Rebooted computer, checked for updates, Hard booted iPad, Factory restored iPad to ios 5 twice, tried every usb port I have, unplugged all other usb components.
Everytime half way through "Restoring iPad from backup..." The iPad turns off shows a spinning circle then shows the Apple logo and takes me to the brand new iPad setup screen.
Apple, you have no idea the level of stress you have created today.....

Check the console app to see if there are any error messages. I had one app showing an issue (Pet Hotel) the error was (truncated):
ERROR: Restore message response: 102 rename error: File name too long (63) at path "/var/mobile/Library/SafeHarbor/com.pocketgems.tappethotel/Container/Documents/ savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHis tory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGa meHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/sa vedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHisto ry/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGame History/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/save dGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory /savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHi story/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedG ameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/s avedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHist ory/savedGameHistory/1313349538-pocket_gems_crash_report.txt" (MBErrorDomain/102)
I manually snyc'ed that particular app and then re-ran the restore and am now the proud owner of a working iphone. Not sure it is the same problem or app but looking in the console was the key!

How do I get my messages to come through on my ipad Via my mobile number? They always used to but I've had to change all my Apple ID if that has anything to do with it? In iMessages it will only take an email address!

How do I get my messages to come through on my ipad Via my mobile number? They always used to but I've had to change all my Apple ID if that has anything to do with it? In iMessages it will only take an email address!

Hi EmilyWick123!
Here is an article that will help you address this question about linking your Apple ID and phone number:
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/ht5538
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

How can I have each pass through a for loop communicate with a new indicator?

Hello,
I am using 16 color boxes to indicate how 16 channels are behaving. If a color box is blue, its respective channel is running correctly, red means it has failed etc. I am continuously checking each channel using a loop, and I wanted to update the channel colors every loop. I have made an array of 16 numbers corresponding to the color I wish to have (which are blue = running, red = failed, green = completed, black = not in use). However, I cannot find a way to pull these 16 numbers out of the array and to the color boxes short of 16 index arrays connected to the color boxes.
I understand how to convert each individual number to a color, I just don't know how to use a 16 times for loop to communicate with a different color box each pass through. Is there any way to do this or should I just go for brute force?
Thank you.
Solved!
Go to Solution.

Sorry I keep making new posts. Attached is an example i wrote up. There are three cases in the disabled structure, each has a different implementation of what i belive your specs are.
Tim Elsey
LabVIEW 2010, 2012
Certified LabVIEW Architect
Attachments:
update color box.vi ‏24 KB

Pass through credentials on ipad

Similar Messages

Maybe you are looking for