PASS THROUGH MAIN grrr!

I have just exported my imovie project onto idvd and decided to use the quite funky looking "Pass Through" theme. The problem is that although I can change the title, the words "Pass Through Main" keep scrolling across instead of the correct title. In the example version "Greece" ith scrolls as the title, how can I change this I am going mad!

I just tried it. I double clicked "Pass through Main" on the title screen, it turned "blue", I typed in Canada, and Canada scrolled across the screen. When I clicked the little arrow to reveal the chapter menu in the menu selection sidebar, Canada was already showing.
This was on my G4 laptop which I just updated to Tiger 10.4, QT 7.1.2 and iLife 6.0.2.
Terri

Similar Messages

  • How can I see how much data passes through my Time Capsule?

    I am thinking of using a cellular data plan at home. My current, rural internet provider is slow and unreliable. I use a MiFi as a backup and have 4G service which is much faster and rarely goes down. I need to see how much data is downloaded and uploaded to compare costs. All our data passes through my Time Capsule.

    A similar app to what Bob mentions is peakhour.. it works on any of the newer OS.
    https://itunes.apple.com/au/app/peakhour/id468946727?mt=12
    It is a good app. BUT.. fat ugly BUTT.. just the same as Bob has explained, it depends on SNMP to work.. and so due to apple removing a very useful and functional protocol from its airport range you can no longer use it. Bizarre.
    I strongly recommend a Netgear WNDR3800 (older model now but you can pick up one cheaply on ebay) and a 3rd party firmware called gargoyle. Apple delete my posts if I point you to it, so you will have to search yourself.
    Replace your tall TC with the Netgear as the main router.. bridge the TC to it and you can continue to use its wireless and for TM backups. The advantage is that gargoyle will not only measure everyones usage, by IP, it is able to set a quota on everyone using the net and you can set that quota for hourly, daily or weekly or monthly. It will track the usage and you can see at a glance what everyone has used.
    It is simple to load.. just like a standard firmware update. The interface is as clear as anyone can make it with such of lot of tools. And the actual router is powerful enough to provide excellent QoS and parental controls on top of measurements and quota.

  • Problem with "Pass Through Chapters" Theme

    I was searching old post to get some help and this one help a little but there was still one problem unanswered. I have highlighted in red;
    Nov 14, 2008 3:41 PM Re: Pass Through Theme problem
    Re: Pass Through Theme problemin response to Glo H
    My smaller text which appears in white says Scenes 1-6. The pass through text which is larger and has a different image in it says "Pass Through Chapters" and it rolls by while the smaller text stays put. I notice the image that shows through the pass through text is the same image I set on the main DVD screen. On that one my name of my disc roll past in giant see through letters. I like that but I just don't want that same effect on my chapters screens.
    Can the image behind the rolling text be changed to the current window and not the main menu image?

    Thanks for the tip and figured out to delete my "Scenes 1-6" that was automatically created when, in iMovie, I shared the movie to iDVD with chapters. The menu title text block doesn't like cut/paste and I had to retype the "Scenes 1-6" text for the motion/peek-through scrolling text to refresh.
    Hmmm, but how tricky is that and where is it mentioned in the help/faq files etc?
    cheers

  • "Pass Through Chapters" text

    I'm working with a movie I shot in August 2009 and it imported nicely and I even added a slide show. I'm using the "Pass Through" Theme.
    When I click on the main menu, where I list the options for the movie or the slideshow, whichever one I click on, the submenu has this really annoying scrolling text that says "Pass Through Chapters."
    How do I either get rid of that or alter the text to something more contextually appropriate?

    Rich, Hi and thanks.
    I did that on the main menu and the pass-through text there changed, but the sub-menu pass through text remains the same. When I try double clicking on that, the drop zone editor pops up but the text doesn't highlight

  • IDVD 08 Pass Through theme menu errors

    in iDVD 08 my menus for pass through are taking pictures from other menus and placing those in the pass through text when it should be just showing the background of the menu it's in. for example, where there is no text on my special features menu is the normal background. but when the text starts scrolling along the bottom, it isn't just see through to the picture behind it; it shows the background the main menu.
    anyone having this problem or know how to fix it??
    thanks

    Did you resolve your issue, because I have exactly the same problem?
    In iDVD 08 my menus for pass through are taking picture from the first menu I play and placing it in the pass through text when it should be just showing the background of the menu it's in.
    Is this a bug ?

  • IPSEC Pass through

    Does the airport extreme base support ipsec pass-through for the Cisco VPN client?
    ie Can I create a VPN from a workstation connected to the base?
    Thanks.

    Hello dweldon. Welcome to the Apple Discussions!
    Try the following...
    802.11n AirPort Extreme Base Station (AEBSn) – Cisco VPN Setup
    - Run the Admin Utility
    - Click on Internet
    - Click on DHCP
    - Add a DHCP reservation for the IP address that is assigned to the machine you are connecting via VPN
    - Click on NAT
    - Check the option Enable Default Host At and enter the IP Address that you made a reservation for in the previous step.
    - Click on Advanced (Main menu at top)
    - Click on Ports
    - Click the add button (bottom left)
    - Service=DO NOT CHANGE
    - Public UDP Port(s) = 1723,1701
    - Public TCP Port(s) = BLANK
    - Private IP address = Use address from Step 4
    - Private UDP Port(s) = 1723,1701
    - Private TCP Port(s) = BLANK
    - Click Continue
    - Give your setup a name, like Cisco VPN (call it what you want)
    - Click DONE
    - Click UPDATE

  • Does user traffic pass through Controller and Aironet 1030?

    Hi All,
    I want to beat out some questions that I cannot find exactly guideline in Cisco. I intend to implement 2 Airespace 2000 controller and some 1010s and one 1030 to my main office and branch office. At present, there is a 512kbps WAN link between this two office. So I don't want to let the traffic within the branch office to pass through the WAN link. Therefore, I intend to use the solution that 1 controller stay in main office to serve the 1010s in main office and 1 controller stay in remote office to serve the 1010s in remote office. But the remote site only needs 1 AP, thus I would like to use one 1030 to stay in branch office and 2 controller stay in main office to perform controller's redundancy. I would like to know Does the clients' traffic pass through the link between 1030 and controller as the same as 1010? I does very confuse whether 1030 has this feature because I found some blur instruction of 1030 in Cisco.
    Further, if I place one of the controller in remote office, how can I control the APs in remote office to choose the local controller instead of the controller in main office using Layer 3 discovery method? Does any know? Thanks!
    Jason,
    best regards,

    Hi Jason,
    Hopefully this info will clear this up for you;
    Q. Can I install an access point (AP) at a remote office and install a Cisco WLC at my headquarters? Does the Lightweight AP Protocol (LWAPP) work over a WAN?
    A. Yes, you can have the WLCs across the WAN from the APs. LWAPP works over a WAN. Use Remote Edge AP (REAP) mode. REAP allows the control of an AP by a remote controller that is connected via a WAN link. Traffic is bridged onto the LAN link locally, which avoids the need to unnecessarily send local traffic over the WAN link. This is precisely one of the greatest advantages of having WLCs in your wireless network.
    Note: Not all lightweight APs support REAP. For example, the 1030 AP supports REAP, but the 1010 and 1020 AP do not support REAP. Before you plan to implement REAP, check to determine if the APs support it. Cisco IOS Software APs that have been converted to LWAPP do not support REAP.
    Q. I want to set up the Cisco 1030 Lightweight Access Point (AP) with a Cisco WLC in Remote Edge AP (REAP) mode. In this mode, is all wireless traffic tunneled back to the WLC? Additionally, if the AP cannot contact the WLC, what happens to the wireless clients?
    A. The 1030 AP tunnels all WLC traffic (control and management traffic) to the WLC via Lightweight AP Protocol (LWAPP). All data traffic stays local to the AP. The 1030 REAP can only reside on a single subnet because it cannot perform IEEE 802.1Q VLAN tagging. As such, traffic on each service set identifier (SSID) terminates on the same subnet on the wired network. So, while wireless traffic may be segmented over the air between SSIDs, user traffic is not separated on the wired side. Access to local network resources is maintained throughout WAN outages.
    At times of WAN link outage, all WLANs except the first is decommissioned. Therefore, use WLAN 1 as the primary WLAN and plan security policies accordingly. Cisco recommends that you use a local authentication/encryption method, such as the Wi-Fi Protected Access (WPA) Pre-Shared Key (WPA-PSK), on this first WLAN.
    Note: Wired Equivalent Privacy (WEP) suffices, but this method is not recommended because of known security vulnerabilities.
    If you use WPA-PSK (or WEP), properly configured users are still able to gain access to local network resources even when the WAN link is down.
    From this doc;
    http://www.cisco.com/en/US/products/ps6366/products_qanda_item09186a008064a991.shtml
    Hope this helps!
    Rob
    Please remember to rate helpful posts.....

  • Data has changed after passing through FIFO?

    Dear experts,
    I am currently working on a digital triangular shaping using the 7966R FPGA + 5734 AI. I am using LabView 2012 SP1.
    Some days ago I have encountered a problem with my FIFOs that I have not been able to solve since. I'd be glad if somebody could point out a solution/ my error.
    Short description:
    I am writing U16 variables between ~32700-32800 to a U16 configured FIFO. The FIFO output does not coincide with the data I have been writing to the FIFO but is rather bit-shifted or something is added. This problem does not occure if I execute the VI on the dev. PC with simulated input.
    What I have done so far:
    I am reading all 4 channels of the 5734 inside a SCTL. The data is stored in 4 feedback nodes I am applying a triangular shaping to channel 0 and 1 by using 4 FIFOs that have been prefilled with a predefined number of zeros to serve as buffers. So it's something like (FB = Feedback node):
    A I/O 1  --> FB --> FIFO 1 --> FB --> FIFO 2 --> FB --> Do something
    A I/O 2  --> FB --> FIFO 3 --> FB --> FIFO 4 --> FB --> Do something
    This code shows NO weird behaviour and works as expected.
    The Problem:
    To reduce the amount of FIFOs needed I then decided to interleave the data and to use only 2 FIFOs instead of 4. You can see the code in the attachment. As you can see I have not really changed anything to the code structure in general.
    The input to the FIFO is a U16. All FIFOs are configured to store U16 data.
    The data that I am writing to the FIFO can be seen in channel 0 of the output attachment.
    The output after passing through the two FIFOs can be seen in channel 2 of the same picture.
    The output after passing through the first FIFO (times 2) can be seen in channel 3 of the picture.
    It looks like the output is bit-shifted and truncated as it enters Buffer 1. Yet the difference between the input and output is not exactly a factor of 2. I also considered the possibility that the FIFO adds both write operations (CH0 + CH1) but that also does not account for the value of the output.
    The FIFOs are all operating normally, i.e. none throws a timeout. I also tried several different orders of reading/writing to the FIFOs and different ways of ensuring this order (i.e. case strucutres, flat and stacked sequence). The FIFOs are also large enough to store the amount of data buffered no matter if I write or read first.
    Thank you very much,
    Bjorn
    Attachments:
    FPGA-code.png ‏61 KB
    FPGA-output.png ‏45 KB

    During the last couple of days I tried the following:
    1. Running the FPGA code on the development PC with simulated I/O. The behavior was normal, i.e. like I've intended the code to perform.
    2. I tested the code on the development PC with the square and sine wave generation VI as 'simulated' I/O. The code performed normal.
    3. I replaced the FIFOs with queues and ran my logic on the dev. PC. The logic performed totally normal.
    4. Right now the code is compiling with constants as inputs like you suggested...
    I am currently trying to get LabView 2013 on the development machine. It seems like my last real hope is that the issue is a bug in the XILINX 13.4 compiler tools and that the 14.4 tools will just make it disappear...
    Nevertheless I am still open for suggestions. Some additional info about my FIFOs of concerne:
    Buffer 1 and 2:
    - Type: Target Scoped
    - Elements Requested: 1023
    - Implementation: Block Memory
    - Control Logic: Target Optimal
    - Data Type: U16
    - Arbitrate for Read: Never Arbitrate
    - No. Elements Per Read: 1
    - Arbitrate for Write: Never Arbitrate
    - No. Elements Per Write: 1
    The inputs from the NI 5734 are U16 so I am wirering the right data type to the FIFOs. I also don't have any coercion dots within my FPGA VI. And so far it has only occured after the VI has been compiled onto the FPGA. Could some of the FIFOs/block memory be corrupted because we have written stuff onto the FPGA too often?

  • Cisco ASA 5505 L2TP Pass through

    I am having trouble with L2TP pass through on an ASA 5505 device.
    L2TP server: OSX 10.6
    I can connect with any OSX system and it works fine straight away.
    When connecting with a windows computer I get a 789 error.  "Error 789: The L2TP connection attempt failed because the security layer encountere a processing error during the initial negotiations with the remote computer."
    I did not setup or configure the device to start with and apart from this issue its working fine so I am hessitant at trying to just mess around too much to try and find the problem.
    I am using the ASDM 6.4 to manage the device.
    Ports look to be forwarded correctly; 1701, 4500 & 500 UDP.
    Im just looking for other common issues?
    Rob

    Below is the commands you wanted.
    Where you see: IPNOTWHATIWASEXPECTING
    This is an IP I dont know. possible and old IP address.
    and
    default-domain value domain-notcorrect.local
    This is an old domain from years ago.
    Result of the command: "show run crypto"
    crypto ipsec transform-set aes-sha esp-aes esp-sha-hmac
    crypto ipsec transform-set aes-192-sha esp-aes-192 esp-sha-hmac
    crypto ipsec transform-set aes-256-sha esp-aes-256 esp-sha-hmac
    crypto ipsec transform-set 3des-sha esp-3des esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
    crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
    crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
    crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
    crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
    crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
    crypto ipsec transform-set transform-amzn esp-aes esp-sha-hmac
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    crypto dynamic-map map-dynamic 1 set pfs group5
    crypto dynamic-map map-dynamic 1 set transform-set aes-256-sha aes-192-sha aes-sha 3des-sha
    crypto dynamic-map map-dynamic 2 set pfs
    crypto dynamic-map map-dynamic 2 set transform-set aes-256-sha aes-192-sha aes-sha 3des-sha
    crypto dynamic-map map-dynamic 3 set pfs
    crypto dynamic-map map-dynamic 3 set transform-set aes-256-sha aes-192-sha aes-sha 3des-sha
    crypto dynamic-map map-dynamic 4 set transform-set aes-256-sha aes-192-sha aes-sha 3des-sha
    crypto map outside_map 1 match address outside_1_cryptomap
    crypto map outside_map 1 set peer IPNOTWHATIWASEXPECTING3
    crypto map outside_map 1 set transform-set ESP-DES-SHA
    crypto map outside_map 2 match address acl-amzn
    crypto map outside_map 2 set pfs
    crypto map outside_map 2 set peer IPNOTWHATIWASEXPECTING IPNOTWHATIWASEXPECTING
    crypto map outside_map 2 set transform-set transform-amzn
    crypto map outside_map 255 ipsec-isakmp dynamic map-dynamic
    crypto map outside_map interface outside
    crypto isakmp identity address
    crypto isakmp enable outside
    crypto isakmp policy 1
    authentication pre-share
    encryption aes-256
    hash sha
    group 5
    lifetime 86400
    crypto isakmp policy 2
    authentication pre-share
    encryption aes-256
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 3
    authentication pre-share
    encryption aes-256
    hash sha
    group 1
    lifetime 86400
    crypto isakmp policy 11
    authentication pre-share
    encryption aes-192
    hash sha
    group 5
    lifetime 86400
    crypto isakmp policy 12
    authentication pre-share
    encryption aes-192
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 13
    authentication pre-share
    encryption aes-192
    hash sha
    group 1
    lifetime 86400
    crypto isakmp policy 21
    authentication pre-share
    encryption aes
    hash sha
    group 5
    lifetime 86400
    crypto isakmp policy 22
    authentication pre-share
    encryption aes
    hash sha
    group 2
    lifetime 86400
    crypto isakmp policy 23
    authentication pre-share
    encryption aes
    hash sha
    group 1
    lifetime 86400
    crypto isakmp policy 31
    authentication pre-share
    encryption 3des
    hash sha
    group 5
    lifetime 86400
    crypto isakmp policy 32
    authentication rsa-sig
    encryption des
    hash sha
    group 1
    lifetime 86400
    crypto isakmp policy 33
    authentication pre-share
    encryption 3des
    hash sha
    group 1
    lifetime 86400
    crypto isakmp policy 34
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    Result of the command: "show run group-policy"
    group-policy evertest internal
    group-policy evertest attributes
    dns-server value 10.100.25.252
    vpn-idle-timeout 720
    vpn-tunnel-protocol IPSec l2tp-ipsec
    pfs enable
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value vpnsplittunnel
    default-domain value domain-notcorrect.local
    group-policy petero internal
    group-policy petero attributes
    dns-server value 10.100.25.252
    vpn-idle-timeout 720
    pfs enable
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value vpnsplittunnel
    default-domain value domain-notcorrect.local
    group-policy awsfilter internal
    group-policy awsfilter attributes
    vpn-filter value amzn-filter
    group-policy vpnpptp internal
    group-policy vpnpptp attributes
    dns-server value 10.100.25.252
    vpn-tunnel-protocol l2tp-ipsec
    group-policy vanheelm internal
    group-policy vanheelm attributes
    dns-server value 10.100.25.252
    vpn-idle-timeout 720
    vpn-tunnel-protocol IPSec l2tp-ipsec
    pfs enable
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value vpnsplittunnel
    default-domain value domain-notcorrect.local
    group-policy ciscoVPNuser internal
    group-policy ciscoVPNuser attributes
    dns-server value 10.100.25.10
    vpn-idle-timeout 720
    pfs enable
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value vpnsplittunnel
    default-domain value domain-notcorrect.local
    group-policy chauhanv2 internal
    group-policy chauhanv2 attributes
    dns-server value 10.100.25.252
    vpn-idle-timeout 720
    pfs enable
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value vpnsplittunnel
    default-domain value domain-notcorrect.local
    group-policy oterop internal
    group-policy oterop attributes
    dns-server value 10.100.25.252
    vpn-idle-timeout 720
    vpn-tunnel-protocol IPSec l2tp-ipsec
    pfs enable
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value vpnsplittunnel
    default-domain value domain-notcorrect.local
    group-policy Oterop internal
    group-policy Oterop attributes
    dns-server value 10.100.25.252
    vpn-idle-timeout 30
    group-policy chauhanv internal
    group-policy chauhanv attributes
    dns-server value 10.100.25.252
    vpn-idle-timeout 30
    vpn-tunnel-protocol IPSec l2tp-ipsec
    group-policy bnixon2 internal
    group-policy bnixon2 attributes
    dns-server value 10.100.25.252
    vpn-idle-timeout 720
    vpn-tunnel-protocol IPSec l2tp-ipsec
    pfs enable
    split-tunnel-policy tunnelspecified
    split-tunnel-network-list value vpnsplittunnel
    default-domain value domain-notcorrect.local
    Result of the command: "show run tunnel-group"
    tunnel-group ciscoVPNuser type remote-access
    tunnel-group ciscoVPNuser general-attributes
    address-pool vpnippool
    default-group-policy ciscoVPNuser
    tunnel-group ciscoVPNuser ipsec-attributes
    pre-shared-key *****
    tunnel-group petero type remote-access
    tunnel-group petero general-attributes
    address-pool vpnippool
    default-group-policy petero
    tunnel-group petero ipsec-attributes
    pre-shared-key *****
    tunnel-group oterop type remote-access
    tunnel-group oterop general-attributes
    address-pool vpnippool
    default-group-policy oterop
    tunnel-group oterop ipsec-attributes
    pre-shared-key *****
    tunnel-group vanheelm type remote-access
    tunnel-group vanheelm general-attributes
    address-pool vpnippool
    default-group-policy vanheelm
    tunnel-group vanheelm ipsec-attributes
    pre-shared-key *****
    tunnel-group chauhanv type remote-access
    tunnel-group chauhanv general-attributes
    default-group-policy chauhanv
    tunnel-group Oterop type remote-access
    tunnel-group Oterop general-attributes
    default-group-policy Oterop
    tunnel-group chauhanv2 type remote-access
    tunnel-group chauhanv2 general-attributes
    address-pool vpnippool
    default-group-policy chauhanv2
    tunnel-group chauhanv2 ipsec-attributes
    pre-shared-key *****
    tunnel-group bnixon2 type remote-access
    tunnel-group bnixon2 general-attributes
    address-pool vpnippool
    default-group-policy bnixon2
    tunnel-group bnixon2 ipsec-attributes
    pre-shared-key *****
    tunnel-group vpnpptp type remote-access
    tunnel-group vpnpptp general-attributes
    address-pool vpnippool
    default-group-policy vpnpptp
    tunnel-group IPNOTWHATIWASEXPECTING4 type ipsec-l2l
    tunnel-group IPNOTWHATIWASEXPECTING4 ipsec-attributes
    pre-shared-key *****
    tunnel-group evertest type remote-access
    tunnel-group evertest general-attributes
    address-pool vpnippool
    default-group-policy evertest
    tunnel-group evertest ipsec-attributes
    pre-shared-key *****
    tunnel-group evertest ppp-attributes
    authentication ms-chap-v2
    tunnel-group IPNOTWHATIWASEXPECTING3 type ipsec-l2l
    tunnel-group IPNOTWHATIWASEXPECTING3 ipsec-attributes
    pre-shared-key *****
    tunnel-group IPNOTWHATIWASEXPECTING2 type ipsec-l2l
    tunnel-group IPNOTWHATIWASEXPECTING2 general-attributes
    default-group-policy awsfilter
    tunnel-group IPNOTWHATIWASEXPECTING2 ipsec-attributes
    pre-shared-key *****
    isakmp keepalive threshold 10 retry 3
    tunnel-group IPNOTWHATIWASEXPECTING type ipsec-l2l
    tunnel-group IPNOTWHATIWASEXPECTING general-attributes
    default-group-policy awsfilter
    tunnel-group IPNOTWHATIWASEXPECTING ipsec-attributes
    pre-shared-key *****
    isakmp keepalive threshold 10 retry 3
    Result of the command: "show vpn-sessiondb detail remote filter protocol L2TPOverIPsec"
    INFO: There are presently no active sessions of the type specified
    Result of the command: "show vpn-sessiondb detail remote filter protocol L2TPOverIPsecOverNAT"
    INFO: There are presently no active sessions of the type specified

  • How can I have each pass through a for loop communicate with a new indicator?

    Hello,
    I am using 16 color boxes to indicate how 16 channels are behaving.  If a color box is blue, its respective channel is running correctly, red means it has failed etc.  I am continuously checking each channel using a loop, and I wanted to update the channel colors every loop.  I have made an array of 16 numbers corresponding to the color I wish to have (which are blue = running, red = failed, green = completed, black = not in use).  However, I cannot find a way to pull these 16 numbers out of the array and to the color boxes short of 16 index arrays connected to the color boxes. 
    I understand how to convert each individual number to a color, I just don't know how to use a 16 times for loop to communicate with a different color box each pass through.  Is there any way to do this or should I just go for brute force?
    Thank you.
    Solved!
    Go to Solution.

    Sorry I keep making new posts.  Attached is an example i wrote up.  There are three cases in the disabled structure, each has a different implementation of what i belive your specs are.
    Tim Elsey
    LabVIEW 2010, 2012
    Certified LabVIEW Architect
    Attachments:
    update color box.vi ‏24 KB

  • New events in iCal are entered on my iMac.  These events pass through correctly to my other computers and iPhone.  However, each new event shows up twice on my iPads.  The clutter is distracting.  Anyone have suggestion as to correcting this annoyance?

    New events in iCal are entered on my iMac.  These events pass through correctly to my other computers and iPhone.  However, each new event shows up twice on my iPads.  The clutter is distracting.  Anyone have suggestion as to correcting this annoyance?

    New events in iCal are entered on my iMac.  These events pass through correctly to my other computers and iPhone.  However, each new event shows up twice on my iPads.  The clutter is distracting.  Anyone have suggestion as to correcting this annoyance?

  • USB Pass-Through From Windows 8.1 Host To Windows Server 2012 R2 VM

    I want to be able to connect with a Windows Mobile Device through Windows Mobile Device Center, within a Virtual Machine.  When connecting through the Hyper-V Manager and through Remote Desktop, under "Other supported RemoteFX USB devices",
    I can see the Symbol USB Sync Cradle.  In the VM, in Device Manager, I don't see a USB connection.  In the VM, I don't see any meaningful errors in the Event Viewer.
    Host:  Windows 8.1 Enterprise Hyper-V on a Domain.  Upgraded from Windows 8.1 Pro.  When this computer was originally installed with Windows 8 Pro, Hyper-V was enabled.  I removed Hyper-V, and installed VMWare Player, because I wanted
    USB Pass-through.  I then uninstalled VMWare and installed VirtualBox.  Recently, I uninstalled VirtualBox, upgraded to Windows 8.1 Enterprise, and enabled Hyper-V.
    Virtual Machine OS: Windows Server 2012 R2 on a Workgroup.  Started out with being a VMWare VM, using VMWare Player.  Moved to VirtualBox.  USB Pass-through was working in both those virtual environments.  Used Disk2VHD to convert the
    VM to a VHDX file.
    On the Host:
    Windows Mobile Device Center is connected to a Motorola Windows Mobile Device (MC959X) sitting in a Symbol USB Cradle.  The OS on the scanner is Windows Embedded Handheld 6.5 Classic CE OS 5.2.29217 (Build 29217.5.3.12.26).  Advanced Networking
    (USB to PC) is not enabled.
    Enabled RemoteFX. 
    In the RDP file, and in the Registry, added the GUID's for:
    WPD "{eec5ad98-8080-425f-922a-dabf3de3f69a}";
    Windows Mobile "{6AC27878-A6FA-4155-BA85-F98F491D4F33}";
    USB Device "{88BAE032-5A81-49f0-BC3D-A4FF138216D6}";
    Windows CE USB Device "{25dbce51-6c8f-4a72-8a6d-b54c2b4fc835}";
    GUID_DEVINTERFACE_USB_DEVICE "{A5DCBF10-6530-11D2-901F-00C04FB951ED}"
    Ran "sfc /scannow"
    All Microsoft Updates are current.
    What am I missing?

    I hope it's something like that. Those features have been installed.  Here's what PowerShell shows is installed:
    PS C:\Windows\system32> Get-WindowsFeature |Where {$_.Installed -eq "True"} | ft DisplayName, Installed
    DisplayName                                                                                                  
    Installed
    File and Storage Services                                                                                         
    True
    File and iSCSI Services                                                                                           
    True
    File Server                                                                                                       
    True
    Storage Services                                                                                                  
    True
    Remote Desktop Services                                                                                           
    True
    Remote Desktop Licensing                                                                                          
    True
    Remote Desktop Session Host                                                                                       
    True
    Web Server (IIS)                                                                                                  
    True
    Web Server                                                                                                        
    True
    Common HTTP Features                                                                                              
    True
    Default Document                                                                                                  
    True
    Directory Browsing                                                                                                
    True
    HTTP Errors                                                                                                       
    True
    Static Content                                                                                                    
    True
    HTTP Redirection                                                                                                  
    True
    Health and Diagnostics                                                                                            
    True
    HTTP Logging                                                                                                      
    True
    Performance                                                                                                       
    True
    Static Content Compression                                                                                        
    True
    Security                                                                                                          
    True
    Request Filtering                                                                                                 
    True
    Windows Authentication                                                                                            
    True
    Application Development                                                                                           
    True
    .NET Extensibility 3.5                                                                                            
    True
    .NET Extensibility 4.5                                                                                            
    True
    ASP.NET 3.5                                                                                                       
    True
    ASP.NET 4.5                                                                                                       
    True
    ISAPI Extensions                                                                                                  
    True
    ISAPI Filters                                                                                                     
    True
    Management Tools                                                                                                  
    True
    IIS Management Console                                                                                            
    True
    .NET Framework 3.5 Features                                                                                       
    True
    .NET Framework 3.5 (includes .NET 2.0 and 3.0)                                                                    
    True
    .NET Framework 4.5 Features                                                                                       
    True
    .NET Framework 4.5                                                                                                
    True
    ASP.NET 4.5                                                                                                       
    True
    WCF Services                                                                                                      
    True
    TCP Port Sharing                                                                                                  
    True
    Ink and Handwriting Services                                                                                      
    True
    Media Foundation                                                                                                  
    True
    Remote Server Administration Tools                                                                                
    True
    Role Administration Tools                                                                                         
    True
    Remote Desktop Services Tools                                                                                     
    True
    Remote Desktop Licensing Diagnoser Tools                                                                          
    True
    Remote Desktop Licensing Tools                                                                                    
    True
    SMB 1.0/CIFS File Sharing Support                                                                                 
    True
    User Interfaces and Infrastructure                                                                                
    True
    Graphical Management Tools and Infrastructure                                                                     
    True
    Desktop Experience                                                                                                
    True
    Server Graphical Shell                                                                                            
    True
    Windows PowerShell                                                                                                
    True
    Windows PowerShell 4.0                                                                                            
    True
    Windows PowerShell 2.0 Engine                                                                                     
    True
    Windows PowerShell ISE                                                                                            
    True
    WoW64 Support                                                                                                     
    True

  • Static NAT pass-through; can not get to work

    I am not having any luck getting a static NAT pass-through to work.
    BM3.8/NW6.5 all patched to the latest patches (no betas). IPFLT is NOT
    loaded.
    My internal network on one LAN all have 10.100.xxx.xxx private addresses.
    Dynamic NAT works great.
    I have secondary public IP addresses bound to my public NIC. Static NAT
    mapping between the secondary public IP addresses and the couple of
    individual private addresses work just fine. In other words, all has been
    working fine.
    I need to give one of those internal resources its public IP address
    (change it's private to its public).
    OK, I went into the NAT table and changed the proper public <-> private to
    public <-> public (identical addresses). I changed the internal computer
    to it's public address/mask with the same default gateway the server is
    using. The internal computer can now only ping itself; can't even ping
    it's default gateway. I did reinitialize, and also restarted. I can not
    get the pass-through connection to work.
    Any thoughts will be well received.
    Bob

    Robert,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Are there any tools from NI can generate the pass-through layer (IVI class driver) for IVI class specific driver?

    IVI class driver (layer) will provide interchangeable feature for a IVI class specific driver. It would work as a pass-through layer and finally make calls to the IVI class specific driver. Since there could be a lot of functions to be passed through. Are there any tools from NI (Labwindows/CVI or Labview) can do this ?
    Thanks a lot. 
    BTW: the IVI class specific driver interface is generated from Labwindows/CVI tools.

    Hi Chris,
    Yes, I did.  To support interchangability, from my understanding of the IVI specs, there should be another layer IVI-C class driver on top of this IVI class specific driver. As in the IVI‑3.1: Driver Architecture Specification:
    Although IVI‑C class drivers export inherent,
    base, and extension capabilities, they do not actually implement them. Except
    for a few inherent functions and attributes defined exclusively for class
    drivers, class driver functions and attributes provide a pass‑through layer to
    the IVI‑C specific driver. An IVI‑C specific driver is responsible for
    implementing the operations of functions and attributes and for communicating
    with the instrument. The IVI‑C specific instrument driver contains the
    information for controlling the instrument, including the command strings,
    parsing code, and valid ranges of each instrument setting"
    So where is this IVI-C class driver and how is it created and communicate with my class specific driver?
    Thanks a lot.
    Cheers,
    IVI‑3.1: Driver Architecture Specification

  • Xbox 360 - Optical line-in pass through 5.1 to optical line-out on an iMac?

    Hi guys, i'm in the market to purchase a new 5.1 surround sound system for my room and the following issue has been purplexing me.
    IS it possible to daisy chain my XBOX 360 to my iMac with optical cables and pass through 5.1 surround sound to the decoder on the sound system?
    So i'd have an optical cable from my xbox to the line-in on my iMac. I'd use Rogue Amoeba's Line-In app to pass the sound through to the optical line-out and through to the sound system.
    (I know it works using stereo sources, but i don't know about 5.1 digital sound.)
    I also know i could just connect them both to separate optical ports on the sound sytem, but i'm trying to listen to 2 sources at the same time. (5.1 from XBOX and music from iMac).
    Any thoughts on this are appreciated!

    I'm convinced things work like this:
    The SBX-Fi receives the encoded SPDIF.<
    The drivers decode it into the 5 digital audio signals. This siimply regenerates what was put into the encoding and has no effect on its "volume."<
    The 5 digital audio signals are sent to the SBX-Fi hardware, as is.<
    The signals are widened (not sure about the SBX-Fi, but for SBLi've-/SBAudigy-series card it's 32-bits with IIRC 4 bits for headroom, which is 24dB) at input by the SBX-Fi hardware. The additional headroom is probably able to handle most effects/mixing which might happen, but might produce a signal which would clip on output if the intermediate results produce a digital volume over 00%.<
    The master output volume operates on the output signals before they are narrowed.<
    The output signals are narrowed (dithered) and distributed.<
    If that's correct, it means you should be able to simply lower the master output volume in the soundcard mixer; and that presumes something's going on like high Crystalizer settings, or something; to elminate clipping distortion.
    -Dave
    ?[email protected]

Maybe you are looking for