Pass values between ssrs 2008 r2 reports

In a ssrs 2008 R2 report, I need to pass parameters to existing subreports that are currently called. Basically there is a main sssrs 2008 r2 report and there are 3 subreports. I would like subreports #1, subreport #2, and subreport #3 to receive
the value values of customer number and customer name. I am hoping you can tell me and/or show me code that would tell me how to add parameters parameter values that are used to call these subreports.

Hi wendy,
According to your description, it seems that you want to pass parameter values from main report to subreport1, from subreport1 to subreport2, and from subreport2 to subreport3. If in this scenario, you can refer to the following steps about the sample test
(from main report to subreport1) in my environment:
Create a parameter named ID in the main report, adjust the report body and tablix with the same size.
In the subreport1 report, right-click one cell to insert a subreport.
Right-click the subpeort to open the Subreport Properties, and select the main report name in the drop-down list.
In the left panel of the Subreport Properties dialog box, click Parameters.
Select ID in the drop-down list of Name, and select [ID] in the drop-down list of Value.
Considering your question, because I have create a parameter in the main report and specify the parameter in the subreport1, the main report will be passed by the parameter to subreport1.
If you have any other questions, please feel free to ask.
Thanks,
Katherine xiong
If you have any feedback on our support, please click here.
Katherine Xiong
TechNet Community Support

Similar Messages

Changing the value of a parameter that has been passed into an SSRS 2008 R2 report

I support 200+ reports that all use stored procedures and have many drill downs with built in URLs.
I want to do the below to avoid creating a brand new parameter that I will have to add to literally hundreds of places.
We have what I'll call Param1 that receives a value from the user. That Param1 is passed to the stored procedure(s) for the report and also embedded in any Action URLs for drill downs to other reports from that report. All works great.
Now I have a need to concatenate a string to whatever value they supplied which provides context for the environment in which they are running. The reason I want to do this instead of creating a new parameter is because I need this in all my reports
and as stated above I would have to make 100s of changes to make that happen. If I can figure out a way to concatenate a value to the existing Param1 value I can greatly reduce the number of changes.
I can't seem to be able to find a way to modify the value on an existing parameter that is passed into the report prior to report execution.
I get an error when I simply try to concatenate something to the parameter in its Default property.
I can't find a way to update a parameter value in the Report Code block. There don't appear to be any methods available on the Parameter Collection to set the value of a parameter.
Any ideas?
Thanks!
Nathan

Create a new parameter. Mark it internal, set it's value by expression to:
=User!UserId+"MyNewValue"
and pass it to the proc?
Don't forget to mark helpful posts, and answers. It helps others to find relevant posts to the same question.

Navigate between 2 reports and pass values between 2 different columns

Hello
I have a question about navigating from 1 report to another while passing the value from column 1 to column 2 in the second report...
In OBIEE 11G, I create action link on report 1, column 1 and this action link is navigate to BI Content and the destination is report 2. Now report 2 has column 2, which is an alias of column 1 from report 1, from user's point of view they are the same, but from OBIEE point of view they are different.
My action link is able to navigate to report 2, however, the value in column 1 which I clicked to execute the navigation, does not get passed to column 2 in report 2..
Is there a way around this issue?
Let me know if I need to provide more clarification
Thanks

Thank you Anirban
I think this is the best solution you just provided.The current post and the post at below looks same
Navigate from report to dashboard and pass values between different column
is it not answered?
Thanks :)
Edited by: Srini VEERAVALLI on May 7, 2013 3:07 PM

Ssrs 2008 r2 report dataset call a stored procedure

I am modifying an existing SSRS 2008 r2 report. In a dataset that already exists within the ssrs 2008 r2 report I need execute
a stored procedure called StudentData and pass 3 parameter values to the stored procedure. The stored procedure will then return 5 values that are now needed for the modified ssrs report. My problem is I do not know how to have the dataset call the stored procedure
with the 3 parameter values and pass back the 5 different unique data values that I am looking for.
The basic dataset is the following:
SELECT SchoolNumber,
        SchoolName,
        StudentNumber,
from [Trans].[dbo].[Student]
order by SchoolNumber,
          SchoolName,
          StudentNumber
I basically want to pass the 3 parameters of SchoolNumber, SchoolName, and StudentNumber to the
stored procedure called StudentData from the data I obtain from the [Trans].[dbo].[Student]. The 3 parameter values will be obtained from the sql listed above.
The columns that I need from the stored procedure called StudentData will return the following data columns
that I need for the report: StudnentName, StudentAddress, Studentbirthdate, StudentPhoneNumber, GuardianName.
Thus can you show me how to setup the sql to meet this requirement I have?

Hi wendy,
After testing the issue in my local environment, we can refer to the following steps to achieve your requirement:
Create three multiple parameters named SchoolNumber, SchoolName and StudentNumber in the report. Those available values from the basic dataset SchoolNumber, SchoolName and StudentNumber fields.
If you want to pass multiple values parameter to stored procedure, we should create a function as below to the database:
CREATE FUNCTION SplitParameterValues (@InputString NVARCHAR(max), @SplitChar VARCHAR(5))
RETURNS @ValuesList TABLE
param NVARCHAR(255)
AS
BEGIN
DECLARE @ListValue NVARCHAR(max)
SET @InputString = @InputString + @SplitChar
WHILE @InputString!= @SplitChar
BEGIN
SELECT @ListValue = SUBSTRING(@InputString , 1, (CHARINDEX(@SplitChar, @InputString)-1))
IF (CHARINDEX(@SplitChar, @InputString) + len(@SplitChar))>(LEN(@InputString))
BEGIN
SET @InputString=@SplitChar
END
ELSE
BEGIN
SELECT @InputString = SUBSTRING(@InputString, (CHARINDEX(@SplitChar, @InputString) + len(@SplitChar)) , LEN(@InputString)-(CHARINDEX(@SplitChar, @InputString)+ len(@SplitChar)-1) )
END
INSERT INTO @ValuesList VALUES( @ListValue)
END
RETURN
END
Use the query below to create a stored procedure, then use it to create a dataset to return 5 values:
create proc proc_test(@SchoolNumber nvarchar(50),@SchoolName nvarchar(50),@StudentNumber nvarchar(50))
as
begin
select StudnentName, StudentAddress, Studentbirthdate, StudentPhoneNumber, GuardianName
from table7 where SchoolNumber in (SELECT * FROM SplitParameterValues (@SchoolNumber,',')) and SchoolName in(SELECT * FROM SplitParameterValues (@SchoolName,',')) and StudentNumber in (SELECT * FROM SplitParameterValues (@StudentNumber,','))
end
Right-click the new dataset to modify the parameter value in the Parameters pane as below:
=join(Parameters!SchoolNumber.Value,",")
=join(Parameters!SchoolName.Value,",")
=join(Parameters!StudentNumber.Value,",")
For more details about pass multi-value to stored procedure, please see:
http://munishbansal.wordpress.com/2008/12/29/passing-multi-value-parameter-in-stored-procedure-ssrs-report/
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

How to pass value between models?

Dear all,
I use VC 7.0 composer to create dashboards. That include one overview dashboard (model) to show seven KPI in one screen and I also have seven detailed dashboards (models) to show the detail of each KPI. Each dashboard has their own iView . User will only need to pick a plant once at the overview dashboard and I expect the plant value will be passed to other seven detailed dashboards.
Since those dashboards are saved in different models, I just wonder is it possible I can pass the value from the overview dashboard model to the separated detailed dashboard models? The reason I donu2019t put all dashboards in one model because I need to have different reports assigned on the left of the screen for each dashboard in portal. If I need to accomplish this in portal, I believe I need separate iView(model) for each dashboard. Please correct me if I am wrong since I am new to portal development. Thanks.

I think it is possible to pass values between models.
Just creat on "Write-RFC" and one "Read-RFC"
The RFC has just the function to write/read a value into an customer table...
^^ We have tried this scenario and it works perfect.
Regards
Florian

Pass values between pages

Hello experts!
I am trying to pass value between two pages without page submit.
I set item value from first page to session state by dynamic action. Then I am trying to pass this value to second page, I use button which redirects to second page and sets item value on second page with value from first page.
But approach this does not woks as I expected. The value from the first page is not passed to the second page when I click on button. Value is passed to the second page only if I:
1. set some value to item on first page (e.g. XX);
2. click on button which redirects to the second page;
3. get back to first page;
4. set some new value to the item (e.g. YY);
5. click on button;
6. then the first value from session state is passed to sthe econd page (value XX)
Could anybody tell me where I make a mistake, or what is wrong in my solution?
Test appl.
www.apex.oracle.com
http://apex.oracle.com/pls/apex/f?p=9027:LOGIN_DESKTOP:6946284921064
workspace: kurintest
username: [email protected]
passwd: kurintest
appl: 9027 pass_value
Thanks in advance!
Jiri

Jiri N. wrote:
Hello experts!
I am trying to pass value between two pages without page submit.
I set item value from first page to session state by dynamic action. Then I am trying to pass this value to second page, I use button which redirects to second page and sets item value on second page with value from first page.
But approach this does not woks as I expected. The value from the first page is not passed to the second page when I click on button. Value is passed to the second page only if I:
1. set some value to item on first page (e.g. XX);
2. click on button which redirects to the second page;
3. get back to first page;
4. set some new value to the item (e.g. YY);
5. click on button;
6. then the first value from session state is passed to sthe econd page (value XX)
Could anybody tell me where I make a mistake, or what is wrong in my solution?A redirect button and it's target URL—including items to be set and their values—are rendered on page show, in this case before <tt>P2_ITEM1</tt> has a value. Look at the page source when the page is first rendered:
<input type="button" value="Button1"onclick="apex.navigation.redirect('f?p=9027:3:11397156385140::NO:RP,3:P3_ITEM1:');" id="P2_BUTTON1" />No value substituted for <tt>&P2_ITEM1.</tt> in the URL.
Why do you want to navigate between these pages without a page submit? As APEX has to render page 3 anyway, why not submit and branch?

Pass Values between two Function Modules RFC in Portal

I need to pass values between 2 FM RFC.
I have an implicit enhancement in HRMSS_RFC_EP_READ_GENERALDATA RFC function module.
PERNR LIKE PSKEY-PERNR
ENHANCEMENT 1 Z_ESS_EXPORT_PERNR.    "active version
EXPORT pernr to memory id 'PMK'.
set parameter id 'PMK' field pernr.
ENDENHANCEMENT.
On the other hand an RFC function module that has the code:
        pmk    LIKE PSKEY-PERNR,
        pmk_2 LIKE PSKEY-PERNR.
get parameter id 'PMK' field pmk.
IMPORT pmk_2 FROM MEMORY ID 'PMK'.
When the execution is done in development environment, the modules function at the level of R3, the "get parameter id" works only if the debbuger is classic, otherwise not work. The Import to memory id never works.
In the environment of quality, r3 do not work any of the 2 sentences. If run from portal (which is as it should be) does not work.
Thanks if anyone can help me get the problem. Both function modules are executed at the portal.
Regards
Edited by: Daynet1840 on Feb 15, 2012 2:02 AM

When the execution is directly in r3, in development environment or quality, does the set / get parameter id. Export / Import memory id not work.
But if the FM are called from the portal, does not the set / get parameter id.
I tried changing the sentence as I indicated harishkumar.dy still not working.
Madhu: They're in different function groups, one is standard and the other not.
Regards
Edited by: Daynet1840 on Feb 15, 2012 3:08 PM
Edited by: Daynet1840 on Feb 15, 2012 3:11 PM

Pass values between panels in different UI files

Hi All,
Is there a way to pass values between panels belonging to User Interface files ? Or is it easier to have one .uir and different .c and .h files ?
Thanks,
Kanu

I should say that it's not possible for you to trap events from the first popup,and this depends on the basic concept of "popup panel".
When you install a popup panel, all user interaction with existing panels is excluded: all focus it aimed at the popup only, no other user interface event is generated. If you launch another popup from the first one, the second popup prevails over the first one and no event can be generated on the first panel until the second one is closed.
Handling a chain of two popup panels while looping on GetUserEvent can lead to unpredictable situation not so easy to untangle.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Passing values between event structure cases

Hello everybody,
I have a question concerning the event structure - how to pass values (let's say a string / the state of a boolean control / the value of a numeric control value / an array of numeric values) between event cases ?
There seem to be 2 situations here :
- when you need to pass the value of the control that triggers an event;
- when you need to pass the value of a control which is modified in an event case.
I have read the documentation but i still do not understand very clearly how to do this. Maybe you can point me in the right direction (maybe some threads on the forum that i have missed).
Thank you very much !!
(KUDOS for everyone who is interested in this )

AndreiN2014 wrote:
- when you need to pass the value of the control that triggers an event;
- when you need to pass the value of a control which is modified in an event case.
The first question isn't worded very well. What exactly are you looking to do? Are you looking for an event that specifically relates to that control? If so, just drop it inside of the event and wire it. Are you looking to trigger multiple events from the same control? Ie, you hit the control, event1 is triggered which then triggers event2 ... ? If so, you might consider taking a look at a different architecture. I can think of very few cases where I'd prefer do this over something like having the button trigger a state and using the state machine architecture.
Others have pointed out the Shift Register. This is the typical way to pass values between one iteration of a loop to another. We can assume you have some sort of loop outside of the event structure to make it run a second time. Put a shift register on this loop and the value wired into it will pass each iteration. But, if it's just a random control, you can also just leave that outside of the event structure and wire it in as well. This will provide the new value to the next occurrence of the event structure.
You really need to define your problem before trying to solve it.

Use context to pass value between JPF and Java Control

hi,
Can we use context to pass value between JPF and Java Control? It works if i m using InitialContext in the same machine but i dun think it will works if i put Web server and application server in different machine. Anyone have an idea how to do it?
I also want to get the method name in the onAcquire callback method. Anyone knows how to do this?
thks
?:|

Hi.
Yoy can the next options for make this:
1. Pass your values in http request.
example: http://localhost/index.jsp?var1=value1&var2=value2&var3....
2. You can use a no visible frame (of height or width 0) and keep your variables and values there using Javascript, but of this form, single you will be able to check the values in the part client, not in the server. Of this form, the values of vars are not visible from the user in the navigation bar.
Greeting.

How to pass values between views in FPM - GAF

Hi Experts ,
i have a doubt in FPM how to pass values between views .
For Example: i am having 2 views - 1 ) overview , 2 ) edit using the GAF
in 1st view (overview ) i have a table displaying the employee details , i will select a single employee from that table for editing .
how to pass the selected employee details to the 2 nd view (edit ) .
Thanks & regards
chinnaiya P

Hi chinnaiya pandiyan,
Please follow below steps:
1. To achieve this u need to create two context nodes in the component controller.
2. Say one is EMPLOYEE_DATA and other is SELECTED_DATA.
3. Set the Cardinality of EMPLOYEE_DATA to 0..n and SELECTED_DATA to 1..1.
4. Add same attributes to both nodes. (probably all those fields that are required in table and/or in edit view.
5. Map both these nodes to OVERVIEW view.
6. Map only SELECTED_DATA node to EDIT view.
7. Create table in OVERVIEW view based on EMPLOYEE_DATA node.
8. Create edit form in EDIT view based on SELECTED_DATA node.
9. While navigating from OVERVIEW view to EDIT view, read the selected element of EMPLOYEE_DATA node and copy it to an element of SELECTED_DATA node. This should be written in PROCESS_EVENT method of component controller inherited from FPM component.
10. Now u got the selected data in SELECTED_DATA node which will be displayed in EDIT view.
Regards,
Vikrant

Passing values between jsp and php

hi there, is it possible to pass values between jsp and
php? i really need to find out the way if there is
any. thanks in advance
-azali-

Yes, there are a few ways to do this.
1) Think about using Cookies.
2) Maybe use a Redirect passing the values in the Query string.
3) Retain the data in a repository in the back end.
4) Using Hidden fields within your pages.
I am sure you can use these Idea's for a base to develop other methods on how to pass values back and forth from JSP -> PHP and vice versa.
-Richard Burton

How to pass value between two forms.

Hi all,
how to pass value between two forms(using :parameter),...
Thanks
Rajesh

To use parameters, create a parameterlist with the named parameters
DECLARE
pl_id PARAMLIST;
pl_name VARCHAR2(10) := 'tempdata';
BEGIN
pl_id := Get_Parameter_List(pl_name);
IF not Id_Null(pl_id) THEN
DESTROY_PARAMETER_LIST(pl_id);
END IF;
pl_id := Create_Parameter_List(pl_name);
ADD_PARAMETER (pl_id,'MYPARAMETER',TEXT_PARAMETER,:BLOCK.VALUE);
CALL_FORM('MYNEWFORM', NO_HIDE, DO_REPLACE, NO_QUERY_ONLY, pl_id);
END;In the new form you can then just access the parameters via :PARAMETER.MYPARAMETER;
An alternative is the usage of globals:
:GLOBAL.MYPARAM:=:BLOCK.VALUE;
-- call the emp-form
CALL_FORM('MYNEWFORM', NO_HIDE, DO_REPLACE);and in the new form use:
DEFAULT_VALUE(NULL, 'GLOBAL.MYPARAM');
IF :GLOBAL.MYPARAM IS NOT NULL THEN
...The advantage of gloabls is that they can also return values back to the calling form, which is not possible using parameters

Pass value between JSP pages

I would like to pass values between pages.
I don't want showing up on the url. Ex: some.jsp?param=value
I don't feel it's safe.
It's not coming from form either....
How can I hide the value and pass it to next page?
I want to pass the value when the user click on a hyperlink
Thanks In Advance.
Message was edited by:
Theepan

Client side information is never safe no matter what you do. If the values don't end up in the url, they are always present SOMEWHERE in the html content.
If you don't want the values to end up in the url, rework the page so it DOES do a post form submit. You could turn the hyperlink into a javascript call that submits the form for you.

Forms6i- how do i pass values between two forms

Forms6i- passing values between forms
I have two forms. FORM1 does a call_form to FORM2.
How do i send values from FORM1 over to FORM2?
I want the 2 values in FORM1 to be passed top FORM2 and displayed as a TEXT ITEM.
But i don't know what is involved in passign vales between forms.

Define Parameters in Form2, and pass parameters with the same name from Forms1 with the parameter list option of your call_form built-in.
It is in the online help.

Pass values between ssrs 2008 r2 reports

Similar Messages

Maybe you are looking for