Pass word required for public files?

I just published a link to acrobat.com so that anyone in the
public could view the file. When it opened it required a password
and user name. I thought the idea of anyone being able to view
which I have selected would be so that it would open directly.
Thank you.

What type of file is it and what permissions did you set on
the file? There shouldn't be a password required to view files like
PDFs, but you may be required to login for some files that cannot
be viewed and only downloaded (ZIP files for instance).

Similar Messages

How to make a category required for all files created within a folder

I've defined a category. It has attributes which have been flagged as required.
When I view the properies of a particular workspace (library), the category is shown as available to the workspace. However, the category is not shown as required. And the "required" checkbox is not clickable.
So .. how, from the OCS DHTML applet, do I make a particular category a required category for all files in a folder?

Perhaps the Category Attribute is not marked as "configurable" when it was created. You can check this by "switching into Admin Mode" and drilling down the Categories using "Manage Categories" link. Check if the category attribute is marked as configurable or not.
Ravikiran

Requirement for Idoc-- File

I am Doing Idoc----->File mean R/3 -
> Legasy.(at Receiver side save File as idoc no)
I want save the file name with number of Idoc(Receiver side).

Follow the steps that is for dynamic file name ... using udf in message mapping in IR and adapter specific mesage attributes in ID
In the UDF,
1. for file name == tGIve the name of the IDOC
File propery--- Give the Source /IDOC field name which contains the IDOC number
when performing mapping map Source field (Field that contains IDOC number)->UDF--> Target/File root node..

Please advise a novice computer artist on system requirements for large files in PS ?

I am researching my next computer.
I am an artist currently using CS2 to rework my paintings into prints.
http://s719.photobucket.com/albums/ww198/blueridernz/Rachel%20Thompson%20Portfolio/?albumv iew=slideshow
The paintings have been scanned at a high resolution and are 500MB.
The image files I work with are large but the process simple, I am extracting and collaging.
Nothing too technical here.
As I will be printing large, 9' x 4', the end result file could be 2GB which I understand is the limit for PSD files.
I am not gaming or editing video files, just working with large images.
From what I have read I believe I need
i7 Core
12 GB RAM set of 3
GeForce GTX 460
Any advice truly appreciated,
Rachel.

The graphics card is perhaps a bit of overkill, if you really just paint and touchup in PS. A less power hungry and cheaper model would do just fine. The rest should do just fine, but keep in mind that all this is not going to do much good if you don't get a 64bit operating system and possibly also upgrade to CS5 to make use of all these resources. You might not even be able to install CS2 under Windows 7...
Mylenium

Can't Save Microsoft Word & Excel for MAC files

Has anyone encounter the software bug that prevent you from saving Microsoft for Word .doc and Excel workbook files to a USB drive attached to the Airport Extreme. After numerous conversations with level 2 technical support and a visit to the Apple Store where we recreated the problem with different Apple components, they confirmed there is a bug in their Airport Extreme Disk utility software. If you run into this problem, here is the solution:
Under the Apple icon, select Go, Connect to Server. Under the drive address, type smb://10.0.1.1 This solves the problem. Delete the Airport Disk utility software from the startup program list and add the network drive associated with the smb server address into the startup file to automatically attach to the network when you log in.

This is a well known issue and has been discussed in several threads. Here are a few:
MS Word can't save to Airport Disk
MS Word doesn't want to save docs to Airport Extreme connected HD
Problems saving excel doc on USB AirPort disk
Saving to external HD on USB
Airport Extreme and External Hard Drive with Word

How to change the "Download" word indicated for a File browse item ?

Hi,
I have a File Browse item. It displays "Download". And works fine too ! i want to change the Message "Download" by "Télécharger". Where can I find this ?
Thank you for your kind help !
Christian

Hello Christian,
If you are referring to the DOWNLOAD on an interactive report that is set to download a blob (for example), you can change the word Download to be anything you wish in the Download Format Mask. The very last entry is the Download Message.
DOWNLOAD:TABLE_NAME:BLOB_CONTENTS_COLUMN:PRIMARY_KEY_1:PRIMARY__KEY_2:MIME_Type_COlumn:FILENAME_COLUMN:LAST_UPDATE_DATE:CHARACTER_SET:CONTENT_DISPOISITION:DOWNLOAD_LINK_TEXT
For example:
DOWNLOAD:TABLE_Of_CONTENTS:TOC_PAGES:BOOK_ID:::PDF_FILENAME:MOD_DATE::ATTACHMENT:Click Here To Download This Book
The message "Click Here To Download This Book" will appear for each link.
Good luck,
Don.
You can reward this reply by marking it as either Helpful or Correct :)

DMS Setting required for GOS file transfer.???

Hi
I attaching file in Purchase requestion document using GOS in ERP6.0, now i would like to transfer attachment to shopping cart of SRM7.0. How to transfer the document from ERP to SRM system.
Need to change any customizing or Standard BAPI or BADIs. Pls advice.
Any setting for DMS need to be done.?
Regards
Ckumar
Edited by: princeck on Nov 12, 2010 5:32 AM

Thanks
Understood that GOS file transfer cannot be done using standard in DMS

Basic help required for multiple files to be opened from Bridge to PS

Hi
I am attempting to shave off a few hours from my workflow and because I'm new to Bridge I'm unsure how to do this. I'm pretty sure anyone out there with a small working knowledge of Bridge or CS3 could help me.
I am attempting to open three instances of the same RAW file into CS3 from Bridge. The three instances, although the same image, need to go through CameraRaw and change the exposure. One normally exposed, one +2 exposure and one -2 exposure. As you may have worked out I am attempting a pseudo-hdr effect with the one RAW file.
How do I, with just one click, open the file three times, change the exposure each time, and then save the differently exposed files as tiffs?
If it's ImageProcessor that I need to use then I'll admit I can't quite work out the rules for doing this!
Any help gratefully received.

Have a look at this thread.....
http://forums.adobe.com/thread/623234?tstart=30

Word 2010 to PDF hyperlink opens browser for local file...

Recently upgraded to Office 2010. I used the Save As .pdf option in Word 2010 for a file that contains a hyperlink to a local pdf file. When I open the saved pdf file with Acrobat Reader and click on the link, my default browser starts up to display the local file. I have tried using different versions of Acrobat Reader, different operating systems, and all kinds of options, but can't figure out why this is happening. I think it's a bug in Word 2010, but can't find any information about this on the web.
Does anyone have any clues?

OK, replying to my own post, I did just find a Workaround
that's only a few extra steps.....
After all edits and changes were completed in the Word file, I printed to PDF from Word,
creating a Rev A file. Once that was done and a new pdf was created, I opened the
Original File and selected "Combine" from the "File" pull down menu.
With both of the files in the same PDF document, I deleted all the pages from the
Original file. Page one of the Rev A file is now p. 1 of the "combined" file,
and all the PDF bookmarks (still there from the Original File) line up in the right
sequence. The bookmarks (produced by "Saving to PDF" with Headings 1 and 2,
when the original PDF was made) need to be re-linked to the pages in the Rev A
file, but that's quicker than starting from scratch.
Not really very elegant, but it worked. I'd be curious to know what's wrong with the
PDF files saved with bookmarks in WORD, because that happens EVERY time.
I have Acrobat Pro Extended, iteration 9.5.1

Golden Gate for flat file

hi,
I have tried with GoldenGate for Oracle/ non-Oracle databases. Now, I am trying for flat file.
What i have done so far:
1. I have downloaded Oracle "GoldenGate Application Adapters 11.1.1.0.0 for JMS and Flat File Media Pack"
2. Kept it on the same machine where Database and GG manager process exists. Port for GG mgr process 7809, flat file 7816
3. Following doc GG flat file administrators guide Page 9 --> configuration
4. Extract process on GG manager process_
edit params FFE711*
extract ffe711
userid ggs@bidb, password ggs12345
discardfile E:\GoldenGate11gMediaPack\V26071-01\dirrpt\EXTFF.dsc, purge
rmthost 10.180.182.77, mgrport 7816
rmtfile E:\GoldenGate11gMediaPack\V26071-01\dirdat\ffremote, purge, megabytes 5
add extract FFE711, EXTTRAILSOURCE ./dirdat/oo*
add rmttrail ./dirdat/pp, extract FFE711, megabytes 20*
start extract FFE711*
view report ffe711*
Oracle GoldenGate Capture for Oracle
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
Windows (optimized), Oracle 11g on Apr 22 2011 03:28:23
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2011-11-07 18:24:19
Operating System Version:
Microsoft Windows XP Professional, on x86
Version 5.1 (Build 2600: Service Pack 2)
Process id: 4628
Description:
** Running with the following parameters **
extract ffe711
userid ggs@bidb, password ********
discardfile E:\GoldenGate11gMediaPack\V26071-01\dirrpt\EXTFF.dsc, purge
rmthost 10.180.182.77, mgrport 7816
rmtfile E:\GoldenGate11gMediaPack\V26071-01\dirdat\ffremote, purge, megabytes 5
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 1G
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1.77G
CACHESIZEMAX (strict force to disk): 1.57G
Database Version:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production
Database Language and Character Set:
NLS_LANG environment variable specified has invalid format, default value will b
e used.
NLS_LANG environment variable not set, using default value AMERICAN_AMERICA.US7A
SCII.
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "AL32UTF8"
Warning: your NLS_LANG setting does not match database server language setting.
Please refer to user manual for more information.
2011-11-07 18:24:25 INFO OGG-01226 Socket buffer size set to 27985 (flush s
ize 27985).
2011-11-07 18:24:25 INFO OGG-01052 No recovery is required for target file
E:\GoldenGate11gMediaPack\V26071-01\dirdat\ffremote, at RBA 0 (file not opened).
2011-11-07 18:24:25 INFO OGG-01478 Output file E:\GoldenGate11gMediaPack\V2
6071-01\dirdat\ffremote is using format RELEASE 10.4/11.1.
** Run Time Messages **
5. on Flat file GGSCI prompt-->_*
edit params FFR711*
extract ffr711
CUSEREXIT E:\GoldenGate11gMediaPack\GGFlatFile\V22262-01\flatfilewriter.dll CUSEREXIT passthru includeupdatebefores, params "E:\GoldenGate11gMediaPack\GGFlatFile\V22262-01\sample-dirprm\ffwriter.properties"
SOURCEDEFS E:\GoldenGate11gMediaPack\V26071-01\dirdef\vikstkFF.def
table ggs.vikstk;
add extract ffr711, exttrailsource ./dirdat/pp*
start extract ffr711*
view report ffr711*
Oracle GoldenGate Capture
Version 11.1.1.0.0 Build 078
Windows (optimized), Generic on Jul 28 2010 19:05:07
Copyright (C) 1995, 2010, Oracle and/or its affiliates. All rights reserved.
Starting at 2011-11-07 18:21:31
Operating System Version:
Microsoft Windows XP Professional, on x86
Version 5.1 (Build 2600: Service Pack 2)
Process id: 5008
Description:
** Running with the following parameters **
extract ffr711
CUSEREXIT E:\GoldenGate11gMediaPack\GGFlatFile\V22262-01\flatfilewriter.dll CUSE
REXIT passthru includeupdatebefores, params "E:\GoldenGate11gMediaPack\GGFlatFil
e\V22262-01\sample-dirprm\ffwriter.properties"
E:\GoldenGate11gMediaPack\GGFlatFile\V22262-01\ggs_Windows_x86_Generic_32bit_v11
_1_1_0_0_078\extract.exe running with user exit library E:\GoldenGate11gMediaPac
k\GGFlatFile\V22262-01\flatfilewriter.dll, compatiblity level (2) is current.
SOURCEDEFS E:\GoldenGate11gMediaPack\V26071-01\dirdef\vikstkFF.def
table ggs.vikstk;
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 1G
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1.87G
CACHESIZEMAX (strict force to disk): 1.64G
Started Oracle GoldenGate for Flat File
Version 11.1.1.0.0
** Run Time Messages **
Problem I am facing_
I am not sure where to find the generated flat file,
even the reports are showing there is no data at manager process
I am expecting replicat instead of extract at Flatfile FFR711.prm
I have done this much what to do give me some pointers.....
Thanks,
Vikas

Ok, I haven't run your example, but here are some suggestions.
Vikas Panwar wrote:
extract ffe711
userid ggs@bidb, password ggs12345
discardfile E:\GoldenGate11gMediaPack\V26071-01\dirrpt\EXTFF.dsc, purge
rmthost 10.180.182.77, mgrport 7816
rmtfile E:\GoldenGate11gMediaPack\V26071-01\dirdat\ffremote, purge, megabytes 5
ggsci> add extract FFE711, EXTTRAILSOURCE ./dirdat/oo
ggsci> add rmttrail ./dirdat/pp, extract FFE711, megabytes 20
ggsci> start extract FFE711
You of course need data captured from somewhere to test with. You could capture changes directly from a database and write those to a trail, and use that as a source for the flat-file writer; or, if you have existing trail data, you can just use that (I often test with old trails, with known data).
In your example, you are using a data pump that is doing nothing more than pumping trails to a remote host. That's fine, if that's what you want to do. (It's actually quite common in real implementations.) But if you want to actually capture changes from the database, then change "add extract ... extTrailSource" to be "add extract ... tranlog". I'll assume you want to use the simple data pump to send trail data to the remote host. And I will assume that some other database capture process is creating the trail dirdat/oo
Also... with your pump "FFE711", you can create either a local or remote trial, that's fine. But don't use a rmtfile (or extfile). You should create a trail, either a "rmttrail" or "exttrail". The flat-file adapter will read that (binary) trail, and generate text files. Trails automatically roll-over, the "extfile/rmtfile" do not (but they do have the same internal GG binary log format). (You can use a 'maxfiles' to force them to rollover, but that's beside the point.)
Also, <ul>
<li> don't forget your "table" statements... or else no data will be processed!! You can wildcard tables, but not schemata.
<li> there is no reason that anything would be discarded in a pump.
<li> although a matter of choice, I don't see why people use absolute paths for reports and discard files. Full paths to data and def files make sense if they are on the SAN/NAS, but then I'd use symlinks from dirdat to the storage directory (on Unix/Linux)
<li> both windows and unix can use forward "/" slashes. Makes examples platform-independent (another reason for relative paths)
<li> your trails really should be much larger than 5MB for better performance (e.g,. 100MB)
<li> you probably should use a source-defs file, intead of a dblogin for metadata. Trail data is by its very nature historical, and using "userid...password" in the prm file inherently gets metadata from "right now". The file-writer doesn't handle DDL changes automatically.
</ul>
So you should have something more like:
Vikas Panwar wrote:
extract ffe711
sourcedefs dirdef/vikstkFF.def
rmthost 10.180.182.77, mgrport 7816
rmttrail dirdat/ff, purge, megabytes 100
table myschema.*;
table myschema2.*;
table ggs.*;For the file-writer pump:
+5. on Flat file GGSCI prompt+
extract ffr711
CUSEREXIT flatfilewriter.dll CUSEREXIT passthru includeupdatebefores, params dirprm\ffwriter.properties
SOURCEDEFS dirdef/vikstkFF.def
table myschema.*;
table ggs.*;
ggsci> add extract ffr711, exttrailsource ./dirdat/pp
ggsci> start extract ffr711
Again, use relative paths when possible (the flatfilewriter.dll is expected to be found in the GG install directory). Put the ffwriter.properties file into dirprm, just as a best-practice. In this file, ffwriter.properties, is where you define your output directory and output files. Again, make sure you have a "table" statement in there for each schema in your trails.
Problem I am facing_
I am not sure where to find the generated flat file,
even the reports are showing there is no data at manager process
I am expecting replicat instead of extract at Flatfile FFR711.prm
I have done this much what to do give me some pointers.....The generated files are defined in the ffwriter.properties file. Search for "rootdir" property, e.g.,
goldengate.flatfilewriter.writers=csvwriter
csvwriter.files.formatstring=output_%d_%010n
csvwriter.files.data.rootdir=dirout
csvwriter.files.control.ext=_data.control
csvwriter.files.control.rootdir=dirout
...The main problem you have is: (1) use rmttrail, not rmtfile, and (2) don't forget the "table" statement, even in a pump.
Also, for the flat-file adapter, it does run in just a "extract" data pump; no "replicat" is ever used. The replicats inherently are tied to a target database; the file-writer doesn't have any database functionality.
Hope it helps,
-m

FIrewall for Windows File Share for windows 2008

Hi All,
Recently we upgraded one of our application file server from Windows 2000 to Windows 2008. We use this server for file sharing. We used to read files and write files to this server. Post upgrade one week every thing went fine all of a sudden we started seeing
issues like the application servers stopped communicated to this server.
We worked with our firewall team and enabled port 445 post this the application servers started communicating to the file server. Our Application servers are on Windows 2003 server.
Can someone please help me understand what is the port that needs to be enabled for accessing the file shares. My firewall team confirmed there were no firewalls rules between the Application server and File server.

Hi,
Based on my research, firewall ports required for SMB file sharing are port 445 and 139.
More information for you:
SMB: File and printer sharing ports should be open
https://technet.microsoft.com/en-us/library/ff633412(v=ws.10).aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Applet for multiple file upload

Hi All
I have a requirement for multiple file upload where user can select multiple files as well as folders.
Would appreciate any pointers.
Thanks.

Google "java file upload"

After restoration of files via time capsule my status changed to "Guest" and I can't find the pass word for changing it back to Registered user. Any Help?

after restoration of files via time capsule my status changed to "Guest" and I can't find the pass word for changing it back to Registered user. Any Help?

Hey mate I had this same problem exept instead of my recording disappearing my Chorus that went for 8 bars extended out to 20 bars lol and I used auto tune on it and it sounds like t-pain on a very bad day so it sounds like it does a few things when it comes up that error

Microsoft Office 2004 (Word) unable to save files I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?

Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really.

Internet Explorer ONLY passes parameters to Adobe Reader plugin for hosted files, not local

WORKS:
<embed src="http://host.com/test.pdf#page=5"/>
FAILS:
<embed src="test.pdf#page=5"/>
Both code snippets above work when the HTML file is hosted (IIS / Apache). My web-app needs to be able to run from a USB memory stick and work with IE9. The #page param is required for a core feature of the app.
Parameters after the # are passed correctly to the Adobe Reader plugin in Firefox for offline files, eg: file:///C:/test.htm. The documentation only describes hosted examples: http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/pdf_open_parameters.pdf
I have tried the <object> route as well with similar results, eg: http://pdfobject.com/
I have burned over 8 hours looking for a solution. I have tried any logical settings in Adobe Reader X, and with the security zones in IE. I am not very familiar with IE security zones, but I suspect it could be related to my issue. I can specify the end-user change any browser or plugin settings as an acceptable solution.

I am developing a hybrid web-application that needs to work both offline (entire website) and in a hosted environment. A key part of the product is displaying PDF's with a dynamic index outside of the PDF. This allows us to use PDF's collected from hundreds of contractors, clients and manufacturers and combine them into one searchable product with a consistent interface. I can specify product requirements including IE browser settings, installed plug-ins etc. I am not trying to cater to a wide audience such as everyone online, but a specific one that is spending $5k-30k for a custom resource.
I expect the limiation is due to a wide cast net regarding security. I tried every setting in IE and essentially fully disabling all security options did not resolve it.
I found a solution, by accessing the ActiveX object directly you can use the exposed classes described here: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/wwhelp/wwhimpl/common/html/w whelp.htm?context=Acrobat9_HTMLHelp&file=IAC_API_OLE_Objects.103.167.html
Javascript:
var pdfO = document.getElementById('pdfObj');
pdfO.setCurrentPage(pageNumber);
HTML:
<OBJECT id ="pdfObj" data="test.pdf" TYPE="application/pdf">
<a href="test.pdf">Fall-back code</a>
</OBJECT>
This actually works much faster as well, since the plugin doesn't need to be re-drawn in the DOM

Pass word required for public files?

Similar Messages

Maybe you are looking for