Passcode for installing cluster patch

Hi,
I installed solaris 10 for x86 and now I would install cluster patch.
I downloaded zip cluster and unzipped in a dir.
When I start installation with "install_cluster" script, it ask me a passcode saying that in needed to allow install_cluster to continue running.
I never have seen a passcode for a cluster patch.
Anyone can help me please?

This thread prompted me to try to reproduce what was seen by the original post.
I have an old Pentium-III 440BX system with Solaris 10 GA (3/05) installed and never patched.
So ...
1. Ignore my earlier comments about signed versus unsigned patches.
It doesn't apply to the full cluster, only individual patches that you might download, sometime.
2. Yes, it pays to read the documentation.
The README file is clear about the passcode of "newboot".
3. That README file also cautions about the potential for multiple reboots,
depending on how far down-rev the system might be.
The document suggests three reboots could happen.
My old box needed four.
The cluster update script initiated the reboots.
The old 440BX chipset board interpreted the reboot signal
as a kernel page fault panic, sync'd the filesystems, and bounced the box.
No manual intervention was needed to cause the reboots.
I just had to start the update process all over again after each restart,
then sit back and watch the return codes tell me that such-and-so patch was
already installed, then finally get far enough along to apply the next patches per the script.
I'm now fully patched. Running showrev on a bunch of the patch numbers confirms it.
Curious, though. GRUB was installed but it's not being used.
The old x86 box is still using the original bootloader. No big deal.
I had been thinking of wiping that 7.5GB drive and installing the current release, anyway.

Similar Messages

Does Sun have a guideline or method for installing sendmail patches

Installing Suns sendmail patches overwrites any customized
configurations. Does Sun have any guidelines for how to
(automatically) patch systems without getting hit by mail
not going your way?
I'd really like to be able to use smpatch for all patches, but with
this patch, this does not seem possible, without do some
kludge scripting to handle this.

Hi Guenther,
I have a guess...
The Memory Analyzer is implemented as an Eclipse editor. That means, Eclipse decides based on the extension what editor to open. We have registered the editor for the hprof extension.
Sometimes, heap dumps end with the timestamp, like java_pid282.hprof.200804031745. If you use "Open Heap Dump" then we will try to rename the file. If you use "Open File", it will try to open the heap dump with the default editor as it doesn't know the 200804xxx extension. The default editor is the text editor and that will not work. So the work-around is renaming the file.
Kind regards,
- Andreas.

Dynamic file name - Components to be installed in patch required for SP12

Dear All ,
1)Plz let me know what is the prerequisites for installing SP12 Patch in XI i.e <b>what all components do I need to install for this</b> . Currently I am using SP 09 and I am facing problem related to Dynamic file in file adapter .
2) While installing the components for this patch , is it going to affect my pre-configured scenarios .
Thanks in advance
Prabhat

Hi Danny!
So you are saying that this is a valid path specification in Windows? I did not know this. And I do not remember to ever have seen this before with Java.
Is there a reason why this "abbreviated" form is used in Java?
Has this changed recently, or did I simply never found it before?
Can this be behavior be changed to the complete path form? I like to call 'get[Absolute]Path()' in log messages and test cases, but want to see the complete path in such a case. I would like to avoid getCanonicalPath() in such cases, because this method declares an exception.
Cheers,
Michael

Can't detect my build-in touchpad after installing grub patch

Hi
I have installed on my HP Compaq nx8220 solaris 10 01/06 and I had a problem with USB that was solved by installing the pathces required for installing recomanded patch cluster.The problem is that after installing those patches and respecting the README files from every patch my touchpad is not recognise anymore.The mouse should be found in /devices/isa/i8042\@1\,60/mouse\@0.
Can anyone help me

Hi
I have installed on my HP Compaq nx8220 solaris 10 01/06 and I had a problem with USB that was solved by installing the pathces required for installing recomanded patch cluster.The problem is that after installing those patches and respecting the README files from every patch my touchpad is not recognise anymore.The mouse should be found in /devices/isa/i8042\@1\,60/mouse\@0.
Can anyone help me

J2SE Cluster Patches

The application which i am trying to install in Solaris 10 has the bellow dependency.
"On the server where you will install the SAS Web Client component, you must install
the J2SE Cluster Patches for Solaris. To download these patches, search for J2SE
Cluster Patches for your version of Solaris at http://www.sun.com/."
I am not able to locate above patch in sun.com
Please anyone point to me the right URL ?
Thanks.

This page includes the J2SE patches
http://sunsolve.sun.com/show.do?target=patch-access
You need to scroll down a bit in the recommended patches menu.

Problem: installing Recommend Patch Cluster: patch 140900-10 fails

I don't know if this is correct location for this thread (admin/moderator move as required).
We have a number of Solaris x86 hosts (ie 4) and I'm trying to get the patched and up to date.
I obtained the latest Recommended Patch Cluster (dated 28Sep2010).
I installed it on host A yesterday, 2 hours 9 mins, no problems.
I tried to install it on host B today, and that was just a critical failure.
Host B failed to install 140900-01, because the non global zones rejected the patch because dependancy 138218-01 wasn't installed in the non global zones.
Looking closer, it appears that 138218-01 is for global zone installation only; so it makes sense that the non global zones rejected it.
However, both hosts were in single user mode when installing the cluster and both hosts have non global zones.
140900-01 installed on host A with log:
| This appears to be an attempt to install the same architecture and
| version of a package which is already installed. This installation
| will attempt to overwrite this package.
|
| Dryrun complete.
| No changes were made to the system.
|
| This appears to be an attempt to install the same architecture and
| version of a package which is already installed. This installation
| will attempt to overwrite this package.
|
|
| Installation of <SUNWcsu> was successful.
140900-1 failed on host B with this log:
| Validating patches...
|
| Loading patches installed on the system...
|
| Done!
|
| Loading patches requested to install.
|
| Done!
|
| Checking patches that you specified for installation.
|
| Done!
|
|
| Approved patches will be installed in this order:
|
| 140900-01
|
|
| Preparing checklist for non-global zone check...
|
| Checking non-global zones...
|
| Checking non-global zones...
|
| Restoring state for non-global zone X...
| Restoring state for non-global zone Y...
| Restoring state for non-global zone Z...
|
| This patch passes the non-global zone check.
|
| None.
|
|
| Summary for zones:
|
| Zone X
|
| Rejected patches:
| 140900-01
| Patches that passed the dependency check:
| None.
|
|
| Zone Y
|
| Rejected patches:
| 140900-01
| Patches that passed the dependency check:
| None.
|
|
| Zone Z
|
| Rejected patches:
| 140900-01
| Patches that passed the dependency check:
| None.
|
| Fatal failure occurred - impossible to install any patches.
| X: For patch 140900-01, required patch 138218-01 does not exist.
| Y: For patch 140900-01, required patch 138218-01 does not exist.
| Z: For patch 140900-01, required patch 138218-01 does not exist.
| Fatal failure occurred - impossible to install any patches.
| ----
| patchadd exit code : 1
| application of 140900-01 failed : unhandled subprocess exit status '1' (exit 1 b
| ranch)
| finish time : 2010.10.02 09:47:18
| FINISHED : application of 140900-01
It looks as if the patch strategy is completely different for the two hosts; both are solaris x86 (A is a V40z; B is a V20z).
Trying to use "-G" with patchadd crabs the patch is for global zones only and stops (ie it's almost as if it thinks installation is being attempted in a non global zone).
Without "-G" same behavior as patch cluster install attempt (no surprise there).
I have inherited this machines; I am told each of these machines were upgraded to Solaris 10u6 in June 2009.
Other than the 4-5 months it took oracle to get our update entitlement to us, we've had no problems.
I'm at a loss here, I don't see anyone else having this type of issue.
Can someone point the way...?
What am I missing...?

Well, I guess what you see isn't what you get.
Guess I'm used to the fact USENET just left things formatted the way they were :-O

Install a grid infrastructure for a cluster for single node Windows Server

Hello,
Can you suggest me how to install a Oracle Single Node RAC 11g on a Windows Server 2008 x64 bits? It's for testing purposes and I don't need two nodes. I know that Linux is better, but my company only uses Windows servers. Our former consultant was able to do it, but didn't tell us how to and that server was lost.
I know that we have to install first Grid Infrastructure. Running the "Oracle Grid Infrastructure" installer, I could successfully install a "Grid Infrastructure for a Standalone Server". But that grid is not for a RAC database. When trying to install the Database software, it allowed to me to only install "Single instance database", not "Real Application Cluster database installation".
Running the "Oracle Grid Infrastructure" installer, I tried to select option:
"Install and Configure Grid Infrastructure for a Cluster" -> Typical Installation:
SCAN Name: SRVORAC-cluster
Validating SCAN information
INS-40922 Invalid SCAN Name - unresolvable to IP address.
Is it possible to install a grid infrastructure for a cluster for a single-node or one-node Windows Server ?
Edited by: user521219 on Jan 30, 2012 12:46 PM

HI,
You probably have misconception about Single node RAC. This feature does not need that you have only one physical machine in a RAC, it actually means that in a RAC environment (2 or more nodes), you can run your database on only one node(single instance) and then later you can move this single instance to any other node of the RAC (so that you can do some patching on this node making your database available all the time). This also has some other benefits, see bellow.
http://www.oracle.com/technetwork/database/clustering/overview/ug-raconenode-2009-130760.pdf
http://docs.oracle.com/cd/E11882_01/install.112/e25666/whatsnew.htm#sthref8
Salman

To detect the cluster patch installed

Hi,
I am installing a cluster patch. Once installation is completed i want to check the cluster patch information installed in the system.
Also in the next case if i install another set of cluster patch, will it overwrite the information already in the system or it will create a new .
I am looking for the above details for solaris 9 and solaris 10

Hi,
I am installing a cluster patch. Once installation is completed i want to check the cluster patch information installed in the system.
Also in the next case if i install another set of cluster patch, will it overwrite the information already in the system or it will create a new .
I am looking for the above details for solaris 9 and solaris 10

Patch: CSCun25809, AnyConnect Password Management Fails with SMS Passcode for ASA 5520

Patch: CSCun25809, AnyConnect Password Management Fails with SMS Passcode for ASA 5520
Will this patch be installed in a version which I can use on ASA5520, if I understand the documentation correct, this patch is only installed in versions which are running on -X models of the ASA. 9.2, 9.3

Once the ASA has dynamic NAT enabled to an outside interface, routing between same security level will not work.
You need to add route exempt the inside interfaces to all private subnet.

Error while installing a patch for Mainwin 5.0.2 on Solaris 2.8

Hi,
I am relatively new in this field, so i apologise for any slip-ups.
We use a Solaris 2.8-SPARC server. I was given an external drive which contained the porting software Visual Mainwin 5.0.2 and was told to install it from the drive. On checking it, i found that the entire folder structure of the software was damaged, i.e. every file of the software was changed to uppercase. UNIX being highly case-sensitive, i manually changed each and every file present in the software directory to lowercase and then ran it.
The software ran fine, it got installed and the license server was also up. the licenses were also nicely distributed. everything was fine until i was asked to install the patch 'vmw502_sunos5_HF1.sh'. While installing i got the following output :
# sh vmw502_sunos5_HF*
Extracting installation package to "/tmp/mwspselfextr27624".
Please stand by ... Done.
=====================================================================
Visual MainWin Patch Installation
HF1 for VMW 5.0.2 <sunos5> 24-Jul-2003.14:01 Cycle115
=====================================================================
***Error: cannot find file
/export/home/tools/solaris/env/mainsoft/../mwver/mwversion.ini
Something wrong with your Visual MainWin installation - aborting
when i checked the installation directory, i found that the file 'mwversion.ini' was present inside the directory 'mwver'. I cant see any reason why the patch is not recognizing the file.
Can anybody help?? Any kind of help will really be appreciated.
-SD

Hope you already tried: ls -l /export/home/tools/solaris/env/mainsoft/../mwver/mwversion.ini If ls returns the file name, try running the script under truss to find some clues.
% truss -f -vall -rall -wall -o /tmp/mwpatch.log sh vmw502_sunos5_HF*

Can Photoshop Elements 13 and Premier Elements 13 be installed/configured/patched standalone for security purposes (not linked to cloud, mobile, Microsoft, Adobe, etc)?

We have installed a trial version of Photoshop Elements and plan to do so for Premier Elements. However, for security reasons, it is of no use to us unless we can install and use it standalone (not linked to cloud, mobile, Microsoft, Adobe, etc.). Can Photoshop Elements 13 and Premier Elements 13 be installed/configured/patched standalone as described above? If so, what do we need to do regarding installation/configuration/patching to test this? Thanks in advance.

Hi,
Can you please share the logs?
You can use the Adobe Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
Thanks,
Shikha

Can't install latest patch, "Patch Module for 32-Bit Version of Lenove Patch Utility" v 1.0.3

Hi,
I'm hoping someone can offer some help: I am unable to install the above patch on a T61 w/XP Pro/SP3. Error is simply, "1 Package did not install." Manual install gets same result. In the past when a patch did not instaqll I have had success by downloading and manually installing it, but I can't find the executable for this particular patch. Can anyone make a suggestion? Or point me to the executable?
GaryK
Solved!
Go to Solution.

This is how I was able to successfully install the Lenovo Patch Utility:
1) Enable if necessary and log into the built-in Administrator account.
2) Run System Update. Download and install the Lenovo Patch Utility (unsure if this is a necessary step,)
3) At this point, the Lenovo Patch Utility is not installed. The previous version of the Lenovo Patch Utility will display in Programs and Features.
4) Run System Update under an administrator account. Download and install the Lenovo Patch Utility (I ran this under a user-created Administrator account; unsure if works under built-in Administrator account..) Lenovo Patch Utility will no longer appear in Programs and Features. This indicates it has been succesfully installed.
5) Disable built-in Administrator account if desired for security reasons.

Patches required for installing the configuration management workbench?

Hi Team,
Please list all patches required for installing the configuration management workbench in Oracle Apps version 11.5.10.2 ?
Please let me know.
Thanks,
Suman V.

Hi;
I also suggest to check:
How to Configure the Oracle Configuration Manager with Support WorkBench [ID 1174943.1]
Regard
Helios

Oracle Patches for Installing Oracle9i R2 on RedHat8 ?

I have downloaded disk1, disk2, and disk3 files from site:
http://www.oracle.com/technology/software/products/oracle9i/htdocs/linuxsoft.html
I have been told that Oracle 9i requires a patch available only from Metalink for it's successful installation on RedHat 8.0, Is it correct.
If so how do I install these patch?

I have been told that Oracle 9i requires a patch available only from Metalink for it's successful installation on RedHat 8.0, Is it correct.This is (officially) an unsupported configuration, so I don't think Oracle provides patches for it. Generally, how to install a patch is explained in the corresponding README file, which comes with every patch.
See the 'Puschitz' site, how to install:
http://www.puschitz.com/InstallingOracle9i.shtml
Werner

Script for installing patches manually from a folder

Dear Team,
Due to some restrictions, i need to execute each patch by double clicking on it.
Request someone to help me to find a script which can look in side folder and install the patches inside and ask for reboot at end.
It should also write status of patches installed or not in to a log file.
Thanks
Rama
Cheers, Ramakrishna Darla.

These are MS Windows patches, say for server 2012.
this is a simple batch file am using for monthly patches. But now there are servers in staging area of DC which are required to patch with all missing patches from last 1year or so. We got all the patches in to a folder, and need to run against each server.
================================
SC QUERY state= all | findstr "DISPLAY_NAME | STATE" > C:\Services_Before_Reboot_Dec_14.txt
# will grab service beofore reboot
Windows8.1-KB2992611-x64.msu /quiet /norestart
Windows8.1-KB3008923-x64.msu /quiet /norestart
Windows8.1-KB3011780-x64.msu /quiet /norestart
Windows8.1-KB3013126-x64.msu /quiet /norestart
Pause
===================
Cheers, Ramakrishna Darla.

Passcode for installing cluster patch

Similar Messages

Maybe you are looking for