Passcode problem, Please help I would really apreciate it.
My friend by accident locked my ipod touch with a passcode and i found out when i got home. I could ask her for the passcode but the problem is i wont see her for 2 weeks until next year and i really want to use it. what should i do please someone help me!
Do a forced restore or a normal one
1. Connect the iPod
2. Hold the home and sleep/wake button until it goes blank
3. When the Apple logo appears let go of the sleep button
It should now go into restore mode
Similar Messages
-
Itunes connection and Passcode problem (Please Help!!)
So, my computer recently was broken beyond repair.. so when I got a new computer and redownloaded itunes i tried to connect my itouch to charge it and i noticed it said "Itunes cannot open ipod in library please imput password on ipod" I never put a password on it... aparently one of my friends did. So I was being a total DA and attempted to guess the password too many times now the ipod's disabled untill i can connect to itunes and itunes wont let me connect untill I get the password, I'm at a total loss please help!
You need to place the iPod in recovery mode and then connect it to your new computer and restore it via iTunes. Note that you will lose all content on the iPod. You can redownload apps at no additional cost provided you are signed into the same iTunes account that originally purchased the apps.
-
Entering passcode problem please help
My ipod touch only goes to the screen where it says <<connect to itunes>> so i plug it in, and it says i need to put in my passcode before connecting it to itunes, so basically i cant get to the point where i enter my passcode
Forgot an iPhone Passcode? How to reset the iPhone passcode
iPhone and iPod touch- Wrong passcode results in red disabled screen
Download the IPod Touch user guide -
device disabled after entering wrong passcode.
Please help me in getting this unlocked without lossing the data as the data is really important for meI think you should call via phone or perhaps take it to a phone store. I suggest taking your id, box packaging and other necessities such as the reciept of the phone being purchased.
Hope this helped -
hello sir my iphone screen turns off after using 2-5 minutes what would be the problem please help me out
To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the phone. If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
Use iTunes to restore your iOS device to factory settings - Apple Support
Find an Apple Authorized Service Provider
iPhone - Contact Support - Apple Support -
Please help I'm really trying to learn it as fast as possible? I've posted the file with all my screen shots going through the enitre process of me creating the LSMW file.
First, I will try to address the iPod issue: If youve tried EVERYTHING on the website, your only other option is probably to contact Apple, I recommend by phone, and informing them of the problem. You are covered by warranty and therefore they are liable to assist you. Try that and come back with a status update
Now I will address your attitude about it:Its absolutely understandable to be upset over something like this, especially with such an expensive product, but you are generalizing far to much. You may think Apple is being unproffesional by not warning potential buyers of the iPods common faults, but do you really think they would? they are out to sell these things, they arent going to point out the bad in their product. And not all iPods have problems, in fact only a fraction do. That gopes for the rest o Apples products as well. You are too hasty assuming all Apple products are junk, and one of many reasons as to why that is unfair of you is becuase you dont own any other Apple products. -
X-Fi Fatal1ty Plat1num Champion Ed. problem, please help!
9X-Fi Fatalty Platnum Champion Ed. problem, please help!? Hi there everyone,
So i have a X-Fi Fatalty Platnum Champion Ed. and a computer with Windows 7.
I've searched the web and i found many people saying that the card it's working and perfectly compatible so i would like to exclude this option as far as the problems that i'm having.
So, right out of the box i've placed the front panel in with the ribbon cable and the power connected to it, then i connected the other end of the ribbon cable and finally placed the card in one of the PCI slots i have free.
Now, when i start my PC, i don't hear any particolar "beep messages" but nothing will come on the screen, in few words my PC will not boot at all. I can hear the HDD spinning, everything sounds normal except for that "little" problem.
So, i re-did all the connections thinking that maybe i did something wrong, but following the instruction i did exactly as told. So i tried again to power up the computer and i've noticed that the X-Fi logo is lit up (red light) and.. I don't really know if that means something or it's just something aside that doesn't really matter.. But, what is it's The PCI card is broken or there's something else?
I did try to disable the sound card (integrated mobo sound) from the BIOS but that didn't change anything. I did try all the software options but this looks like more of an hardware problem (please correct me if i'm wrong and/or i've missed something).
There's something that popped up in my mind.. the PSU. I noticed that i have a 300W PSU (mm.. low, isn't it's)?and i was wondering if that's enough or i need a more powerful one.. and if that's may be the case for the PCI to not work at all causing all i've already explained above. I mean.. It seems like i've installed a dead peripheral and that's impeding the computer to start up..
I don't know.. I need clarification and help, PLEASE.
Thank you very much in advance!Look at the beta thread sticked above but good luck waiting for a new driver. That beta driver has been there since January and although better than the normal driver it is still crap.
All the boot type issues are with the SSD but if you getting in game crashes etc... under windows 8 that is simply that the driver stinks. -
E90 Several problems please help!
I have used 9210 and 9500 before and i found that the new e90 are well built but not user friendly enough...
please help me with the problems below as i cannot find the menu or option for it...
1.while searching for a contact, the number is not shown...i think it was shown both the name and contacts rite?
2.I cannot use the hsdpa modem while the msn on the phone is stil running? why? is it because the access point is being used by the phone?
3.any yahoo messenger software for it?
4.there are a few shortcuts in the desk page (or desktop?) can i rearrange the shortcuts for more efficiency?
Please help as i really like the phone built but not yet the features.
ricky23-Sep-200706:03 PM
rwij wrote:
I have used 9210 and 9500 before and i found that the new e90 are well built but not user friendly enough...
please help me with the problems below as i cannot find the menu or option for it...
1.while searching for a contact, the number is not shown...i think it was shown both the name and contacts rite?
2.I cannot use the hsdpa modem while the msn on the phone is stil running? why? is it because the access point is being used by the phone?
3.any yahoo messenger software for it?
4.there are a few shortcuts in the desk page (or desktop?) can i rearrange the shortcuts for more efficiency?
Please help as i really like the phone built but not yet the features.
ricky
Hello Ricky.
All of the questions you asked could have been answered if you had used the search feature. However, as a first timer we like to point you in the right direction. Here goes:
1. There is a search feature that is in the Office folder. It can search the entire device for you, for names, addresses, etc...
2. You can not sure the same connection for two different operations. I mean that: if you want to use MSN and then use Yahoo, you must tell Yahoo to use the connection that MSN is on. This will work every time. The best thing to do is to use a default connection for both. Make sure they use the SAME connection.
3. There is: IM+ by ShapeServices @www.shapeservices.com (pay service), Fring @ www.fring.com (free and it works well. Consider it Skype for your phone).
4. Nope. There is a piece of software that I can not remember the name to that will do this. Someone will post the link for you for sure. Vmoisa, Jafores. You guys around?
Hope this helps.
Show the KUDOS button some love.... Hit that bad boy.... It don't hurt....
Apple iPhone 5,
Retina MacBook Pro, iPad Mini, Nikon D4 -
I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.
I would make an appointment at the Genius Bar of an Apple store because of the shock issue. I doubt it was caused by the update.
-
Can't burn music I purchased months ago, I could only burn the 4 cuts I bought this evening,6/9/12 message said originals cannot be found? Please help itunes would not let me buy a second time, thats a good thing but Im trying to make a music CD and itunes will not let me? The music is in my music file but will not let me burn them ! really I tried over and over, now Im just frustrated !
Please find the original's purchased, my name and email have not changed. Thanks for your time and consideration.
Jeannie
7024503288
[email protected]Fixed. /Users/x/Library/Application Support/SIMBL/Plugins/AirKeysInputManager.bundle got corrupted by a badly installed safari extension. Deleting this, then reinstalling adobe air did the trick. I wasn't thorough enough on my first try, it was tricky to find everything associated. I had to look for files in the console log then search for them. Spotlight was missing some deep files, EasyFind worked better for me.
-
System D.O.T automatically why? problem please help me
hello everybody,
please help me my system says at post message that wrong cmos information then gives me option to boot or go to bios when i check my bios , my ONBOARD LAN GETS ENABLED AUTOMATICALLY ,the Frequency tab i check says something like PRIVATE DOT ENABLED AND CPU+AGP SOMETHING i mean my comptuer gets fast and the CPU fan becomes on full speed and i hear loud noise until Corecenter runs it becomes quiet again. the question is is this a bios fault or something , DID ANYBODY WHO BOUGHT 865PE PLATINIUM BOARD EXPERIENCE THIS PROBLEM PLEASE HELP ME MY CONFIGURATIONS ARE BELOW
PENTIUM 2.40 GHZ PRESCOTT (54 C MAXIMUM)
MSI 865PE PLATINIUM BOARD (IT GOT NO RAID ABILITY)
DDR 400 MHZ KINGSTON SINGLE CHIP RAM (ALTHOUGH IT RUNS AT 333MHZ)
MSI GEFORCE FX 5200 T128 (64 BIT DAMN IT!!!)
MSI CD ROM
SONY FLOPPY
COMPUTER CASING WITH SMALL MINI ADDITIONAL FAN ON THE SIDE (IT RUNS MAYBE AND ALSO GIVES ELECTRIC SHOCK OR SOMTHING SOMETIMES)
STABIMATIC 500V AUTOMATIC STABILIZER(ALTHOUGH I HAVE UPS CAN SOME BODY TELL ME IS UPS ALSO STABILIZER OF APC(AMERICAN POWER ----)
AMI BIOS 3.4
SO CAN ANY BODY TELL ME IF THIS IS A PROBLEM OF BIOS SHOULD I UPGRADE TO LATEST
WHAT METHOD THROUGH AUTOUPDATE OR MANUAL , I ONLY ONCE DID MANUALLY ON MY DELL 4100 PIECE OF CAKE !Hi,
Go to here for MSI LIVEUPDATE
http://www.msi.com.tw/program/support/software/swr/spt_swr_detail.php?UID=556&kind=1
Install and run program.........
BIOS problems:
http://www.msi.com.tw/html/support/bios/note/boot.htm
If you would like to download bios and install........
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=556&kind=1
You can also choose 3.7 if wish too first.....
I am sure this will help you.
Del -
How can i change the setting on my ipad 2? Whenever i read stories in the net after awhile it goeson standby and i have to keep on entering the passcode. Please help.
Settings>General>AutoLock>Never. Now it will not sleep at all so change it back when you are done reading.
-
my iphone 3gs is in dfu mode, but when i plug it into my laptop to restore it, my phone won't show up in itunes at all. what do i do???? please help, it would be very much appreciated
Follow the steps here VERY CAREFULLY: http://support.apple.com/kb/HT1808
-
my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!
Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!
-
Problem Please help me.....Let me know the area to look for it I am a DBA..
Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION CPIC (TCP/IP) on local host
ERROR service 'sapmsPRD' unknown
TIME Wed May 04 08:59:06 2005
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -3
MODULE ninti.c
LINE 428
DETAIL NiPServToNo
SYSTEM CALL getservbyname
COUNTER 1
at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
at SAP.Connector.SAPConnection.Open()
at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.search.LoadRegionDetails()
SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
System.Web.UI.Page.RaiseChangedEvents() +115
System.Web.UI.Page.ProcessRequestMain() +1099The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
This is basically telling the requester at what port to look for the message server.
C
Maybe you are looking for
-
Trying to do Monty Python animations in FCP
I used to do little animations in the style of those shown on the Monty Python Flying Circus TV show using Premiere Pro and I was quite good at it. It was easy to use the Premiere Pro motion, scale, rotate features on a clip in a very visually direct
-
Can I insert HDD 160GB in Satellite U200-181
Dear Friends! Whether I can insert HDD 160 Gb in laptop Toshiba U200-181? Version BIOS 3.40 Thanks!
-
Ok, I kind of figured out my problem with having text scroll when there's not enough room in a table cell. I added this style to my style sheet: div#overflow { overflow: auto; height: 310px; Then I surrounded the text in my cell with this div tag: <d
-
J2se 1.4 + J2EE 1.3 and weblogic 10 server
hi we have an application written in J2SE 1.4 and J2EE 1.3 . we currently have the app in WL 8.1 if we migrate to WL 10 server, are there any issues that we have to address. or will the backward compatibility of J2SE and J2EE take care of them Thanks
-
Dr. Browns 1-2-3 Process: Will it be usable in Lightroom?
I use Dr. Browns 1-2-3 Process in Bridge and I love it! Will 1-2-3 come to LR? Or is there functionality built into LR that does what 1-2-3 does already?