Passed 310-200 (OCP Solaris 10 System Administration, Part I) Exam!!!

Hello Everybody,
Let's share our exam experience and knowledge in this thread.
Thank you a lot!

NOTHING is allowed, you can come back and refer to ZIP.
I believe, anyway.
I can also share my thoughts of my first Solaris exam. The lighting was good, the chair was comfortable and I picked locker No.5 outside of the exam room for all of my valuables (remember, you're allowed to take nothing with you .... not even a pen!) on the basis that this used to be my football shirt number and I thought it would bring me luck.
I also had a great view of the Berkshire countryside as it was a lovely, sunny day.

Similar Messages

Beta Testing Begins for New "Oracle Linux 5 and 6 System Administrator" (OCA) Certification Exam (1Z1-100)

Oracle Certification begins beta testing this week for the new upcoming certification - Oracle Certified Associate, Oracle Linux 5 and 6 System Administrator. READ MORE

We do have things in the works but cannot be announced prematurely. We'll put the word out on the [Oracle Certification Blog|http://blogs.oracle.com/certification/] as soon as possible.
Cheers,
- Harold

Solaris exam form (Oracle Solaris 10 System Administrator Certified Professional Exam)

Hello,
In comming days I'm going to try above Solaris 10 exam. Have some questions regarding form of exam (I couldn't find it on Oracle website):
1. Is it multiple choice test with indication in each question how many answers are correct?
2. Is it possible to switch questions during exam and get back later to ones which I'm not sure?
3. Are the results given just after or later
regards
pete

2698137 wrote:
As you see in the section header there's word Network Printers. However in description below there's nothing about printers. There some more examples. Should I also be prepared for questions about printers?
thanks in advance!
pete
In the days of the Sun when even an ultrasparc 2 could run solaris 10 and some brainless clot still allowed access to the obp updates there were exams cx-310-201 and cx-310-202.
In fact yours truly got 100% for his "manage network printers and systems processes" despite in practice my setup for printers in Glasgow coming out in Galashields. In some ways I was quite good at printers.
Then around the exam had a update for S10u5 when the old ZFS and zones etc started to get really going.
( I completed the cx-310-202 under that update).
Refering to Calkins ISBN-13: 978-0-7897-3790-8 for the section he considers as "Managing System processes" there is no mention of printers.
HOWEVER there was a whole section on managing the lp printer service in that book in the very next chapter!
But we are talking history here .... and the exam may have been through further updates ... indeed the current exam is validated against s10u11 (which is about 2/3 years old I would guess without looking it up).
So printing may well have been dropped. Any other topics may have had to be tweaked.
It's obviously best you know about printing ..... but quite frankly its somewhat rate nowadays. It can also be a but of a minefield as its been through changes with the releases. It's quite possible it's dropped from the exam altogether.
You have 2 reasonable choices:-
- Study all you can about printers at s10u11. (Go over what the online documentation says for s10u11). I'm sure some of this stuff changed throughout the life of Solaris 10. It shouldn't be more than one or two questions so don't spend too much time on it.
- Raise an SR at Oracle University - Support Form ... Question the discrepancy on the title versus the underlying topics. ( .. there isn't a category for this .... exam results/score report might be best) questioning the discrepancy in the topics. Put the SR number back on this thread as if Brandye is happening to pass she might pick it up).
... I can't be sure of anything I have said here. I may end up confusing rather than helping over Matthew's earlier reply.

To upgrade to OCP Solaris 11 Path

I have 2 question?
I have Oracle Solaris Certified Associate Exam 1Z0-876 cerfitifcate
1, Can I get the Oracle Certified Professional, Oracle Solaris 10 System Administrator Certification
after I pass Exam
Oracle Solaris 10 System Administrator Certified Professional Exam, Part II 1Z0-878
2, To upgrade to Oracle Certified Professional, Oracle Solaris 11 System Administrator Certification.
A required step 1 - Prior Certification Requirements
Oracle Certified Professional, Oracle Solaris Administrator or Sun Certified Solaris Administrator - any version
What is version incluclued? Is my 1Z0-876 cerfitifcate is qualified?

tien86 wrote:
in this link
https://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=653&get_params=p_id:202#tabs-1
You look at the tab Upgrades:
There are 2 steps:
Step 1 - Prior Certification Requirements
Step 2 - Pass Exam
My question 2, is about the Step 1
This relates to to the upgrade path route to Oracle Solaris 11 System Administrator certification.
The key point in your question is how the prior certification requirements "Oracle Certified Professional, Oracle Solaris Administrator or Sun Certified Solaris Administrator - any version" should be interpreted
And in particular is the "Oracle Certified Associate, Oracle Solaris 10 Operating System Certification" (Attained via 1z0-876) included within that.
==== Answer ====
Unfortunately for you the answer is no. However while my providence in this area is excellent I am not authorative and I would recommend it you have any doubt to raise a support call at Oracle University - Support Form subject "Certification Upgrade Path" for a definitive answer.
==== Comments ====
1. I am not entirely happy with the wording: "Oracle Certified Professional, Oracle Solaris Administrator or Sun Certified Solaris Administrator - any version"
It is OK when interpreted as
"Oracle Certified Professional, Oracle Solaris Administrator" ( This clearly does not encompass the Oracle Solaris 10 OCA)
OR
"Sun Certified Solaris Administrator - any version" ( Which essentially Encompasses SCSA 10,9,8,... when the certifications were under sun (and regarded as OCP level by Oracle) ... but not the Sun Certified Solaris Associate SCSAS )
2. OCP Upgrade exams are only from a version at a prior OCP level. This means the training requirement was met at a prior OCP level version or the OCP level was achieved at a previous version before a training requirement was introduced.
(The special exceptions of 1z0-067/1z0-034 have just been introduced for Oracle DBA but these retain a training requirement at the higher version ... nobody would touch attempting these until oracle certification offered free beta vouchers and had the Oracle Certification Help Center besieged by those who missed out!)
3: My understanding is the sun Certified Solaris Associate SCSAS was designed a single exams certification for people wishing a solaris certification not wishing to take on an SCSA and knowing the in's and out of system administrator things like OPENBOOT firmware and backups etc. Things that perhaps say a developer would not need to know. When taking over from Sun as the Certification had Associate in it they felt appropriate to may it to the name "Oracle Certified Associate, Oracle Solaris 10 Operating System Certification". Nowadays it starting from scratch undoubtably that exam would be an OCS certification. For Oracle Solaris 11 System administrator they were able to map the 1z0-821 exam to an OCA and 1z0-822 to an OCP in line with they more typical model.
==================
Hope this Helps ....

If i take the (ocp)310-200 exam,do i still need to pass (oca)310-105 first?

If i take the (ocp)310-200 exam,do i still need to pass (oca)310-105 first?

810422 wrote:
If i take the (ocp)310-200 exam,do i still need to pass (oca)310-105 first?No. For the OCP, Solaris 10 System Administrator certification you only need to pass CX-310-200 and CX-310-202 exams.
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=328

I need books that would help do solaris 10 CX-310-200 and CX-310-202 exam

hi i want to do solaris 10 system administration exam anyone has book that would help me do CX-310-200 and CX-310-202 exam?

Bill Calkin's Solaris Administration books are very helpful for these exams. Also you can use Solaris Admin Collection which can be found from this link: http://docs.sun.com/app/docs/coll/47.16
Good luck to you!

Web Part Error: This page has encountered a critical error. Contact your system administrator if this problem persists

Hi there,
I am getting the following error in SharePoint 2007 site.
Web Part Error: This page has encountered a critical error. Contact your system administrator if this problem persists.
Show Error Details
Hide Error Details
[WebPartPageUserException: This page has encountered a critical error. Contact your system administrator if this problem persists.]
at Microsoft.SharePoint.ApplicationRuntime.SafeControls.RethrowExceptionIfNeeded()
at Microsoft.SharePoint.ApplicationRuntime.SafeControls.GetTypeFromGuid(Guid guid)
at Microsoft.SharePoint.WebPartPages.SPWebPartManager.CreateWebPartsFromRowSetData(Boolean onlyInitializeClosedWebParts)
There is no event logged related to this error. I have checked ULS log and nothing much I can find over there.
Any help would be highly appreciated.
Thanks,
Puli
Puli Bala

It is not only because of unsafe controls. Please refer the articles below.
http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2008/09/24/safe-mode-did-not-start-successfully-request-failed.aspx
http://blogs.edwardwilde.com/2009/12/22/safe-mode-did-not-start-successfully-could-not-load-file-or-assembly/
https://social.technet.microsoft.com/Forums/sharepoint/en-US/6d81f7b0-33c5-482b-b7aa-9f639c784dea/what-reason-can-cause-the-errorerror-failure-in-loading-assembly-microsoftsharepoint?forum=sharepointadminlegacy
https://paulsiu.wordpress.com/2008/07/24/sharepoint-loading-assembly-error-in-the-event-log/
Puli Bala

OK to use fdisk/100% "SOLARIS System" partition for RAID6 Virtual Drive?

Solaris newb, here - I am configuring an x4270 with 16 135 GB drives. Basic approach is
D0, D1: RAID 1 (Boot volume, Solaris, Oracle Software)
D2-D13: RAID 6 (Oracle dB files)
D14, D15: global spares
After configuring the RAID's w/WebBIOS Utility, I am now trying to format/partition the RAID 6 Virtual Drive, which shows up as 1.327 TB 'Optimal' in the MegaRAID Storage Manager. After hunting around the ether for advice on how to do this, I came across http://docs.oracle.com/cd/E23824_01/html/821-1459/disksxadd-50.html#disksxadd-54639
"Creating a Solaris fdisk Partition That Spans the Entire Drive"
which is painfully simple: after 'format', just do an 'fdisk' and accept the default 100% "SOLARIS System" partition. After doing this, partition>print and prtvtoc show this:
partition> print
Current partition table (original):
Total disk cylinders available: 59125 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 unassigned wm 0 0 (0/0/0) 0
1 unassigned wm 0 0 (0/0/0) 0
2 backup wu 0 - 59124 1.33TB (59125/0/0) 2849529375
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
8 boot wu 0 - 0 23.53MB (1/0/0) 48195
9 unassigned wm 0 0 (0/0/0) 0
# prtvtoc /dev/dsk/c0t1d0s2
* /dev/dsk/c0t1d0s2 partition map
* Dimensions:
* 512 bytes/sector
* 189 sectors/track
* 255 tracks/cylinder
* 48195 sectors/cylinder
* 59127 cylinders
* 59125 accessible cylinders
* Flags:
* 1: unmountable
* 10: read-only
* Unallocated space:
* First Sector Last
* Sector Count Sector
* 48195 2849481180 2849529374
* First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
2 5 01 0 2849529375 2849529374
8 1 01 0 48195 48194
My question: is there anything inherently wrong with this default partitioning? Database is for OLTP & fairly small (<200 GB), with about 140 GB being LOB images.
Thanks,
Barry

First off, RAID-5 or RAID-6 is fine for database performance unless you have some REALLY strict and REALLY astronomical performance requirements. Requirements that someone with lots of money is willing to pay to meet.
You're running a single small x86 box with only onboard storage.
So no, you're not operating in that type of environment.
Here's what I'd do, based upon a whole lot of experience with Solaris 10 and not so much with Solaris 11, and also assuming this box is going to be around for a good long time as an Oracle DB server:
1. Don't use SVM for your boot drives. Use the onboard RAID controller to make TWO 2-disk RAID-1 mirrors. Use these for TWO ZFS root pools. Why two? Because if you use live upgrade to patch the OS, you want to create a new boot environment in a separate ZFS pool. If you use live upgrade to create new boot environments in the same ZFS pool, you wind up with a ZFS clone/snapshot hell. If you use two separate root pools, each new boot environment is a pool-to-pool actual copy that gets patched, so there are no ZFS snapshot/clone dependencies between the boot environments. Those snapshot/clone dependencies can cause a lot of problems with full disk drives if you wind up with a string of boot environments, and at best they can be a complete pain in the buttocks to clean up - assuming live upgrade doesn't mess up the clones/snapshots so badly you CAN'T clean them up (yeah, it has been known to do just that...). You do your first install with a ZFS rpool, then create rpool2 on the other mirror. Each time you do an lucreate to create a new boot environment from the current boot environment, create the new boot environment in the rpool that ISN'T the one the current boot environment is located in. That makes for ZERO ZFS dependencies between boot environments (at least in Solaris 10. Although with separate rpools, I don't see how that could change....), and there's no software written that can screw up a dependency that doesn't exist.
2. Create a third RAID-1 mirror either with the onboard RAID controller or ZFS, Use those two drives for home directories. You do NOT want home directories located on an rpool within a live upgrade boot environment. If you put home directories inside a live upgrade boot environment, 1) that can be a LOT of data that gets copied, 2) if you have to revert back to an old boot environment because the latest OS patches broke something, you'll also revert every user's home directory back.
3. That leaves you 10 drives for a RAID-6 array for DB data. 8 data and two parity. Perfect. I'd use the onboard RAID controller if it supports RAID-6, otherwise I'd use ZFS and not bother with SVM.
This also assumes you'd be pretty prompt in replacing any failed disks as there are no global spares. If there would be significant time before you'd even know you had a failed disk (days or weeks), let alone getting them replaced, I'd rethink that. In that case, if there were space I'd probably put home directories in the 10-disk RAID-6 drive, using ZFS to limit how big that ZFS file system could get. Then use the two drives freed up for spares.
But if you're prompt in recognizing failed drives and getting them replaced, you probably don't need to do that. Although you might want to just for peace of mind if you do have the space in the RAID-6 pool.
And yes, using four total disks for two OS root ZFS pools seems like overkill. But you'll be happy when four years from now you've had no problems doing OS upgrades when necessary, with minimal downtime needed for patching, and with the ability to revert to a previous OS patch level with a simple "luactivate BENAME; init 6" command.
If you have two or more of these machines set up like that in a cluster with Oracle data on shared storage you could then do OS patching and upgrades with zero database downtime. Use lucreate to make new boot envs on each cluster member, update each new boot env, then do rolling "luactivate BENAME; init 6" reboots on each server, moving on to the next server after the previous one is back and fully operational after its reboot to a new boot environment.

Problem happening again. The maximum report processing jobs limit configured by your system administrator has been reached.

We have started receiving load report failed error again in one of our production servers. This problem occurred some months ago and on that time we found that in the code reportdocument.close method was not called so we added into the code and set the print job limit to 400 and problem went away for couple of months but now it has started again.
Load report failed.
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
   at AppSuite.WebApp.CrystalViewer.LoadReport(Boolean bRefresh)
   at AppSuite.WebApp.CrystalViewer.Page_Load(Object sender, EventArgs e)
   at System.Web.UI.Control.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
The maximum report processing jobs limit configured by your system administrator has been reached.
   at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
This is our code
Private m_oReportDocument As New ReportDocument
    Private ReadOnly Property ReportId() As Integer
        Get
            Return Integer.Parse(Me.Request.QueryString("r"))
        End Get
    End Property
    Private Property CacheKey() As String
        Get
            Dim sCacheKey As String = Me.Request.QueryString("ck")
            If sCacheKey Is Nothing OrElse sCacheKey.Length = 0 Then
                sCacheKey = CStr(Me.ViewState("CacheKey"))
            End If
            Return sCacheKey
        End Get
        Set(ByVal Value As String)
            Me.ViewState("CacheKey") = Value
        End Set
    End Property
    Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
        If Not Me.IsPostBack Then
            LoadReport()
        End If
    End Sub
    Private Sub btnPDF_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnPDF.Click
        'Redirect to the PDF Viewer passing it the ReportId and CacheKey
        Me.Response.Redirect(String.Format(ReportHelper.PDFViewerURL, Me.ReportId, Me.CacheKey))
    End Sub
    Private Sub btnRTF_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRTF.Click
        'Redirect to the RTF Viewer passing it the ReportId and CacheKey
        Me.Response.Redirect(String.Format(ReportHelper.RTFViewerURL, Me.ReportId, Me.CacheKey))
    End Sub
    Private Sub btnExcel_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnExcel.Click
        'Redirect to the Excel Viewer passing it the ReportId and CacheKey
        Me.Response.Redirect(String.Format(ReportHelper.ExcelViewerURL, Me.ReportId, Me.CacheKey))
    End Sub
    Private Sub crvMain_Navigate(ByVal source As Object, ByVal e As CrystalDecisions.Web.NavigateEventArgs) Handles crvMain.Navigate
        LoadReport()
    End Sub
    Private Sub crvMain_Search(ByVal source As Object, ByVal e As CrystalDecisions.Web.SearchEventArgs) Handles crvMain.Search
        LoadReport()
    End Sub
    Private Sub crvMain_ViewZoom(ByVal source As Object, ByVal e As CrystalDecisions.Web.ZoomEventArgs) Handles crvMain.ViewZoom
        LoadReport()
    End Sub
    Private Sub crvMain_Drill(ByVal source As Object, ByVal e As CrystalDecisions.Web.DrillEventArgs) Handles crvMain.Drill
        LoadReport()
    End Sub
    Private Sub crvMain_DrillDownSubreport(ByVal source As Object, ByVal e As CrystalDecisions.Web.DrillSubreportEventArgs) Handles crvMain.DrillDownSubreport
        LoadReport()
    End Sub
    Private Sub crvMain_ReportRefresh(ByVal source As Object, ByVal e As CrystalDecisions.Web.ViewerEventArgs) Handles crvMain.ReportRefresh
        LoadReport(True)
    End Sub
    Private Sub LoadReport()
        LoadReport(False)
    End Sub
    Private Sub LoadReport(ByVal bRefresh As Boolean)
        If Common.CouldBeMultiDB(User.Identity.Name) AndAlso TypedSession.OverrideCompany.Length > 0 Then
            Common.Settings.OverrideCompany = TypedSession.OverrideCompany
        End If
        'Get the report data
        Dim dtReport As DataTable = ReportHelper.GetReportData(Me.CacheKey, bRefresh)
        'If there is data to display bind it to the Crystal Viewer
        If dtReport.Rows.Count > 0 Then
            With m_oReportDocument
                .Load(ReportHelper.GetReportPath(Me.ReportId))
                .SetDataSource(dtReport)
                .PrintOptions.PaperSize = Common.Settings.CrystalPaperSize
            End With
            crvMain.ReportSource = m_oReportDocument
        Else
            'Hide the controls and display a message if there is no data
            crvMain.Visible = False
            btnPDF.Visible = False
            btnExcel.Visible = False
            lblNoResults.Visible = True
        End If
    End Sub
    Protected Sub Page_Unload(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Unload
        m_oReportDocument.Close()
        m_oReportDocument.Dispose()
    End Sub
Can any one tell if we are doing anything wrong in our code. We don't use sub reports any more however we do use paging and some of our reports have 200+ pages. Also is it possible to find out print job limit and concurrent users by writing some code.
Thanks

I suspect it's not the code - after all it worked(?). It is much more likely that, it is the load. Remember that the report engine can only handle three concurrent requests at any one time. Also, remember that you can run out of print jobs real fast as subreports also count as print job. E.g.; say someone added a report that has 4 subreports in the detail section, the report runs a 100 records, you will be at 401 print jobs and thus over the limit. You can keep increasing the print job limit, but that means you are loading the server and eventually you will bring it down too...
It may be time to consider, web farms or Report Application Server to scale up(?).
Getting to the latest SP is never a bad idea either.
And have a look at the scalability suggestions in this doc:
Crystal Reports 2008 Component Engine Scalability
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

EBS 11i - Getting Blank Page after Clicking System Administrator Link

Hi Experts,
I recently migrated the EBS 11i (11.5.10.2) from Solaris to Linux 5. Most of the things seems to be working fine but once I click the link System Administrator getting blank page. I found the following errors in the Jserv Logs. I am trying it from IE7 as well as from Firefox 3.
Please help to resolve the issue.
java.lang.NullPointerException
at edu.apollogrp.fsg.cas.EncryptionUtil.encrypt(EncryptionUtil.java:63)
at edu.apollogrp.fsg.cas.CASClient.getEncodedAndEncryptedStr(CASClient.java:102)
at edu.apollogrp.fsg.cas.CASClient.authenticateCAS(CASClient.java:53)
at oa_html._fndvald._jspService(_fndvald.java:200)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
at oracle.jsp.JspServlet.service(JspServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:595)
Thanks
Shashi

Hi Hussein,
No error in the Apache Log. Any how I have turned the CM off and login seems to be little better so will deploy the CM on seperate node. I upgraded the system from Jinit (1.3) to JRE 1.6.0_24. We are on Developer 6i patchset 18. But now while loaded the forms , it is hanging. I enabled the debug for JRE and got the following error.
I have relink all the executable (all completed successfully). Regeranted JAR with FORCE.
security: Validate the certificate chain using CertPath API
security: Obtain certificate collection in Root CA certificate store
security: Obtain certificate collection in Root CA certificate store
security: Start to check whether root CA is replaced
security: The root CA hasnt been replaced
security: No timestamping info available
security: Found jurisdiction list file
security: No need to checking trusted extension for this certificate
security: The CRL support is disabled
security: The OCSP support is disabled
security: This OCSP End Entity validation is disabled
security: Checking if certificate is in Deployment denied certificate store
security: Checking if certificate is in Deployment permanent certificate store
basic: Applet loaded.
basic: Applet resized and added to parent container
basic: PERF: AppletExecutionRunnable - applet.init() BEGIN ; jvmLaunch dt 558200 us, pluginInit dt 7706667 us, TotalTime: 8264867 us
basic: Applet initialized
basic: Applet made visible
basic: Starting applet
basic: completed perf rollup
basic: Loaded image: jar:http://hostname:8010/OA_JAVA/oracle/apps/fnd/jar/fndaol.jar!/oracle/apps/media/splash.gif
basic: Loaded image: jar:http://hostname:8010/OA_JAVA/oracle/apps/fnd/jar/fndforms.jar!/oracle/forms/icons/oracle_logo.gif
Exception in thread "thread applet-oracle.forms.engine.Main-2" java.lang.NoSuchMethodError: oracle.ewt.lwAWT.lwText.LWTextField.setTextAlwaysLeftAligned(Z)V
     at oracle.forms.engine.Main.initDesktop(Unknown Source)
     at oracle.forms.engine.Main.start(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Thanks

Excel Web Access(An error has occurred.Please contact your system administrator if this problem persists. )

I'm using share point 2007 under windows server 2008 R2(one web server, another db server).When I publish a excel(*.xlsx) to report library or view it in web browser with the same error as bellows:
Excel Web Access
An error has occurred.
Please contact your system administrator if this problem persists.
Please kindly support to guide how to fix it with bellow information in details such as log.Many thanks!
1. The 12/logs file is as bellows:
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Calculation Services    2u7d Medium ExcelServerSharedWebApplication.Local: An exception was thrown by configdb infrastructure: System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could
not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local().
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Services Administration 8tqh Critical Excel Services: Unexpected exception while trying to access Shared Services Database;. Error = ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that
either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context..
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Web Access              6nfi Unexpected InternalEwr.OpenWorkbook - An unexpected exception in the ECS Proxy occurred. Message: Microsoft.Office.Excel.Server.ExcelServerSettingException:
An error has occurred. ---> System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running
outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()     --- End of inner exception stack trace ---     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()
at Microsoft.Office.Excel.Server.ExcelServerSettings.get_Settings()     at Microsoft.Office.Excel.Server.ExcelServerSettings.get_EcsList()     at Microsoft.Office...
2.the event in event viewer is:
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          2014/10/10 9:49:43
Event ID:      4625
Task Category: Logon
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      ***.net
Description:
An account failed to log on.
Subject:
Security ID:  NULL SID
Account Name:  -
Account Domain:  -
Logon ID:  0x0
Logon Type:   3
Account For Which Logon Failed:
Security ID:  NULL SID
Account Name:  ***
Account Domain:  ***
Failure Information:
Failure Reason:  An Error occured during Logon.
Status:   0xc000006d
Sub Status:  0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: ***
Source Network Address: ***
Source Port:  63664
Detailed Authentication Information:
Logon Process:
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length:  0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="">
<System>
    <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
    <EventID>4625</EventID>
    <Version>0</Version>
    <Level>0</Level>
    <Task>12544</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8010000000000000</Keywords>
    <TimeCreated SystemTime="2014-10-10T01:49:43.563436300Z" />
    <EventRecordID>37602685</EventRecordID>
    <Correlation />
    <Execution ProcessID="532" ThreadID="26096" />
    <Channel>Security</Channel>
    <Computer>***.net</Computer>
    <Security />
</System>
<EventData>
    <Data Name="SubjectUserSid">S-1-0-0</Data>
    <Data Name="SubjectUserName">-</Data>
    <Data Name="SubjectDomainName">-</Data>
    <Data Name="SubjectLogonId">0x0</Data>
    <Data Name="TargetUserSid">S-1-0-0</Data>
    <Data Name="TargetUserName">***</Data>
    <Data Name="TargetDomainName">***</Data>
    <Data Name="Status">0xc000006d</Data>
    <Data Name="FailureReason">%%2304</Data>
    <Data Name="SubStatus">0x0</Data>
    <Data Name="LogonType">3</Data>
    <Data Name="LogonProcessName">
    </Data>
    <Data Name="AuthenticationPackageName">NTLM</Data>
    <Data Name="WorkstationName">***</Data>
    <Data Name="TransmittedServices">-</Data>
    <Data Name="LmPackageName">-</Data>
    <Data Name="KeyLength">0</Data>
    <Data Name="ProcessId">0x0</Data>
    <Data Name="ProcessName">-</Data>
    <Data Name="IpAddress">***</Data>
    <Data Name="IpPort">63664</Data>
</EventData>
</Event>

Hi Tracy,
Have you changed something on your SharePoint 2007 environment recently before this issue occurred?
This issue may be related to Alternate Access Mappings settings like the following similar post, if you have configured AAM, you can check if this issue happened to some URLs, if it's the case, please add the problematic URLs as a Publish URLs for the default
zone for your web application, and also add these URLs as trusted locations, then check results again.
If above doesn't work, please enable ULS log on verbose level to get more useful log errors which time are corresponding to the errors occur.
https://social.technet.microsoft.com/Forums/en-US/c9ab4818-65c9-444d-be50-1bfed1f1509b/excel-web-access-web-part-works-on-intranet-but-not-internet?forum=sharepointgenerallegacy
http://blog.bugrapostaci.com/2011/09/08/how-to-enable-verbose-log-mode-on-moss-2007/
Thanks
Daniel Yang
TechNet Community Support

Please contact the system administrator...?

Now, or at least until 5 m ago, this popped up when trying to access the Logic Pro forum:
An error in the system has occurred. Please contact the system administrator if the problem persists.
Useful links :
* Forum Home -- browse the forums here.
* Search Forums -- visit the search page to query all forum content.
I have gotten this again today, and the advice just doesn't make sense without any contact info as to where such a contact should be directed to. This place comes closest.
Two tips/questions: 1. could there be a possibility to report this error added? A link to whoever is responsible for correcting this type of fault?
2. Or, if this is just a generic announcement and it is really not intended for anyone to report anything to anyone, just leave out the whole "Please contact..." part?
regards, Erik.

Hope I won't be accused of highjacking but I have just come across this message when trying to access SL discussions. I've also had problems with accessing discussions in all its forms on Friday/Saturday last. Is there anything out of order at Apple? Out of interest, I do wish Apple would have a 'News' section on the main support page ... or am I missing something?

OAS System Administrator (Full-time job) - Santa Monica, CA

Greetings,
I am a hiring manager at a successful e-commerce company based in Santa Monica, CA who is looking for talented system adminstrators with Oracle Application Server experience.
Our company has created a complete business-to-business e-commerce application built upon Oracle's complete suite of products. We are looking for two positions to support this envrionment, one senior one junior. Training and/or relocation is available for the right candidate.
If you are interested in applying for this position please feel free to email me your resume to [email protected] include "Unix Systems Administrator - Application Operations EIS" in the subject line.
Thanks,
Jeremy Przygode
Director of Application Operations & Support
Edmunds.com
The job description follows:
Major Responsibilities
* Help architect, design, implement and document all production and pre-production application environments. Work with application architects and software engineers to define requirements and standards. Develop and implement plans for deploying new services in a highly automated environment.
* Ability to design and build tools to support a dynamic production website
* Provide day to day operational support for all production and pre-production applications
* Play leadership role in project planning, design and implementation of new services and applications
* Work with teams to improve manageability of internally developed applications
* Be knowledge expert on various third party applications (especially Oracle Application Suite)
* Release internally developed applications across many environments
* Work with teams to investigate and improve security as it relates to applications and processes
* Participate in 24x7 on-call support for the companys production systems
* Actively participate in the development and improvement of a monitoring system(s)
* Maintain effective working relationships with other IT Staff members, internal customers and technical staff at collocation providers
* Mentor junior staff on technology and best practices
* Ability to anticipate and proactively manage issues before they become major problems
Required Skills
* In-depth system administration experience with Linux or Solaris operating systems running e-commerce applications
* Experience maintaining and deploying environments with Oracle Application Suite and Oracle database servers
* Strong knowledge of Unix shell scripting
* Production website operational experience
* Experience working with ticketing systems and change management processes
* Ability to be a member of a close-knit team that shares responsibilities for all areas it supports
* Excellent verbal and written communication skills, including the ability to produce usable and maintainable documentation
* Demonstrate problem solving abilities and initiative
* Ability to deliver projects on schedule
* Strong knowledge of networking as it relates to systems, security and availability
* Ability to provide a professional interface to internal and external customers and vendors
Preferred Skills
* Extensive Oracle Application Suite experience (Oracle OID, BPEL, Portal, Toplink, OC4J, OEM)
* Strong scripting and automation experience
* Light Oracle database administration experience
* Linux certification or Linux expert
* Network Operations experience
* Operational experience with Oracle 9i and 10g databases on Linux
* Knowledge of networking and HA technologies, like F5 Labs BigIP?
* Windows application knowledge and familiarity with Windows Server (AD) infrastructure
* Must understand risk management practices and how they apply to service level agreements
* Experience with ITIL processes

My Craigslist post expired so here are the contents.
I am currently accepting new contracts for my consulting business. I
offer an extensive range of services oriented around the LabView
software and National Instruments hardware. Circuit design for
integration of external transducers and control units is also
available. I can do PCB layouts and fabrication for professional
quality circuit construction. Signal processing and data analysis are
also my forte.
I am employed full-time so the scope of the project must be such
that my participation is limited to weeknight evenings and weekends. I
live in the East Bay and willing to travel during the weekends.
I have a PhD in bioengineering from UC Berkeley and roughly 8 years
of experience within the services I offer. I will give you an honest
judgment if the project scope is within my ability and if your time
frame is achievable with a nights & weekends effort.
My services are offered at a competitive market rate.
bnjohnso
at
socrates
dot
berkeley
dot
edu

Im trying to uninstall itunes because the newest version wont download. But when i go to uninstall, it says "The system administrator has set policies to prevent this uninstallation" Whats can i do to uninstall

Im trying to uninstall itunes because the newest version wont download. But when i go to uninstall, it says "The system administrator has set policies to prevent this uninstallation" Whats can i do to uninstall

Windows right?
Likely your not the administor any more, the botnet is.
Check on this site really quick if your part of a botnet
http://botnetchecker.com/
All clear? Hopefully. Backup your files to a external drive, cd or dvd, USB keye etc off your computer.
Run the sfx file on this site and it will burn to a cd.
http://www.avira.com/en/support-download-avira-antivir-rescue-system
Next hit your BIO's key and set the cd to boot first, run the scanner and see what it pops up.
If your all clear then create another Admin, transfer your files over from the first Admin.
See if that works, eventually when your totally over to the new Admin, delete the old one.
If you can't create a new Admin, find out who locked your machine down, like your parents or it's a school computer?
Likely installed spyware or "nanyware" to watch you.
Hope that works.

Organization O 50000716 is not a purchasing group; inform system administra

Dear Expert,
Need your help, we using SRM 7 with extended classic scenario, we use workflow for PO with 3 levelling (if the value of po more than 200 million Rp). now, there is no problem when we approve this po for approver 1 and approver 2. but when the approver 3 want to approve this PO, these error show up:
Organization O 50000716 is not a purchasing group; inform system administration ( i actually have assign a purchasing group in function tab for this organizational unit )
System of purchasing organization O 50000658 and purchasing group O 50000716 differ (there is a different with the company code for O 50000658 (cc:1000) & O 50000716 (cc:1100)) but i'm not sure this is the cause.
best regards,
Melynessa

Hi Melynessa
Did you maintained a purchasing organization for the approver 3? A purchasing group and a purchasing organization are needed.
Try to compara the information of approver 1 and 2 with approver 3 (PPOMA_BBP, SU01, etc).
I hope this helps.
Christian Zeuch

Passed 310-200 (OCP Solaris 10 System Administration, Part I) Exam!!!

Similar Messages

Maybe you are looking for