Passing data from webdynpro to BSP

Hi Experts,
Can anyone tell me is there any possibility of passing data from webdynpro to BSP and vice-versa.
If so, kindly let me know.
thanks a lot.
regards
vijay

Two possible options, not sure however how this will work in practice.
1. use the URL and pass additional parameters (http://help.sap.com/saphelp_nw70/helpdata/EN/7b/fb57412df8091de10000000a155106/content.htm)
2. If in portal, do via portal eventing (http://help.sap.com/saphelp_nw70/helpdata/EN/f6/7d6f4151dc5758e10000000a1550b0/content.htm)

Similar Messages

Passing of data from webdynpro to BSP

Hi Experts,
Can anyone tell me is there any possibility of passing data from webdynpro to BSP and vice-versa.
If so, kindly let me know.
thanks a lot.
regards
vijay

Hi Vijay,
if the BSP application and WebDynpro application both run in the same SAP ABAP instance you can use server-side cookies.
Just because sside-cookie functionality was built for BSP there is no reason you can't use them for any ABAP application.
Cheers
Graham Robbo

Passing data from one bsp application to another

Hi,
I have few queries that most of you would have done in ur projects:
1. I want to pass data from one bsp application to another:
eg based upon selected row of table view which populates material no and descriprion to another application which open the entire material master data.
Now, i have both the pages in diff bsp applications in place but unable to pass the selected material code to the second bsp application.
Had it been two different pages of same application I was able to achieve it with set parameter()
2. To stop the application from reprcessing the data:
eg: Suppose I have a bsp page where user fill details of a customer and on submitinng the details a customer is created in background and the entire page is disabled by my code. Even now if the user press refresh (F5) button then another customer gets created in the background. So basically i want to avoid the reprocess of the onSubmit event
Few lines of sample code would be very helpful.
Best Regards,
Saurabh Tripathi

Hi,
When I am writing the following code in appl1/page1:
        export abc from transactionID
        to data buffer lv_page_data.
        CALL METHOD CL_BSP_SERVER_SIDE_COOKIE=>SET_SERVER_COOKIE
          EXPORTING
            NAME                  = 'TRANSACTIONID'
            APPLICATION_NAME      = RUNTIME->application_name
            APPLICATION_NAMESPACE = RUNTIME->application_namespace
            USERNAME              = ls_name
            SESSION_ID            = runtime->session_id
            DATA_VALUE            = lv_page_data
            DATA_NAME             = 'lv_page_data'
and following code in appl2/page2:
CALL METHOD CL_BSP_SERVER_SIDE_COOKIE=>GET_SERVER_COOKIE
    EXPORTING
      NAME                  = 'TRANSACTIONID'
      APPLICATION_NAME      = RUNTIME->application_name
      APPLICATION_NAMESPACE = RUNTIME->application_namespace
      USERNAME              = ls_name
      SESSION_ID            = runtime->session_id
      DATA_NAME             = 'lv_page_data'
    CHANGING
      DATA_VALUE            = lv_page_data
   IF lv_page_data IS NOT INITIAL.
     IMPORT abc to transactionid
       FROM data buffer lv_page_data.
   ENDIF.
still the code doesn't work. Please explain and guide
Best Regards,
Saurabh Tripathi

Passing data from report to abap webdynpro

Hello,
I'm calling an abap webdynpro from an abap report through CALL_BROWSER MF.
I need to pass data from a report to a webdynpro. It is a table that I want to pass. I've tried to user memory ids, but as I was suspecting, it doesn't work.
Is there a way of doing it?
Thanks and best regards,
Vasco Brandã

Hi,
Please read this thread : Is it possible to pass a table as input parameter to a web dynpro app?
Regards,
Pierre

How to pass data from offline form to webdynpro java

Hi,
Please suggest me how to pass data from offline from to webdynpro java node?
i am using the below code to pass data from offline form(after entering values in the form) to node . i am using form upload ui element to upload offline form and after that i am providng a button to update data.But still i am not able to see data in the node.Any suggestions on this.below code is wriiten on action of the button.
wdContext.currentContextElement().setPDFSource(null);
       try
            if(null!=wdContext.currentContextElement().getAttributePointer("Resource"))
       IWDResource fileResource = wdContext.currentContextElement().getResource();
     if("PDF".equalsIgnoreCase(fileResource.getResourceType().getFileExtension()))
       byte[] b = new byte[wdContext.currentContextElement().getResource().read(false).available()];
       wdContext.currentContextElement().getResource().read(false).read(b)                     wdContext.currentContextElement().setPDFSource(b);
       WDInteractiveFormHelper.transferPDFDataIntoContext                 (wdContext.currentContextElement().getPDFSource(), wdContext.nodeVn_TestData());
                 else
                      wdComponentAPI.getMessageManager().reportException("Please enter correct file");
            else
                 wdComponentAPI.getMessageManager().reportException("Error while uploading file");
       catch (Exception e) {
            wdComponentAPI.getMessageManager().reportException
            ("Error in uploading the Adobe Form :"+e.getLocalizedMessage(),false);
Regards,
Pavani

If you choose the second alternative you should erase these global variables after the second form is opened
You can erase the global variable using:
erase('global_var')
Greetings,
Sim

How to access internal table data from webdynpro to Flex application.

Hi Connoisseur
The data transfer from Abap WebDeypro to flex island works well. I followed , there is an example from Thomas Jung (by the way as always Great Work) and Karthikeyan Venkatesan (Infosys) but this example covers simple type only.
There is no example with complex types like arrayCollection which handle the transfer of data from flex to WebDynpro.
i tried to do pass internal table value to flex-datagrid.but its not work.
i would like to know
1.how to access internal table data from webdynpro to Flex application.
2.how to pass the internal table to flex-datagrid.
2.how to pass dynamically in ADOBE flex.
3. how to do Flex is receiving the wd context data?
4. how can we update WD context with FLEX data.
Ple give me sample example and step by step procedure.
Regards
laxmikanth

Hi Laxmikanth,
Please refer this...
Flash island: update complex type from flex
Cheers..
kris.

Passing parameter from workitem to bsp page

Hi,
is it possible to pass parameter from workitem to bsp page and also vice versa?

SAP_WAPI_READ_CONTAINER function works well.but i need to pass a parameter to workitem container.
what i am trying to do is;
1-get data by using sap_wapi_read_container
2-change data
3-send changed data back to workitem
my problem is in third step.I am using SAP_WAPI_WRITE_CONTAINER. but it doesnt work.After execution the FM return_code set to 1.
Do u know how to set a variable in workitem?

Problem in passing data from one .jsp page to another .jsp page

i have a problem here
Actually i have 2 jsp pages. What im trying to do here is actually i want to pass data from the first jsp page to the second for updating
The first jsp page contains data that user wants to update in the form of table.
<td><img src = "edit.gif" alt = "edit" border="0" ><td>
<TD><%= Name %></td>
<TD><%= rs.getInt("Age") %></td>
<TD><%= rs.getString("Gender") %></td>
So this page displays the data that users wants to update plus one image button (edit button). So when user clicks this button, all the data in this page will be brought to the second .jsp page called updatePersonal for updating.
The problem here is that it is not displaying the existing data in the second .jsp page.
The second page basically contains forms
<INPUT TYPE="text" NAME="FirstName" maxlength="30" value = "<%=FirstName%>">
Can someone please help me. I really dont know what to do..How do i get the data displayed in the text field that is passed from the first .jsp page..thankx in advance

Please modify below code to:
td><img src = "edit.gif" alt = "edit" border="0" ><td>
-----------------modified code
td><a href="updatePersonal.jsp?FirstName=<%=rs.getString(FirstName")%">&LastName=<%=rs.getString("LastName")%>&Age=<%=rs.getInt("Age")%>&Gender=<%=rs.getString("Gender")%>"><img src = "edit.gif" alt = "edit" border="0" ></a><td>
I'm sure it works</a>

How to get the complete data from Webdynpro using a RFC

hi guys,
A form is created in the webdynpro, when that pdf form is called the user have to provide the key field ie the employee number in the form and then when he press the 'go' button a rfc is called and it gives all the details of the employee in the form. Then the user have to input some fields in the form and he have press the submit button. My problem is here, when the user is going to press the submit button that form will be converted to a stream (binary) of data and it is sent to one of the import parameter used in the RFC.
I have created a RFC and created a import parameter of data type XSTRING, since i want to see what exactly R3 is receiving from web dynpro i am writing this contant in the sever as a text file. When i saw that text file i cant see the complete data.
And when i searched in R3 the capacity of xstring is 1024 CHAR, so i dont know how to capture the entire data from webdynpro into my R3.
I give the code what i worte please tell me am i missing anything in my code, or is there any data type which can hold more than 500kb of data which is coming from webdynpro.
FUNCTION ZSEND_MAIL_ATTACHMENT.
""Local Interface:
*" IMPORTING
*"     VALUE(OUT_PLACE_LEVEL) TYPE XSTRING OPTIONAL
*"     VALUE(BIN_DATA) TYPE INDX_CLUST OPTIONAL
*" TABLES
*"      IT_MESSAGE STRUCTURE SOLISTI1
Data Declaration
DATA: gd_cnt TYPE i,
      gd_sent_all(1) TYPE c,
      gd_error TYPE sy-subrc,
      tab_lines LIKE sy-tabix.
Structure Declaration
DATA : BEGIN OF it_file OCCURS 0,
          row(255),
         END OF it_file.
DATA : BEGIN OF i_split OCCURS 0,
row(50),
END OF i_split.
Internal Table Declaration
data : it_receivers like table of SOMLRECI1 with header line."occurs 0.
DATA : objbin LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE. "sOLIX
DATA : it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
data : wa_receiver like table of SOMLRECI1 with header line.
data : it_receiver like table of SOMLRECI1 with header line.
data : v_bin_data like SOLISTI1 occurs 0 with header line.
DATA : gd_doc_data LIKE sodocchgi1 OCCURS 0 WITH HEADER LINE.
*data bin_data1 like table of solix with header line.
REFRESH : objbin, it_packing_list, it_receivers, wa_receiver.
CLEAR   : objbin, it_packing_list, wa_receiver, it_receivers.
DATA V_SUBJECT(255) VALUE 'HI'.
gd_doc_data-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( it_message ).
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SENDFILE'.
gd_doc_data-obj_descr = v_subject.
gd_doc_data-sensitivty = 'O'.
APPEND GD_DOC_DATA.
Appending The Internal Table it_packing_list
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'RAW'.
it_packing_list-body_num = tab_lines.
APPEND it_packing_list.
*CALL FUNCTION 'GUI_UPLOAD'
*EXPORTING
*filename = V_FILE_PATH
*filetype = 'BIN'
*TABLES
*data_tab = BIN_DATA.
move bin_data to v_bin_data.
append v_bin_data.
*move soli to bin_data.
LOOP AT V_BIN_DATA into objbin.
MOVE v_bin_data TO objbin-line.
    APPEND objbin.
ENDLOOP.
CLEAR it_packing_list.
DESCRIBE TABLE objbin LINES tab_lines.
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num = 1.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'PDF'.
it_packing_list-body_num = tab_lines.
it_packing_list-doc_size = tab_lines * 255.
APPEND it_packing_list.
data file(255) value '/tmp/bali.txt'.
*Appending The Internal Table it_receivers
close dataset '/tmp/bali.txt'.
open dataset '/tmp/bali.txt' for output in text mode encoding default.
if sy-subrc = 0.
loop at objbin.
transfer objbin to '/tmp/bali.txt'.
endloop.
else.
write 'hi'.
close dataset '/tmp/bali.txt'.
endif.
it_receiver-receiver = '[email protected]'.
it_receiver-rec_type = 'U'.
it_receiver-com_type = 'INT'.
APPEND wa_receiver.
move wa_receiver[] to it_receiver[].
append it_receiver.
*Move wa_receiver[] to it_receivers[].
Clear it_receivers.
if i_OUT_PLACE_LEVEL NE 0.
loop at it_receivers into wa_receiver.
   loop at it_receivers into wa_receiver.
**Function Module To Post The Message To Externa Mail
     CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
         document_data              = gd_doc_data
         put_in_outbox              = 'X'
         commit_work                = 'X'
       TABLES
         packing_list               = it_packing_list
         CONTENTS_TXT               = objbin
         receivers                  = it_receivers
       EXCEPTIONS
         too_many_receivers         = 1
         document_not_sent          = 2
         document_type_not_exist    = 3
         operation_no_authorization = 4
         parameter_error            = 5
         x_error                    = 6
         enqueue_error              = 7
         OTHERS                     = 8.
     clear wa_receiver.
ENDFUNCTION.

You have to convert your long string to a table of shorter strings.
There may be other ways, but one possibility is to use a loop to process you string.
while (there is something left)
   put the next e.g. 1024 characters in a new row of your table
endwhile
If you need to reconstruct your string from the table, don't use simple concatenation since it will remove blanks at the end of lines. Believe me (from experience) sooner or later this will happen.
Instead you need to either set the subsections of your long string, or insert from the end of your table and keep shifting the contents (probably less efficient) right

How can I pass data from a form guide to another form in a business process

How do we pass data from a form guide to another form(not necessarily a guide) without having to open the form. For example we have a small form guide to capture the contract id so we can then get data from contracts table to present to the user in a form. We want the user to open the guide (either Flex guide or form guide) to enter the contract id. Upon submission we want the process to get the contract data and put it into the form that will be opened at the next step by the user without having a user interact with the form to get the data into it. In other words we need the process to get the data and populate a different form than the form guide the contract id was entered in and this new form needs to be opened in the next step by the user.

Firstly, I'm assuming that you have a Forms ES Server if you are rendering a Guide. This could be either version ES1, ES2/2.5 or ES3/ADEP
If you submit the form back to the server, you can populate a second (PDF/XDP) form with the data bound to the same schema/Data Model using Forms ES.
You referred to the next user in the chain - If you are using Process Management, this is very easy, as you define what form is used to render the data in the "Presentation & Data" section of the Assign Task activity

I need to pass data from an Access database to Teststand by using the built in Data step types(open data

base /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1i need to pass data from an Access database to Teststand by using the built in Data step types(open database /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1
When I tried the same thing on another cmputer the same thing
happend
appreiciate u"r help

base /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1Hello Kitty -
Certainly it is unusual that you can still see the tables available in your MS Access database but cannot see the columns? I am assuming you are configuring an Open Statement step and are trying to use the ring-control to select columns from your table?
Can you tell me more about the changes you made to your file when you 'changed' it with MS Access? What version of Access are you using? What happens if you try and manually type in an 'Open Statement Dialog's SQL string such as...
"SELECT UUT_RESULT.TEST_SOCKET_INDEX, UUT_RESULT.UUT_STATUS, UUT_RESULT.START_DATE_TIME FROM UUT_RESULT"
Is it able to find the columns even if it can't display them? I am worried that maybe you are using a version of MS Access that is too new for the version of TestSt
and you are running. Has anything else changed aside from the file you are editing?
Regards,
-Elaine R.
National Instruments
http://www.ni.com/ask

Passing data from a panel to a frame / disposing of a frame from in a panel

Hello, I have recently created a program where all windows are made of seperate frames, now, to make the whole thing a bit more appealing and professional looking, i'd like to make 1 main frame, and load my content panels into this 1 frame. Problem i'm having with this is passing data from the loaded in panel to the main frame, so the main frame can hide one panel to load another with data inserted in the first panel. OR another solution to my problem would be a way to dispose of a frame, but from within the seperate panel class. I have searched the www for a solution, but haven't found one so far, so, any suggestions or references to some info about this kind of issue? Any pointer is greatly appreciated

kennethdm wrote:
EDIT: I took a look at the cardlayout, and, although i see its relevance to my question, it still leaves me with the question how exactly i will pass data the user inputs into the first panel, to the second panel. The second panel is built by the info which is provided in the first panel.Stop thinking of them as Panels and start thinking of them as OOP objects that have data that must be shared. It's often a matter of using getters and setters and sometimes requiring a sprinkling of the Observer design pattern.

Passing data from one frame to another frame

hello all, i am having a problem with passing data from one frame from another. I have a main frame when you click on connect button it display the second frame(class) that has 2 text fields and 2 buttons. When i click on connect it check if the data is correct. If the data is correct i want that frame to close and pass the data back to main frame. How can i do that.
thank you

hello all, i am having a problem with passing data
from one frame from another. I have a main frame when
you click on connect button it display the second
frame(class) that has 2 text fields and 2 buttons.
When i click on connect it check if the data is
correct. If the data is correct i want that frame to
close and pass the data back to main frame. How can
i do that.
thank you
the original problem sounded like an ideal opportunity to use Modal Dialog. if you want one frame to display another to get user input then you need to stop the method in the main frame from executing until you recieve a valid input.
you can use your own class and keep all of the components that you have in the connect frame but you would have to extend JDialog instead of JFrame.
there is a way around it!
if you must use JFrame for both, then you need to have access to the main frame in the connect frame, maybe pass the pointer to the constructor??
anyway, when the connect frame is done with its duties, you have to use the pointer to call another method in the main frame that will continue the process. otherwise main frame doesn't know when connect frame is done and by that time, the method in main frame that instantiated the connect frame has long since died.
also, it allows things to happen in the other window that you may not want to happen until the connect frame is done
typically users of software start clicking around on things and you could have three or four connect frames going at the same time
it's really best to use a Modal Dialog, it really can look just like a JFrame!!!!!!!!!!!!!!

Passing data from a container to another

Hi,
Let's say I have two containers (Container1=application , Container2). Container1 gets some data from user, perform some database lookup and displays Container2 with the results from database lookup.
Container1 --(call and display)--> Container2
Below shows how I am using a bindable variable in Container1 to pass the data from Container1 to Container2. Also shows how I display Container2 from Container1.

<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
   [Bindable] public var foo:String = "bar";
   private function loginHandler(event:LoginEvent):void
      mycontainer2 = new Container2();
      mycontainer2.name = "mycontainer2";
      this.addChild(mycontainer2);
</mx:Application>
I am accessing the data in Container2 as follow:

{mx.core.Application.application.foo}
Q1) Is there a better way to pass data from one container to another and access the data?
Q2) Is this the only way to call and display Container2 from Container1?
Q3) How can I move back to Container1 from Container2, i.e. Container2 call and display Container1
       Container2 --(back to)--> Container1

Best practices call for using custom events to share data between components. Here is my Flex 3 Cookbook post on the topic:
http://cookbooks.adobe.com/index.cfm?event=showdetails&postId=15466
To switch easily between containers 1 & 2 use a ViewStack, the gold standard for such interaction, and manipulate the selectedIndex or selectedChild property:
http://livedocs.adobe.com/flex/3/html/help.html?content=navigators_3.html
If this post answered your question or helped, please mark it as such.

Is it possible to pass data from a subVI before that subVI has finished executing?

Basically this is my problem:
1. I have a subVI which contains a loop that reads data from a device for a specified amount of time.
2. I would like to graph this data in real time on the front panel of the main VI.
So is there a way to pass data from inside the loop of my subVI to the graph of my main VI before the subVI has finished executing, and if so how do I do this?
Thank you.

How about using a global variable or a Queue?

Passing data from webdynpro to BSP

Similar Messages

Maybe you are looking for