Passing messages from BW customer-exit variables to WebI

Hi
Is it possible to pass messages from a BW customer-exit variable to WebI?
We have a scenario where we have some validation done on a customer-exit variable, and under certain conditions a message should be returned to the user running the WebI report. Ideally, then report should stop executing at this time.
The ABAP is in place, and I can return an error message. If the query is run in RSRT / Web Template, the error message is correctly displayed and processing stops.
However, in WebI, if the error condition is met, a rather messy looking generic error message is displayed. In this case, the error number I've used in the ABAP is 000, which WebI then interprets as somthing to do with query dimensions could not be retrieved, or a null pointer exception.
I am not interested in the WebI error message that is being generated ... I know why it is being generated.
All I'd like to know is whether it is possible to pass an error message from within the customer exit code back to WebI.
Any ideas?
Regards,
Andrew

Hi,
I think that the problem is the User Exit is called anew for every query, so the global tables you declared will be empty for the query2.
One way to do this is create a table using the SE11 and populate it with the Variable from Query1, and use this data to populate the Variable2 of Query2.
Hope it helps.

Similar Messages

Population of Customer Exit Variables in Web Template Queries

Hello,
Desired Scenario:
I have three Queries: Q1, Q2, Q3, attached to one Web Template in the same order. Queries Q2 and Q3 have exit variables which are populated from the Input Variable of Query Q1 (these customer Exit variables are mandatory, not available for user input and are populated in STEP=2).
Problem:
Sometimes on execution of the template, Q1 is executed first and then the exit variables are populted (which is OK) BUT sometimes Query Q2 or Q3 is executed first and exit variables don't get populated.
As such, I am not sure of the order these three queries are executed. Please suggest how do I ensure that Q1 is always executed first, followed by Q2 or Q3.
Thanks for your suggestions.
Best Regards,
Sumita

Hi,
The Infoobjects are different in all the three queries. In Q1, the variable is on 0CALWEEK. In Q2, the variable is on XWEEKD (which is reference to 0CALWEEK). IN Q3, it is on XFORWEEK (which is again reference to 0CALWEEK). So, I can't use the same variable in all three queries. But all these variables have to have the Week from to Week To as the input and that input remains same for all three variables.
To prevent the user from entering this week from & to thrice, we populate the other two in customer exit depending on the value input by the user.
So, now I want to know the order in which the queries attached to a Web Template are executed.
Best Regards,
Sumita

Default value of BeX customer Exit variable not Displayed in WeBI??

Hello Experts,
We are stuck with a problem where WeBI report is created on top of BeX query and we are not able to see the default value of Bex Customer exit variable in WeBI run. Here is the complete scenario:
1. One restricted KF is created in BeX, restricted with Customer exit variable on net Due date. And this variable is mandatory, ready for input, and Default value in calculated is user exit as current Week's Monday.
2. So, by default KF data should be restricted to Monday of current week, if user does not change this value.
3. Now, WeBI report is created on top of this Bex query, and all is working fine, i.e. we are getting variable as Prompt in WeBI, but Default value is not shown while Running the Webi Report.
So, need your inputs on the same, if default values from BeX in WeBI is supported or not? If yes, why this is happening, and how to resolve it?
Please notice, the restrcition is in KF only, it is not a separate restrcition on Net Due date in Filter area or in Defualt area of BeX
and we are on SAP BW 7.1 and BOXI 3.1 SP4.
Regards,
Vipul
Edited by: VIPUL GOYAL on Nov 23, 2011 9:44 PM

Hi,
See 1285993 - Support of Customer Exit Variables from BEx query into WebIntelligence via OLAP universe
WebI will prompt when executed, but the default values calculated by the user exit - do not appear.
Note: If the BEx variable has property 'ready for input' set / enabled, then its WebI prompt shows ok, but no default value appears.
Cause
This behaviour expected 'by design' (in the context of the product's current limitations) as explained in the online guide below:
Please refer to Chapter 7, page 44, document link here: http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_sap_olap_universes_en.pdf
Characteristic variable > processing type > Customer Exit is "Supported, without user entry"
--> This should be understood as meaning "User will not be shown a prompt"
regards,
H

Using Formula Variable in Customer Exit variable

Hi,
I want to assign valuees of 2 Formula Variables to one cstomer exit variable based on some Characteristic.
Example. Formula variables are Early and Late. If Early = 3 and Late = 4 , I want to pass value to the Customer Exit variable as Low = 3 and High = 4.
The problem is in I_T_VAR_RANGE there is no value for formula variable in LOW field.
Other variables based on Characteristics have values in this field.
What can I do in this case?
Regards
SSS

SSS,
You can restrict your characteristic with two variables in the value range options of restricting.
One can be used as low and the other can be high.
Hope that helps.
Thanks.

Error creating Customer Exit variable, please help

Hi Experts,
This is the scenario, I need to obtain the convertion rate from the table TCURR in order to convert several currencies to USD, so I created a Customer Exit variable that gets the Period and based on that obtains the conversion rate for the last day of the given month from TCURR, the problem is when I created the Formula Variable to get the value from the Customer exit variable I got the following error:
'ZVARREGEXIT' ALREADY EXISTS; SELECT A DIFFERENT NAME.
But in not using that name anywhere on my variables creation, Im doing something wrong? How can I check wheres is that variable being used.
Ideas, comments are always welcome and appreciated.
Regards.

Hi Ed,
Open Admin Workbench (RSA1) and choose Transport Connection --> Object Types --> Query Elements --> Variable --> Select Objects. Find the variable of interest and transfer it back to the main screen, then right-click and choose 'Display Description'. That will show you a "where used" list of queries, workbooks, etc.
Next, you can use the previous technique to open one of the queries, find the variable in the query, and determine which InfoObject it is associated with.
Hope this helps!
Regards,
Saurabh

Executing customer exit variable in dropdown box. in WAD

hi Experts,
i have implemented two customer exit variables for current month and next síx months in a query and it is working well, and the code for customer exit variable is correct.
we have a requirement to use the customer exit variables in dropdown box in web application designer. in the dropdown box in web application designer i used command SET_SELECTION_STATE_SIMPLE in that 'command specific Parameters' i had given the exit variables current month and next six months.but after executing the web application designer and if i drill down the report with current month and next six months it's giving error message .
can anyone please tell me how to implement customer exit variables in web application designer through drop down box. i am using this in bi7 reports.
Regards
Sruthi Reddy

Hi,
Customer Exit Variable in SAP BI : is used to calculata MTD,YTD, and some other calculations.
You can define variables with Customer Exits and then write code in CMOD. See the Article/Blogs in the same
https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
CHeck the Following Articles.
Customer Exit Variables in BW/BI Reports
Using Customer Exit Variables in BW or BI Reports Part - 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/using%20customer%20exit%20variables%20in%20bw%20or%20bi%20reports%20part%20-%201.pdf
How to use Customer Exit Variables in BW Reports: Part - 2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/g-i/how%20to%20use%20customer%20exit%20variables%20in%20bw%20reports%3a%20part%202.pdf
Using Customer Exit Variables in BW/BI Reports Part - 3
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10fc4382-afa6-2c10-1380-fa224fe4324f&overridelayout=true
Using Customer Exit Variables in BW/BI Reports: Part - 4
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0fefc77-40e3-2c10-8da3-d4bfcb013387?quicklink=index&overridelayout=true
Calculating the Ageing of the Materials
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/calculating%20the%20ageing%20of%20the%20materials.pdf
Thanks
Reddy

BW customer-exit variable in WebItnelligence

Hi all.
Did anybody try to use BW customer-exit variables in WebI report. In documentstion I've found that this type of variable 'supported without user entry', what does it mean?
Thanks.

Hi,
Yes, I have used BW queries in which a customer-exit variable was used and that works fine in WebI.
When you define variables in BW, there is a checkmark saying "Variable is ready for input", i.e. BW customer exit variables are only supported in BO, when this checkmark is not set (which means, that the user can not enter a value directly for the variable).
Best regards,
Jacob

Error Message : " No value could be determined for Customer Exit Variable "

Hello BI Experts ,
I have created a "ZYTD_PERIOD" Customer Exit Variable Interval Mandatory and ready for input check mark removed.
The reference character is '0FISCPER' .
I want to have YTD figures when the user enter single Fiscal Year Period for variable 0P_FPER.
So I have written below code in SE37 : EXIT_SAPLRRS0_001 and include program : ZXRSRU01
==================================================================
case i_vnam.
              WHEN 'ZYTD_PERIOD'.
              IF I_STEP = 2.
              LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = '0P_FPER'.
              CLEAR L_S_RANGE.
              L_S_RANGE-LOW0(4) = LOC_VAR_RANGE-LOW0(4).
              L_S_RANGE-LOW+4(3) = '001'.
              L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
              L_S_RANGE-SIGN = 'I'.
              L_S_RANGE-OPT = 'BT'.
              APPEND L_S_RANGE TO E_T_RANGE.
              EXIT.
              ENDLOOP.
              ENDIF.
===================================================================
After that I use this 'ZYTD_PERIOD' variable in the query .
Also I have used the variable 0P_FPER in another structure.
When I execute the query by entering the value of 0P_FPER as 010.2009 or any other value ,
I am getting below error message ,
*No value could be determined for variable ZYTDPERIOD*_
Below is details of this Error message ,
Note that I have proper Master and Text data for 0CO_AREA and 0COMP_CODE loaded into BI.
=======================================================================
Diagnosis
This error diagnosis is specific only to the variables 0P_FVAEX or 0P_CTPCA !
Termination message BRAIN 632 appears:
Could not determine value for variable 0P_FVAEX (or 0P_CTPCA).
System Response
1. Operation method of SAP-Exit-Variables 0P_FVAEX or 0P_CTPCA
With queries from the CO application, both SAP-Exit-Variables look for an entry for 'controlling area'. With this controlling area from the selection screen, the SAP-Exit-Variables program reads the attributes for InfoObject 0CO_AREA (controlling area).
With queries from the FI application, the SAP Exit Variable 0P_FVAEX looks for an entry for 'company code'. With this company code from the selection screen, the SAP Exit Variables program reads the attributes for InfoObject 0COMP_CODE (Company Code).
0P_FVAEX determines the fiscal year variant (attribute 0FISCVARNT) from the attributes for 0CO_AREA (CO queries) or 0COMP_CODE (FI queries). 0P_CTPCA determines the currency type of the profit center local currency (attribute 0CURTP_PCA) from the attributes for 0CO_AREA.
2. Cause of Error
The attributes for the controlling area (InfoObject 0CO_AREA) or company code (InfoObject 0COMP_CODE) were not loaded into the BW system, or the attributes for the controlling area are not active in the BW system.
Check whether this is the cause of the error in your BW system. Display the contents of table /bi0/mco_area or /bi0/mcomp_code using transaction se16.
Application CO:
Check whether the attributes 'fiscal year variant' (field FISCVARNT) and 'profit center local currency currency type' (field CURTP_PCA) are filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant in the OBJVERS = 'A' is empty, then the error is with variable 0P_FVAEX. If the currency type of the profit center's local currency in OBJVERS = 'A' is empty, then the error is with variable 0P_CTPCA.
Application FI:
Check whether or not the attribute 'fiscal year variant' (field FISCVARNT) is filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant is empty in OBJVERS= 'A', then the error is with variable 0P_FVAEX.
Procedure
Using InfoSource 0CO_AREA, load the attributes for the controlling area or company code into your BW system.
Afterwards, activate the attribute changes in your BW system. To do this, use transaction rsa1, path 'Tools > Hierarchy/Attribute changes', functions button 'InfoObject list'. Choose InfoObject 0CO_AREA or 0COMP_CODE from this list, and activate the attribute changes.
=====================================================================================
Is there any special settings needed before writing BEx Customer Exit ?
I have already created a project in CMOD and assinged a proper RSR00001
and EXIT_SAPLRRS0_001 and project is active.
Any help please ....
Regards ,
Amol

My Code is as below ,
          case i_vnam.
              WHEN 'ZYTD_PERIOD'.
              IF I_STEP = 2.
              LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = '0P_FPER'.
              CLEAR L_S_RANGE.
              L_S_RANGE-LOW0(4) = LOC_VAR_RANGE-LOW0(4).
              L_S_RANGE-LOW+4(3) = '001'.
              L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
              L_S_RANGE-SIGN = 'I'.
              L_S_RANGE-OPT = 'BT'.
              APPEND L_S_RANGE TO E_T_RANGE.
              EXIT.
              ENDLOOP.
              ENDIF.
              ENDCASE.

Customer Exit Variable to fetch the data from the cube..

Hello Gurus,
I am having a requirement to select the latest changed record from the cube while executing the query. where we are having the Calday as the date with a variable .
I suggested my client we can filter it at the DSO leve or Data loading level but my client dont want to distrurb the existing design so he want to perfrom the changes at the Query level only.
For Example we are having below records in the cube.
PO             Material     Calday       Qty         Price
101            ABC          1/12           100         10
101            ABC          2/12            100         10
101            ABC          3/12            100         11
I am having Calday in the selection screen as the variable.
Now from the above example i need to show the record which has been changed on 3/12.
For this i am planning to write the customer exit variable on the calday , when the user enter the range of Calday then i will fetch the whole records which fall in between the range and i will sort each PO with respect to the date and i will pick those which are the latest records.
My Concerns:
!. Kindly let me know if it is possible and what are the other things that i need to consider.
2. Did it will impact the performance.
Waiting for your quick replies
Thanks & Regards
KK

Hi Mate,
Sorry for late reply.
By d way in your word.
initially when the user enter the date range as the vairable input. suppose 1/12 to 31/12 then i will pick all those records which fall in this range.
suppose the records are
PO Date
P1 01/12
P1 02/12
P2 02/12
P2 03/12
P3 03/12
P3 04/12
In the customer exit variable Now for each PO i will sort the date in ascending order and i will pick the last record to display it in the Report.
The ouput will be
PO Date
P1 02/12
P2 03/12
P3 04/12
Now hope you are aware about exit variable concept.
so what value will pass in the calday filter.
here after sorting on each PO , you will get 3 different dates, 02/12 for P1
03/12 for P2
and 04/12 for P3
Now if you are aware about exit variable concept, then you will pass this three date to CALDAY(I_t_VAR_Range-low = ...)
but how query will understand that for P1 calday filter value is 02/12, for P2 calday filter value is 03/12.... and so on...
actually i have also experienced this kind of issue 1-2 years before, i have tried same thing at that time without thinking and stuck with this problem..
By d way you can also learn from your mistake.. so just try ur logic and then you will understand what is the problem?
By d way this will not work, parallel you can work on other solution.

Display Error Message in BW Report based on Customer Exit Variable

Hi
I need to display an error message in the BW report based on the value of a customer exit variable - i was able to do this successfully in BW3.5 using the below code.
WHEN 'ZUPN'. "Here ZUPN is the customer exit variable
    IF i_step = 1.
      <check for condition -- if successful, variable flag = 1, else variable flag = 0>
      IF flag = 0.
        MESSAGE e157(00). "Error Message
      ENDIF.
    ENDIF.
I have upgraded my system to BI 7.0 now. Whenever the variable check is not successful, it displays a blank screen instead of the error message in the report. Please advice if we need to change the code and how ??

Bhanu,
Thanks for u r reply.This warning message appears every time i execute the report through portal.
Any idea ?
Regards
Mano

Table look up using value from customer exit variable

I have a customer exit variable, CURRMON, which the user enters in the format MM/YYYY. From this entry, I would like to do the following to calculate and display the number of business days in the selected month:
Do the following to get Business Days in month.
Use the KF "FBA Day" (CTAFBAD) from the CTA_M01 infocube and write ABAP routine.
1. Based on user entry cal month get the last calendar day .
2. Do a master data look up (CTAFBAC is the master data object), using the last calendar day from step 1.
3. CTAFBAD is the attribute of CTAFBAC so move the value of CTAFBAD to the result, and display this result
Can anyone help me with this?

Hello,
You can use i step = 1 in SMOD transaction and write the code there.
l_s_range-low = sy-uname.
append ls_range to e_t_range.
regds,
Shashank

Passing multiple single values in Customer Exit Variables

Hi,
I have one requirement to Pass multiple single values in Customer Exit Variable.
If the user gives 2010 i need to get value previous fisacal year(2009),if its 2009, we need to get 2009.
Just requirement is like how to pass multiple single values?
Thanks.

Hi..
For this create a variable- Types of variable= Characteristics Value> Processing type as Customer Exit-->Reference Char as Fiscal year..
Try this code..
    when 'xxxx'.
      DATA: lv_zp0003_month(2) TYPE n,
              lv_zp0003_year(4) TYPE n.
      CLEAR: lv_zp0003_month, lv_zp0003_year.
      lv_zp0003_month = sy-datum+4(2).
      lv_zp0003_year = sy-datum(4).
If the month is January the year is set to previous year
      IF lv_zp0003_month = '01'.
        lv_zp0003_year = lv_zp0003_year - 1.
       l_s_range-low = lv_zp0003_year.
Else the year is set to actual
      ELSE.
        l_s_range-low = lv_zp0003_year.
      ENDIF.
      IF l_s_range-low = l_s_range-high.
        l_s_range-opt = 'EQ'.
      ELSEIF l_s_range-high IS INITIAL.
        l_s_range-opt = 'EQ'.
      ELSEIF l_s_range-low LT l_s_range-high.
        l_s_range-opt = 'BT'.
      ENDIF.
      l_s_range-sign = 'I'.
      APPEND l_s_range TO e_t_range.
Hope this helps.
Regards.
AKG

Problem with customer exit variable

HI i have created a customer exit variable to rread a table based in user input and pass it to my variable , every thing works fine but i get a waring message in my WAD saying
RANGE-LOW for customer exit variable ZVSO_PRM corrected to # BRAIN 746
Does any one have any idea why is it comming
my code is as follows
WHEN 'ZVSO_PRM'.
IF I_STEP = 2.
DATA: BEGIN OF ZPROD_MODEL OCCURS 0,
I_PROD LIKE ZCURR_PM_T-/BIC/ZPRODMOD,
END OF ZPROD_MODEL.
DATA: BEGIN OF ZREGIO_TABLE OCCURS 0,
REGION LIKE ZCURR_PM_T-/BIC/ZREGION,
END OF ZREGIO_TABLE.
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZREG02'.
CLEAR L_S_RANGE.
ZREGIO_TABLE = LOC_VAR_RANGE-LOW.
APPEND ZREGIO_TABLE.
ENDLOOP.
LOOP AT ZREGIO_TABLE.
SELECT /BIC/ZPRODMOD FROM ZCURR_PM_T INTO TABLE ZPROD_MODEL WHERE /BIC/ZREGION = ZREGIO_TABLE-REGION.
APPEND ZPROD_MODEL.
ENDLOOP.
SORT ZPROD_MODEL.
CLEAR L_S_RANGE.
LOOP AT ZPROD_MODEL.
L_S_RANGE-LOW = ZPROD_MODEL-I_PROD.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'EQ'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDLOOP.
ENDIF.

Could it be that the code doesn't find any value in ZCURR_PM_T table for the specified input region?

Customer exit variable output error

Hi gurus,
I have created one customer exit variable. in the selection screen i am giving multiple plant and material value,
my code is working for sigle plant and single material.
when i have taken multiple value. i am getting error message
error is 'No value determined for th variable"
When i debug my code in RSRT, it is giving all the values for different combination of plant and material. and those values are getting in the E_T_RANGE.
but out put it is giving the error.
my code is:
WHEN 'ZPRDEMVA'.
    IF i_step = 2.
      READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE
      WITH KEY VNAM = 'ZPRRNDT'.
      v_date = LOC_VAR_RANGE-LOW.
      v_year = v_date+0(4).
      v_month = v_date+4(2).
      v1_date = v_date+6(2).
      v3 = v_year - 1.
      v4 = v_month - 1.
      if v4 = 00.
      v4 = 12.
      v3 = v3 - 1.
      endif.
      concatenate v3 v4 v1_date into ddate.
      CALL FUNCTION 'DATE_GET_WEEK'
        EXPORTING
          DATE         = ddate
        IMPORTING
          WEEK         = zweek
        EXCEPTIONS
          DATE_INVALID = 1
          OTHERS       = 2.
      CALL FUNCTION 'WEEK_GET_FIRST_DAY'
        EXPORTING
          WEEK         = zweek
        IMPORTING
          DATE         = monday
        EXCEPTIONS
          WEEK_INVALID = 1
          OTHERS       = 2.
      sunday = monday + 6.
      v3_date = monday.
      v4_date = sunday.
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
              WHERE VNAM = 'ZPRPLNML'.
      CLEAR L_S_RANGE.
        v_werks          = LOC_VAR_RANGE-LOW.
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
              WHERE VNAM = 'ZPRMATML'.
      CLEAR L_S_RANGE.
        v_matnr          = LOC_VAR_RANGE-LOW.
      data: dummy_menge like i_mseg-menge value '0.01'.
      Do 52 times.
           select MATERIAL PLANT QUANT_B MOVETYPE
                 from /BIC/AWINO0100 into table i_mseg
                 where PSTNG_DATE between monday and sunday
                 and   MOVETYPE between 261 and 262
                 and   MATERIAL = v_matnr
                 and   PLANT = v_werks.
                     if sy-subrc NE 0.
                       i_mseg-menge = '0.01'.
                       i_mseg-matnr = v_matnr.
                       i_mseg-werks = v_werks.
                       i_mseg-bwart = '261'.
                       append i_mseg.
                     endif.
        loop at i_mseg.
          itab1-matnr = i_mseg-matnr.
          itab1-werks = i_mseg-werks.
          itab1-menge = itab1-menge + i_mseg-menge.
          itab1-bwart = i_mseg-bwart.
          COLLECT i_mseg into itab1.
        endloop.
        sort itab1 by matnr werks bwart.
        loop at itab1 where bwart = '261'.
          itab2-matnr = itab1-matnr.
          itab2-werks = itab1-werks.
          itab2-bwart = itab1-bwart.
          itab2-menge = itab1-menge.
          read table itab1 with key matnr = itab2-matnr
                                    werks = itab2-werks
                                    bwart = '262'.
          if sy-subrc = 0.
            itab2-menge = itab2-menge - itab1-menge.
          endif.
          append itab2.
        endloop.
        clear itab1[].
        refresh itab1.
        sunday = sunday + 7.
        monday = monday + 7.
      ENDDO.
      loop at itab2.
        sum1 = sum1 + itab2-menge.
      endloop.
      average = sum1 / 52.
      loop at itab2.
        sum2 = sum2 + ( ( itab2-menge - average ) * ( itab2-menge - average ) ).
      endloop.
      sum2 = sqrt( sum2 / 52 ).
      l_s_range-sign = 'I'.
      l_s_range-opt = 'EQ'.
      l_s_range-low = sum2.
      Append l_s_range to E_T_RANGE.
      clear itab2[].
      refresh itab2.
      sum1 = 0.
      sum2 = 0.
      monday = v3_date.
      sunday = v4_date.
      ENDLOOP.
      ENDLOOP.
    ENDIF.
Can any one please help me.
Thanks in advance.

Hi Alec,
i created a customer exit with the formula variable only. in the code i am getting the both quantity and unit fields. now i want to get quantity with unit in output.
thanks

Concatination of Two dates in customer exit Variable

HI Expert ,
I am writting customer Exit Variable to get Records from user entered Dates .
Eg. In Variable Screen of Bex report i have 2 Variable LYDate & TY Date both of them are As "Mutiple Single Value" & "Mendetory".
If we give LYDATE and TYDATE Date range as,
LYDate - 01/2013 - 06/2013
TYDate - 01/2014 - 12/2014
So I need ABAP Code which will get Value Range from 01/2013 from LYDATE and 12/2014 From TY DATE . So Query will Get data for 01/2013 TO 12/2014 (2 Years Data).
ZCALYEAR (Cusomer Exit) = LYDATE (01/2013) TO TY DATE(12/2104).
Please provide step by step ABAP Code to Achiev above issue. Points for Sure...
Thanks,
GB

Hi,
Some code like this will solve your issue:
CASE I_VNAM.
   WHEN 'NEWVARIABLE'.
   IF I_STEP = 2.
      READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE WITH KEY VNAM = 'LYDate'.
      If sy-subrc =0.
          CONCATENATE LOC_VAR_RANGE-LOW(4) INTO L_S_RANGE-LOW.
          READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE WITH KEY VNAM = 'TYDate'.
          If sy-subrc =0.
               CONCATENATE LOC_VAR_RANGE-HIGH(4) INTO L_S_RANGE-HIGH.
               L_S_RANGE-SIGN = 'I'.
               L_S_RANGE-OPT = 'EQ'.
          APPEND L_S_RANGE TO E_T_RANGE.
        endif.
      endif.
    endif.
endcase.
Regards
Yasemin...
Just realized that you need the year. Message was edited by: Yasemin ULUTURK

Passing messages from BW customer-exit variables to WebI

Similar Messages

Maybe you are looking for