Passing Multiple Parameters to Web Forms

I need to run a form through an URL (say by clicking on a link) and I need to pass more than one parameters to the called form , can anybody help me to know how to separate the two parameters , say p1 and p2 , in the URL address . I tried like this :
http:\\197.45.3.89./dev60cgi/ifcgi60.exe?form=login&userid=&otherparams=p2=ppx40001.fmx&p1=RMA&lookAndFeel=generic&colorScheme=teal
But the problem is with the syntax for separating the two parameters
&otherparams=p2=ppx40001.fmx&p1=RMA
does not work as I separate them with '&'.
What is the actual syntax ?
Thanks in advance folks .
Have a great new Year !!

Hey first of all turn your http:\\ to be http:\\ and the only thing I can think of is to use ? instead of &. I apologize in advance if this is totally useless :-)
Keith

Similar Messages

How to Pass Multiple Parameters To ReportReuest Method in Oracle BI 11g

Hi,
Am integrate Oracle BI Publisher 11g via Web Services in Oracle Forms,For that am developing code in PublicReportServiceClient Class. This worked properly with out passing parameter to the report. so how to pass parameters to the report . If Report is requried some Parameters to generate report.
If any one knows about How to Passing Multiple Parameters to ReportRequest Methos in Oracle 11g. Pls help me.
Am trying with the below code for PassParameters to ReportReuest Method in Oracle BI 11g. But by using this code am able to pass only one parameter to the Report, not for multiple Parameter Passing.
ArrayOfParamNameValue PnameValue=new ArrayOfParamNameValue();
ParamNameValue Namevalue=new ParamNameValue();
Namevalue.setName("P_SNO"):
ArrayOfString aos=new ArrayOfString();
aos.getItem().add("2");
Namevalue.setValues(aos);
PnameValue.getItem().add(Namevalue);
ReportRequest RepReq = new ReportRequest();
RepReq.setParmeterNameValues(PnameValue);
Following method callRunReport() with an array of parameters used in Oracle Bi 10g,To pass multiple report parameters to ReportRequest method.
public void callRunReport (String reportPath, String[] paramName, String[] paramValue, Stringusername, String password, String format, String template, String outFile)
try {
bip_webservice.proxy.PublicReportServiceClient myPort =new bip_webservice.proxy.PublicReportServiceClient();
// Calling runReport
ReportRequest repRequest = new ReportRequest();
repRequest.setReportAbsolutePath(reportPath);
repRequest.setAttributeTemplate(template);
repRequest.setAttributeFormat(format);
repRequest.setAttributeLocale(“en-US”);
repRequest.setSizeOfDataChunkDownload(-1);
if (paramName != null)
ParamNameValue[] paramNameValue = new ParamNameValue[paramName.length];
String[] values = null;
for (int i=0; i<paramName.length; i++)
paramNameValue[i] = new ParamNameValue();
paramNameValue.setName(paramName[i]);
values = new String[1];
values[0] = paramValue[i];
paramNameValue[i].setValues(values);
repRequest.setParameterNameValues(paramNameValue);

Ramani_vadakadu wrote:
window.open("http://hq-orapp-03.kuf.com:9704/xmlpserver/~weblogic/kufpec/BTA/KUF_CONF_ITINUD.xdo?_xpf=&_xpt=1&_xdo=%2F~weblogic%2Fkuf%2FBTA%2FKUF_CONF_ITINUD.xdo&_xmode=&_paramsP_BTM_ID="+parseInt(document.getElementById('P3_BTA_ID').value)+"&_xt=KUF_CONF_ITINUD&_xf=pdf&_xautorun=true&id=weblogic&passwd=kuf2011","_blank");
the above code we are using apex JS to BI publisher calling for report as PDF
i don't know exactly where your parameters , did you customize my link to multiple parameters
'http://192.168.0.57:8889/reports/rwservlet?userid=retail/1@xe&destype=cache&desformat=PDF&paramform=no&report=item_cost&P_BATCH_NO='+$v('P138_BATCH_NO');

Passing multiple parameters to attribute value

Hi All,
My requirement is, the notification message should get a link, by clicking the user should navigate to the form. I kept the attribute type as form and attribute value as INV_INVIDITM:ITEM_ID=41817 where inv_inviditim is the form function name and item_id is the parameter.
The problem is when passing multiple parameters. I am passing multiple parameters as INV_INVIDITM:ITEM_ID=41817&ORG_ID=204.
Can any one help me to solve the above problem?
Thanks is advance.
Srinivas

Try a different Database driver...

Passing multiple parameters to a portlet

Hi All,
I have created a portlet form a taskflow, and using the WSRP Producer connection I am adding this portlet into a new application's JSF page.
1. Is it possible to create a portlet that can accept multiple parameters?
2. is it possible to map a portlet method to a method in new app.
3. is there some implicit event that can be passed when all of the parameters are passed to the portlet.
What my requirement is:- I have to send some 4-5(String) parameters from the new application to the portlet application.
what would be the sequence in which the setters of this parameters would be called in the Portlet app?
can you please tell me if this is possible, and how to do it. Some tutorial would help.
Regards,
ND

Your question is WebCenter related and you should ask it in the forum {forum:id=354}.
Anyway, you can pass multiple parameters to a portlet. Define the parameters as parameters of the corresponding bounded TaskFlow. When the taskflow is wrapped as a portlet producer by the JSF Portlet Bridge all the taskflow parameters will be exposed as separate navigational portlet parameters. If you consume the portlet at some page, then the portlet parameters will be bound to PageDef variables and you can use these variables to pass parameter values to the portlet. If you have to re-send new parameter values at runtime, just set the corresponding pageDef variables and refresh the <adfp:portlet> tag by PPR. Do not forget to mark the portlet's region binding in the PageDef as RefreshIfNeeded, otherwise it will not get the new values and will not refresh.
Look at the following article in the documentation about using navigational parameter for contextually linking of portlets:
http://download.oracle.com/docs/cd/E14571_01/webcenter.1111/e10148/jpsdg_pages.htm#CHDJABHD
If you have additional questions, please ask them in the WebCenter forums.
Dimitar

How To Pass Multiple Parameters In URL with Report Builder

Hi,
I use apex 4.2 with database xe 11g and i use report builder to build my report i use this link to call report
function runrep(){
var vurl = 'http://192.168.0.57:8889/reports/rwservlet?userid=retail/1@xe&destype=cache&desformat=PDF&paramform=no&report=item_cost&P_BATCH_NO='+$v('P138_BATCH_NO');
popupURL(vurl);
now i want to pass Multiple Parameters like P138_ITEM_CODE , P138_UOM_CODE
how can i add this Parameters in URL ?
Regards
Ahmed

Ramani_vadakadu wrote:
window.open("http://hq-orapp-03.kuf.com:9704/xmlpserver/~weblogic/kufpec/BTA/KUF_CONF_ITINUD.xdo?_xpf=&_xpt=1&_xdo=%2F~weblogic%2Fkuf%2FBTA%2FKUF_CONF_ITINUD.xdo&_xmode=&_paramsP_BTM_ID="+parseInt(document.getElementById('P3_BTA_ID').value)+"&_xt=KUF_CONF_ITINUD&_xf=pdf&_xautorun=true&id=weblogic&passwd=kuf2011","_blank");
the above code we are using apex JS to BI publisher calling for report as PDF
i don't know exactly where your parameters , did you customize my link to multiple parameters
'http://192.168.0.57:8889/reports/rwservlet?userid=retail/1@xe&destype=cache&desformat=PDF&paramform=no&report=item_cost&P_BATCH_NO='+$v('P138_BATCH_NO');

Passing multiple parameters between two report portlets on the same page

Hi,
I want to pass multiple parameters between two report portlets on the same page.
I have been succussful passing a single parameter between two portlets. The
following are the steps :
(1) Created first report based on the query
SELECT htf.anchor('http://192.168.0.84:7778/servlet/page?&_pageid=97&_dad=portal30&_schema=portal30&_mode=3&dept_code='||DEPTNO,DEPTNO) Department, ename FROM EMP;
(2) Created 2nd report
select * from EMP where DEPTNO = :dept_code
(3) Added pl/sql code before display page on the 2nd report
portal30.wwv_name_value.replace_value(
l_arg_names, l_arg_values,
p_reference_path||'.dept_code',portal30.wwv_standard_util.string_to_table2(nvl(g
et_value('dept_code'),10)));
(4) Created a page and added these reports as portlets.
Sofar it works fine for one parameter (deptno) . Now I want to add one more
parameter say empno to my first report query and would like to pass both the
parameters deptno and empno to the 2nd report. Please tell me how to pass multiple parameters ?
Thanks
Asim

Hi,
You will have to do the same thing
The select will be like this
SELECT htf.anchor('http://toolsweb.us.oracle.com:2000/servlet/page?_pageid=97&_dad=mb&_schema=mybugs&_mode=3&dept_code='||DEPTNO||'&empno='||empno,DEPTNO) Department,ename
FROM EMP
In the additional plsql code do the same for empno like this
mybugs.wwv_name_value.replace_value(l_arg_names,l_arg_values, p_reference_path||'.dept_code',mybugs.wwv_standard_util.string_to_table2(nvl(get_value('dept_code'),10)));
mybugs.wwv_name_value.replace_value(l_arg_names,l_arg_values, p_reference_path||'.empno',mybugs.wwv_standard_util.string_to_table2(get_value('empno')));
Thanks,
Sharmila

Probs sharing a report that uses SETPARAM to pass multiple parameters

Ok we have master DB account Disco that creates reports. I also have oracle acct Duser for the users to run the reports.
Per Metalink Note:304192.1, we've got the setparam stuff working to pass in date parameters into our sheet. This works fine when I run the report as Disco. When I try to share the report to Duser, it still prompts for the dates, but then the report returns all 0's for the results. I have no idea why this is happening.
Any suggestions on how to share reports with other users that pass in parameters would be much appreciated. thanks!!
Allen

Hi Allen,
I would always recommend that you use sys_context to pass parameters. You can search this site for sys_context or take a look at (Re: Passing multiple parameters into Custom Folder... for more details.
Rod West

Passing multiple parameters to an Oracle procedure

I'm having trouble passing multiple parameters to a stored procedure in Crystal Reports 2008 (12.2.0.290).
I'm using an OLE DB (ADO) connection to an Oracle 10g database.
I have created a stored procedure that has 3 parameters (in out sys_refcursor, in varchar2, in varchar2) and conforms to all of Crystal Reports' requirements for stored procedures.
When I select my stored procedure in the Database Expert, it prompts me to enter values for both varchar2 parameters. I enter values and everything seems fine. I close the Database Expert.
Now the stored procedure is listed in the Field Explorer, but I cannot expand the list of fields. There is a plus sign next to the stored procedure, but clicking on it does nothing. I do not get any error messages.
If I remove one of the parameters from the stored procedure and try again, everything works fine. I've also tried using a variety of parameter types, but this problem occurs every time there are 2 or more parameters (3 including the ref cursor).
Please help.

Try a different Database driver...

How to pass multiple parameters by URL?

hi i am having trouble passing multiple parameters by URL.
i tried the following codes but still not successful in using request.getParameter
<a href="remove.jsp?imageid=<%=imageId%>&userid=<%=user%>">remove</a>
<a href="remove.jsp?imageid=<%=imageId%>&userid=<%=user%>">remove</a>

Looks good to me.
What parameters are you getting at the other end?
imageid and userid? (case is important)
What does the address url in the browser show?
What code are you using to retrieve the parameters?

Passing multiple parameters (caption and textbox) to another form failing to pick up Caption

I have an Microsoft Access application that is more like a form than a database. Users complete the form and then submit it to us for review. There are many questions and memo fields on the different forms (sections). Some of the memo forms are small due
to the limitation of the size of the form (22 inches) therefore there is a lot of scrolling. I want to include a button on each question so that when users click on it will display a form where I pass the label caption (question) and the answer to this form.
Alternatively I can have a expanded form for each question but that would require over 50 forms. The Application is quite large. I wanted to have one form and just call the different questions/answers.
The below is working for the text box (AnswerTxt). However the CaptionTxt is not holding it's value when it gets to the new form. It's only displaying the name of the variable name, CaptionTxt
On the form where the data resides I have:
Private Sub test_Click()
Dim CaptionTxt As String
Dim AnswerTxt As String
CaptionTxt = Me.lblSect11_5.Caption
AnswerTxt = Me.Section11_5.Value
Debug.Print CaptionTxt
Debug.Print AnswerTxt
DoCmd.OpenForm "Form1", OpenArgs:="CaptionTxt|" & AnswerTxt
End Sub
On the new form with an expanded memo field
Private Sub Form_Load()
Dim intPos As Integer
Dim strControlName As String
Dim strValue As String
If Len(Me.OpenArgs) > 0 Then
' Position of the pipe
intPos = InStr(Me.OpenArgs, "|")
If intPos > 0 Then
strControlName = Left$(Me.OpenArgs, intPos - 1)
Debug.Print strControlName
strValue = Mid$(Me.OpenArgs, intPos + 1)
Debug.Print strValue
' Retrieve Control Name from the first part of the string
Me.lblText11.Caption = Left$(Me.OpenArgs, intPos - 1)
' strControlName = Left$(Me.OpenArgs, intPos - 1)
' Retrieve Value to Assign from the end of the string
Me.txt_Section11.Value = Mid$(Me.OpenArgs, intPos + 1)
' strValue = Mid$(Me.OpenArgs, intPos + 1)
' Assign the value to the control
' Me(strControlName) = strValue
End If
End If
End Sub
jim neal

The below is working for the text box (AnswerTxt). However the CaptionTxt is not holding it's value when it gets to the new form. It's only displaying the name of the variable name, CaptionTxt
It will, because you are passing it as a literal string with:
DoCmd.OpenForm "Form1", OpenArgs:="CaptionTxt|" & AnswerTxt
In this "CaptionTxt|" is a literal string, whereas AnswerTxt references the variable. It should be:
DoCmd.OpenForm "Form1", OpenArgs:=CaptionTxt & "|" & AnswerTxt
You might be interested in the file Args.zip in my public databases folder at:
https://onedrive.live.com/?cid=44CC60D7FEA42912&id=44CC60D7FEA42912!169
If you have difficulty opening the link copy its text (NB, not the link location) and paste it into your browser's address bar.
This little demo file illustrates how to pass multiple arguments, using a module originally developed by Stuart McCall and later expanded by me to allow the passing of named arguments.
Ken Sheridan, Stafford, England

Pass Checkbox Parameters from HTML Form to a stored procedure

I'm still looking for a solution to my forms problem. FYI, I'm not using Applications Express to build my application--I'm using straight PL/SQL. I need to know how to pass checkbox parameters from my Web form. I'm allowing folks to select one or more checkboxes on a form that will call a delete function to delete the selected records. What I read in Oracle's "Database Application Developer's Guide - Fundamentals" isn't helpful to me. If someone would point me to some examples, maybe I could see what I'm doing wrong. Here's what was written in "Database Application Developer's Guide - Fundamentals":
All the checkboxes with the same NAME attribute make up a checkbox group. If none of the checkboxes in a group is checked, the stored procedure receives a null value for the corresponding parameter.
If one checkbox in a group is checked, the stored procedure receives a single VARCHAR2 parameter.
If more than one checkbox in a group is checked, the stored procedure receives a parameter with the PL/SQL type TABLE OF VARCHAR2. You must declare a type like this, or use a predefined one like OWA_UTIL.IDENT_ARR. To retrieve the values, use a loop:
CREATE OR REPLACE PROCEDURE handle_checkboxes ( checkboxes owa_util.ident_arr )
AS
BEGIN
FOR i IN 1..checkboxes.count
LOOP
htp.print('<p>Checkbox value: ' || checkboxes(i));
END LOOP;
END;
SHOW ERRORS;

I'm not sure I understand what your issue is.
If your web form has the following checkboxes defined all with the same name:
<input type="checkbox" name="attrib" value="1">one</input>
<input type="checkbox" name="attrib" value="2">two</input>
<input type="checkbox" name="attrib" value="3">three</input>Then you would create and register a procedure to handle the form submission that has a parameter with the name attrib of type owa_util.ident_arr e.g.:
create or replace procedure handle_form(attrib owa_util.ident_arr) as
iter number;
begin
for iter in attrib.first .. attrib.last loop
    -- do something with attrib(iter)
end loop;
end;
/Now the one problem with this handler (or any form handler for that matter) is that if the user selects none of the check boxes, or no value for any of the expected parameters, the handler would be called with some parameters missing or with out any parameters passed to it, and the call will error out.
To get around that you need to provide default values for all the parameters passed to your handler including the ident_arr parameters, however with ident_arr parameters that's difficult to do with standalone procedures. If you place your procedure in a package you can define package level variables of the appropriate types that can be used as default values:
create or replace package my_web as
empty_arr owa_util.ident_arr;
procedure handle_form(attrib owa_util.ident_arr := empty_arr);
end my_web;
create or replace package body my_web as
procedure handle_form(attrib owa_util.ident_arr := empty_arr) as
    iter number;
begin
    for iter in attrib.first .. attrib.last loop
      -- do something with attrib(iter)
    end loop;
end;
end my_web;
/now when you hit the situation where the user doesn't select any check boxes, the call to handle_form won't err out due to missing parameters, and the empty_arr won't have any elements to iterate over so the loop in the procedure body will be fine and you will be able to retrieve each selected check box value from the attrib array when you iterate over it.

How to pass multiple items in Adobe forms to a Webservice

Hello, all.
I'm trying to create Interactive Form to create a sales order in R/3.
Please somebody tell me how to pass the multiple line item data to the Webservice.
For example, the Webservice I'm using was generated from BAPI_SALESORDER_CREATEFORMDAT2.
The BAPI has tables for item data in sales order.
However, when I create the form with table for item data, the only last line of the table is passed to the Webservice.
How can I create Adobe forms to pass multiple line item to the Webservice.

Hi,
I have worked on the same application for the creation sales order and has used the same BAPI.
You should first extract the data from the table node through the method "get_static_attributes_table" and take all the result into a table of type same as element of that particular node.
Now pass the data from this table into the internal table of type as mentioned in the BAPI using work area.
And pass this table to BAPI.
This will work .
Regards,
Shruti

Passing application parameters to 9i forms

We recently converted our Forms 6 forms to 9i, on Solaris. We recompiled them on AIX and got them running, except that I have trouble figuring out how to pass application parameters. We passed the parameters on the run-form command line in our olf forms.
In 9i, I tried passing the parameter through the URL; I also tried assigning the the parameter values in formsweb.cfg. Does baseHTML need to be involved in this?
Also Oracle does not certify that forms 9i for AIX. Does anyone know of any problem running on AIX.

Clayton,
do you mean custom parameters when saying application parameters?
if you application contains custom parameters that are passed when starting the Forms, then this can be added using the otherparams parameter.
E.g.
otherparams=usesdi=yes myparam1=foo myparam2=foo2
The other params parameter can be set in the formsweb.cfg file (forms90/server) globally for all applications or individual for a single application. If you need to pass custom parameters in the URL then it could be done more nicely if you specify the following in the formsweb.cfg file
otherparams=usesdi=%usesdi% myparam1=%myparam1% myparam2=%myparam2%
In the request URL you would request the application by
.../forms90/f90servlet?config=myApp&usesdi=yes&myparam1=12&myparam2=hello
"myApp" would be a named configuration in the formsweb.cfg file like:
[myApp]
form=myEmp
userid=scott/tiger@orcl
lookandfeel=oracle
otherparams=usesdi=%usesdi% myparam1=%myparam1% myparam2=%myparam2%
You don't need to change the baseHTML file for this. The Forms system commands are pre-defined in formsweb.cfg and don't need to be added to the URL
Haven't heard about Forms not running on AIX, so I cannot help you with this question
Fran

Passing multiple parameters in sql query

Hi All,
This may not be the correct place to post this.
How to pass multiple paramters to a variable in sql developer.
Ex: Select * from Country where state= :statename (Country is table name, state is column name)
If I execute the above query in SQL Developer I can pass only one parameter at a time for :statename ie either KERALA,KARNATAKA,PUNJAB etc.
How can I pass multiple values (all KERALA,KARNATAKA,PUNJAB) or ALL column values at a time in SQL Developer.
Thanks

user1668671 wrote:
How to pass multiple paramters to a variable in sql developer.A scalar variable by definition cannot store more than one value at a time.
Array type variables can, as this example using the built in type odcivarchar2list shows
SQL> select
2      object_name,
3      object_type
4 from
5      all_objects o
6 where
7      o.object_name in
8      (select column_value from
9      table(sys.odcivarchar2list('DUAL','ALL_OBJECTS')));
OBJECT_NAME                    OBJECT_TYPE
DUAL                           TABLE
DUAL                           SYNONYM
ALL_OBJECTS                    VIEW
ALL_OBJECTS                    SYNONYM
ALL_OBJECTS                    VIEWHere is a full discussion with multiple solutions for various versions including a string parsing
http://tkyte.blogspot.com/2006/06/varying-in-lists.html
Does SQL Developer support array type variable? I don't know they may know here {forum:id=260}
Otherwise the link above shows how to parse a single character variable into multiple values that will be needed.

Flash Islands : pass event parameters to Web Dynpro

Hi,
I am trying to pass a parameter to Web Dynpro using "FlashIsland.fireEvent()". The event is fired, but I cannot get the parameter.
I WD I created a GACEvent :
name = doSomething
onAction = doSomethingAction
In this Event I created a GACEventParameter
name = returnText
type = string
In Flex I implemented following function :
private function click():void
   var returnText:String;
   returnText = "Dit is een test";
   FlashIsland.fireEvent(this,'doSomething',returnText);
This is the code of the action in WD :
public void onActionDoSomethingAction(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent)
    //@@begin onActionDoSomethingAction(ServerEvent)
       wdComponentAPI.getMessageManager().reportSuccess(wdEvent.getString("returnText"));
    //@@end
The event is fired, but I get the message "invalid message: null". What am I doing wrong?
Regards,
Jeroen

Hi,
Wrong syntax when you fire the event. The correct syntax is :
flex code :
var myParam:String = new String();
var myValue:String = "Test";
FlashIsland.fireEvent(this,"Event1",);
Regards,
Jonas

Passing Multiple Parameters to Web Forms

Similar Messages

Maybe you are looking for