Passing on 4.0.2 upgrade???

I puchased 2 iPhone 4's two weeks ago with my wife and I have been following as many threads as possible to educate myself on what is working, works well, and what is not working well.
It would be an understatement to say that there have been more than a few comments on hiccups associated with the 4.0.2 upgrade that iTunes is suggesting whenever I sync.
I'm seriously considering just holding out till the next release rather than risking the hiccups I have been reading about.
Can I do that, or do I have to do each upgrade in sequence?
I know that I can return it if there is a problem, but I am not interested in a refurb'd replacement if I can avoid it.
Opinions???

Do whatever you like, but there has not been one single upgrade - since the very first upgrade three years ago - that has not had about the same response on these forums.
Most people never have an issue, have never heard of these forums, and have no idea that the updates aren't working for everyone.
It probably matter little if you upgrade or not, but if you are waiting for an update to come without the resulting complaints, then it will never happen.

Similar Messages

Ethernet not able pass traffic after Mountain Lion upgrade.

I used the ethernet on my display to download Mountain Lion. Ran the install, rebooted, now nothing. Wifi works fine from my connected MBP15. The display adapter shows connected, but doesn't get a DHCP IP. If I set one manually, it doesn't pass traffic. Any updates I've missed? What else could it be?

Hi
Thanks for your replies. It isn't a gmail account - it's a domain account hosted by Domainmonster. Also my iCloud email is now intermittent :(
I've checked the SSL settings/authentication settings and everything is as it should be according to the email provider. It's frustrating as it was working fine for exactly a week following the upgrade and then just stopped sending mail. Also, the intermittent nature of the problem on the iCloud account now suggests to me at least that this is a problem that isn't the users fault?
I've downloaded thunderbird and all my accounts are working perfectly through that so for the time being at least I'm staying with the upgrade and hoping that a future apple update might address the issue. From the reading around I've done this seems to be a problem some people are having that tends to be intermittent in nature and resolved temporarily but not completely at the users end of things.
I've given up for now thanks to the fact that Thunderbird is working and I can still access my accounts on my iPhone. Very frustrating though when things don't make sense :) I mean, if it was going to stop working I would expect it to have stopped when I upgraded - not functioned fine for a while afterwards and then just literally send a mail one minute and refuse to send the next five minutes later. Also with my new problem today of Mail and my .me account - randomly sending mail when it feels like it and stacking mails up in the outbox the next - just doesn't make sense to me :)
If anyone does figure out what's going on I'd be grateful for any ideas/suggestions. Seems weird that all the email accounts function fine through thunderbird but not Mail. So far anyway :)

My iphone 5 will not let me put in my pass code following ios 7 upgrade. What can I do to restore

Have just downloaded ios7 onto my iphone 5. Now it will not let me put in my pass code. Message reads iphone is disabled. What action can I take ?

I did the same thing and my phone has been frozen for the past half hour. I am ****** as something so simple has now totally screwed up my phone. I have powered it off, plugged it into itunes to restore, and nothing works.
It keeps asking me to connect and restore via itunes which starts a process of updating or restoring and continues like it's ground hog's day. NEVER ENDING but NEVER fixed.

Simple pass doesn't work after upgrading to Windows 10

Hi all I just upgraded to Window's 10 (took 3 hours, works). However HP Simplepass now doesn't work. Anyone else with this problem? Brian

Hi I fixed this issue using "Run programs made for previous versions of Windows" . BrianH15

My Epson Stylus Office TX525FW scanner does not works, does any one have information about how much time may pass before Epson provides the upgrade drivers for it?

A couple of days ago, I updated my MacBook Pro to OS X Mavericks and unfortunately my epson mutifunctional in the scanner part does not function any more
I have visited several times a day the support page for Maveriks inside Epson site and there is not such a driver to solve this problem
As some members says, I got out Windows machines precisely for things like that and OHH this OS has the same problems

This isn't Apple's fault. Epson makes the driver. It's not like Mavericks hasn't been out in beta for months. They had plenty of time to do it, but they didn't. Shows you how much contempt Epson has for their customers.
You might have some success deleting whatever Epson scanner driver and scanning apps you have, and then try Image Capture (it's in Applications), and seeing if it will download a driver for your scanner.

Upgraded to ios .7.4 and now i have a unknown pass code

I upgraded to ios 7.4. I have never used a pass code . After the upgrade, it nows says slide to unlock to enter pass code. I never put one on. How do i remove this pass code. I haven't synced with itunes, i just downloaded a few apps. I am using ipad 4
Please help.
Walter

Try one of these methods if you haven't gotten it to work yet.
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

Wlc 5508 ios upgrade in ha mode

I am having 2 wlc 5508 in HA mode, and want to upgrade ios from 7.5 to 7.6
Current IOS file status in primary and secondary.
Primary WLC IOS : AIR-CT5500-K9-7-5-102-0.aes
Standby WLC IOS : AIR-CT5500-LDPE-K9-7-5-102-0.aes
HA WLC ios upgrade procedure is when we upgrade ios in primary wlc it will push to standby wlc and if earlier ios version match it will accept it.
ISSUE : If you check in wlc status detail I have given upper both has same ios version but IOS file are different and currently in HA mode and working.
Now I am trying to upgrade IOS it is not allow me to upgrade it.
Giving below error :
TFTP receive complete... extracting components.
Checking Version Built.
Image version check passed.
Informing the standby to start the transfer download process
Waiting for the Transfer & Validation result from Standby.
Standby - Standby receive complete... extracting components.
Standby - Checking Version Built.
Standby - Image version check passed.
Standby - Transfer failure : Upgrade from non LDPE to LDPE software is not allowed.
Please download AIR-CT5500-K9-x-x-x-x.aes image instead.
Transfer & Validation on Standby failed.
Transfer download failed both on Active & Standby, Please retry download
(Cisco Controller) >
Please suggest how I can upgrade IOS in HA mode.

Primary WLC IOS : AIR-CT5500-K9-7-5-102-0.aes
Standby WLC IOS : AIR-CT5500-LDPE-K9-7-5-102-0.aes
This won't work and you'll see from the error message. Your standby WLC has a particular firmware loaded with LDPE enabled. So first, you need to answer if you need LDPE or not.
Both firmwares has to match, including LDPE. If you need LDPE, the your primary has to be loaded with LDPE before you can proceed. If you don't need LDPE, then you need to downgrade the secondary to non-LDPE version before you can proceed.

Photo library upgrade on ipad

My ipad won't pass the screen that says upgrading your photo library.

Then make a backup of you iPad (just in case) and reinstall iPhoto.
Reinstall an app
Remove the app from your device and reinstall it:
Tap and hold any app icon on the Home Screen until the icons start to wiggle and show a small "x" in the top-left corner of the app.
Tap the "x" in the corner of the app you want to delete.
Tap Delete to remove the app and all of its data from your device.
Press the Home button.
Go to the App Store.
Search for the app and download it again.

Special Character Error in Message in PI after PI-PRD Upgrade

Dear Experts,
We had a PI PRD upgrade 3 days back from (PI NW 7.3 ) from SP-07 to SP-11.
After this upgrade we ar facing one peculiar issue which was not there before upgrade.
The messages containing special character like '&', ", etc is not getting parsed and throwing error.
The messages having no such characters are passing smoothly.
Is it upgrade related issue??
Thanks
Sumit

Hi Sumit,
There is not a problem to introduce a java mapping in a response of a ECC system, at least if you are not using a standard PI software component. You can set in the response Operation Mapping, two mappings, the first one the java mapping and the second one your current mapping.
Java Mapping example: Java Mapping: To change the encoding type or replacing special characters.
Regards.

Upgrading from Tiger Server (10.4) to Lion?

I have an Apple Xserve (Dual 2.66 GHz Xeon proccessors, currently running Tiger Server, 10.4) I'm hoping to upgrade to Lion. The server is used at a non-profit community center so we've had to pass on the last few upgrades (Leopard, Snow Leopard) given the price tags (~$500), but since Lion server was announced at only $50, I've been thinking about trying to upgrade it. From what I've read, this $50 copy is good for a full, clean install, and not just an upgrade-only version. Is that true?
So here's the real question; Can I upgrade straight from server 10.4 to server 10.7?
According to the Step 1 here (http://www.apple.com/macosx/server/how-to-buy/), I first need to upgrade to the latest version of Snow Leopard, but no way will I pay $500 for it. What are my options?
What happens if I install a standard (non-server) version of Snow Leopard on the server, then try to upgrade from there? Will I lose all server functionality? My assumption would be that this would result in upgrading most of my non-server applications, while leaving me with the 10.4 versions of all the server/administrator applications. Is this at all correct? Or do I lose all server functionality by using a standard user disc?
Any responses would be greatly appreciated. We're looking at spending several thousand dollars on an entirely new server, but if we can salvage this one for $50, it would be a no-brainer. Thanks!

Hello, bambe009, and welcome to the forums,
Because it hasn't actually shipped yet any answers here are speculation and nothing is actually known for certain.
That being said it does appear that the only means of distribution will be via the App Store (with some 'sort of' exemptions for large institutional and educational buyers) so some form of Leopard appears it will be necessary.
It may be possible that your client Leopard to Lion Server may very well work (there's nothing to stop you from installing client Leopard on the Xserve) but the obvious downside of this is that you will need to recreate all your services and accounts etc from scratch in Lion. There is a upgrade/migration path for going from 10.4 to either 10.5 or 10.6 that updates your old services and accounts from one server set-up to the new one. I speculate that Lion will have a similar system to move from Snow Leopard Server to Lion Server and assuming it does you would lose this moving from the client version to server.
In addition it seems that the Lion Server "add-on" is essentially $50 upgrade to the product itself making the total cost more like $80 total, but still distinctly less than before.
Again - this is several layers of speculation about a product that does not exist yet so several large grains of salt should be taken with this.
My $.02,
=Tod

New Build with Operating System upgrade from ME to XP

I am going to inbark on my first system build. THe MSI K8N Neo4 Platinium is highly recommended. I am not going to do a complete rebuild. I am just going to keep my newest hardward from my old system. My old processer a P3 933mhz along with moboard is at the core of my upgrade. I noticed on the K8N page that the board does not support ME. My old system (Gateway) shipped with ME for which I purchased the XP upgrade. I understand that the XP upgrade disk has the full operating system on it and all I have to do is put the ME disk in when the XP disk asks for previous operating system. Will this board be able to recognize the ME disk so that it will pass muster with the XP upgrade disk?

Quote from: Edddd on 02-July-05, 21:15:37
Thank you both for the prompt reply, what are your thoughts about the K8N Neo4 Platinium mobo? Is it as good as Tom's Hardware says it is? I am planning on intalling an AMD Athlon 64 3700 San Diego on it. I am not a real power gamer. I just want something that will antincipate the future. My current rig, P3 933mhz has lasted me for 5 years. Thanks
The MSI K8N NEO 4 Platinum is a very stable board, has a good range of features, is highly overclockable and is just great. I think mine is great so far and I suggest you buy a decent power supply with 22A - 24A minimum on the +12V rail to make sure it lasts and worls 100% correctly.
If you need any more help just ask!

HT1620 How do I obtain my apple pass code to download update?

Where do I set my pass code for updates

The iOS upgrade is seeking whatever code you use to unlock your iPhone or iPad device; your device passcode or PIN or password you're using to secure your device.
This to avoid somebody random poking buttons and unexpectedly upgrading your temporarily-unlocked device.
If you've forgotten the PIN or password that you had originally configured to unlock your phone, there is a reset sequence.

Itunes store wont open and let me download music

my itunes store wont open it says im not connected to the internet which is false for im on it now typing this
hELP

If a solution is found I hope someone posts it soon. I have followed everything iTunes has asked for: new account, new pass, new info, and finally upgrade to iTunes 10. After attempting to Download 10. I was told that my iBook did not meet the system specs. I had looked earlier and found no sys specs, so I presumed it would download. I was wrong. After going through all of that I still cannot access the store. I had none of this problem a mere 2 weeks ago. So somebody please post a reasonable solution.
thanks,
Pb

APEX 3.1.0.00.32 doesn't work with ORACLE 10g SE 10.2.0.1.0

I have Oracle 10g Express Edition 10.2.0.1.0 under Windows XP SP2 on my Personal Computer. There is installed the too , which is working fine.
Also I have Oracle 10g Standard Edition 10.2.0.1.0 (after installing Oracle 10g BI SE One) under Windows 2000 Adv. Server (On remote Server named URAN).
I tried to install the APEX 3.1.0.00.32 on URAN Server.
I made all points from the list in the Oracle Database Application Express Installation Guide Release 3.1 E10496-02 (the same steps on my Personal Computer where APEX 3.1.0.00.32 is working fine).
But!!!
When I’m starting APEX 3.1.0.00.32 (on the Server - http://URAN:8080/apex/apex_admin) then I get errror:
Unauthorized
after 3 time entering the correct user & password ( from URAN accounts list ) in XDB user window.
QUESTION 1: Why version number of Database on my PC & on Server is same, but
APEX 3.1.0.00.32 on my PC is working fine while its is not working on the Server?
I found out in Internet the APEX 3.1.0.00.32 is working correctly on ORACLE SE from version 10.2.0.3. But ! I have Oracle 10g Express Edition VERSION ‘s 10.2.0.1.0 and the APEX 3.1.0.00.32 is working fine there. What ?! Oracle 10g XE 10.2.0.1.0 & Oracle 10g SE 10.2.0.1.0 have different the data dictionary?
QUESTION 2: In Oracle® Database Application Express Installation Guide
Release 3.1 E10496-02 , in section
4.3 About Configuring the Embedded PL/SQL Gateway
said
Note:
The Oracle XML DB HTTP Server with the embedded PL/SQL gateway is not supported prior to Oracle Database 11g.
But! My Oracle 10g Express Edition has version is 10.2.0.1.0 (less than 11g) AND …
And APEX 3.1.0.00.32 is working fine by using XML DB HTTP Server nevertheless!
By starting - http://127.0.0.1:8080/apex/apex_admin
SUMMARY: Could I launch APEX 3.1.0.00.32 on the Server ( after any magic pass )?
OR I need upgrade my Oracle 10g Standard Edition 10.2.0.1.0 to version 10.2.0.3.0 (what very difficultly and idly for me)?

Firstly, XE 10.2.0.1 isn't the same as 10gR2 10.2.0.1
It was released a bit later and had some fixes that were in later 10.2.0.x patchsets (and also had some different security settings). Maybe they should have gone with 10.2.1.1.
Second, the embedded PL/SQL gateway was okay for XE, but isn't supported for Apex on the Standard/Enterprise Edition until 11g. It doesn't mean it never works, but it does mean that you shouldn't rely on it.
That said, there are other issues with 10.2.0.1 so I'd recommend going for the latest patchset anyway.
Thirdly, if you get the XDB login dialog box, something has gone wrong. For the embedded PL/SQL gateway, XDB is acting as a virtual webserver. Generally what should happen is you connect to the webserver (XDB) and request a page (the APEX login page) and XDB should give it to you, no questions asked.
If it asks you to login then the XDB webserver is running but is trying to get authorisation before it gives you the page. [By the way, if it does prompt for a username/password, it is expecting a database username/password, not an apex one or an O/S one] I'd suspect something is wrong with the setup.
What happens if you ask for a simple image like
http://URAN:8080/i/bottom_left.gif

APEX 3.1.0.00.32 doesn't work with ORACLE 10g SE 10.2.0.1.0 (altered)

I have Oracle 10g Express Edition 10.2.0.1.0 under Windows XP SP2 on my Personal Computer. There is installed the APEX 3.1.0.00.32 too , which is working fine.
Also I have Oracle 10g Standard Edition 10.2.0.1.0 (after installing Oracle 10g BI SE One) under Windows 2000 Adv. Server (On remote Server named URAN).
I tried to install the APEX 3.1.0.00.32 on URAN Server.
I made all points from the list in the Oracle Database Application Express Installation Guide Release 3.1 E10496-02 (the same steps on my Personal Computer where APEX 3.1.0.00.32 is working fine).
But!!!
When I’m starting APEX 3.1.0.00.32 (on the Server - http://URAN:8080/apex/apex_admin) then I get errror:
Unauthorized
after 3 time entering the correct user & password ( from URAN accounts list ) in XDB user window.
QUESTION 1: Why version number of Database on my PC & on Server is same, but
APEX 3.1.0.00.32 on my PC is working fine while its is not working on the Server?
I found out in Internet the APEX 3.1.0.00.32 is working correctly on ORACLE SE from version 10.2.0.3. But ! I have Oracle 10g Express Edition VERSION ‘s 10.2.0.1.0 and the APEX 3.1.0.00.32 is working fine there. What ?! Oracle 10g XE 10.2.0.1.0 & Oracle 10g SE 10.2.0.1.0 have different the data dictionary?
QUESTION 2: In Oracle® Database Application Express Installation Guide
Release 3.1 E10496-02 , in section
4.3 About Configuring the Embedded PL/SQL Gateway
said
Note:
The Oracle XML DB HTTP Server with the embedded PL/SQL gateway is not supported prior to Oracle Database 11g.
But! My Oracle 10g Express Edition has version is 10.2.0.1.0 (less than 11g) AND …
And APEX 3.1.0.00.32 is working fine by using XML DB HTTP Server nevertheless!
By starting - http://127.0.0.1:8080/apex/apex_admin
SUMMARY: Could I launch APEX 3.1.0.00.32 on the Server ( after any magic pass )?
OR I need upgrade my Oracle 10g Standard Edition 10.2.0.1.0 to version 10.2.0.3.0 (what very difficultly and idly for me)?

Firstly, XE 10.2.0.1 isn't the same as 10gR2 10.2.0.1
It was released a bit later and had some fixes that were in later 10.2.0.x patchsets (and also had some different security settings). Maybe they should have gone with 10.2.1.1.
Second, the embedded PL/SQL gateway was okay for XE, but isn't supported for Apex on the Standard/Enterprise Edition until 11g. It doesn't mean it never works, but it does mean that you shouldn't rely on it.
That said, there are other issues with 10.2.0.1 so I'd recommend going for the latest patchset anyway.
Thirdly, if you get the XDB login dialog box, something has gone wrong. For the embedded PL/SQL gateway, XDB is acting as a virtual webserver. Generally what should happen is you connect to the webserver (XDB) and request a page (the APEX login page) and XDB should give it to you, no questions asked.
If it asks you to login then the XDB webserver is running but is trying to get authorisation before it gives you the page. [By the way, if it does prompt for a username/password, it is expecting a database username/password, not an apex one or an O/S one] I'd suspect something is wrong with the setup.
What happens if you ask for a simple image like
http://URAN:8080/i/bottom_left.gif

Passing on 4.0.2 upgrade???

Similar Messages

Maybe you are looking for