Passing page_url using hyperlink

Hi,
I would like to pass the page_url of the show_edit_mode to other procedures that I am calling using hyperlink(anchor tag).
This works fine if I am using hidden variables & submitting the page. But if I am passing it as an argument of the hyperlink, I am getting
'Internal Server Error'.
Once the '?' and '&' arguments in the page_url passed parameter is removed, there is no error.
Any idea on how I can pass page_url across procedures using Hyperlinks..
Any idea is welcome..
Thanks in advance..
Sajith

Sajith,
you need to encode the URL by using the utl_url package that provides public APIs for both encoding and decoding purposes.

Similar Messages

Use hyperlink to open another page , and pass some parameters to that page

Hi
Thank you for reading my post.
How i can use hyperlink to open another jsp file in a new window meanwhile pass some parameters to it.
for example i need something like this :
http://127.0.0.1:8080/myProj/faces/Viewmessage.jsp?messageID=10
i can not use session bean because i must open that in a new window and use hyperlink not Action
Thank you

I tried the following in the equivalent of your Viewmessage (page bean):
        ExternalContext eContext = FacesContext.getCurrentInstance().getExternalContext();
        String text = "Parameters: ";
        Iterator it = eContext.getRequestParameterNames();
        Map requestParams = eContext.getRequestParameterMap();
        while (it.hasNext()) {
            String key = (String)it.next();
            String value = (String)requestParams.get(key);
            text += "; " + key + " = " + value;
        staticText1.setText(text);That works as expected when you reach that new page via a hyper link.
The session object is also the same as in your `old' window. So be careful about synchronization!
I hope this helps.
-- Marco

Use HyperLink(mailto:...) to open a file?

A question was posted previously about linking to an image file. The HYPERLINK function allows this if the image is on a web server and can be accessed via http:// but you can't use HYPERLINK to access a local file on your computer (or at least I can't seem to). The HYPERLINK function will also take a mailto: command and will open up your mail client with the address, subject, and message of your desire. I was wondering if it could also use the "attachment=..." part of the mailto command to attach a file to the email. Thus you could bring up a local image in your email client. I failed at getting it to work but I may have been formatting the command wrong. Anyone have experience with the proper formatting or anyone know if this is not a supported functionality?

As System Events returns an URL when we ask it for a file's properties, I tried to use this URL with no results but the files where on a single machine.
Maybe it behaves differently on a network.
To get the URL I uses this script:
set thefile to "Western 4:photos ???:PA030012.JPG"
tell application "System Events" to get URL of disk item thefile
the result is something like:
"file://localhost/Volumes/Western%204/photos%20%3F%3F%3F/PA030012.JPG"
%20 is the description of the space character
%3F is the description of the question mark character
Yvan KOENIG (from FRANCE vendredi 17 avril 2009 21:56:16)

Unable to edit XLSM files in SharePoint using hyperlink?

Hi All,
Unable to edit .xlsm files using hyperlink, please guide me.
Thanks
Ramanjulu Naidu N

Hi Ramanjulu,
Did this happen to all users?
Did the "Read Only/Edit" dialog pop up when you click the .xlsm Name link from SharePoint 2010?
Could you see the yellow message bar with "Edit Workbook" button when you open the .xlsm file in your Excel Application?
You can check if the following kb article could solve yellow message bar missing problem, set "Browser File Handling" as Permissive for your web application, or update the registry for client Office application.
Also check if the add-on "SharePoint OpenDocuments Class" is enabled in your IE 32-bit browser.
http://support.microsoft.com/kb/2661910
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How do YOU organize pages, create a site map, and use hyperlinks?

I had to get out of bed to bring this up with you all; I couldn't stop thinking about this next learning curve. It is: How shall I organize the topics I have in my website? One extreme is to have all of the topics showing in all of the nav bars at the top of all the pages. The opposite extreme is ............ I cannot truly visualize it.
I think that the big obstacle for me is that i don't want to hide any pages so well, so slickly, that they can be found only by the most focused and persistent website visitor. I can see how some pages could be lost to a lot of casual website viewers.
On the other hand, there are some pages that are natural groups. In my case, the U.B.R.O.L. group is that. It is made up of five people and me. I have one page for a photo slideshow which has one photo of each of us, but then I have a separate page for Nigel and his photos, a separate page for Vali and her long bio and photos, and a separate page for Helen, her short bio and her many photos.
Tonight I tried making hierarchies using hyperlinks, so that U.B.R.O.L. shows up in the Site Menu, but Nigel, Vali, Helen, and Peggy do not show up. To get to their photos, one would have to click onto the U.B.R.O.L. group page. Once at the U.B.R.O.L. page, one can then click onto Vali's, Nigel's, and Helen's page, and then from each of their pages there are 3 hyperlinks: one to return to U.B.R.O.L., and three more hyperlinks to click onto the others who have personal pages. (Peggy does not have a personal page because she is shy and never gave me more photos or a bio of herself. She prefers anonymity.)
But even though I put those hyperlinks on those pages, I am having an internal concept war, my friends, and a solution is not at hand.
I am thinking of how I am going to deal with the pages made for me, my husband, and my husband and I together.
I cannot imagine clearly how a Site Menu would look at the topmost level and much less of an idea how each page would look several levels down.
I welcome any direction you could send my way. I would like to know how you organized your pages, how you decided which pages would not be listed in the nav bar, and what you did to/with the pages that were not listed in the nav bar.
Would you please send me the URL of your website so that I can SEE what you are talking about? I am not good at imagining what people say; I have to see it rather than imagine it.
Lorna in Southern California

Lorna, mostly from reading books, Iearned the following things.
•Don't make me think (actually the title of an excellent book on webdesign)
•Every information should be available in at most 3 clicks
•Tell them where they are, where they can go and where they have been.
IMHO, iWeb lends itself fairly well for these last 2 criteria. The Navbar is a very useful tool and I suggest you do not go too far away from it.
On my current issue of the toy theatre magazine (which is NOT a beautiful website) I wanted to go in 3 languages; English, German and Dutch. I knew i was courting disaster but one can be so ambitious. This in fact meant that I had to do 3 sites. Sites being defined as a group of pages structurally belonging to each other.
So I made an Index/Splash page with a nice picture, a title and 3 flags. These being links to the 3 versions. (I did not want to make them think on the Splashpage).
Clicking a flag brings the visitor to a Contents page on their version of the site. Just like the Contents page in a book. Here they can choose to go to any of the items and on each and every page of the site is a Contents button that returns them there.
Pages are numbered in the middle of the website, and to the leftside the number of (and link to) the previous page and to the right the same for the next page.
The current issue is number 25, ( http://www.vischmarktpapierentheater ), the previous 24 were done in Freeway and the design stems from there.
The translation to iWeb did work well but in the end the result was disappointing mostly because I wanted some slideshows, hated the "None .Mac accounts" version and went overboard with Keynote slideshows, really ugly.
The other problem stems from the triple language idea. This meant that I had to do either 3 versions of each slideshow, or make one version accessible for every language. This menat some convoluted linking which I will never do again.
In short If you want to go "deep", make various sites and link each starting page to you Index/Splash, keep the starting pages of each site on the Navbar Make a Contents sidebar or something like that on each of the starting pages, and than you can go anywhere within the required 3 clicks.
Good Luck
Harry

How to pass radiobuttons using a submit statements.

Hi All,
Can anyone tell me how to pass radiobuttons using Submit statement.
My problem is that I am able to pass one select option and one parameter using the statement:
submit (v_repid) to sap-spool without spool dynpro
                   spool parameters s_print_parms
                   using selection-screen '1000' WITH SELECTION-TABLE t_rspar_tab
                   and return.
This selection screens got to check selections based on 2 radio buttons available in the selection screen which also i need to pass through SUBMIT.Please let me know how do i pass this to the Submit statement.
Thankx in advance...
Helpful answers will be rewarded fully...

Hi Susanth,
               Create Variant for the calling program, Give that variant( here in the below program variant for calling program that I created is VAR1) in the calling program in SUBMIT Statement.
<b>
CALLING PROGRAM:
</b>
data:
w_variant(5) TYPE c VALUE 'VAR1'.
SUBMIT YH625_CALLED_PROGRAM USING SELECTION-SET w_variant.
<b>CALLING PROGRAM:</b>
TABLES spfli.
parameters:
      w_radio1 RADIOBUTTON GROUP g1,
      w_radio2 RADIOBUTTON GROUP g1.
SELECT-OPTIONS s_table FOR spfli-carrid.
WRITE '*************** This is Called program output **********************'.
Hope this solves your problem.
If you any query you are welcome.
Regards,
V.Raghavender.

Cannot pass Value Using getURL() in Flex 2.0

I have pasted a piece of code to pass value using query
string,I am sure there wouldn't be any problem with code.But I get
error calling getURL() method.
The error I am getting on compilation is,
Call to a possibly undefined method getURL.
4: {
5: getURL("QueryStringSample.mxml");
6: }
I also tried giving entire url as "
http://localhost:8080/Test/QueryStringSample.mxml",
since I am running the application using local Tomcat server.both
the mxml apps,That is, calling.mxml(PassParam.mxml) and
called.mxml(QueryStringSample.mxml) are in same package/Folder
(Test).
what is the cause for this probblem .
my code..
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
>
<mx:Script>
function passVal():void
getURL("QueryStringSample.mxml");
</mx:Script>
<mx:VBox>
<mx:HBox>
<mx:Label text="Name: " />
<mx:TextInput id="nameInput" />
</mx:HBox>
<mx:HBox>
<mx:Label text="Hometown: " />
<mx:TextInput id="homeTownInput" />
</mx:HBox>
<mx:Button label="pass param" click="passVal();" />
</mx:VBox>
</mx:Application>
Thanks in Advance.

Now that the Flex 2.0 forums are all set up, it is time to
start using them for 2.0 questions. So in the future, don't post
2.0 questions here.
In the meantime, getURL has been changed to navigateToURL().
See the docs for details.
Also, I think you are mixing Flex 1.5 and 2.0. 2.0 does not
use a server, and you do not call mxml file directly. Instead you
compile the swf with FlexBuilder or the command line compiler, and
call the html wrapper.
Tracy

Linking KN9 files together using hyperlinks, fades to black

When linking KN9 files together using hyperlinks, I press play the document being linked to fades in, then out to a black screen and after a couple of seconds returns to the files open files on my desktop.
I've checked all the setting and it even does it on 2 empty pages I tested with no transitions or document settings.
If I open both document before pressing play it's OK but because I have several large files being linked together I dont want to have to open all the files before presenting to clients etc.
Thanks!

The History
I reported the hyperlinking problem over a year ago when I updated Keynote from version 5.0.5 to version 5.1. According to the Apple tech that I wroked with at that time the Apple engineers had reproduced the issue and had put it on the fix list (Case 235638615). I then worked with Apple in December 2011 to test a version that supposedly fixed the problem, but did not, so Apple sent me a data logging monitor program which I ran and sent back. The Apple tech asked me to be patient as it might take awhile for the Apple engineers to fix the issue. When version 5.2 came out I reran my testing suite of presentations and found that the hyperlinking issue had still not been fixed. I have tried to contact Apple about my case since July 26th - my emails to the Apple tech with whom I worked back in December bounce back as undeliverable and he does not answer his phone (I have left messages with no replies) plus when I try to use Apple support to follow up on the case, all I get is a message to contact my Apple tech (Doh!). If Apple techs or Apple engineers watch the forums I hope they look into unresolved Case 235638615.
The Workaround
Hyperlinking worked fine with 5.0.5 - the .key files would load and display and did not have to be preloaded prior to runing the linked presentations. Version 5.1 through the current version 5.2 require all of the linked presentations to be preloaded prior to running them. Prior to the current version of Lion, I was able to manually run version 5.0.5 to successfully run my system of 32 presentations. The only downsides were that I could not use any transitions or animations introduced with version 5.1 and I had to force quit Keynote 5.0.5. However, when I tried that solution this month, it would not work. So I created an Automator app to load the appropriate subset of presentations for each day of the five day class and used version 5.2. Everything went okay with preloaded presentations.
I love using Keynote and do not want to go back to PowerPoint, so I hope Apple fixes this issue. I think we have been more than patient with the Apple engineers.

Staroffice Basic, Calc, passing and using ranges

Okay, I was trying to transfer a VBA function from Excel to StarOffice.
The routine call looks like this:
=PS_MUL($K$22:$K$277 ; $L$22:$L$277 ; $F$22:$F$277 ; F22)
That is, there are three ranges, and a value input.
Here is my attempt at STAROFFICE's version of this routine
Function PS_MUL(Tay1_A as Object, Tay2_A as Object, Rank_Vector, Rank_A as Long) as Double
   Dim Product_sum as Double
   Dim Element1 as Double, Element2 as Double
   Dim i as Integer, j as Integer
   Dim cell1 as Object, cell2 as Object
   Product_sum=0
   i=0
   For Each Element1 in Rank_Vector
      i=i+1
      j=0
      cell2=Tay2_A.GetCellByPosition(i,0)
      For Each Element2 in Rank_Vector
          j=j+1
          cell1=Tay1_A.GetCellByPosition(j,0)
          If Element1+Element2=Rank_A Then Product_sum=Product_sum+cell1.Value*cell2.Value
      Next Element2
   Next Element1
   PS_MUL=Product_sum
End FunctionIn VBA, I simply refereced "Product_sum=Product_sum+Tay_1A( i ) * Tay_2A( j )"
That is, the input cell ranges are 1-D arrays, and Tay_1A was implicitly defined. So I just used them as arrays, and no problem.
Here, no matter what I try to do with my code, including getting a cell reference by position and taking its value or whatnot, I still get errors.
I think it is becoming clear to me that I don't understand how to pass and use range references in StarBasic.
If anybody could help me out with understanding passing and using these range references, I'd appreciate it.
Just for comparison, here is the function in VBA:
Function CombSumProd(Tay_1A, Tay2_A, Rank_Vector, Rank_A As Variant) As Variant
Dim Product_sum As Variant, Element1 As Variant, Element2 As Variant
Dim i As Integer, j As Integer
Product_sum=0
i=0
For Each Element1 in Rank_Vector
i = i+1
j = 0
For Each Element2 in Rank_Vector
      j=j+1
      If Element1+Element2=Rank_A Then
             Product_sum=Product_sum+Tay1_A(i) *Tay2_A(j)
   Next Element2
Next Element1
CombSumProd=Product_sum
End Function

Hi
Follow the steps below - (I am assuming that you are using BI queries in your model & your tabs are as per quarter - one tab for each quarter)
1. Create one radio button & in entry list create static list as 1 - Quarter 1, 2 - Quarter 2 & so on.
2. Now you want plan Vs actual in one graph & Currency in another. So create these reports for each quarter separately, so in all you will have 8 reports (2 for each quarter)
3. IN the layout you have to arrange it vary carefully, you take all the 'Plan Vs Actual' report for all the quarters & arrange them exactly one over the other. Same for Currency reports also.
4. NOw Give visibility condition for each report example - if report is for first quarter then condition will be - bool(if(radio button string=="1",true,false)) & assign the default value in radio button as 1. so that at the time of execution you will get these reports by default.
5. Like wise give condition for all.
6. When you execute this report you will get radio buttons at the top & as you select different buttons differents report will get opened.
7. As you have plased these exactly one over the other, user will not come to know these are different reports.
Try this method, if you have any doubts for this, please do ask me.
Regards
Sandeep

To coerce passed values, use the In Range and Coerce function.

-" Device Number for Card 1 uses data range coercion, which now only applies to data entry; values will not be coerced when passed to subVIs. To coerce passed values, use the In Range and Coerce function."
Hi,
I had program runnning fine in labview version 5.0, Recently i updated to labview version 6.0, but when i opened file i will see many warnings like above.
I saved the file as 6.0, all the warnings are gone and program compiles as well but i am not sure saving as 6.0 eliminate those problems like..."value will not be coereced when passed to subvis"

It means that some of your controls use coercion to alter data if it is not within a range. In LV 5.0 this worked for either typing the data into the control or passing it through the connector as a sub-vi. In 6.0 the data won't be coerced if it has been passed through the connector as a sub-vi, only if it is entered on the front panel. If your sub-vis relied on this coercion to operate properly then you will need to add the "In Range and Coerce" function to your block diagram to manipulate these values. If the coercion wasn't important then disregard the warning.
Hope this helps
Brian

How can we use hyperlinks in forms 9i

How can we use hyperlinks in forms 9i..
I looked at the sample but it appears blank.
Will you please tell me what is the code to hyperlink display items in forms 9i.
Thanks in advance.

Download the 10gR2 demo zip file. Its called "hyperlink". Note that this is a demo only and may or may not work the way you want or even as we intended. No QA has been performed on this PJC.

Opening child report through master report using hyperlink

HI Experts,
I have a requirement where, I need to create a child report which will open through a master report using hyperlink.
I have to use BIP desktop (MS word) and need to create a RTF template using XML file.
Can you please guide me, how I can achieve this?
Regards,
Suhasini
Edited by: 942451 on Jun 28, 2012 9:48 PM

Take a look at this blog post: http://bipconsulting.blogspot.com/2010/02/drill-down-to-detail-or-another-report.html
Thanks,
Bipuser

Defining Items Passed Using Hyperlink in InfoView

Hi Experts,
I'm trying to use the hyperlink function in WebIntelligence InfoView to pass parameters to another report. Yet instead of the typical functionality where you would pass a particular value, I wish instead to pass the field name itself.
Think of it like a drill down. I have a high level report with a number of fields in it, including 'Total Amount'. If I click on the 'Total Amount' field, I want to execute another report that will be run with 'Total Amount' as the selection for the 'Field' prompt on that report.
So far I have been able to pass values very easily, but I can't seem to get the field name across. Any idea how to do this?
Thanks,
Brian

This is possible using the =NameOf([FIELD]). That said, it doesn't fully solve the problem given that I can't automatically have the field titles turned into hyperlinks to another report.
Another 'feature' I suppose.

Using Hyperlink and passing parameters

i need to use the hyper link option on a field and when clocking this hyperlink i want to open another crystal report and passsing some parameters from the first report to the second one and using them in the second
is it anything like this?
"report2.rpt?ParameterName="+{report1.Field}
thanks,
Rami Dahabreh

boe user,
Try this:
="<a href =" + "http://webwasqwn1.ecorp.cat.com:8322/OpenDocument/opendoc/openDocument.jsp?sType=wid&sDocName=fsitem&lsSEnterItem Node Name:="Query 2.Item Node Name(If IsPromptAnswered("Enter FS Items") Then "&lsSEnterFS Items:="+URLEncode(UserResponse("Enter FS Items:"))) + Object + ""
Have a look on this thread also:
Linking 2 web I reports
I'm Back

Can we pass values when hyperlinking a classic report column?

Version 4.2.1 (builder blue)
Hi there,
I have a classic report in which I have hyperlinked a column, using the standard link option in the report settings. In that we can also pass on values to to page that the linked report opens. However, I notice when I pop up the window for the value to be passed, it only lists the #XY# contents of the report. Lets say, I have created the link on page1 which when clicked opens Page 2,
I want to pass the value of :P1_PERIOD to :P2_PERIOD
Can we not do that through the link? If I just put the value in Item1 as P2_PERIOD and populate it with :P1_PERIOD, wouldn't that work?
Thanks,
Ryan

ryansun wrote:
Version 4.2.1 (builder blue)
Hi there,
I have a classic report in which I have hyperlinked a column, using the standard link option in the report settings. In that we can also pass on values to to page that the linked report opens. However, I notice when I pop up the window for the value to be passed, it only lists the #XY# contents of the report. Lets say, I have created the link on page1 which when clicked opens Page 2,
I want to pass the value of :P1_PERIOD to :P2_PERIOD
Can we not do that through the link?Yes, you can, but not using that syntax.
If I just put the value in Item1 as P2_PERIOD and populate it with :P1_PERIOD, wouldn't that work?No, <tt>:P1_PERIOD</tt> is referencing the item using bind variable notation. That's only for use in SQL and PL/SQL contexts within APEX. Elsewhere in APEX (HTML source, links and branches etc) you need to reference item values using static text substitution:
&P1_PERIOD.(Note the terminating dot.)
Put <tt>P2_PERIOD</tt> in Item 1 Name and <tt>&P1_PERIOD.</tt> in Value.

Passing page_url using hyperlink

Similar Messages

Maybe you are looking for