Passing Parameter from 1 R/3 system to another

Dear Gurus,
I would like to know, if there is a possibility, by which you can pass or call a parameter/variable (with its value) from an ABAP Program in 1 R/3 System to another ABAP Program in 2nd R/3 system ??

HI,
For that you need to create RFC enabled function modules in one server and Call that function module in another server.
Create the FM in System A using SE37 and go to ATTRIBUTES tab and click the Remote Enabled Module radio button.
Call this FM in System B, using CALL FUNCTION "FM_Name" DESTINATION 'SYSTEM_A'.

Similar Messages

How to pass parameter from 1 stored procedure to another stored procedure inside crystal report

Hi
I have several stored procedure in my Crystal Report. I am wondering if it is possible for me to pass a parameter to one of the stored procedure and to use the result of that stored procedure E.g. CustomerCode. To another 2 stored procedure to generate the report dynamically?
I have 3 stored procedure
The 1st one is used to gather information and process the calculation
another 2 stored procedure is used for generate the graph and both of them required to take 2 parameters. The 1st stored procedure will require 1 parameter (E.G. Reference Code) and will return a set of information including the data that could be use on the other 2 stored procedures.
After I added these 2 stored procedure, it requires me to pass 3 parameters to the report. I would like to know if I could only pass the Reference Code for stored procedure 1 and use it to retrieve the information for the other 2 parameter?
Thanks in advance
Chi

Hi Chi
To pass parameter from 1 stored procedure to another stored procedure, you will have to create sub report. In your case you will have to create 2 sub reports for 2nd and 3rd stored procedure and link those sub reports with the main report using Reference Code field in order to pass the values.
After creating the report when you will refresh the report, it will ask 4 parameters, one parameter for main report, one for the first subreport and two for second subreport to fetch the data correctly.
Regards
Poonam Thorat.

Problem passing parameter from one interactive report to another

Hi.
I'm going slightly mad over this simple problem.
Apex 4.0.2 installed. Created one interactive report with 4 columns, one is linked to a custom target which is another interactive report where the column is used in the WHERE clause through a hidden field value.
This works fine in other applications on same Apex install, but not in this one.... Writing the hidden field to the screen shows that it gets the correct value from the first report, but the SQL-query returns no rows when querying on the :<parameter_name> value (there are rows in database - query runs fine when hard coding a value).
Tried link column both directly from the column value link definition, and from the report definition - both pass value ok to hidden field, but SQL-query doesn't pick it up.
Tried deleteing and recreating second report page, same problem.
Anyone else had this problem? Are there any properties on the pages/fields that I've forgot to set, that may cause the session value not to be set when the query is running? I've got it working in other apps, and can't find anything done differently there....
Regards,
-Haakon-

Yes, it shows the correct value. Also creating a second text field and assigning it the Source value of the hidden field shows the correct value in the textbox on page load.
It's only the report's sql query that doesn't seem to get the value. Hard coding a document number (without hyphens etc) works fine, I get the expected records - so the rest of the query is correct.
Tried '=' and LIKE - but still nothing...
It's just the sql variable substitution of :P21_DOCNO that under no circumstance will work.... also tried a simple pl/sql block with the variable - nothing.... using the V('P21_DOCNO') - nothing....
It seems like the sql query is parsed and run before the hidden field gets it's value or something....
This is very strange - as it works in another application on same Apex installation.

Not able to pass parameter from one fragment to another fragment in another taskFlow

Hi,
I'm trying to pass parameter from one fragment to another fragment and want to print the parameter value in second fragment.
i have inputtext in first frag---
first fragment belongs to one taskflow1 and this taskflow1 i had darg and drop to one mainPage.
Under taskflow1 itself i drag and drop one taskflow call activity and on top of that i drag and drop another bounded taskflow as taskflow2
under taskflow2 i have one fragment as fragment2and in that i have one outputtext field, now here i want to print the value from fragment1--inputtextfield value
to achive this i had tried many ways but somewhere doing mistake please explain step by step.
Thanks
Mahesh

In addition you need to tell us your jdev version!
Can you elaborate on your use case a be more?
On which event this should happen?
In general contextual events should allow you to implement this, however, as I don't understand the use case, I find it hard to help.
Timo

Pass a parameter from one ASP portlet to another ASP portlet

We are trying to pass a parameter from one ASP portlet to one or more other ASP portlets.
We are using PDK-URL Services and have created a provider.xml for each of the ASPs and the ASPs work as normal within the portlets created.
We are now trying to use PDK-URL Services to pass parameters to a portlet. As a first step we set up a portlet which displayed an ASP, this ASP (and the portlet) expected a parameter. If the parameter value is left blank the Portlet displays a default page (not the ASP page) for passing in the parameter i.e. a text box and a submit button. If the parameter is entered and submitted the ASP page returns and the results of the query are based on the parameter typed in.
As the next step what we are now trying to do is pass a parameter from one ASP portlet to another.
The Documentation says that there are two types of parameters Qualified where Parameters will be passed only to the initiating portlet i.e., portlet which contains them and Unqualified where all portlets will be affected by the parameter sent by any portlet.
Very little information was available on this, apart from the one liner explanation of each (above).
When we tested the above, using the PDK sample ("ParamCustomizationPortlet") portlets it doesn't appear to be doing anything in particular.
Any ideas on the best approach to passing parameters from one ASP portlet to another?
Thanks for your time.

We can visualize Qualified and Unqualified parameters only when there are multiple portlet instances in a single page. For example, add two instances of ASP portlet you have created, and submit from one portlet. You can see the other portlet also receiving this parameter, provided you are using unqualified parameters.
Thanks,
Amjad.

Passing data from one bsp application to another

Hi,
I have few queries that most of you would have done in ur projects:
1. I want to pass data from one bsp application to another:
eg based upon selected row of table view which populates material no and descriprion to another application which open the entire material master data.
Now, i have both the pages in diff bsp applications in place but unable to pass the selected material code to the second bsp application.
Had it been two different pages of same application I was able to achieve it with set parameter()
2. To stop the application from reprcessing the data:
eg: Suppose I have a bsp page where user fill details of a customer and on submitinng the details a customer is created in background and the entire page is disabled by my code. Even now if the user press refresh (F5) button then another customer gets created in the background. So basically i want to avoid the reprocess of the onSubmit event
Few lines of sample code would be very helpful.
Best Regards,
Saurabh Tripathi

Hi,
When I am writing the following code in appl1/page1:
        export abc from transactionID
        to data buffer lv_page_data.
        CALL METHOD CL_BSP_SERVER_SIDE_COOKIE=>SET_SERVER_COOKIE
          EXPORTING
            NAME                  = 'TRANSACTIONID'
            APPLICATION_NAME      = RUNTIME->application_name
            APPLICATION_NAMESPACE = RUNTIME->application_namespace
            USERNAME              = ls_name
            SESSION_ID            = runtime->session_id
            DATA_VALUE            = lv_page_data
            DATA_NAME             = 'lv_page_data'
and following code in appl2/page2:
CALL METHOD CL_BSP_SERVER_SIDE_COOKIE=>GET_SERVER_COOKIE
    EXPORTING
      NAME                  = 'TRANSACTIONID'
      APPLICATION_NAME      = RUNTIME->application_name
      APPLICATION_NAMESPACE = RUNTIME->application_namespace
      USERNAME              = ls_name
      SESSION_ID            = runtime->session_id
      DATA_NAME             = 'lv_page_data'
    CHANGING
      DATA_VALUE            = lv_page_data
   IF lv_page_data IS NOT INITIAL.
     IMPORT abc to transactionid
       FROM data buffer lv_page_data.
   ENDIF.
still the code doesn't work. Please explain and guide
Best Regards,
Saurabh Tripathi

Master-detail relationship - passing parameter from form to form

Hello.
I have a question about master detail relationship.
In first form we have master-detail relationship.
Example on dept, emp tables:
We query dept (master), so we can get one or many emp (detail) records. Then we have a third table - tasks. Tasks table (detail) can have many records for one employee.
Tasks table is in another form, which is called with call_form built_in. So we pass a parameter from master to detail - parameter empno. Because of that, we can only see tasks for one employee and can't navigate to another employee. This is normal.
Now comes the question.
Is it possible to call a form (with tasks table) with deptno parameter (so we can navigate through all employees with that department), but first show employee that was last used in first form?
Example of our goal.
Master: deptno = 20
Detail: navigate to JONES employee
Call new form (tasks)
Tasks for JONES employee are first shown
Can navigate to another employee - without requery
Is this possible?
If we pass deptno parameter, we can navigate through all employees - but must navigate to the employee we last used in first form.
If we pass empno parameter to second form, we see last used employee but cannot navigate to another employee without requery.
Hope you understand my problem.
Thanks.

Hi
yes you can pass parameter from one form to another.
In your master detail form set the trigger when-new-instance and there define the global variable like
:GLOBAL.G_CIRCLE_ID := NULL;
and in your task table set the trigger when-new-instance and there define the global variable like and also write this code
:GLOBAL.G_DIVISION_ID := NULL;
IF :GLOBAL.G_CIRCLE_ID IS NOT NULL THEN
     GO_BLOCK('DIVISION');
     SET_BLOCK_PROPERTY('DIVISION',DEFAULT_WHERE,'CIRCLE_ID ='||''''||:GLOBAL.G_CIRCLE_ID||'''');
     EXECUTE_QUERY;
END IF;
:GLOBAL.G_CIRCLE_ID := NULL;
now you maintain your trigger according your need.
Regards,

Problem while passing parameter from report to report.

Hi
I'm using forms and reports 10g, hava a problem while passing the parameter from reports to report.
i'm using srw.set_hyperlink to call report from report.
i have created a key value in the cgicmd.dat file called
faccre802005-2006: report=faccre80 destype=cache desformat=pdf userid=<userid/passwd@cs> server=<servername>
Now in the format trigger i'm using this key value
function BTN_DEBITFormatTrigger return boolean is
temp varchar2(5000);
IP_ADDRESS VARCHAR2(50);
SERVER_NAME VARCHAR2(10);
L_ACCT_CODE VARCHAR2(14);
begin
SELECT MAST_INT_DESC,MAST_USER_PGM_ID INTO IP_ADDRESS,SERVER_NAME FROM MAST_INT_INFO WHERE MAST_INT_ID='VISHWA';
temp := IP_ADDRESS||'?faccre80'||:P_FIN_YEAR||'+server='||server_name;
temp :=temp ||'+'||'P_PREVIOUS_CODE='''||:ACCT_CODE||''''||'+'||'P_COMPANY_CODE='''||:P_COMPANY_CODE||'''';
temp :=temp ||'+'|| 'P_FROM_DATE='''||TO_CHAR(:P_FROM_DATE,'DD-MON-RRRR')||''''||'+'|| 'P_TO_DATE='''||TO_CHAR(:P_TO_DATE,'DD-MON-RRRR')||''''||'+'||'P_TRUST_CODE='''|| :P_TRUST_CODE||'''';
temp :=temp ||'+'|| 'P_UNIT_CODE='''||:P_UNIT_CODE||''''||'+'||' P_FIN_YEAR='''||:P_FIN_YEAR||'''';
temp :=temp ||'+'|| 'P_LEVEL='''||:P_LEVEL||''''||'+'||'P_HEADER='''||replace(:P_HEADER,' ','%20')||''''||'+'||'P_FORMAT='''||:P_FORMAT||'''';
SRW.Set_Hyperlink(temp);
END;
return (TRUE);
end;
Report is coming but not the expected result because parmaeters are not coming from first report to second report.
If i dont use cgicmd file userid and password are displyed in the URL.
Pl tell me how to pass parameter from one report to another.
thanks and regards

Hi
I got the solution.
I forgot to add %* at end of the KEY value.

How to transfer JPG/JPEG from one SAP system to another?

I am not sure this is something that is easily possible, if even possible, and can't find anything about it.
Does anyone know how to transfer a picture (JPG/JPEG) from one SAP system to another (both 7.00+)?
Scenario would be something similar to uploading a photo into one SAP system, then having it pass it to a central SAP system.
Any thoughts about how or if it is possible would be helpful.
Thanks,
Jake

Hi,
I can think about at least two ways. One way is using web services or RFC. You can create a RFC enabled FM which would return a string of bytes (type XSTRING) for some particular ID. It's pretty easy to expose RFC enabled FM as web service. Consuming web service from ABAP is easy as well. Another solution is using REST based interface. You would write a HTTP handler which would return a jpeg image for particular ID. For example URL would look like http://<hostname>/image/?id=ABC and client would just call GET request for this URL and response would contain jpeg image.
Cheers

How to pass data from one internal session to another internal session

hi all sap experts ,
How to pass data from one internal session to another internal session and from oneExternal session to another external session.
Except : Import and Export parameters and SPA/GPA parameters.
Tell me the otherWay to pass data ..
Plz
Thanks in advance

hi,
abap memory management u will understand about this concept.
the import /export parameter will help u that passing data between two internal sessions by using abap memory.
for syntax
Passing Data Between Programs
There are two ways of passing data to a called program:
Passing Data Using Internal Memory Areas
There are two cross-program memory areas to which ABAP programs have access (refer to the diagram in Memory Structures of an ABAP Program) that you can use to pass data between programs.
SAP Memory
SAP memory is a memory area to which all main sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters can be set either for a particular user or for a particular program using the SET PARAMETER statement. Other ABAP programs can then retrieve the set parameters using the GET PARAMETER statement. The most frequent use of SPA/GPA parameters is to fill input fields on screens (see below).
ABAP Memory
ABAP memory is a memory area that all ABAP programs within the same internal session can access using the EXPORT and IMPORT statements. Data within this area remains intact during a whole sequence of program calls. To pass data to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse. For further information, refer to Data Clusters in ABAP Memory.
Filling Input Fields on an Initial Screen
Most programs that you call from other programs have their own initial screen that the user must fill with values. For an executable program, this is normally the selection screen. The SUBMIT statement has a series of additions that you can use to fill the input fields of the called program:
Filling the Selection Screen of a Called Program
You cannot fill the input fields of a screen using additions in the calling statement. Instead, you can use SPA/GPA parameters. For further information, refer to Filling an Initial Screen Using SPA/GPA Parameters.
Message was edited by:
sunil kumar
Message was edited by:
sunil kumar

How to pass data from one internal session to another

Hi SAP Experts,
How to pass data from one internal session to another and from One external session to another external session. I used import and export parmeter and SPA/GPA parameters. What is the other way to pass data?
Please tel me urgently
Thank you
Basu

Memory Structures of an ABAP Program
In the Overview of the R/3 Basis System you have seen that each user can open up to six R/3 windows in a single SAPgui session. Each of these windows corresponds to a session on the application server with its own area of shared memory.
The first application program that you start in a session opens an internal session within the main session. The internal session has a memory area that contains the ABAP program and its associated data. When the program calls external routines (methods, subroutines or function modules) their main program and working data are also loaded into the memory area of the internal session.
Only one internal session is ever active. If the active application program calls a further application program, the system opens another internal session. Here, there are two possible cases: If the second program does not return control to the calling program when it has finished running, the called program replaces the calling program in the internal session. The contents of the memory of the calling program are deleted. If the second program does return control to the calling program when it has finished running, the session of the called program is not deleted. Instead, it becomes inactive, and its memory contents are placed on a stack.
The memory area of each session contains an area called ABAP memory. ABAP memory is available to all internal sessions. ABAP programs can use the EXPORT and IMPORT statements to access it. Data within this area remains intact during a whole sequence of program calls. To pass data to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse.
All ABAP programs can also access the SAP memory. This is a memory area to which all sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters are often used to preassign values to input fields. You can set them individually for users, or globally according to the flow of an application program. SAP memory is the only connection between the different sessions within a SAPgui.
The following diagram shows how an application program accesses the different areas within shared memory:
In the diagram, an ABAP program is active in the second internal session of the first main session. It can access the memory of its own internal session, ABAP memory and SAP memory. The program in the first internal session has called the program which is currently active, and its own data is currently inactive on the stack. If the program currently active calls another program but will itself carry on once that program has finished running, the new program will be activated in a third internal session.
Data Clusters in ABAP Memory
You can store data clusters in ABAP memory. ABAP memory is a memory area within the internal session (roll area) of an ABAP program and any other program called from it using CALL TRANSACTION or SUBMIT.
ABAP memory is independent of the ABAP program or program module from which it was generated. In other words, an object saved in ABAP memory can be read from any other ABAP program in the same call chain. ABAP memory is not the same as the cross-transaction global SAP memory. For further information, refer to Passing Data Between Programs.
This allows you to pass data from one module to another over several levels of the program hierarchy. For example, you can pass data
From an executable program (report) to another executable program called using SUBMIT.
From a transaction to an executable program (report).
Between dialog modules.
From a program to a function module.
and so on.
The contents of the memory are released when you leave the transaction.
To save data objects in ABAP memory, use the statement EXPORT TO MEMORY.
Saving Data Objects in Memory
To read data objects from memory, use the statement IMPORT FROM MEMORY.
Reading Data Objects from Memory
To delete data clusters from memory, use the statement FREE MEMORY.
Deleting Data Clusters from Memory
please read this which provide more idea about memory
Message was edited by:
sunil kumar

How can I pass parameters from one process flow to another process flow?

How can I pass parameters from one process flow to another process flow (sub process) in warehouse builder? let me know the steps I have to do in warehouse builder.
Thanks in advance,
Kishan

Hi Kishan,
Please post this question to the Warehouse Builder forum:
Warehouse Builder
Thanks, Mark

How can I pass data from a form guide to another form in a business process

How do we pass data from a form guide to another form(not necessarily a guide) without having to open the form. For example we have a small form guide to capture the contract id so we can then get data from contracts table to present to the user in a form. We want the user to open the guide (either Flex guide or form guide) to enter the contract id. Upon submission we want the process to get the contract data and put it into the form that will be opened at the next step by the user without having a user interact with the form to get the data into it. In other words we need the process to get the data and populate a different form than the form guide the contract id was entered in and this new form needs to be opened in the next step by the user.

Firstly, I'm assuming that you have a Forms ES Server if you are rendering a Guide. This could be either version ES1, ES2/2.5 or ES3/ADEP
If you submit the form back to the server, you can populate a second (PDF/XDP) form with the data bound to the same schema/Data Model using Forms ES.
You referred to the next user in the chain - If you are using Process Management, this is very easy, as you define what form is used to render the data in the "Presentation & Data" section of the Assign Task activity

Need of XI to send an XML from one SAP system to another SAP system

Dear colleagues,
I work in the SRM solution.
In SRM there is a Purchaser and Supplier scenario called Supplier Self Services.
The Purchaser creates a Purchase order and sends it to the supplier in form of an XML file.
The purchaser system and supplier system are the same SAP system but different clients.
Example: Purchaser client is 300 and Supplier client is 330 and both of them are on the same system.
I have a very basic question.
Currently we have the XI system which acts as an interface to send the Purchaser PO XML to the Supplier as XML.
a)My question is in case the XML structure is identical across both the clients, then what is the need of XI system?
b) Is it not possible to send XML from one client to another without an XI system? there si no need of any message mapping required since I am expecting the same XML structure in both clients.
Please clarify the need of XI system in the following scenario. Is it not possible without XI?
Many thanks.
Best regards,
Srivatsa

Hi Srivatsa,
YOu can send the XML message from one sap system to another sap system even without an XI system in between.
But the use of SAP XI (Or any other middleware) is recommended because, it gives you the following advantages.
1) Better monitoring and alerting mechanism. XI provides you robust set of tools that let you monitor the status of the messages that are exchanged.
2) Direct communication between systems is referred to as Point to Point communication, which has its own disadvantages as against Hub and SPoke model (Message exchange using XI).
3) Message delivery is guaranteed if you have XI in between.
If the target system is down, the sender sap system will not try multiple times to post the message.
But if you use XI, it can be configured to send the message multiple times, till it succeeds.
Regards,
Ravi Kanth Talagana

How to pass parameter from form6i to report6i

when i passed parameter from form6i to report6i, while previewing report the data was not displaying only fields heading was displaying, but in report6i there is a parameter form thru that it was displaying data, but thru form6i to report6i it was not. Please kindly help me and give me the some sample or example of it.
Thanks
Best regards
Zaheer

ADD_PARAMETER(pl_id,'P_SCRIPT',TEXT_PARAMETER,:b1.script);

How can I pass parameter from report to form?

Hi :)
Now I try to build conference room like this by using form
and report. And i design that when users click at group report
then i'll show page that contain questions report and add
question form. And question form and report must receive the
same parameter from group report.
First Problem: is I don't know how group report send the
same parameter to question report and add question report at the
same time. And is it possible??? If not please suggest me what
should I do???
Second Problem: is I don't know how can I pass parameter from
report to form. I don't know the way to do it.
Please tell me!!! Please...
I look forward to hearing from all of you.
Thank You.

One way is to create a link based on that form and attach that
link with the report. Through links you can pass parameters

Passing Parameter from 1 R/3 system to another

Similar Messages

Maybe you are looking for