Passing parameter from WEBI report to xcelsius

hi
i transfered the parameter from WEBI report (3.1 sp2) table using a link to a gauhe from xcelsius
i can see the parameter the right number in the gauge value but the problem is that the pin does not move

How are you connecting your report to Xcelsius? Live Office or QAAWS?

Similar Messages

  • Pass parameter from Webi to Xcelcisus Dashboard in BO4.0

    Hi All,
    Please explain me how to pass para maters from webi report to Xcelsius Dashboard.
    Your Help is Highly appreciated.
    Thanks
    Arvind Shukla

    Hi
    this can be done with the help of document link.
    just create a document link in the webi.
    steps 1. right click on the field and select create document link.
    step 2 past the document link of dashboard.
    make sure the prompt name should be same.

  • Xcelsius - Pass Parameter to WeBi Report

    Hi all,
    I want Pass Parameters from Xcelsius DashBaord to WeBi Prompt ?
    I am using Live Office to Data Conenctivity ..
    Please help me on this..

    Hi Charles,
    Iam bit confusion with that link matters.
    please below is my problem
    i have webi report with Year and Month Prompts.
    report contains country , revenue.
    now i import webi report by using Live office first.
    now i added live office connection to this report
    when i refresh the Dashborad its giving error "Failed fetch the data Data provider Data"
    i but confusing how i pass the year < month value where may dasboards containing only  country , revenue?
    please suggest me

  • Passing Parameter from Web Page to Form 6i

    Dear All,
    We are using 9i AS with Form 6i. I want to created a web page for user login and called my application By passing value
    window.open("http://hrtest/dev60cgi/ifcgi60.exe?form=login_form.fmx&width=1000&height=700&
    userid=logme/logme1@test","","width=1000,height=700,top=0,left=0,location=no,directories=no,
    status=no,menubar=no,toolbar=no,maximize=yes,resizable=yes")
    and it successfully run.
    I want to pass additional parameter to my login_form.fmx from web page like User Shift entered by user on logon ?
    Please help me out.
    Regards,
    Khurram

    I got the clue
    pass parameter in your UR
    as
    //hrtest/dev60cgi/ifcgi60.exe?form=LOGIN_FORM_Para.fmx&width=1000&height=700&userid=power/power1@hrtest&otherparams=PAKISTAN=ALLAH"
    Define a :PARAMETER.PAKISTAN on Form
    and write following trigger
    BEGIN
    if :PARAMETER.PAKISTAN = 'ALLAH' then
    message('ALLAH HO AKBAR');
    message('ALLAH HO AKBAR');
    message(:PARAMETER.PAKISTAN||' HO AKBAR');
    message(:PARAMETER.PAKISTAN||' HO AKBAR');
    else
    message('INSH'||:PARAMETER.PAKISTAN);
    message('INSH'||:PARAMETER.PAKISTAN);
    end if;
    END;
    Regards
    Khurram Altaf | Assistant Manager ERP
    Enterprise Resource Planning Department
    Kohinoor Textiles Mills Ltd
    Peshawar Road, Rawalpindi.
    +92.51.5473940-44 ext 250 | +92.333.5256626
    e-mail: [email protected] | web: www.kmlg.com

  • Passing Parameter from Main report to SQL command-based subreport

    I am trying to cut down the run time of my reports and have recently figured out how to write SQL commands to limit the data by filtering prior to being pulled into the reports.  However, many of my reports rely on multiple sub reports, which can cause a dramatic 'drag' on the report.
    I am trying to filter the SQL command used in my sub report by passing the group parameter, which is selected by the user in the main report, to the sub report's SQL command.  Without this parameter, the sub report has to sort through a lot more data than it would with this parameter, making the run time extremely slow.
    Any suggestions on how I can accomplish this?
    Thanks for any help you can provide,
    Marlene Allen
    Crystal Reports Developer
    Crystal Reports Professional;
    Product Type: Full;
    Product Version 11.5

    Hi Marlene,
    I don't believe you can pass a CR parameter to a Command object.
    I suggest replacing all of the Command Objects with a Stored Procedure so all of the data filtering is done server side. DB servers are much more proficient at collecting the data and filtering than CR will ever be. It will also allow you to replace subreports to also speed up your report processing. All depends on your layout of course but something to look at.
    Thank you
    Don

  • Pass parameter from main report to sub report?

    Post Author: nomore
    CA Forum: General
    I have a report which is comparing turnover from present year to previous year.Im trying to make it dynamic - so i have added a parameter to the main report to allow user to enter a year, however I cannot work out how to pass this to the sub report so select records based on this. I have passed the data thruogh a fomula ok (WhilePrintingRecords; Shared NumberVar shYear;)  and that is working spot on.Now i just need to enter that number as a record select paremeter. Also if I try to perform a summary on this field (it never changes, but its just a test) - the 'Insert Summary' option is unavailable, and it doesnt show up as a formula in formula editor.  

    Post Author: V361
    CA Forum: General
    I have CR XI, you want to edit your subreport links, right click the sub, select Change subreport links, you should be able to select your field, and see your parameter listed.  Once you set up the link the sub will run based on whatever link you picked.

  • Passing parameter from interactive report column link to new page

    I'm very simply trying to pass the value of the column link to the where clause on the next page.
    Interactive Report on P2 has column link fid alias in sql query.
    I read somewhere to refer prefix the interactive report column with IR ??
    So I have item name P2_FID, value #FID#. Anyway, I've tried a kazillion things.
    Created a hidden item with same source value... sigh.
    Is there a syntax to refer to a report column link, rather than an item_id in a region where clause?
    Is there a simple direct way to do this?
    Thanks,
    Pamela
    -----pls/apex/f?p=163:1:2746459963336955::NO::P2_FID:119

    Thank you Varad...
    Unfortunately, I am still getting no data found. (and there IS data).
    a) Do you mean in the link column section of the report attributes? that is done: item 1 name= IR_P2_FID, value = #FID#
    b) Do you mean my changing my hidden page item to ir_p2_fid with its source value as #FID# ? also done.
    Do I need this hidden item?, and if not how do I refer to link in the where clause of the called page's sql region?
    3) Where Fishery_id = :IR_P2_FID
    Where Fishery_id = &IR_P2_FID
    Thanks again!
    Pamela

  • Pass Parameters from Webi to Xcelsius Dashboard in BO 4.0

    Hi All, Please explain me how to pass para maters from webi report to Xcelsius Dashboard. Your Help is Highly appreciated. Thanks Arvind Shukla

    Hi,
    we can do this with the help of document link in webi.
    just we have to pass the document link  of dashboard
    and make sure that prompt text should be same.

  • Problem while passing parameter from report to report.

    Hi
    I'm using forms and reports 10g, hava a problem while passing the parameter from reports to report.
    i'm using srw.set_hyperlink to call report from report.
    i have created a key value in the cgicmd.dat file called
    faccre802005-2006: report=faccre80 destype=cache desformat=pdf userid=<userid/passwd@cs> server=<servername>
    Now in the format trigger i'm using this key value
    function BTN_DEBITFormatTrigger return boolean is
    temp varchar2(5000);
    IP_ADDRESS VARCHAR2(50);
    SERVER_NAME VARCHAR2(10);
    L_ACCT_CODE VARCHAR2(14);
    begin
    SELECT MAST_INT_DESC,MAST_USER_PGM_ID INTO IP_ADDRESS,SERVER_NAME FROM MAST_INT_INFO WHERE MAST_INT_ID='VISHWA';
    temp := IP_ADDRESS||'?faccre80'||:P_FIN_YEAR||'+server='||server_name;
    temp :=temp ||'+'||'P_PREVIOUS_CODE='''||:ACCT_CODE||''''||'+'||'P_COMPANY_CODE='''||:P_COMPANY_CODE||'''';
    temp :=temp ||'+'|| 'P_FROM_DATE='''||TO_CHAR(:P_FROM_DATE,'DD-MON-RRRR')||''''||'+'|| 'P_TO_DATE='''||TO_CHAR(:P_TO_DATE,'DD-MON-RRRR')||''''||'+'||'P_TRUST_CODE='''|| :P_TRUST_CODE||'''';
    temp :=temp ||'+'|| 'P_UNIT_CODE='''||:P_UNIT_CODE||''''||'+'||' P_FIN_YEAR='''||:P_FIN_YEAR||'''';
    temp :=temp ||'+'|| 'P_LEVEL='''||:P_LEVEL||''''||'+'||'P_HEADER='''||replace(:P_HEADER,' ','%20')||''''||'+'||'P_FORMAT='''||:P_FORMAT||'''';
    SRW.Set_Hyperlink(temp);
    END;
    return (TRUE);
    end;
    Report is coming but not the expected result because parmaeters are not coming from first report to second report.
    If i dont use cgicmd file userid and password are displyed in the URL.
    Pl tell me how to pass parameter from one report to another.
    thanks and regards

    Hi
    I got the solution.
    I forgot to add %* at end of the KEY value.

  • Pass a parameter from webi to Xcelsius

    Hi all,
    Anybody knows how to pass a parameter from a webi report to Xcelsius via URL?
    I need to refresh the Xcelsius data with a parameter coming from the webi report. With Live Office works but only the first time: the data is not being refreshed in Xcelsius everytime I change the parameter in the webi report.
    I'm thinking in someting like openDocument.jsp but how do I read this parameter in Xcelsius? Which connection should I use?
    Thank you very much,
    jon

    Hi Peter,
    the link provided refers to Xcelsius V4.5.
    In Xcelsius 2008 you have to control Flash Vars in the Data Manager.
    Go to the Data Manager, Add the Flash-Var Connection Type, Select CSV-FlashVar and define a name and a range.
    But i am not sure if Xcelsius Engage can handle FlashVars, because i am only working with Enterprise.
    Please take a look at your manual.
    For sure there are other ways to import data during runtime. Take a Look at the Connections provided by Data Manager. (e.g. QaaWS, SSRS, LiveOffice, Webservices, ...)
    Also take a look at the link below. It might be another nice option for "pseudo" data connectivity
    http://labs.businessobjects.com/xcelsiuspublishing/default.asp
    Best Regards
    Ulrich

  • Pass parameter to ssrs report in performance point webpart from textbox text

    How to pass parameter to ssrs report  in performance point webpart from textbox text
    Please help me to solve this ...
    Bikky Kumar

    Edit your SharePoint page and add new text filter web part.
    Then pass the text filter value to your performance point report using connections. Your report should include at least one parameter to get the value. More over you can set default value in text filter.

  • Passing Value from Crystal Report (special function) to Business View parameter

    Friends,
                 Í have a scenario where i need to pass value from Crystal Report to a Business view's parameter.
    Eg : CurrentCEUsername (func in crystal report)-- gives login user  which i should pass to parameter in a Business view (used in the same report).
    Will be able to explain more if required.
    Thanks in Advance,
    Bharath

    I guess you got the picture wrong.  User_id is not a report_level parameter .
    In Data Foundation, below query is used..
    select Acc_Number, Account_Group,User_id  from Accounts where user_id={?User_id}
    where in {?User_id}  is the BV parameter...
    The Filter was a solution. But it takes long time to Query all the data from DB and then filter at BV level.
    How do i pass the CurrentCEUsername to {?User_id}
    Value should ve CurrentCEusername always. so that query will be
    select Acc_Number, Account_Group,User_id  from Accounts where user_id=CurrentCEusername
    It will restrict the data pulled from DB to BV .. right?

  • How to pass parameter from 1 stored procedure to another stored procedure inside crystal report

    Hi
    I have several stored procedure in my Crystal Report. I am wondering if it is possible for me to pass a parameter to one of the stored procedure and to use the result of that stored procedure E.g. CustomerCode. To another 2 stored procedure to generate the report dynamically?
    I have 3 stored procedure
    The 1st one is used to gather information and process the calculation
    another 2 stored procedure is used for generate the graph and both of them required to take 2 parameters. The 1st stored procedure will require 1 parameter (E.G. Reference Code) and will return a set of information including the data that could be use on the other 2 stored procedures.
    After I added these 2 stored procedure, it requires me to pass 3 parameters to the report. I would like to know if I could only pass the Reference Code for stored procedure 1 and use it to retrieve the information for the other 2 parameter?
    Thanks in advance
    Chi

    Hi Chi
    To pass parameter from 1 stored procedure to another stored procedure, you will have to create sub report. In your case you will have to create 2 sub reports for 2nd and 3rd stored procedure and link those sub reports with the main report using Reference Code field in order to pass the values.
    After creating the report when you will refresh the report, it will ask 4 parameters, one parameter for main report, one for the first subreport and two for second subreport to fetch the data correctly.
    Regards
    Poonam Thorat.

  • How can I pass parameter from report to form?

    Hi :)
    Now I try to build conference room like this by using form
    and report. And i design that when users click at group report
    then i'll show page that contain questions report and add
    question form. And question form and report must receive the
    same parameter from group report.
    First Problem: is I don't know how group report send the
    same parameter to question report and add question report at the
    same time. And is it possible??? If not please suggest me what
    should I do???
    Second Problem: is I don't know how can I pass parameter from
    report to form. I don't know the way to do it.
    Please tell me!!! Please...
    I look forward to hearing from all of you.
    Thank You.

    One way is to create a link based on that form and attach that
    link with the report. Through links you can pass parameters

  • How to   Pass Parameter from BIP  to Dashboard  Report

    Hi,
    Parameter from BIP to Dashboard Report
    If I select BIP report paremeter should pass value to dashboard report
    thanks in advance.
    CHEERS ,
    Jel

    Hi Saichand,
    I hav gone through above link its passing values from Dashboard prompt to BIP report only..
    just i need like reverse (if i click on BIP report value then it should pass that value to Dashboard reports) in this this case how to pass parameter from BIP to dashboard report
    Thanks in advance
    Cheers,
    Jel

Maybe you are looking for