Passing Parameter to sub report from detail section of Main report

I am new to CR
I am developing a CR for Clinical Lab Test. My main report have four field i.e
1. Test Code
2. Test Name
3. Result Value
4. Normal Values
This report has sub report in Page Footer. When TestCode = 18 or 19 It has to show a normal value table in Page footer of that page. Other wise this table should not appear on page footer.
Please help me

Hi Qasim,
Go in Section Expert and select the page footer. You will find Suppress in right side of the window, go in formula editor and give the follwoing formula :
If Testcode<> 18 or Testcode <> 19 Then true
Thanks,
Sastry
Edited by: Sastry Duvvuri on Oct 14, 2008 7:10 PM

Similar Messages

Passing Multivalued parameter to sub report in SSRS

Hi Team,
I tried passing multi valued parameter to sub report in SSRS but the report is blank.
Rgds,
Shree

Hi Shree,
As per my understanding, the issue is caused by the multiple-value parameters are not passed from the main report to the subreport correctly. Please refer to the steps below to check whether you configure the subreport parameter settings correctly:
Drag a Subreport control from toolbox to design surface.
Right-click the Subreport to open the Subreport Properties dialog box, then select the correct report as subreport.
Click Parameters in the left pane.
Add parameters as below (Parameter1 is a single-value parameter, Parameter2 is a multi-value parameter in subreport ):
Name: Parameter1 Value: [@ReportParameter1]
Name: Parameter2 Value: =Split(join(Parameters!ReportParameter2.Value,","),",")
Please also directly select or type the same values in subreport to check whether the subreport works well with those parameter values.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Pass parameter to ssrs report in performance point webpart from textbox text

How to pass parameter to ssrs report in performance point webpart from textbox text
Please help me to solve this ...
Bikky Kumar

Edit your SharePoint page and add new text filter web part.
Then pass the text filter value to your performance point report using connections. Your report should include at least one parameter to get the value. More over you can set default value in text filter.

Looking for a way to pass parameter to external list from infopath

Hey, i have a Sharepoint 2010 list for which I want to create Infopath form. I have an external content type and external list based on it.
I want to prepopulate some fields in my Sharepoint list with data from external list. I tried to use external list as a secondary data source and query it for needed values. The issue I encounter is that my ECT has a finder with filter and I can't figure
out how to pass a value to this filter within infopath.
How can it be done with infopath? How can I pass the filter value to the external list using Infopath?

Hi,
According to your post, my understanding is that you wanted to pass parameter to external list from infopath.
You need to query the external list from InfoPath using coding and CAML Query.
Here is a similar thread for your reference:
http://sharepoint.stackexchange.com/questions/33575/filtering-sharepoint-external-list-bcs-from-infopath
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

Passing database command parameter to sub-report

I'm trying to pass a runtime parameter from a main report to a database command parameter in a sub-report, and having some trouble.
My main report has parameter fields (Vendor, Manufacturer, etc) that the user selects at runtime - the result set includes Item Code - that part is working fine. Where I'm having trouble is with linking to the sub-report. My sub-report has a stored command that takes a parameter (ItemCode) and counts the number of times it's shown up on an invoice. When I created the command, it asked for a value for the parameter, and won't accept a blank entry. Now, whenever I try to run the main report, it asks for the ItemCode parameter for the sub-report - which kind of defeats the purpose. I've tried linking from ?Pm-OITM.ItemCode in the main report, but the Subreport Links window doesn't show the Command parameter to link to.
How do I take a field from the main report and pass it to a sub-report to be used as a parameter in a stored database command?
I'm running CR 2008, and SAP B1 2007 PL 42 on MS SQL 2005, and I'm still pretty new at CR, so details help.
Thanks.

Go to change subreport links and add Item Code from main report and then you can see the sureport stored procedure parameter in the Subreport parameters list, select the parameter and do not select any field from subreport.
You will be able to see the stored procedure parameter in the list only when the Item Code and the parameter are of same data type.
Regards,
Raghavendra

Passing parameters to sub report's stored procedure

I'm attempting to pass values from the main report to a linked sub report's stored procedure, but I haven't been successful yet.
I know how to filter the parameters on the return set of the stored procedure, using parameters from the main report. However, I would like the stored procedure executed for each record of the main report, using those values passed.

I was getting "missing parameter values" trying to send parameters to a stored procedure in the subreport. Turns out there is a hot fix for my issue. Not sure if it matches what you're trying to do; you need to give more information on what you've already tried.
I was using CR XI, and also CR for VS 2005. The problem seems to be fixed with CR VS2005 SP1, for Visual Studio CR.
Look up under Business Objects Downloads: Crystal Reports > .NET > Hot Fixes
Files:
CRRedist2005_x86.msi
crvs05sp1.exe
Then open the report again, and re-save it.
This has fixed the problem for me.
Good luck!

Passing Paramters to sub-report

I need some help with parameters between reports. I have a master report and a sub-report which is linked to a stored procedure. The stored procedure used in the sub-report has input parameters defined.
I have a master report which has a two level dynamic prompt. When one of three companies are selected, the dynamic list of states available for that company is displayed. I then want to assign the selected list of states to the parameter in the sub-report. I have created a shared variable and joined the master reports parameter values into the variable. In the master the resulting string looks like what I want in the sub-report stored procedure, for example ('WA', 'OR'). However, when I run the report the stored procedure input parameter appears to have no values assigned.
Is there some way to assign the default for the sub-report store procedure parameter to a value from the master report?
Thanks

Sorry, but I am still missing something. I have a formula which builds the string.
Shared stringVar vStates;
vStates := JOIN({?pCompany - CIS_DIVISION},",");
vStates := "'" + vStates + "'";
vStates := REPLACE (vStates, ",","','");
vStates;
When shown on the report the output is what I want, 'WA','OR'. But when linked to the SP parameter, no data is returned when more than one state is selected. Again, when a single value is selected, it works fine.
The input parameter is defined as varchar2 in the SP.

Parameter in sub report

Hi,
How can I transfer data from sub-report to the main report with the parameter. For example, Total field in sub report should be transferred to Total1 in the main report
Thanks,
Olga

You may check these threads:
Accessing Shared variables of sub-report in main report.
Re: crystal reports - how to call required sub report into main report
Thanks,
Gordon

Most urgent:::: passing parameter list to reports containing record groups

hi
can any one help me , i am getting frm-41214 when i pass a paramter list containing record group as data parameter to run_report_object as parameter, calling report from forms 10g, but when i dont pass the parameter list the report runs displaying no data(as it should do), otherwise it dont run and display the frm-41214
zulfiqar

Hi!
To suppress Oracle Reports native Parameter Form just add:
add_parameter( pl_id, 'pARAMform', text_parameter, 'NO' );
Andrew Velichko
Brainbench MVP for Oracle Developer 2000 http://www.brainbench.com
null

Help Needed in passing parameter to cryst report

Hello everyone, I am trying to create a report for a single record and as such am trying to pass parameters to a crystal report but I am not sure exactly how to do this. This is my own method that I am employeeing. I do not want to create a data table and put all the info I need in there and then base a report off of it. I do not want to deal with loops and arrays right now. I just want to pass for example parameter JuvenileID = 1 to my crystal report, then create a command under the database expert and set the parameter for my command to the parameter I passed my crystal report. How would I go about in doing this? I am using VS 2010 C#. This is a windows application. I have a dataentry form that is already populated with the info needed for the report. I just need to pass all the controls.text values to the report and populate it that way.

I'm not sure if I fully understand the issue, but since you have all the data you need in a data entry form that is already populated, why don't you simple create an ADO .NET Dataset and pass that to the report? Much easier to implement, faster execution with the small amount of data you have and less code.
Dataset sample app is here:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
More info on datasets is here:
[1511438 - How to use datasets to pass data to crystal reports|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533313331333433333338%7D.do].
- Ludek

Passing Parameter to Crystal Report

Hi Experts,
I have created and designed a Report in Crystal Report 2005. I am displaying the report in SAP B1 using Win Form . Here I want to pass 2 parameters to Report ---@FromDate and @ToDate . I have coded to pass these two parameters this way :
Dim RptDoc As New ReportDocument
        Dim ParamValue As String = String.Empty
        Dim crtableLogoninfos As New CrystalDecisions.Shared.TableLogOnInfos
        Dim crtableLogoninfo As New CrystalDecisions.Shared.TableLogOnInfo
        Dim crConnectionInfo As New CrystalDecisions.Shared.ConnectionInfo
        Dim CrTables As CrystalDecisions.CrystalReports.Engine.Tables
        Dim CrTable As CrystalDecisions.CrystalReports.Engine.Table
        Try
            RptDoc.Load(Application.StartupPath() & "\" & ReportName & ".rpt")
            RptDoc.SetParameterValue("@FromDate", "01/01/2008")
            RptDoc.SetParameterValue("@ToDate", "12/31/2008")
            Dim oForm_ReportViewer As Frm_ReportViewer = New Frm_ReportViewer()
            oForm_ReportViewer.CRViewer.ReportSource = RptDoc
            With crConnectionInfo
                .ServerName = oCompany.Server '"(local)"
                .DatabaseName = oCompany.CompanyDB '"SBODemoIn"
                .UserID = oCompany.DbUserName
                .Password = "manager@123" 'oCompany.DbPassword
             End With
             CrTables = RptDoc.Database.Tables
            'Loop through each table in the report and apply the
            'LogonInfo information
            For Each CrTable In CrTables
                crtableLogoninfo = CrTable.LogOnInfo
                crtableLogoninfo.ConnectionInfo = crConnectionInfo
                CrTable.ApplyLogOnInfo(crtableLogoninfo)
            Next
           oForm_ReportViewer.Text = frmTitle
            oForm_ReportViewer.WindowState = FormWindowState.Maximized
            oForm_ReportViewer.ShowDialog()
        Catch Ex As Exception
            MessageBox.Show(Ex.ToString)
        End Try
But When I view the report in B1 , it throws an Exception "Report or Procedure expects parameter @FromDate which is not    supplied. "
Please help me where I am making mistake , what could be the cause of this exception..
Thanks and Regards,
Pooja Singh.

Hi Pooja Singh,
You have only set Dim ParamValue As String = String.Empty. Where are two parameter @FromDate and @ToDate?
SetParameterValue will only work if you have defined the parameters already and the parameters have the right format.
You may check this thread:
Re: Crystal report open instead of PLD with same form reference.
Thanks,
Gordon

How to pass parameter to a report for Operator 'LIKE'

I need to pass a parameter to a report for "LIKE" operator. the parameter for "equal to or is in" operator is 'eq':
'https://secure-ausomxfts.crmondemand.com/OnDemand/user/analytics/saw.dll?Go&Path=/shared/Company_AFTA-D78SR_Shared_Folder/Work Order Asset Lookup&Options=r&Action=Navigate&P0=2&P1=eq&P2=Account.TEXT_61&P3=&p4=
What would 'p1' value for 'LIKE' operator?
Thanks

Hi, Hope the below helps
neq - Not equal to or not in
lt - Less than
gt - Greater than
ge - Greater than or equal to
le - Less than or equal to
bwith - Begins with
ewith - Ends with
cany - Contains any (of the values in &P3)
call - Contains all (of the values in &P3)
like - Is like (Type %25 rather than the % wildcard)
top - In the top n (&P3 contains 1+n, where n is the number of top items)
bottom - In the bottom n (&P3 contains 1+n, where n is the number of bottom
items)
bet - Between (&P3 must have two values)
null - Is null (&P3 must be 0 or omitted)
nnul - Is not null (&P3 must be 0 or omitted)
Venky CRMIT

Eliminate top and bottom 20% records from detail section.

Post Author: optikconnex
CA Forum: Crystal Reports
I have two groups, Group1 is by PartNum and Group2 is by WorkCenter. I also have 1 detail section. I want to only show/select the middle 60% of records, or to reword that I want to eliminate the top 20% and bottom 20% of the detail records. How do I do this? I have tried using the Nth Largest and Nth Smallest and even Pth Percentile functions but I just don't seem to know how to use them correctly since I need this done at the detail level and not group level.
Thanks

Post Author: kcheeb
CA Forum: Crystal Reports
You could try hiding the records based on your formula but I suspect that'll throw your group totals off.
You might be best off using SQL to do that for you. Most of the major databases have Datamart type functions you can use.

Pass parameter to a report link

HI,
This is what I am trying to do:
I want to create a report with 2 parameters - FromDate and ToDate.
The report link will be something like this - http://xyx.com/report1FromDate=1jan2012&ToDate=31jan2012
What I want is the users to change the date range in this URL and the report should automatically filter out the date selected. Is this possible? Has anyone does this before?
So when the user runs this report and wants to run for some other date, they will just modify the URL and the report will run for Feb as an example shown below:
http://xyx.com/report1FromDate=1feb2012&ToDate=29Feb2012
Edited by: 920645 on Mar 21, 2012 11:21 AM

It's not what you're doing wrong, but there is more right you can do.
In the Report, on the Customization Form Display Options Tab, make sure "Make Public" is checked for your Bind Parameter (:CNTRYLOC).
In the Page Properties, on the Parameters Tab, Add a Page parameter for CNTRYLOC. (I usually use the same name for the Page Parameter as the Report's Bind Parm. Warning: These parameters are CASE-SENSITIVE in places.)
Still on the Page Properties Parameters Tab, Expand the list of Portlets at the bottom and map your Portlet Parameter to the Page parameter you just made.
Hope that helps!

Problem passing parameter to crystal report subreport from *.aspx page

Background:
I am developing a .NET web application using Visual Studio 2005. The code behind is in VB.net. One of my asp.net pages calls a report, which is invoked when the user clicks a Print button. I have developed this report using the Crystal Reports software that is bundled with Visual Studio 2005. I am passing one parameter from the asp.net page (utilizing the VB.net code-behind on the Print button) to the Crystal report. The report consists of a main report and 5 subreports. Both the main report and the subreports use the same parameter. Both the main report and the subreports are bound to stored procedures, each of which require a parameter.
Problem:
For some reason, the parameter is not being passed from the asp.net page to the report. I am receiving the following error: "CrystalDecisions.CrystalReports.Engine.ParameterField.CurrentValueException: Missing Parameter Values." However, when I remove the subreports, the parameter gets passed, and the report is invoked with no problem.
I have read in other forums that there may be an issue with the Crystal Reports software that is causing this problem. I have downloaded and run the suggested hotfix, but the problem remains unresolved. I have tried changing the linking of my main report to the subreport, but that doesn't help either. It is possible that I am doing something wrong with the linking, as this is the first time I have developed a report with Crystal Reports. I need a workaround or definitive solution. Below is the aspx code used to call the report:
Imports System
Imports System.Collections.Specialized
Imports System.Collections.ObjectModel
Imports System.Collections
Imports System.Text
Imports System.Configuration
Imports System.Data.SqlClient
Imports System.Data
Imports System.Data.SqlClient.SqlDataAdapter
Imports System.Web.Configuration
Imports Crystaldecisions.crystalreports.engine
Imports Crystaldecisions.reportsource
Imports Crystaldecisions.shared
Partial Class OACIS_Award_or_Deny_BudgetSummary_PrintRpt
Inherits System.Web.UI.Page
Dim paramFields As ParameterFieldDefinitions
Dim paramField As ParameterFieldDefinition
Dim paramValue As ParameterValues
Dim paramDiscreteValue As New ParameterDiscreteValue
Public Shared idCase, nameRpt As String
Private PrintRpt As ReportDocument
Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Try
idCase = Request.QueryString("id")
nameRpt = Request.QueryString("prtName")
Dim config As Configuration = WebConfigurationManager.OpenWebConfiguration("~/")
Dim settings As AppSettingsSection = DirectCast(config.GetSection("appSettings"), AppSettingsSection)
Dim file As String = settings.File
Dim dSource, iCatalog, userIs, passUser, appString As String
dSource = Nothing
iCatalog = Nothing
userIs = Nothing
passUser = Nothing
appString = config.ConnectionStrings.ConnectionStrings("OacisConn").ToString()
Dim AppArray() As String = Split(appString, ";")
Dim arrayLgth As Integer = AppArray.Length
Dim i As Integer
For i = 0 To arrayLgth - 1
Dim pairIs() As String = Split(AppArray(i), "=")
Dim firstItem As String = pairIs(0)
Dim secondItem As String = pairIs(1)
If firstItem = "Data Source" Then : dSource = secondItem : End If
If firstItem = "Initial Catalog" Then : iCatalog = secondItem : End If
If firstItem = "UID" Then : userIs = secondItem : End If
If firstItem = "PWD" Then : passUser = secondItem : End If
Next
Dim crReportDocument As ReportDocument
Dim crExportOptions As ExportOptions
Dim crDiskFileDestinationOptions As DiskFileDestinationOptions
Dim crconnectioninfo As ConnectionInfo
Dim crDatabase As Database
Dim crtables As Tables
Dim crtable As Table
Dim crtablelogoninfo As TableLogOnInfo
Dim Fname As String
Dim Prtname As String
Dim FPath As String
Dim crSection As Section
Dim crReportObject As ReportObject
Dim crSubreportObject As SubreportObject
Dim subRepDoc As New ReportDocument
FPath = Server.MapPath("") + "\"
Dim rptIs As String = nameRpt
crReportDocument = New ReportDocument
Prtname = FPath
Prtname = Prtname + rptIs
crReportDocument.Load(Prtname)
Fname = "C:\WINDOWS\TEMP\" & Session.SessionID.ToString & ".pdf"
crconnectioninfo = New ConnectionInfo
crconnectioninfo.ServerName = dSource
crconnectioninfo.DatabaseName = iCatalog
crconnectioninfo.UserID = userIs
crconnectioninfo.Password = passUser
crDatabase = crReportDocument.Database
crtables = crDatabase.Tables
For Each crtable In crtables
Try
crtablelogoninfo = crtable.LogOnInfo
crtablelogoninfo.ConnectionInfo = crconnectioninfo
crtable.ApplyLogOnInfo(crtablelogoninfo)
crtable.SetDataSource(Prtname)
crtablelogoninfo.ConnectionInfo.DatabaseName = iCatalog
crtablelogoninfo.ConnectionInfo.UserID = userIs
crtablelogoninfo.ConnectionInfo.Password = passUser
crtable.ApplyLogOnInfo(crtablelogoninfo)
crtable.Location = iCatalog + ".dbo." + crtable.Name
Catch ex As Exception
Response.Write(ex)
Exit Sub
End Try
Next crtable
For Each crSection In crReportDocument.ReportDefinition.Sections
For Each crReportObject In crSection.ReportObjects
If crReportObject.Kind = ReportObjectKind.SubreportObject Then
crSubreportObject = CType(crReportObject, SubreportObject)
subRepDoc = crSubreportObject.OpenSubreport(crSubreportObject.SubreportName)
For Each crtable In subRepDoc.Database.Tables
Try
crtablelogoninfo = crtable.LogOnInfo
crtablelogoninfo.ConnectionInfo = crconnectioninfo
crtable.ApplyLogOnInfo(crtablelogoninfo)
crtable.SetDataSource(Prtname)
crtablelogoninfo.ConnectionInfo.DatabaseName = iCatalog
crtablelogoninfo.ConnectionInfo.UserID = userIs
crtablelogoninfo.ConnectionInfo.Password = passUser
crtable.ApplyLogOnInfo(crtablelogoninfo)
crtable.Location = iCatalog + ".dbo." + crtable.Name
Catch ex As Exception
End Try
Next
End If
Next
Next
crDiskFileDestinationOptions = New DiskFileDestinationOptions()
crDiskFileDestinationOptions.DiskFileName = Fname
crExportOptions = crReportDocument.ExportOptions
With crExportOptions
.DestinationOptions = crDiskFileDestinationOptions
.ExportDestinationType = ExportDestinationType.DiskFile
.ExportFormatType = ExportFormatType.PortableDocFormat
End With
Dim parIDCase As ParameterValues = New ParameterValues
Dim disIDCase As ParameterDiscreteValue = New ParameterDiscreteValue
disIDCase.Value = idCase
parIDCase.Add(disIDCase)
crReportDocument.DataDefinition.ParameterFields("@ID_CASE_NMBR").ApplyCurrentValues(parIDCase)
crReportDocument.Export()
Response.ClearContent()
Response.ClearHeaders()
Response.ContentType = "application/pdf"
Response.WriteFile(Fname)
Response.Flush()
Response.Close()
System.IO.File.Delete(Fname)
Catch ex As Exception
lblMessage.Visible = True
lblMessage.Text = "Error Load
" & Convert.ToString(ex)
End Try
End Sub
End Class
Your help is greatly appreciated!

Thanks for your help!
I've now gotten past the "missing parameter values" error, and the report renders fine in the report viewer. However, I've encounted another problem. The data in my main report displays correctly, but the data in my subreport does not display. Of course, when I view the report in the designer, both the main report and subreport display correctly. What am I doing wrong? Below is my vb.net code:
        Try
            idCase = Request.QueryString("id")
            nameRpt = Request.QueryString("prtName")
            Dim config As Configuration = WebConfigurationManager.OpenWebConfiguration("~/")
            Dim settings As AppSettingsSection = DirectCast(config.GetSection("appSettings"), AppSettingsSection)
            Dim file As String = settings.File
            Dim dSource, iCatalog, userIs, passUser, appString As String
            dSource = Nothing
            iCatalog = Nothing
            userIs = Nothing
            passUser = Nothing
            appString = config.ConnectionStrings.ConnectionStrings("OacisConn").ToString()
            Dim AppArray() As String = Split(appString, ";")
            Dim arrayLgth As Integer = AppArray.Length
            Dim i As Integer
            For i = 0 To arrayLgth - 1
                Dim pairIs() As String = Split(AppArray(i), "=")
                Dim firstItem As String = pairIs(0)
                Dim secondItem As String = pairIs(1)
                If firstItem = "Data Source" Then : dSource = secondItem : End If
                If firstItem = "Initial Catalog" Then : iCatalog = secondItem : End If
                If firstItem = "UID" Then : userIs = secondItem : End If
                If firstItem = "PWD" Then : passUser = secondItem : End If
            Next
            Dim crReportDocument As ReportDocument
            Dim crExportOptions As ExportOptions
            Dim crDiskFileDestinationOptions As DiskFileDestinationOptions
            Dim crconnectioninfo As ConnectionInfo
            Dim crDatabase As Database
            Dim crtables As Tables
            Dim crtable As Table
            Dim crtablelogoninfo As TableLogOnInfo
            Dim Fname As String
            Dim Prtname As String
            Dim FPath As String
            Dim crSection As Section
            Dim crReportObject As ReportObject
            Dim crSubreportObject As SubreportObject
            Dim subRepDoc As New ReportDocument
            FPath = Server.MapPath("") + "\"
            Dim rptIs As String = nameRpt
            crReportDocument = New ReportDocument
            Prtname = FPath
            Prtname = Prtname + rptIs
            crReportDocument.Load(Prtname)
            Fname = "C:\WINDOWS\TEMP\" & Session.SessionID.ToString & ".pdf"
            crconnectioninfo = New ConnectionInfo
            crconnectioninfo.ServerName = dSource
            crconnectioninfo.DatabaseName = iCatalog
            crconnectioninfo.UserID = userIs
            crconnectioninfo.Password = passUser
            crDatabase = crReportDocument.Database
            crtables = crDatabase.Tables
            For Each crtable In crtables
                Try
                    crtablelogoninfo = crtable.LogOnInfo
                    crtablelogoninfo.ConnectionInfo = crconnectioninfo
                    crtable.ApplyLogOnInfo(crtablelogoninfo)
                    crtable.SetDataSource(Prtname)
                    crtablelogoninfo.ConnectionInfo.DatabaseName = iCatalog
                    crtablelogoninfo.ConnectionInfo.UserID = userIs
                    crtablelogoninfo.ConnectionInfo.Password = passUser
                    crtable.ApplyLogOnInfo(crtablelogoninfo)
                    crtable.Location = iCatalog + ".dbo." + crtable.Name
                Catch ex As Exception
                    Response.Write(ex)
                    Exit Sub
                End Try
            Next crtable
            For Each crSection In crReportDocument.ReportDefinition.Sections
                For Each crReportObject In crSection.ReportObjects
                    If crReportObject.Kind = ReportObjectKind.SubreportObject Then
                        crSubreportObject = CType(crReportObject, SubreportObject)
                        subRepDoc = crSubreportObject.OpenSubreport(crSubreportObject.SubreportName)
                        For Each crtable In subRepDoc.Database.Tables
                            Try
                                crtablelogoninfo = crtable.LogOnInfo
                                crtablelogoninfo.ConnectionInfo = crconnectioninfo
                                crtable.ApplyLogOnInfo(crtablelogoninfo)
                                crtable.SetDataSource(Prtname)
                                crtablelogoninfo.ConnectionInfo.DatabaseName = iCatalog
                                crtablelogoninfo.ConnectionInfo.UserID = userIs
                                crtablelogoninfo.ConnectionInfo.Password = passUser
                                crtable.ApplyLogOnInfo(crtablelogoninfo)
                                crtable.Location = iCatalog + ".dbo." + crtable.Name
                            Catch ex As Exception
                            End Try
                        Next
                    End If
                Next
            Next
            crDiskFileDestinationOptions = New DiskFileDestinationOptions()
            crDiskFileDestinationOptions.DiskFileName = Fname
            crExportOptions = crReportDocument.ExportOptions
            With crExportOptions
                .DestinationOptions = crDiskFileDestinationOptions
                .ExportDestinationType = ExportDestinationType.DiskFile
                .ExportFormatType = ExportFormatType.PortableDocFormat
            End With
            crReportDocument.SetParameterValue("@ID_CASE_NMBR", idCase)
            crReportDocument.SetParameterValue("@ID_CASE_NMBR", idCase, "MemberName")
            crReportDocument.Export()
            Response.ClearContent()
            Response.ClearHeaders()
            Response.ContentType = "application/pdf"
            Response.WriteFile(Fname)
            Response.Flush()
            Response.Close()
            System.IO.File.Delete(Fname)
        Catch ex As Exception
            lblMessage.Visible = True
            lblMessage.Text = "Error Load<br>" & Convert.ToString(ex)
        End Try
Edited by: LaShandra Knox on Sep 17, 2008 7:59 PM

Passing Parameter to sub report from detail section of Main report

Similar Messages

Maybe you are looking for