Passing Parameters between Portal and Forms 6i
Hi,I'm new in Oracle Portal and I have a problem. I have a Portal's report and I need to pass a value from this report to Form 6i to perform the query. This form is a porlet including in the Portal page.
please help me
Hi, Im trying to do that you said, but doesn't work :-(, my code is something like this, in the portlet.xml(jboss portal 2.6) :
<portlet-preferences>
<preference>
<name>stockSymbols</name>
<value>BEAS</value>
</preference>
<preference>
<name>refreshInterval</name>
<value>600</value>
</preference>
</portlet-preferences>
in the consumer(bea wlp 8.1 sp5), i dont see any portlet preference in the palette window, im doing something wrong?...thanks for your help.
Similar Messages
-
Hello All,
I am working with the following example (from previous postings on this
board) that demonstrates how to run a sub vi in parallel with the main
vi. I'd like to pass parameters between the main and sub such as
the control (delay) and indicator (value) parameters of my subvi
example. Does any one know how to do this? Parallel
execution is important for me, I cannot just paste the subvi icon into
my main diagram (two nested while loops...)
Many thanks,
Luis
Message Edited by cascao on 08-16-2005 08:42 PM
Message Edited by cascao on 08-16-2005 08:42 PM
Attachments:
VI_Server_technique.vi 32 KB
SubVI_1.vi 19 KBcascao wrote:
Hello All,
I am working with the following example (from previous postings on this
board) that demonstrates how to run a sub vi in parallel with the main
vi. I'd like to pass parameters between the main and sub such as
the control (delay) and indicator (value) parameters of my subvi
example. Does any one know how to do this? Parallel
execution is important for me, I cannot just paste the subvi icon into
my main diagram (two nested while loops...)
Many thanks,
Luis
Luis, you can use the VI Server methods 'Set Control Value' and 'Get Control Value', as demonstrated in the attached examples.
-Franz
Attachments:
VI Server.zip 26 KB -
Passing parameters between WDA and Iview URL.
Hi,
I've a Iview type URL and I want to passing parameters through of code of my WDA. I Know to call a Iview for code but I don't know passing parameters. I used this method for call the iview:
CALL METHOD l_portal_manager->navigate_absolute
EXPORTING
navigation_target = path
navigation_mode = if_wd_portal_integration=>co_show_external.
(path = roles//....idiview).
Thanks.Look at this thread..
Re: Get URL Parameter Starting With underscore '_' (_sapwiid)
<i>*Reward each useful answer</i>
Raja T -
Passing parameters between JSP and Servlet
The scenario is as follows:
There is a JSP page that sends a string as a hidden parameter to a servlet:
<input type="hidden" name=<%= Book.NAME %> value=<%= book.getName() %> >
In the servlet there is a print statement that checks the parameter value:
System.out.println("Book name: "+request.getParameter(Book.NAME));
The problem is as follows: if the name of the book consists of more than one word
such as "Servlets and JSP", the print statement will print only Servlet.
If the JSP page passes a string directly as shown here:
<input type="hidden" name="Test" value="Test String" >
The servlet will print the complete string: Test String
The same problem appears if the string is passed between two JSP pages.
Any help is greatly appreciated.
Regards,
Basil MahdiYou might want to try
<input type="hidden" name="<%= Book.NAME %>" value="<%=URLEncode.encode(book.getName(), "UTF-8")%>" >This will take care of any wierd un-url friendly charcters that might appear in the book titles such as the ' or " which may be the problem. -
Passing parameters between server and client side
Dear All
I writing a server-side web service and using wsdl to expose its methods for a 'client' to use.
However, i need to make sre the clients creates a soap header? How can i tell the client it must create a soap header?
Also can someone tel me how i pass a value from the server-side to the client-side and also get a vlue from the client soap message
Many thanksIn your wsdl you would have the header as part of the input for example, see the operation below:
<wsdl:operation name="foo">
<soap:operation soapAction="http://www.foobar.com/foo" style="document"/>
<wsdl:input>
<soap:body use="literal"/>
<soap:header message="tns:FooSoapHeader" part="MySoapHeader" use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation> -
Trying to pass parameters between GUI classes and methods
Hi All.
I have been working on a rather large final year project in college and it is getting close to the deadline. It looks as though I need to "tidy up" my code as it contains too many static methods, variables and other bad programming habits. My package consists of many different GUI's and classes. Up until now I have been calling different GUI's with guiName.NameOfMethod. I have been told this is bad practice so I am trying to fix this. Also instead of passing parameters correctly I have been creating static variables in my main class and using them. So for example if one class needed to pass a variable to the other I would first myGlobalVariable = X; in the first class. And then the second class can use this. This is also bad, right?
So I guess im really just looking for a good example or tutorial on how to pass parameters between classes and methods, GUI if possible. Here is an example of how my GUI classes look:
public class anotherGUI extends JFrame implements ActionListener {
private JTextField a, b, c;
private JButton button1, button2;
JPanel p, p1;
public anotherGUI() {
LayOutAnotherGUI();
setLocationRelativeTo(DnDMain.pictureArray[a]);
setTitle("Example");
setVisible(true);
pack();
private void LayOutAnotherGUI(int c) {
//GUI is layed out here
public void actionPerformed(ActionEvent e) {
Object source = e.getSource();
if (source == submit)
clickOK();
public void clickOK(){
//Here is where I have been accessing and modifying static global variables. (But this needs to change).
public void showanotherGUI() {
new anotherGUI();
}This is more or less how I have been going about creating my GUI's. These are used as pop ups. The user enters a value and then it is closed.
To be honest I have been able to pass a variable correctly from one class to a GUI class but I have still having difficulty. For example in my code above I can pass the variable into this class but I cannot pass it into clickOK(). An this is where it is needed.
Can anyone please help?
I hope I have explained my problem well.
Thanks in advance.I dont think that is what I need. An example of what I do in my program is:
I have a main GUI with an array of images. There are a number of other small GUI's that appear for certain functions when the user clicks on an image or does some other function. I am trying to pass a value into the GUI class that is used for the smaller "pop up" GUI. So lets say the user has clicked the image in array[12]. Then a GUI is displayed. I need to pass the integer 12 into this class.
Thanks. -
How to pass Parameters between two forms
im trying to do this but i could not find any way for this.
can any one help me how can i pass parameters between two forms
in forms4.5. any help will be appreciated
thanks.
nullGlobal variables can be used, but you can do what the online help
says ...
Parameters are passed to called forms by means of a parameter
list. A parameter list is a named programmatic construct that is
simply a list of parameter names (called keys) and their values.
You can pass parameter values to forms invoked by the built-in
subprograms CALL_FORM, OPEN_FORM, and NEW_FORM. In addition, you
can pass parameter values to other Oracle tools with the
RUN_PRODUCT procedure.
A parameter you include in a parameter list can be either a text
parameter or a data parameter. The parameter type determines how
its value is interpreted.
Text Parameters The value of a text parameter being passed to a
called product is a CHAR string that can represent the following:
n a user-defined form parameter defined in a form invoked
by the CALL_FORM, OPEN_FORM, or NEW_FORM built-in subprograms
n a command line or user-defined parameter for a product
invoked with the RUN_PRODUCT built-in subprogram
Data Parameters The value of a data parameter being passed to a
called product is always the name of a record group defined in
the current form. (A record group is a data structure that
stores records derived from a query or through programmatic
assignment.) Data parameters are used to pass data to products
invoked with the RUN_PRODUCT built-in subprogram. You cannot
pass data parameters to forms.
The following table shows the structure of a parameter list that
contains four parameters:
Key Paramtype Value
CITY Text_Parameter 'BOGOTA'
CATEGORY Text_Parameter 'EXPORTS'
MULTIPLIER Text_Parameter '.0275'
NEW_DATA Data_Parameter 'RECORD_GROUP8'
arun reddy (guest) wrote:
: im trying to do this but i could not find any way for this.
: can any one help me how can i pass parameters between two forms
: in forms4.5. any help will be appreciated
: thanks.
null -
Passing parameters between views in different Web Dynpro applications
Hi everyone,
I would like to pass the value of one parameter between one view in a webdynpro application and another view that is in other webdynpro application. How can I do this in a secure way?Hi,
Check below links for passing parameters between two applications:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b083f76a-708c-2b10-559b-e07c36dc5440
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/91b6ad90-0201-0010-efa3-9626d2685b6e
Re: Pass parameters via POST in WDPortalNavigation.navigateAbsolute method
Regards,
Anagha -
How to pass parameters between two xterm windows?
Hi,
I would like to know how to pass parameters between two xterm windows where there are two independence processes running on them respectively ? Would appreciate if any one out there can advise me . Thanks.Global variables can be used, but you can do what the online help
says ...
Parameters are passed to called forms by means of a parameter
list. A parameter list is a named programmatic construct that is
simply a list of parameter names (called keys) and their values.
You can pass parameter values to forms invoked by the built-in
subprograms CALL_FORM, OPEN_FORM, and NEW_FORM. In addition, you
can pass parameter values to other Oracle tools with the
RUN_PRODUCT procedure.
A parameter you include in a parameter list can be either a text
parameter or a data parameter. The parameter type determines how
its value is interpreted.
Text Parameters The value of a text parameter being passed to a
called product is a CHAR string that can represent the following:
n a user-defined form parameter defined in a form invoked
by the CALL_FORM, OPEN_FORM, or NEW_FORM built-in subprograms
n a command line or user-defined parameter for a product
invoked with the RUN_PRODUCT built-in subprogram
Data Parameters The value of a data parameter being passed to a
called product is always the name of a record group defined in
the current form. (A record group is a data structure that
stores records derived from a query or through programmatic
assignment.) Data parameters are used to pass data to products
invoked with the RUN_PRODUCT built-in subprogram. You cannot
pass data parameters to forms.
The following table shows the structure of a parameter list that
contains four parameters:
Key Paramtype Value
CITY Text_Parameter 'BOGOTA'
CATEGORY Text_Parameter 'EXPORTS'
MULTIPLIER Text_Parameter '.0275'
NEW_DATA Data_Parameter 'RECORD_GROUP8'
arun reddy (guest) wrote:
: im trying to do this but i could not find any way for this.
: can any one help me how can i pass parameters between two forms
: in forms4.5. any help will be appreciated
: thanks.
null -
OBIEE 11G - Issue passing parameters between two reports
Hi folks,
I am struggling to pass parameters between two reports in OBIEE 11G.
My first report contains the following columns: Rolling Year Type (VCHAR), Year(VCHAR), Month(VCHAR), Cost(Double).
My second report contains the following columns: Rolling Year Type(VCHAR), Year(VCHAR), Month(VCHAR), Category(VCHAR), Cost(Double).
My requirement is to pass the Rolling Year Type, Year and Month values from report 1 to report 2.
On the Month column properties of report 1, I have created an Action Link called 'Drill to Category'. I have clicked on 'Navigate to BI Content' and selected Report 2.
Then on Report 2, I have included three filters: Rolling Year Type is prompted, Year is prompted, Month is promted.
When I run the report I always get the following error:
The specified criteria didn't result in any data. This is often caused by applying filters and/or selections that are too restrictive or that contain incorrect values. Please check your Analysis Filters and try again. The filters currently being applied are shown below.
When I check the cursor cache, the filter values are correct. Does anybody have any idea why Report 2 does not display?
When I remove the Month filter, the report works correctly.
I have since changed the third filter to be Month No and although Report 2 does display, it does not pick up the filter on the Month No.
I initially thought this may have been a caching issue and so I have disabled BI Server Cache but this does not fix my problem.
This was never an issue on OBIEE 10G as I found it very easy to navigate between two requests.
Has anyone else experienced problems with passing parameters between two request in 11G?
Any help appreciated.
Thanks
GavinHi,
I once tried this kind of requirement(with dashboard prompts though) and hit at similar issue. I later found out that the problem is with the space in the parameter values. Can you please let me know, if the same is the case with you?
Suppose the parameter passed is "Jan 2010", but the report on the destination takes the value as "Jan" & "2010". Yes, it kind of split the parameter value to two based on space. I think we can notice the filters the destination report got, by enabling filter view.
In this case, since you pass only value at a time, could you try placing the parameter value anyway in double quotes? I think the Server then will understand it as one value.
Thank you,
Dhar -
Use context to pass value between JPF and Java Control
hi,
Can we use context to pass value between JPF and Java Control? It works if i m using InitialContext in the same machine but i dun think it will works if i put Web server and application server in different machine. Anyone have an idea how to do it?
I also want to get the method name in the onAcquire callback method. Anyone knows how to do this?
thks
?:|Hi.
Yoy can the next options for make this:
1. Pass your values in http request.
example: http://localhost/index.jsp?var1=value1&var2=value2&var3....
2. You can use a no visible frame (of height or width 0) and keep your variables and values there using Javascript, but of this form, single you will be able to check the values in the part client, not in the server. Of this form, the values of vars are not visible from the user in the navigation bar.
Greeting. -
Hi Sdn's and Nakisa tehnical experts,
We have a Portal environment 7.02 , a Nakisa environment 3.0 (CE) and and HR backend environment 701 (604).
We are busy setting up SSO between Portal and Nakisa via the, URL iview for the Org chart (http://<host>:<port>OrgChart/default.jsp).
We have done as indicated in wiki:
http://wiki.sdn.sap.com/wiki/display/ERPHCM/SAPSSOAuthenticationwithverify.pseusingSAPSSOEXT
We are however stil having issues with the SSO and in the cds.log the following is being displayed:
++01 Aug 2011 13:11:42 ERROR com.nakisa.Logger - com.mysap.sso.SSO2Ticket : Could not load library: sapsecu.dll - java.lang.Exception: MySapInitialize failed: rc= 14null++
++01 Aug 2011 13:11:42 ERROR com.nakisa.Logger - com.nakisa.framework.login.Credentials_SapSso : java.lang.Exception: MySapEvalLogonTicketEx failed: standard error= 9, ssf error= 0++
++01 Aug 2011 13:11:42 ERROR com.nakisa.Logger - com.nakisa.framework.login.Credentials_SapSso : Internal error (9) - No SSF error (0)++
Can someone indicate what I am doing wrong?
Regards DriesHi Luke,
thanks a lot for your help so far.
I have created a root/XML folder under the diretory, and the path is now as follows:
K:\usr\sap\NKP\J14\j2ee\cluster\apps\Nakisa\OrgChart\servlet_jsp\OrgChart\root\.system\Admin_Config\__000__Sasol_DEV_LIVE\.delta\root\XML
It seems like it finds the verify.pse, but not the library, sapsecu.dll.
My credentials.xml file is as follows:
<credentials>
<assembly name="SapSso"/>
<info>
<item name="PseFilePath">XML\verify.pse</item>
<item name="SsfLibFilePath">XML\sapsecu.dll</item>
<item name="PsePassword"></item>
<item name="WindowsPlatform">64</item>
<item name="TicketFile"></item>
<item name="Base64decode">true</item>
</info>
</credentials>
I however stilll get the following in the cds.log
15 Aug 2011 13:59:53 INFO com.nakisa.Logger - Tenant ID: 000
15 Aug 2011 13:59:55 INFO com.nakisa.Logger - LoginSettingsObject Load: 1719
15 Aug 2011 13:59:55 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : Credential provider SapSso
15 Aug 2011 13:59:55 INFO com.nakisa.Logger - com.nakisa.framework.login.Credentials_SapSso : Using cert: K:\usr\sap\NKP\J14\j2ee\cluster\apps\Nakisa\OrgChart\servlet_jsp\OrgChart\root\XML\verify.pse
15 Aug 2011 13:59:55 INFO com.nakisa.Logger - com.nakisa.framework.login.Credentials_SapSso : Ticket is: AjExMDAgAA9wb3J0YWw6eXNzZWxhZ2OIABNiYXNpY2F1dGhlbnRpY2F0aW9uAQAIWVNTRUxBR0MCAAMwMDADAANEUDkEAAwyMDExMDgxNTExNDcFAAQAAAAICgAIWVNTRUxBR0P%2FAQQwggEABgkqhkiG9w0BBwKggfIwge8CAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGBzzCBzAIBATAiMB0xDDAKBgNVBAMTA0RQOTENMAsGA1UECxMESjJFRQIBADAJBgUrDgMCGgUAoF0wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMTEwODE1MTE0NzIwWjAjBgkqhkiG9w0BCQQxFgQUK13ubzFiQrY4H%2FLRk2ysyvPSvccwCQYHKoZIzjgEAwQuMCwCFF1W9d!tAjLvP8dnb1bs4XghaHSBAhQ9kd9N!bJubUWITtkzU!za96lxNg%3D%3D
15 Aug 2011 13:59:55 INFO com.nakisa.Logger - com.nakisa.framework.login.Credentials_SapSso : Version of SAPSSOEXT: SAPSSOEXT 4
15 Aug 2011 13:59:55 INFO com.nakisa.Logger - com.nakisa.framework.login.Credentials_SapSso : SCUE LIB base path is:
15 Aug 2011 13:59:55 ERROR com.nakisa.Logger - com.mysap.sso.SSO2Ticket : Could not load library: sapsecu.dll - java.lang.Exception: MySapInitialize failed: rc= 14null
15 Aug 2011 13:59:55 ERROR com.nakisa.Logger - com.nakisa.framework.login.Credentials_SapSso : java.lang.Exception: MySapEvalLogonTicketEx failed: standard error= 9, ssf error= 0
15 Aug 2011 13:59:55 ERROR com.nakisa.Logger - com.nakisa.framework.login.Credentials_SapSso : Internal error (9) - No SSF error (0)
15 Aug 2011 13:59:55 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : User to authenticate null
15 Aug 2011 13:59:55 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : Authentication provider SapSso
15 Aug 2011 14:00:00 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : User authenticated null
15 Aug 2011 14:00:00 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : Authentication row is {SapSsoTicket=AjExMDAgAA9wb3J0YWw6eXNzZWxhZ2OIABNiYXNpY2F1dGhlbnRpY2F0aW9uAQAIWVNTRUxBR0MCAAMwMDADAANEUDkEAAwyMDExMDgxNTExNDcFAAQAAAAICgAIWVNTRUxBR0P%2FAQQwggEABgkqhkiG9w0BBwKggfIwge8CAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGBzzCBzAIBATAiMB0xDDAKBgNVBAMTA0RQOTENMAsGA1UECxMESjJFRQIBADAJBgUrDgMCGgUAoF0wGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAcBgkqhkiG9w0BCQUxDxcNMTEwODE1MTE0NzIwWjAjBgkqhkiG9w0BCQQxFgQUK13ubzFiQrY4H%2FLRk2ysyvPSvccwCQYHKoZIzjgEAwQuMCwCFF1W9d!tAjLvP8dnb1bs4XghaHSBAhQ9kd9N!bJubUWITtkzU!za96lxNg%3D%3D}
15 Aug 2011 14:00:00 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : User population provider is Database
15 Aug 2011 14:00:00 INFO com.nakisa.Logger - FunctionRunner : ensurePool : Current pool size:0
15 Aug 2011 14:00:00 INFO com.nakisa.Logger - FunctionRunner : ensurePool : Current pool size:0
15 Aug 2011 14:00:00 INFO com.nakisa.Logger - FunctionRunner.executeFunctionDirect: /NAKISA/RFC_REPORT took: 266ms
15 Aug 2011 14:00:00 INFO com.nakisa.Logger - BAPI_SAP_OTFProcessor_Report : WhereClause : ( (Userid is null) or (Userid='') ); Table : (SAP_UserPopulation); Dataelement : (UserPopulationInfo)
15 Aug 2011 14:00:00 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : User populated
15 Aug 2011 14:00:00 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : Role mapping provider is: SAP
15 Aug 2011 14:00:00 ERROR com.nakisa.Logger - SAPRoleMapping_SAP.MapRoles() : while trying to invoke the method java.lang.String.toUpperCase() of an object loaded from local variable 'value'
15 Aug 2011 14:00:00 INFO com.nakisa.Logger - com.nakisa.framework.login.Main : LogIn : Login process finished with errors
Any ideas? Should I maybe hardcode the location in the credentials.xml?
Kind regards
Dries Yssel -
SSO between Portal and Java WD application
Hi Experts,
I am using CE 7.2 on localhost and I am very new to SAP.
I need to know how can I get SSO between Portal and Java WD. I have a WD application that displays the logged in user using "IUser currentUser = WDClientUser.getCurrentUser().getSAPUser()", as well I can use "IUser user = UMFactory.getAuthenticator().getLoggedInUser()". Both work.
Q1. What is the difference in the 2 above?
Q2. My WD application is set to authenticate user. The WD application is in URL iView. I need SSO between Portal and WD application. Is there a way to get this SSO without SAP Backend (ECC), for now I just need SSO between Portal and Java WD appl.
Everything is in localhost.
Please advice. Thanks.> need to know how can I get SSO between Portal and Java WD.
Then I suggest you ask your question in the Web Dynpro Java forum instead of the Web Dynpro ABAP one. -
Role mapping between Portal and Back end systems
I am new to SAP EP.
I just want to know how the mapping between portal and back end system happens.
Scenario : There is a role in ECC system...say FI India. Now there is a request by the FI team that they want to access this role from Portal. In this case, please tell me how the security team will do it. Because I guess, it has to be done by the security team.Hi,
Usually the role from backend is uploaded to portal then it will be seen as Group and we need to assign our portal roles to this group. Please refer [this|http://help.sap.com/saphelp_nw73/helpdata/en/d6/7859ec80df46738e23ccb4f4c8c502/content.htm].
Regards,
Samir -
Different ways to establish SSO between Portal and ADP
Hi,
We are implementing payroll with the help of ADP.
Please let me know different ways of establishing SSO between portal and ADP
Thanks
Bala DuvvuriYou may a few issues. SSO with logon tickets is based on accessing web sites in the same domain. So, if the portal is on http://ourportal.company.com, then the web site being accessed needs to have a URL like http://adphosted.company.com. Is the ADP system accessible by a DNS alias that is within company.com? If so, you're OK. If not, then there will be problems.
The other SSO method is user mapping, but the security implications are not good...
Maybe you are looking for
-
WHY CAN I NOT GET DSL OR UVERSE SERVICE AT MY HOME.
I would like to know why i cannot get either internet service at my home. its a new home i understand. but you have a UVERSE fiber cable running under my front yard. you have DSL wiring under my front yard. i have a box in my front yard. and ye
-
How do I dispute a copyright claim against a video i made using a trailer in iMovie? The only content I used was the video I shot of friends daughter on a merry-go-round.IMovie had the music etc that I used. Here's the message It gives a number of op
-
Divide a pages document in half
Is there a way to split a Pages document into two separte files. The document is too large to upload to my server. Thanks!
-
All USB stops working after restarting iMac, please help!
I am having a serious problem with my iMac and i'm at a loss of what to do. I have a 24" imac with 10.5.6 and about a week or two ago I restarted my computer only to find that none of my USB ports were working. I thought it was a fluke so i just rest
-
Can't login to iCloud since I've changed my ID.
I've changed my ID for Apple, but my iCloud doesn't change the ID and ask me to input the password. I want to change the ID for iCloud, but I can't find how.