Passing percentage for the course C_TAW12_70

Hallo friends,
Do you know the passing percentage for the course C_TAW12_70?
Thanks,
Shilpa

Hi,
I think 70%
bye

Similar Messages

Pass percentage for the BI certification exam C_TBW45_70 is required

Hi Group,
Please kindly let me know the pass percentage ( % ) for the BI certification exam ( code : C_TBW45_70 ) in the SAP TechEd 2008. ( BI 7.0 certification at the Associate level ).
As far as my knowledge is concerned, last year it was 57% but, somebody told that it has been changed from this year to 67%.
So please let me know whether this is correct or not.
Regards,
Vishnu.

Hi Vishnu
I recently appeared for C_TBW45_04S. on July 11 '08
The pass Percentage for this Exam is 70%.
By the way I cleared the Exam.
Good Luck to you .
Thanks and regards
Novino

Pass percentage for ABAP Associate Certification in SAP TechED

Hi All,
May i know what is the pass percentage for ABAP Associate Certification in SAP TechED.
Thanks in Advance,
Ravi P

Hi Ravikumar P,
    I dont know about Teched but, SAP Education Channel Partner arranges for training - online or instructor-led - on certain amount of fees. Their schedules can be checked from official website of SAP.
For your ready reference, here it is --
Link: http://www.sap.com/asia/services/education/schedule/schedule_IN.htm
For fees and relevant short info, this page is sufficient.
Now, for your second part of the question, the passing percentage has been substantially reduced to 53 % in ABAP. But, the catch is -- partial marking has been eliminated.
This means, if one question has several sub-questions, you have to answer all of them right to get the marks allocated for that one question. If any of the answer to sub-questions gone wrong, whole of the marks assigned with that question will not be given to you.
Ex - Lets say, one question is
1) What is applicable in Job Application --
i) When you are asked to apply online, you should --
      a) Contact personally
      b) Ring them up
      c) Mail your Credentials
ii) When called for interview, you should not --
      a) Reach there in time
      b) Behave sober
      c) Break the rules altogether
    Suppose, 160 marks are there for 80 questions and this one is one out of those. Therefore, this one should fetch you, if done correctly ( Bold choice here ), 2 marks.
    But, suppose, you made wrong choice in either of two sub-questions as (a) or (b). None of the marks would be given to you. Even if you made one answer right.
Hope this would be good enough. Need even more info, you should contact any of the Education Channel Partner of SAP.
Thanks.
Kumar Saurav.

Passing Percentage for SAP-ABAP certificatio.

Hi All,
I want to know what is the passing percentage for SAP-ABAP certification.
Regards
Nitin.

Hello,
Go to this link to see syllabus and other details.
Very useful to know the details.
http://www.sap.com/services/education/certification/index.epx
Regards,
Ravi

Hi when I try to connect some bluetooth devices I get asked for my pass code for the mac air . I never had 1 is there a default code

hi
when I try to connect some bluetooth devices I get asked for my pass code for the mac air .
I never had 1 is there a default code
thanks
rob

the shaker wrote:
is there a default code
no.

Returnable Gate Pass Flow For The Abap Report

Hi,
I am ABAPER and i had been assigned to devleop a report which shows the Cycle Time for the materials which are send through Gate Pass outside the plant to a vendor and then coming back to plant.
I want to know which Tcodes,Tables are used in it so that flow can be understood...

Hi,
I want to know is there any tcode and table other than MB51 and MSEG where the values are stored. I am not able to make link between them i.e. the if purticular item is sent wr.t. 5A1 has come backi.e. 5A2 . i want to give a example i.e.. Tcode QA03 which is display inspection lot in which there is a tab named 'Inspection Lot Quantites' there are the material documents which are stored in it and gives the data that these are the mat. docs w.r.t. movt types.
I want to know is there any tcode like this which use to store the details like it.
Please guide me for it .....
Edited by: nav009 on Jan 20, 2010 7:31 AM
Edited by: nav009 on Jan 20, 2010 11:30 AM

TS1569 Where do I find the pass key for the wireless keyboard?

Where do I find my pass key for my new wireless keyboard?

It comes up on the screen of your Mac when going through the pairing process, as shown here:
http://support.apple.com/kb/TS1569?viewlocale=en_US&locale=en_US

How do u get the battery percentage for the iPod touch 5g

How do u get the battery percentage for iPod touch 5g

http://modmyi.com/forums/ipod-themes/816715-add-battery-percentage-ipod-touch-5t h-generation-ios-6-without-jailbreaking.html
Note that % battery on an iPod is not accurate. you will see large fluctuation in % battery and that is normal/expected.

Pass percentage for BASIS, code C_TADM51_70

Dear All,
Please anyone can tell me what is the pass marks for basis, code C_TADM51_70, which happened in Teched 2008.
Thanks
XEAG

Thanks for the reply

How to pass values for the checkbox

Hi all,
We all have seen the functionality of selecting a check box and then click the button and it performs the task(i.e in the hotmail when you select a line/lines by selecting the checkbox for that line and click the delete button those all mails are deleted). we are trying to implement this functionality. I have written the following code for that, but i get the values for the selected box if the box is the first one but if I did not select the first line and select the second line, i get the values for first line as well as for the secondline separated by comma . In other word it concatinates all values. Can I have some pointers?
<INPUT TYPE="CHECKBOX" NAME="selectedBoxes" UNCHECKED value=<%out.println(" \"" + boxValues + "\" ");
And also I don't know how to use the oncheck event for the check box...
Thanks in advance...
Ameeta

Thanks Kan,
But I am littlebit confuse about how does multiple values have been passed. For Example, i have selected 3 check boxes to delete the record. The value for each check box I need is name, event and hours...Each of these record is separated by '*'. I have three sets of values...for three records..
1) Ameeta*overTime*5.00
2) Ameeta*holiday*6.00
3) Ameeta*weekends*8.00
I have total 5 or 6 records for this person(Ameeta) and I want to delete these listed three...some how if I use the following coding it gives me all records before the last checked box...
while(rs1.next())
isEmpty = false;
eventType = rs1.getString("EVENT_TYPE" ) ; ;
eventDate = rs1.getString("EVENT_DATE" ) ;
hours = rs1.getString("HOURS" ) ;
hash += Double.parseDouble(hours) ;
boxValues += eventDate + "*" + hours + "*" shortEvents "#";
userId = rs1.getString("USER_ID" ) ;
// employeeId = rs1.getString("EMP_ID" ) ;
confirmFlg = rs1.getString("CONFIRM_FLAG");
// out.println("\nrecordQuery:\n" + recordQuery ) ;
%>
<tr>
<td colspan=5 width=100>
<INPUT TYPE="CHECKBOX" NAME="selectedBoxes" value=<%out.println(" \"" + boxValues + "\" "); %>>
<td width="150"><%=eventDate%></td>
<td width="150"><%=eventType%></td>
<td width="150"><%=hours%></td>
<td width="150"><%=location%></td>
<td width="150"><%=confirmFlg%></td>
</tr>
**************************************In this code basically I am concatinating so it is obvious that I get every thing before the check box..so I did the following change by adding the line below in the code
while(rs1.next())
boxValues = "";
everything else is same....
but now I get only the last one that is true too because I am asigning it to the null but I don't know how to pass all checked one.........can anybody help me?
Thanks in advance...
Ameeta

Changing an image for the course of a movie

I have a script that chnages the volume of the sound channel,
i want to also swap the image so if sounds are off a mute is on
image will be displayed then replaced when mute is off. I am able
to do this with the code below but my problem is the mute icon is
visible on all scene so i want to chnage it throughout the movie
not just on the frame, how can i make this script work so if i
click the mute icon the image will chnage on every instance of this
image?

Just extend the sprite across the timeline for the whole
movie.
Rob
Rob Dillon
Adobe Community Expert
http://www.ddg-designs.com
412-243-9119
http://www.macromedia.com/software/trial/

Help in CURSOR when pass parameter for the IN

Hi,
Need some help I have CURSOR that takes a VARCHAR2 and NUMBER but when I run my Procedure it gives invalid number. Here is the CURSOR
CURSOR get_count (p_list VARCHAR2, p_id NUMBER)
      IS
         SELECT COUNT (*) total_rows,
                NVL
                   (SUM (CASE
                            WHEN UPPER (cdcode) = 'PASS'
                               THEN 1
                            ELSE 0
                         END
                    0
                   ) tot_returned,
                  COUNT (*)
                - NVL (SUM (CASE
                               WHEN UPPER (cdcode) = 'PASS'
                                  THEN 1
                               ELSE 0
                            END
                       0
                      ) diff
           FROM testtable
          WHERE plistcol IN (p_list)
            AND pidcol = p_id;
plistcol is of datatype NUMBER
In my procedure I am building a list to comma separated numbers that goes in p_list parameter of type VARCHAR2 to the cursor i.e.
I have a for loop to build that list e.g.
loop
-- num is of datatype NUMBER
p_list := p_list || num || ',';
end loop
IF (p_list IS NOT NULL)
THEN
p_list := SUBSTR (p_list, 1, LENGTH (p_list) - 1);
END IF;here is how my p_list looks when i pass it on to the cursor
*12,345,678*
and here is how open the cursor
OPEN get_count (p_list, 99999);
and here is the error I get
SQLERRM ORA-01722: invalid number
Now when I hard *12,345,678* in my CURSOR SELECT it works fine, it's only when I pass this as parameter it fails. For example I hard code the values in my CURSOR select it works fine
CURSOR get_count (p_list VARCHAR2, p_id NUMBER)
      IS
         SELECT COUNT (*) total_rows,
                NVL
                   (SUM (CASE
                            WHEN UPPER (cdcode) = 'PASS'
                               THEN 1
                            ELSE 0
                         END
                    0
                   ) tot_returned,
                  COUNT (*)
                - NVL (SUM (CASE
                               WHEN UPPER (cdcode) = 'PASS'
                                  THEN 1
                               ELSE 0
                            END
                       0
                      ) diff
           FROM testtable
          WHERE plistcol IN (12,345,678) -- even '12','345','678' works when hardcoded
            AND pidcol = p_id;I even tried passing the values in the format *'12','345','678'* but still get the above error. So how can I pass the values to cursor IN clause.
So wondering what might be the issue.
Thanks

Why this kind of coding needs to be avoid - here is one demonstration of one aspect ->
satyaki>
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE    10.2.0.3.0      Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
Elapsed: 00:00:00.22
satyaki>
satyaki>select * from emp;
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      9999 SATYAKI    SLS             7698 02-NOV-08      55000       3455         10
      7777 SOURAV     SLS                  14-SEP-08      45000       3400         10
      7521 WARD       SALESMAN        7698 22-FEB-81       1250        500         30
      7566 JONES      MANAGER         7839 02-APR-81       2975                    20
      7654 MARTIN     SALESMAN        7698 28-SEP-81       1250       1400         30
      7698 BLAKE      MANAGER         7839 01-MAY-81       2850                    30
      7782 CLARK      MANAGER         7839 09-JUN-81       4450                    10
      7788 SCOTT      ANALYST         7566 19-APR-87       3000                    20
      7839 KING       PRESIDENT            17-NOV-81       7000                    10
      7844 TURNER     SALESMAN        7698 08-SEP-81       1500          0         30
      7876 ADAMS      CLERK           7788 23-MAY-87       1100                    20
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7900 JAMES      CLERK           7698 03-DEC-81        950                    30
      7902 FORD       ANALYST         7566 03-DEC-81       3000                    20
13 rows selected.
Elapsed: 00:00:01.90
satyaki>
--Your query works and here is the slightly modified version of your query
satyaki>
satyaki>
satyaki>declare
2
3   type t_ref_cursor is ref cursor;
4   l_cursor t_ref_cursor;
5   l_count number;
6   l_list varchar2(1000) := '10,20';
7   v_sql varchar2(1000);
8
9 begin
10
11 v_sql := '';
12 v_sql := v_sql||'select count(*) as tot_count ';
13 v_sql := v_sql||'from emp ';
14 v_sql := v_sql||'where deptno in ('||l_list||')';
15
16 open l_cursor for v_sql;
17 loop
18    fetch l_cursor into l_count;
19    exit when l_cursor%notfound;
20    dbms_output.put_line('count: '||l_count);
21 end loop;
22 close l_cursor;
23
24 end;
25 /
count: 8
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.09
satyaki>
--Now, modifying the input i can sniff into the entire data
satyaki>
satyaki>declare
2
3   type t_ref_cursor is ref cursor;
4   l_cursor t_ref_cursor;
5   l_count number;
6   l_list varchar2(1000) := '10,20) or (1=1';
7   v_sql varchar2(1000);
8
9 begin
10
11 v_sql := '';
12 v_sql := v_sql||'select count(*) as tot_count ';
13 v_sql := v_sql||'from emp ';
14 v_sql := v_sql||'where deptno in ('||l_list||')';
15
16 open l_cursor for v_sql;
17 loop
18    fetch l_cursor into l_count;
19    exit when l_cursor%notfound;
20    dbms_output.put_line('count: '||l_count);
21 end loop;
22 close l_cursor;
23
24 end;
25 /
count: 13
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.10
satyaki>Got me?
Regards.
Satyaki De.

Is it possible to pass parameters for the action in the confirmation dialog

I tried it but a null pointer exception is occuring. Is it possible to pass parameters ,if s give the solution....
Thanks and regards.
Karthik.

Hi Karthi,
Directly it is not possible. You can achieve it by this way.
1>     Create 2 Event Handlers say OK and OKTest.
public void OK(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin OK(ServerEvent)
    String param = "abc";
    wdThis.OKTest(wdEvent,param);
    //@@end
public void OKTest(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent, java.lang.String paramtest )
    //@@begin OKTest(ServerEvent)
     wdComponentAPI.getMessageManager().reportSuccess("Param : "+paramtest);
    //@@end
2>     Code for popup.
                String dialog = "No of Rows : ";
                IWDConfirmationDialog confDialog = wdComponentAPI.getWindowManager().createConfirmationWindow(dialog,wdThis.wdGetAPI().getViewInfo().getViewController().findInEventHandlers("OK"),"OK");
                confDialog.setTitle("Test Window");
                confDialog.show();
/thread/66776 [original link is broken]
Regards,
Mithu

Passing parameter for the bean function that deletes record from DB

I need to delete some record from the DB without updating the reset of the user screen.
I use commandButton with immediate attribute as true, because validation should be skipped.
So, I can't rely on backing bean values being updated, but need to pass a param to the function that does the delete (deleteTemplate) function below.
The value of this param is selected value in another comboBox called "template".
Code below is not parsing. Could you advise how to do it?
<a4j:commandButton id="deleteTemplate" value="Delete"
                         action="#{qtBeanParam.deleteTemplate(param['piPerformanceReturnsForm:template'])}" immediate="true" reRender="template,templateList,templateOwner,templateOwnerList"
                         styleClass="blue-button">
                    </a4j:commandButton>Error Parsing: #{qtBeanParam.deleteTemplate(param['piPerformanceReturnsForm:template'])}

Thank you for your reply.
Could I pass the value that is entered in some other field as a "parameter" though?
<f:param name="anyName" value="parameter" />
For example the value from the following comboBox?
<rich:comboBox id="template" width="250" value="#{qtBeanParam.templateName}" enableManualInput="true"
                              converter="#{templateConverter}" valueChangeListener="#{qtBeanParam.changeTemplate}" >
                              <a4j:support event="onselect" reRender="template,templateList" ajaxSingle="true" />
                              <a4j:support event="onchange" reRender="template,templateList" ajaxSingle="true" />
                         <f:selectItems id="templateList" value="#{qtBeanParam.templateList}" />
                    </rich:comboBox>

Trashing of preferences has become par for the course

I have noticed with disquiet the ever increasing recommendation of trashing preferences in this forum. Is this the "universal cure" for ever so many things now?
This is very cumbersome and annoying for anyone, even when following Peter Spier's much referred to post.
Trashing of preferences should really be necessary only very occasionally, if at all. InDesign seems to "corrupt" all too easily.
Why has InDesign become such a mimosa? CS5 in particular. This forum is rather full with myriad problems in CS5 which seem to have little to do with the users.
Too many things in CS5 don't seem to work as expected especially when migrating older documents. Or, things which used to work fine in CS3 or CS4, now cause problems. The answers to these problems are often quite flippant.
I have been following all things InDesign CS5 assiduously for a while now as our studio should be getting CS5 very shortly.
Many posts are not encouraging at all.
The power of inx also seems gone with the new procedure in CS5.
Is all this progress? Were the new features brought to maturity properly?

A lot of issues seem to come down to preferences becoming corrupt. It's been a long time since this fix has done anything for any of my misbehaving documents.
Of course when there are issues and things aren't working as well as expected the two main fixes are the IDML export and the trashing of preferences.
I have to admit though, both of these two fixes haven't done anything for me in a while.
Only yesterday, I had a document that I couldn't change the paragraph style to edit the point size of my body copy. InDesign kept crashing. If that happened to me and I wasn't sure how to fix I'd post on here. Sure there would be an echoed "Reset your preferences and do the export to IDML".
But neither of these worked for me. Turns out the Master Text frame was corrupt. Thankfully, I have enough experience to troubleshoot misbehaving documents. I was able to copy and paste my text into another document and continue working just fine.
Resetting preferences is a necessary evil; in that it removes a lot of the things you spent time setting up ever so carefully. As I had created many styles common to my line of work, Headings up to 5 levels, Body with bullets based on, numbered lists, lettered lists etc.
But not all was lost, as I have a template file with all these headings listed and the paragraph and character styles precreated, with the corporate style guide for colours also exported to an ASE file. I can easily load up a number of styles and colours back into my pallete. Along with saving my workspace and updating it regularly and saving that workspace file to a safe location if it ever needs to be.
So yeh, there are times when you'll have to reset your preferences, or export to IDML - but that's not the be all and end all of fixing documents. I can understand how some people become frustrated. But you have to remember the documents are just data, lines and lines of code. It's going to get corrupted from time to time.
Just as a particular computer game, that is very popular, regularly crashes and also can damage the saved data file. It happens in a lot of software, a lot of platforms and to a lot of people.
The IDML export and the Reset Preferences has always been there as a route to get out of sticky situations. But you have to remember that it may not be the case that this will fix your issue.
So as a port of call, it's recommended you follow those steps. But if it doesn't work then there's something more at play and it's a process of elimination to find the wonky bit of the document that is causing the crash or ill effects.

Passing percentage for the course C_TAW12_70

Similar Messages

Maybe you are looking for