Passing planned date, call date to equipment master

Friends
I just come thro one requirement. We have the instruments going for the calibration process thro Plans. In this what i need is each instruments maintenance plans call date date (calibration due), completion date (calibrated date) which has to pass on equipment master.
Is it any functionality available for passing these values into the equipments master.
Also we are planning shutdown jobs (No PS Module) thro maint order for various equipments. The requirement is in one single order for various machines i have to plan the shutdown jobs instead of going individual order. But its not possible at IW31.
Can i have some idea how you are handling this shut scanario

Hi,
To add these fields in equipment master, i dont think there is a standard way, instead you can use an exit to create a new tab page and add these fields in it.
Regarding shutdown maintenance you can go for revision no., that will help you collaborate all the orders created during this shutdown maintenance. Or create an order as shutdown maintenance and then create its suborders with individual maintenance tasks.
Thanks,
AS.

Similar Messages

Warranty dates in Equipment master

Dear all,
When iam doing Delivery(VL01N) Equipments are picking automatically through Serial number profile.
When iam doing service for that iam not able to capture My warrratny time. Because in Equipment masrer warrant dates
Begin guarantee & Warranty End dates are empty. How can i fill these dates automatically when iam doing delivery.
Many thanks,
Raj

Hi Raj
I dont think it is possible to fill these dates automatically while doing the delivery as Begin guarantee & Warranty End are being captured from Equipment Master Data .
If you see Equipment Master should have all the details related to equipment and logically it is not correct that equipment master data is empty and we are putting the equipment related details in other documents from somewhere else.
Regards
Sameer Saxena

Equipment master data : address in "Location" tab

Hi experts,
Can someone tell me what the "address" data (in equipment master data, "Location" tab) are for?
What is an example of business case which will use that "address"?
Thanks,
P.

Hi,
It is the same address data that is available on equipment header (Ctrl+F5). It could be the address of where the equipment is located or where it operates. Alternatively it might be the contact details for the equipment owner or maintenance company.
It is similar to maintaining partners but you can use it as suits the business requirements.
-Paul

Equipment master data display of "ship to party"

Hi experts!
I got following problem:
Delivering an equipment to a partner only the "sold-to-partner" number is filled by using the "BAPI_EQUI_CHANGE". The "ship-to-party" field remains grey. Therefore also the asset is updated the the "ship-to-party"-partner.
Changing the equipment manually the "ship-to-party" field is then filled automatically.
I already did the customizing, described in thread Partner Data in Equipment Master and thread Synchronisation between asset and equipment
Many thanks and best regards,
Nikolaus
Edited by: Nikolaus Aigner on Aug 12, 2009 2:46 PM

Dear Pete,
I got the answer
1.In Ih01 Valid date i was taking in past so it was showing the past history of equipment.
2.whenever I m dismantling any functional location it is showing multiple changes at a single time.
RC
Edited by: Raju chauhan on Oct 12, 2008 3:31 PM

Regarding Equipment master

Hi Experts!
I am SAP MDM consultant and I am working on a rquirement to model the Equipment Master Data in my repository.
SAP MDM only requires master data from Equipment master.
Kindly give me list of master data in Equipment master and give links explaining Equipment creation and maintenance process.
Thanks in advance!
Regards,
Ravi Verma

I don't think there is a standard program and IDOC , You will have to custom generate all of them.(Custom IDOC type, Custom program to send out IDOC, Use standard Equipment create / change event or standalone program to execute the IDOC generation).
Regards
Narasimhan

How to get planned date withrespect to Equipment

How to get planned date from maintenance plan withrespect to equipment
I.e when I pass Equipment number I need to have planned date and maintenance Plan and call number

I am sending screen shot of VIMHIS Table and also Maintenance plan Table

Equipment Master Location Tab End Customer data

Dear All,
I have a requirment to fetch the name and address of the end customer maintained in the Equipment and Serial number master data.
Kindly help me to fetch the relevent customer detail with respect to Equipement master.
Regards,
SaravanaaS

Dear All,
I have solved my by following the below logic.
We have to get the value of ILOAN Number from EQUZ table, then pass the value and Execute ILOA table where in we can get the ADRNR Number.
Address Number should be passed to ADRC Table to get the address details of the consumer.
I take this oppurtunity to thank everyone who contributed this thread.
Regards,
Saravanaa.S
Edited by: Saravanan Sevugaperumal on May 15, 2009 4:30 PM

How to pass realtime data from a sub vi to a calling vi?

I'm trying to pass some data from a called (sub) vi to the calling vi,
while the sub vi is running. I've tried passing to a global, but the
calling vi doesn't show the results until the sub vi has completed
execution. I understand why this is happening, I'd like a method, if
one exists, to work around it.
Thanks!
Bill

You've done several things incorrectly. First, the subVI has a while loop that terminates with a front panel Boolean. Since you don't make the front panel of the subVI visible, the subVI just runs with no way to stop it. When you call a subVI, execution passes to the subVI and the calling VI is paused. Since the subVI has no way to stop and return to the main, the while loop in the main is not running and reading the global variable. If you were to drag the subVI outside the while loop, then you would see the global update. You still would need to make the subVI visible in order to be able to press it's stop button. Of course, with the subVI visible, it's front panel is showing the value getting updated and there's no reason to have a global in the main anyway.
If you want to have a subVI remain hidden, you can't use a while loop with a front panel control that's needed to stop it. Well, you can but that gets kind of complicated. If you do have a subVI and want to update an indictor with a global, the reading of the globabl should be done in a separate while loop. To keep the update in the same loop, don't use a global. You can create a reference to a front panel indicator and pass that to the subVI. The subVI writes to the value property. Here's a real simple example of that in 7.0.
Attachments:
Reference.llb ‏23 KB

Help requested on Procedure to Archieve Equipment Master Data

Hello SAP Gurus,
We have a requirement to Archive the Equipment Master data in SAP 4.7 system that run on Linux platform with Oracle 10g database. Can anyone of you please guide us with any links or documents which would detail the step by step process on how to do it and what are the consideration that have to be taken in to account.
Any How To document with step by step process would be of great help as we have not this task before.
Regards
Murali

Thank you for your suggestion
I was trying to archieve one equipment data in our sandbox system. My functional consultant has set the deletion flag on equipment to be deleted and then we are trying to run SARA tcode for Object PM_EQUI and defined variants needed.
Preprocessing went through fine next we had run Write Job that too completed successfully and there was a archive session created as well.
when go to configure Delete in SARA it is showing that there is no data to be selected . when I look in to CCMS archieve monitor in tcode SAR_SHOW_MONITOR this shows as - No Method Method assigned !!
Can you please suggest what can be the issue ? I am clue less as this was my first experience with SARA Tcode.
Is there any howto document available that give step by step screenshot for archieving ?
Regards
Murali

Enhancement for Equipment master data

Hi all
I want to find an enhancement for Equipment master data. I want to add some customer fields to Equipment data,but i can't find the enhancement.Anybody tell me the Enhancement which be useful for that. thanks.
BR
Chris.

Hi,
you can add new tab on the screen and provide your custom field on that tab. You have to add a new tab for any Technical Object by doing some configuration changes in SPRO. first go to SPRO and in screen sequences add a new tab sequence against the profile. Now in the function group SAPLXTOB you can see this new tab screen. Do your requirements on this screen.
Reward if useful and get back to me if you need any help.
Thanks,
Anil

ABC indicator in PM equipment master data

Hi expert,
Can anyone explain about ABC indicator functionality in PM equipment master data
Thanks
Rgds,

Hi Michael,
As per Application help, ABC indicator signifies:
An indicator that is assigned by the procedure of ABC analysis.
The following ABC indicators are possible:
A - Important
B - Less important
C - Relatively unimportant
According to these criteria, "A" materials are those materials that are of greatest importance for the production operations of a company.
Examples of use for ABC indicators are vendor master records, material master records, and master records of technical objects.
You can customize the values in ABC indicator as per your requirement.
Saurabh.

Migration of Equipment Master Data together with PRT data

Hello Experts,
we need to migrate Equipment Master Data which have activated the view PRT data. Most of the fields in this view are stored in table CRFH. Is there a way to migrate Equipment Master Data together with the PRT data of the Equipment? All the BAPI's I found do not have an import structure for those fields. Is a batch-input the only way?
Does anybody know a mass change transaction for Equipments?
Thank you and Regards
Christian

Hi Krishna,
You can use the standard batch input program RFBIDE00 in LSMW to update the customer master data. However, there might be scenarios where you might be required to update the fields which do not get updated by the standard bacth input program. If any of such fields are defined as mandatory, then you wont be able to use this method directly.
In such cases you will have to either create a recording to poplate the fields which do not get updated by the standard program and use both the recording and the standard batch input program to update the customer master data OR create a recording for customer master create and use the same in LSMW.
Best regards,
Harsh

Can I call a C program in trigger, and pass updated data to this program?

Can I call a C program in Oracle trigger, and pass updated data to this program?
Thank you

An update trigger has access to both the old and new values. Your update trigger can call an external procedure (a C program) and pass the old and new values as parameters. For example:
CREATE OR REPLACE TRIGGER <tname> BEFORE UPDATE OF <tab> FOR EACH ROW
BEGIN
pkg.proc(:old.col, :new.col);
END;
Where pkg.proc has been created as an external procedure.

Technical ID of Equipment Master Data

Hi Experts,
We have maintain tech ID in equipment Master Data.What we are doing we are keep replacing the tech ID for same equipment No (While replacing the equipment ). Now i want to trace the usage of tech ID.I mean to say i want to trace in how many equipment i have used the same tech ID No. Can anybody tell me how can i trace the same.
AR
Edited by: Amit Rana on Aug 17, 2009 1:17 PM

hi
i think you can have one Tech ID for one equipment which will be useful for tracking ,if you want one equipment with different Tech ID then you can use the method i specified earlier.
in the usage list you can find the Tech ID validity from and to ,from which you can trace.and you can create an querry for table display of EQUZ where user can specify the Tech ID and get the output for equipment no
regards
thyagarajan

I built a DAQ vi in the labview6.1 and i compiled it to a dll.And then I wanted to call it and expected it pass acquired data to visual c++

I built a DAQ vi in the labview6.1 to acquire four channels'data(use pci_6110E) .And i compiled it to a dll.I wanted to use visual c++ to call it and expected it pass acquired data to visual c++.

Hello
If you are using Visual C++, then I would recommend using the NI-DAQ function calls instead of having labview layer in there. YOu can pretty much accomplish any task using the NI-DAQ function calls that you can by using the LabVIEW DAQ vi's. Plus this way you wont have to worry about passing the correct data type from LabVIEW into C++. You can find the examples for using these function calls under ../NI-DAQ/Examples/.
I hope this helps
Bilal Durrani
NI
Bilal Durrani
NI

Passing planned date, call date to equipment master

Similar Messages

Maybe you are looking for