Passing select-option to FM
Hi
I have to create a FM where I have to code Select-options to FM .
how could I create FM (input/table ) parameter in FM for LIFNR field.
Regards,
Vinesh.
Hi vine,
For Eg, In the report if the select-option was like
select-options: s_lifnr for lfa1-lifnr.
Now in the TOP include of the function module declare a types like,
types: t_lifnr type range of lfa1-lifnr.
In the function module use like
FUNCTION ztest.
""Local Interface:
*" IMPORTING
*" VALUE(I_LIFNR) TYPE t_lifnr OPTIONAL
Now this will act as a select-options .
Regards,
Raj.
Similar Messages
-
Problem in passing select-options to class meathods , type any table
<h1>how to pass type any table to class meathod</h1>
<h3>hi all
i'm trying to build class to validate the selection screen , like select-options and parameters
while writing meathod to validate the select-options
its throwing parameter mismath error</h3>
<h4>i tried like made import parameter in class meathod as 'TYPE ANY TABLE' and tried to pass select-options from my program it is saying type mismatch , how to overcome this problem </h4>
<h4>and i want to pass any select option , either of type lfa1-lifnr or mara-matnr or any other</h4>
Moderator message : Don't shout, use proper font size for explaining the question. This has been discussed in ABAP forums before. Search for available information. Thread locked.
Edited by: Vinod Kumar on Sep 14, 2011 11:20 AMhI
Triggering and Handling events
At the moment of implementation, a class defines its:
Instance events (using the EVENTS statement)
Static events (using the CLASS-EVENTS statement)
Classes or their instances that receive a message when an event is triggered at runtime and want to react to this event define event handler methods. Statement: METHODS
CLASS IC1_VEICHLE DEFINATION.
PUBLIC SECTION.
METHOD CONSTRUCTOR IMPORTING
EVENTS VEICHEL_CREATION.
ENDCLASS
CLASS LC1_VEICHLE IMPLIMENTATION.
METHOD CONSTRUCTOR
RAISE EVENT VEICHLE_CREATION.
REWARD IF USEFULL -
Passing Select-options as parameter to function module
I need to pass a select-option as a parameter to a function module. Is this possible?
There is an option of passing all the values of the select-option to an internal table, passing that internal table as parameter to the function module, and then adding it manually again to a select-option in the function module.
But is there any direct way to do this?Hi,
I have a similar problem: I have RFC function module to which I want to pass select options. Therefore I defined table parameters as follows:
IT_RUNID TYPE EFG_TAB_RANGES
IT_PERNR TYPE EFG_TAB_RANGES
IT_REINR TYPE EFG_TAB_RANGES
I can successfully pass my values to the module, but if I try to check these parameters
using
CHECK IT_TRIPS-RUNID IN IT_RUNID.
CHECK IT_TRIPS-PERNR IN IT_PERNR.
CHECK IT_TRIPS-REINR IN IT_REINR.
the check always fails, I guess because there are leading zeros in the ranges. Is there a way to solve this problem?
Thanks and regards,
Martin -
How to pass select-option filed to Function Module Exporting Parameter
Hi,
How to pass select-option filed to Function Module Exporting Parameter.
ThanksHi,
DATA: BEGIN OF ITAB5_WRK OCCURS 0,
KUNNR TYPE KNKK-KUNNR, "CUSTOMER #
SBGRP TYPE KNKK-SBGRP, "CREDIT REP
KLIMK TYPE KNKK-KLIMK, "CREDIT LIMIT
NAME1 TYPE KNA1-NAME1, "CUSTOMER NAME
SKFOR TYPE KNKK-SKFOR, "TOTAL A/R
AMT1 TYPE KNKK-SKFOR, "CURRENT
AMT2 TYPE KNKK-SKFOR, "01-30
AMT3 TYPE KNKK-SKFOR, "31-60
AMT4 TYPE KNKK-SKFOR, "61-90
AMT5 TYPE KNKK-SKFOR, "91-120
AMT6 TYPE KNKK-SKFOR, "OVR 120
BZIRK TYPE KNVV-BZIRK,
END OF ITAB5_WRK.
SELECT-OPTIONS P_COMP FOR T001-BUKRS
SELECT KUNNR SBGRP FROM KNKK
INTO TABLE ITAB5_WRK
WHERE SBGRP IN P_REP
AND KUNNR GE '0001000000'
AND SKFOR NE 0.
LOOP AT ITAB5_WRK.
DELETE ADJACENT DUPLICATES FROM ITAB5_WRK COMPARING KUNNR.
ENDLOOP.
PERFORM GET_CREDIT_LIMITS.
*=======================================================================
IF P_DIST NE SPACE.
LOOP AT ITAB5_WRK.
SELECT SINGLE * FROM KNVV WHERE KUNNR EQ ITAB5_WRK-KUNNR
AND VKORG EQ P_COMP
AND VTWEG EQ '20'
AND SPART EQ '10'
AND BZIRK IN P_DIST.
IF SY-SUBRC EQ 0.
MOVE KNVV-BZIRK TO ITAB5_WRK-BZIRK.
MODIFY ITAB5_WRK.
ELSE.
DELETE ITAB5_WRK.
ENDIF.
ENDLOOP.
ENDIF.
*==============================================================
LOOP AT ITAB5_WRK.
MOVE: 'F/S' TO WRK-KKBER,
ITAB5_WRK-KUNNR TO WRK-KUNNR.
PERFORM AGING.
ADD: W_SNFAE TO ITAB5_WRK-AMT1,
W_SFAE1 TO ITAB5_WRK-AMT2,
W_SFAE2 TO ITAB5_WRK-AMT3,
W_SFAE3 TO ITAB5_WRK-AMT4,
W_SFAE4 TO ITAB5_WRK-AMT5,
W_SFAE5 TO ITAB5_WRK-AMT6,
W_SFAEL TO ITAB5_WRK-SKFOR,
W_SNFAE TO ITAB5_WRK-SKFOR.
MOVE: 'SPEC' TO WRK-KKBER,
ITAB5_WRK-KUNNR TO WRK-KUNNR.
*PERFORM AGING.*
ADD: W_SNFAE TO ITAB5_WRK-AMT1,
W_SFAE1 TO ITAB5_WRK-AMT2,
W_SFAE2 TO ITAB5_WRK-AMT3,
W_SFAE3 TO ITAB5_WRK-AMT4,
W_SFAE4 TO ITAB5_WRK-AMT5,
W_SFAE5 TO ITAB5_WRK-AMT6,
W_SFAEL TO ITAB5_WRK-SKFOR,
W_SNFAE TO ITAB5_WRK-SKFOR.
MODIFY ITAB5_WRK.
ENDLOOP.
FORM AGING.
*CALL FUNCTION 'CUSTOMER_DUE_DATE_ANALYSIS'*
EXPORTING
BUKRS = P_COMP
KKBER = WRK-KKBER
KUNNR = WRK-KUNNR
RASID = 'FEND'
KLIMP = 'X'
IMPORTING
SFAE1 = W_SFAE1
SFAE2 = W_SFAE2
SFAE3 = W_SFAE3
SFAE4 = W_SFAE4
SFAE5 = W_SFAE5
SFAE6 = W_SFAE6
SFAEL = W_SFAEL
SNFA1 = W_SNFA1
SNFA2 = W_SNFA2
SNFA3 = W_SNFA3
SNFA4 = W_SNFA4
SNFA5 = W_SNFA5
SNFA6 = W_SNFA6
SNFAE = W_SNFAE
EXCEPTIONS
NO-AGING_SCHEDULE = 1
NO_TABLE_INPUT = 2.
CASE SY-SUBRC.
WHEN 1.
MESSAGE E999 WITH 'PLEASE ENTER AGING SCHEDULE'.
WHEN 2.
MESSAGE E999 WITH 'DO NOTHING ??'.
ENDCASE.
ENDFORM. "AGING
Thanks -
HOW TO PASS SELECT-OPTIONS AS IMPORT PARAMETER TO A CLASS
Hi experts,how to pass select options value as a export parameters to a zclass.
can give me some idea.
Thanks
saiAs Sachin already said, selection options are stored in an internal table. You can reconstruct the table type without the corresponding input fields using the type addition RANGE OF.
So - assuming you have the following in your program:
DATA: wa TYPE sflight.
SELECT-OPTIONS so_car FOR sflight-carrid.
you can create a publically-visible type in your class using direct type entry and the code
TYPES: my_selectoption TYPE RANGE OF sflight-carrid.
and use this to define the importing parameter of the method.
The only other thing you have to remember is that select-options generates an internal table with header line. Thereore, to pass the table to the method, you would use (in the above example) so_car[], and not just the name of the select-option.
Hope this helps.
Regards
Jon. -
Passing SELECT-OPTIONS value to Function Module
Hi,
I need to pass select-options value to a function module.
Code is like the following:
SELECT-OPTIONS seltab FOR object-type.
CALL FUNCTION 'Z_MY_FM'
EXPORTING
sel_tab = seltab
IMPORTING
result_tab = it_result
I have found a similar problem in the SDN forum: How to pass select-options parameter to FM?
However, that could not help me much in solving my problem.
So far I have tried to created a structure in DDIC with the following components for the select-options:
SIGN - BAPISIGN
OPTION - BAPIOPTION
LOW - ZBWOBJECTTYPE (my type)
HIGH - ZBWOBJECTTYPE (my type)
and subsequently a table type for this structure which is specified in the "Import" tab of my function module.
Unfortunately, when I ran the program a runtime exception occured (CALL_FUNCTION_CONFLICT_TYPE).
Could anyone please help me on this issue?
Thanks in advance.
Regards,
Joon MengHello Joon,
CALL FUNCTION 'Z_MY_FM'
EXPORTING
sel_tab = seltab
IMPORTING
result_tab = it_result
You have defined SELTAB as a SELECT-OPTION.
So when you pass only SELTAB, the header line is transferred to the FM. When you pass SELTAB[] the whole table(range) is passed.
It is similar to the concept of an internal table with header line.
Hope i am clear.
Anyways how have you defined result_tab and sel_tab ?
BR,
Suhas -
Passing SELECT-OPTIONS to smart forms
hi ,
how can we pass select options from a program to a smart form.
Regards
ArunHi,
Just try to append the valid values in select options to internal table from report.
Then pass that internal table(ofcourse, you need to create user-defined struture if needed in SE11) from report to smart forms.
Rgds,
J.Jayanthi -
Passing select-options to method of class
Hai friends,
Could u please tell me how to pass select-options as parameters to method of a class.Hi
You have to declare the select
options like
<b>DATA: l_kunnr TYPE STANDARD TABLE OF wselkunnr,</b>
see this example
*& Report ZCL_TEST_ANJI
REPORT zcl_test_anji.
TABLES kna1.
DATA: l_kunnr TYPE STANDARD TABLE OF wselkunnr,
l_kna1 TYPE STANDARD TABLE OF kna1,
l_sales TYPE STANDARD TABLE OF vbak,
l_cust TYPE kna1,
l_vbak TYPE vbak.
DATA: obj_cust TYPE REF TO zcl_test_anji.
SELECT-OPTIONS: s_kunnr FOR kna1-kunnr.
Start of Selection
START-OF-SELECTION.
CREATE OBJECT obj_cust.
SET HANDLER obj_cust->event_handler_1 FOR obj_cust.
SET HANDLER obj_cust->event_handler_2 FOR obj_cust.
l_kunnr[] = s_kunnr[].
CALL METHOD obj_cust->zcust
EXPORTING
s_cust = l_kunnr
RECEIVING
it_kna1 = l_kna1.
IF NOT l_kna1[] IS INITIAL.
LOOP AT l_kna1 INTO l_cust.
WRITE: / l_cust-kunnr, 12 l_cust-name1,
48 l_cust-ort01, 85 l_cust-land1,
95 l_cust-pstlz.
HIDE l_cust-kunnr.
ENDLOOP.
ENDIF.
At line Selection
AT LINE-SELECTION.
CASE sy-lsind.
WHEN 1.
CALL METHOD obj_cust->zso
EXPORTING
im_kunnr = l_cust-kunnr
RECEIVING
it_so = l_sales.
IF NOT l_sales[] IS INITIAL.
LOOP AT l_sales INTO l_vbak.
WRITE: / l_vbak-kunnr, 12 l_vbak-vbeln,
24 l_vbak-vkorg, 30 l_vbak-audat,
43 l_vbak-netwr.
ENDLOOP.
ENDIF.
ENDCASE.
<b>Reward points if useful</b>
Regards
Anji -
Passing select-options value in method
How to pass select-options value in method ?
Example:
Select-options: carrid for spfli-carrid.
class cl_myclass implementation.
select carrid connid from
spfli where carrid in carrid.
endclass.
ThanksHello Anee
The coding of this functionality is quite simple:
REPORT zmy_report.
DATA: go_myclass TYPE REF TO zcl_myclass,
gd_repid TYPE syst-repid.
PARAMETERS:
p_bukrs ...
SELECT-OPTIONS:
o_kunnr ...
START-OF-SELECTION.
gd_repid = syst-repid.
CREATE OBJECT go_myclass
EXPORTING
id_calling_program = gd_repid.
And that's how your CONSTRUCTOR method should look like:
METHOD constructor. " IMPORTING parameter id_calling_program
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
CURR_REPORT = id_calling_report
TABLES
SELECTION_TABLE = me->mt_selopts.
" NOTE: define mt_selopts as instance attribute of table type RSPARAMS_TT
ENDMETHOD.
Finally you have to extract the parameter and select-options from MT_SELOPTS.
Regards
Uwe -
Showing error in passing select option to smartforms
Dear Friends,
I have done program of passing select option to smartforms. But it was showing errorin Types of Global defination that the flat structure is not allowed. So pls guide me.
Thanks in advance,
PradipkumarHi Pradip,
<li>When you want pass select-option from program to Smartform. You need create one structure in SE11 (data dictionary) and Use that under Form interface ->Tables tab
<li>The structure should have the following fields.
low
high
sign
option
<li>The structures should be same in the program and smartform when that is used as interface.
Thanks
Venkat.O -
How to Pass Select-options Single values as Parameter value to Method ?
Hi Friends,
I need to pass select-options values(single values) for s_arbpl to the method "process_percent_planned". Now all single values are in internal table s_arbpl-low field. I need to pass this internal table(s_arbpl-low) values to the method where i will run query based on these single values.In my below code i am passing value through variable w_arbpl. I have defined this parameter in the method.But here only one value is passed to method. I want multiple single values (in s_arbpl-low) should be passed. Please let me know how to correct code.
Tables: crhd.
Data: ktext type auftext,
w_arbpl type arbpl.
select-options: s_arbpl for crhd-arbpl.
ktext = 'Test'
create object obj_plan.
call method obj_plan->process_percent_planned
exporting
ktext = ktext
w_arbpl = s_arbpl-low.
Thankshi ,
when you want to pass S_ARBPL AS PARAMETER IN SELEC OPTION
ARBPL SUCH AS
WIN002
WIN003
WIN004
WIN005
WIN006
WIN007
IN MULTIPLE SELECTION S_ARBPL
THEN
USE
Tables: crhd.
Data: ktext type auftext,
w_arbpl type arbpl.
select-options: s_arbpl for crhd-arbpl.
ktext = 'Test'
LOOP AT S_ARBPL .
create object obj_plan.
call method obj_plan->process_percent_planned
exporting
ktext = ktext
w_arbpl = s_arbpl-low.
ENDLOOP.
REGARDS
dEEPAK .
THEN SELECT THAT
call method obj_plan->process_percent_planned
exporting
ktext = ktext
w_arbpl = s_arbpl-low. -
Passing Select option to the sub routine
Hi All ,
how can we pass select option values to a subroutine ,
Thanks in Advance
VinayHi Vinay Kolla,
Check out this.
TYPES: TYP_DATUM TYPE RANGE OF SY-DATUM.
DATA: WA_DATUM TYPE LINE OF TYP_DATUM.
SELECT-OPTIONS : S_DATUM FOR SY-DATUM.
START-OF-SELECTION.
PERFORM WRITE_DATUM TABLES S_DATUM[].
*& Form write_datum
* text
* -->P_S_DATUM text
FORM WRITE_DATUM TABLES P_S_DATUM TYPE TYP_DATUM.
LOOP AT P_S_DATUM INTO WA_DATUM.
WRITE : /10 WA_DATUM-SIGN,
WA_DATUM-OPTION,
WA_DATUM-LOW,
WA_DATUM-HIGH.
ENDLOOP.
ENDFORM.
Regards,
R.Nagarajan.
We can - -
Passing select options through subroutines
Hi
how do you pass select option values through subroutines?Hello,
Is this what you are looking for:
TYPES: ty_r_bukrs TYPE RANGE OF bukrs.
DATA:
v_date TYPE datum,
v_bukrs TYPE bukrs.
SELECT-OPTIONS:
s_bukrs FOR v_bukrs OBLIGATORY,
s_date FOR v_date.
AT SELECTION-SCREEN.
PERFORM f_check_cocd
USING s_bukrs[].
*& Form f_check_cocd
* Check Comp. Code
FORM f_check_cocd
USING fp_s_bukrs TYPE ty_r_bukrs.
DATA: l_v_bukrs TYPE bukrs.
SELECT bukrs UP TO 1 ROWS
FROM t001
INTO l_v_bukrs
WHERE bukrs IN s_bukrs.
ENDSELECT.
IF sy-subrc <> 0.
* Throw Error Message
ENDIF.
ENDFORM. " f_check_cocd
BR,
Suhas -
Passing select-options to class methods
Hi,
I want to pass a select-option filled in the selection screen by the user to a method of my class. Since select-options are hold as an internal table with fields sign option low high, and passing internal tables to methods require typing, what should I write as the name of this internal table type?
For example;
select-options: so_carid for spfli-carrid.
I want to pass the contents of so_carid to my method defined in a classhI
Triggering and Handling events
At the moment of implementation, a class defines its:
Instance events (using the EVENTS statement)
Static events (using the CLASS-EVENTS statement)
Classes or their instances that receive a message when an event is triggered at runtime and want to react to this event define event handler methods. Statement: METHODS
CLASS IC1_VEICHLE DEFINATION.
PUBLIC SECTION.
METHOD CONSTRUCTOR IMPORTING
EVENTS VEICHEL_CREATION.
ENDCLASS
CLASS LC1_VEICHLE IMPLIMENTATION.
METHOD CONSTRUCTOR
RAISE EVENT VEICHLE_CREATION.
REWARD IF USEFULL -
Passing Select-options in OO ABAP
Hi,
How to use select-options in oo ABAP?
Regards,
Ravi SHi Ravi,
You have to define a type as below
TYPES:tr_matnr TYPE RANGE OF matnr.
DATA: gv_matnr TYPE mara-matnr.
SELECT-OPTIONS: so_matnr FOR gv_matnr.
CLASS lcl_example DEFINITION
CLASS lcl_example DEFINITION.
PUBLIC SECTION.
METHODS:
get_data
EXPORTING
so_matnr TYPE tr_matnr.
ENDCLASS.
CLASS lcl_example IMPLEMENTATION
CLASS lcl_example IMPLEMENTATION.
METHOD get_data.
SELECT COUNT(*)
FROM mara
WHERE matnr IN so_matnr[].
ENDMETHOD.
ENDCLASS.
If you have to pass it globally create a table type that has the same structure as select-opton ( that is low high sign option ).
PLEASE REWARD THE POINTS
Thanks & Regards,
Sujith -
How to pass select-options variable to a form.
I have a select-options variable smatnr. I need to pass this select-options variable to a form by
perform using smatnr changing svar.
form cond_types using pmatnr changing svar.
IT gives an error saying imcompatible types been passed between smatnr and pmatnr.
Any ideas, what is wrong. How do I pass a select-option variable into a form the right way.
Thanks
RamTry like this:
TABLES: vbak.
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln.
START-OF-SELECTION.
PERFORM get_data USING s_vbeln[].
*& Form get_Data
FORM get_data USING p_s_vbeln LIKE s_vbeln[].
ENDFORM. " get_Data
Regards,
Naimesh Patel
Maybe you are looking for
-
Just got new iphone 4s. Trying to edit photo but screen is black and with "constraint" bar at the bottom. I am unable to clear the black screen or get back to photo gallery. Help!
-
Firewire 400 and 800 problem ? Need confirmation
OK, I have been running 2 external Lacie HD's over a USB hub into my MacBook Pro. A couple of weeks ago I decided that I needed more storage so purchased 2 Western Digital MyBook Pro's at 500GB. I got these two specifically because I knew they suppor
-
Reliable internet in Time Capsule
Hello, I'm sure I'm not the first person to write about this as I've been reading through many other posts and a plethora of alternatives. However, I am always open for other ideas and opinions, so if any of you would like to share some theories and
-
We have this merge statement that is created dynamically. If I use the hint in the merge clause (not the selects) it falls over ORA 12801 Error in parallel server query AND ORA 30563 Outer join operator (+) not allowed in select list. Real environmen
-
Wrong status in /CCM/D_UPD_STATE after publication
Hello, when I click on a procurement catalog during shop trx, SRM tries to connect to CCM and gives following error: Your session has timed out - call up SAP Catalog Search Engine again in SRM " There is nothing wrong with profile settings (RZ10). I