Passing select options for component usage

Hi,
I have a working component that has a selection screen with three select options on.
I want to use this component from a new component (as a drill down from an ALV list in the new component).
Anyone know of a sample in SAP or a blog anywhere that provides a sample of how to do this?
Cheers,
Ross

Hi,
you can refer http://help.sap.com/saphelp_nw70ehp1/helpdata/en/a7/1d8b412bb5b35fe10000000a1550b0/frameset.htm
and http://www.****************/Tutorials/WebDynproABAP/Reusability/demo.htm
Thanks,
Chandra

Similar Messages

Select-options for date field.

Hi all,
i need to give select options for Date field.How can i give that.
Thanks & Regards
Ravi.

Hi Ravi,
Use the Component WDR_SELECT_OPTIONS to include select options in Web Dynpro ABAP. Follow these steps:
1. In your Component , "Used Componet" tab add Component WDR_SELECT_OPTIONS . Component Use can be any name that you want to give, eg SELECT_OPTIONS
2. Go to the View where you want to include the Date Select Options. I am assuming that you already have an Attribute of Type DATS in your context.
3. View: Properties Tab:Create Controller Usage and select
SELECT_OPTIONS     WDR_SELECT_OPTIONS
SELECT_OPTIONS     WDR_SELECT_OPTIONS     INTERFACECONTROLLER
4. View Layout Tab:Include a View Container. In this view container we will show the Date Select Options.
5. View Attributes Tab: Create Following two attributes:
M_HANDLER type IF_WD_SELECT_OPTIONS
M_WD_SELECT_OPTIONS type IWCI_WDR_SELECT_OPTIONS
6: View Methods Tab: Create a method eg CREATE_SELECTION_SCREEN. Call this method in the WDDOINIT of the view.
7:CREATE_SELECTION_SCREEN: Write following Code:
* Data Declaration
data:
        lt_range_table TYPE REF TO DATA.
data:
        lr_componentcontroller TYPE REF TO IG_COMPONENTCONTROLLER,
        lr_componentusage TYPE REF TO IF_WD_COMPONENT_USAGE.
* Execution
* Create Used Component
lr_componentusage = wd_this->wd_cpuse_select_options( ).
if LR_COMPONENTUSAGE->HAS_ACTIVE_COMPONENT( ) is initial.
    lr_componentusage->create_component( ).
endif.
* Get pointer to interface controller of select options
wd_this->M_WD_SELECT_OPTIONS = wd_this->wd_cpifc_select_options( ).
* initialize selction screen
wd_this->M_HANDLER = wd_this->M_WD_SELECT_OPTIONS->init_selection_screen( ).
* Create Range Table for: Date
CALL METHOD WD_THIS->M_HANDLER->CREATE_RANGE_TABLE
    EXPORTING
      I_TYPENAME     = 'DATS'
    RECEIVING
      RT_RANGE_TABLE = lt_range_table.
* Add Selection Field for: Date
CALL METHOD WD_THIS->M_HANDLER->ADD_SELECTION_FIELD
    EXPORTING
      I_ID                         = '<name of date attribute in the context>'
*      I_WITHIN_BLOCK               = MC_ID_MAIN_BLOCK
*      I_DESCRIPTION                =
*      I_IS_AUTO_DESCRIPTION        = ABAP_TRUE
      IT_RESULT                    = lt_range_table
*      I_OBLIGATORY                 = ABAP_FALSE
*      I_COMPLEX_RESTRICTIONS       =
*      I_USE_COMPLEX_RESTRICTION    = ABAP_FALSE
*      I_NO_COMPLEX_RESTRICTIONS    = ABAP_FALSE
*      I_VALUE_HELP_TYPE            = IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_NONE
*      I_VALUE_HELP_ID              =
*      I_VALUE_HELP_MODE            =
*      I_VALUE_HELP_STRUCTURE       =
*      I_VALUE_HELP_STRUCTURE_FIELD =
*      I_HELP_REQUEST_HANDLER       =
*      I_LOWER_CASE                 =
*      I_MEMORY_ID                  =
*      I_NO_EXTENSION               = ABAP_FALSE
*      I_NO_INTERVALS               = ABAP_FALSE
*      I_AS_CHECKBOX                = ABAP_FALSE
*      I_AS_DROPDOWN                = ABAP_FALSE
*      IT_VALUE_SET                 =
*      I_READ_ONLY                  = ABAP_FALSE
*      I_DONT_CARE_VALUE            =
*      I_EXPLANATION                =
      I_TOOLTIP                    = 'Select Date'.
8: To Fetch Data entered in the selection field, write following code on action of button click:
data:
        lt_date type REF TO DATA.
FIELD-SYMBOLS:
                 <fs_date> TYPE table.
* retrieve Date from Select Options
CALL METHOD WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD
    EXPORTING
      I_ID           = '<attrib_name>'
    RECEIVING
      RT_RANGE_TABLE = lt_date.
* assign Date Field Symbol
ASSIGN lt_date->* to <fs_date>.
9: Windows Window Tab: In the View Conatiner, embed the WND_SELECTION_SCREEN view from SELECT_OPTIONS component Usage of WDR_SELECT_OPTIONS component.
Regards,
Reema.

Requirement to maintain select-options for multiple fileds in webdynpro aba

Hello Gurus,
We have a requirement to maintain select-options for multiple fileds in webdynpro abap.
now we are able to create select-options for a single field using wdr_select_options componet usage.
how can we achive this select-options feature for multiple fields.
Could anyone please suggest solutions?
and if possible send me the sample code for this requirement.
Thanks in Advance for your replies.
Regards,
Shyam

Hi,
Nothing different for more fields, same. some declaration changes.
For example code i am using.. in WDDOINIT method.
TYPES:
    fiscal_year TYPE RANGE OF GJAHR,
    S_KUNNR TYPE RANGE OF J_3RS_KUNNR,
    S_VKORG TYPE RANGE OF VKORG_RAN,
    status type PVWTY-RETPA,
    ty_r_date TYPE RANGE OF s_date,
    ty_s_date TYPE LINE OF ty_r_date.
DATA lo_interfacecontroller TYPE REF TO iwci_wdr_select_options .
DATA lo_cmp_usage TYPE REF TO if_wd_component_usage.
lo_cmp_usage =   wd_this->wd_cpuse_cmp_sel_opt( ).
IF lo_cmp_usage->has_active_component( ) IS INITIAL.
lo_cmp_usage->create_component( ).
ENDIF.
* Reference variable used instantiate the select-options component
DATA
    lr_cmp_usage TYPE REF TO if_wd_component_usage.
* Variables used to create the select-options fields and
* define its initial values
DATA:
    lr_field TYPE REF TO data,
    ls_date TYPE ty_s_date.
FIELD-SYMBOLS:
    <fs_field> TYPE ANY,
    <fs_range> TYPE INDEX TABLE.
* Instantiate the select-options component
lr_cmp_usage = wd_this->wd_cpuse_cmp_sel_opt( ).
IF lr_cmp_usage->has_active_component( ) IS INITIAL.
    lr_cmp_usage->create_component( ).
ENDIF.
lo_interfacecontroller =   wd_this->wd_cpifc_cmp_sel_opt( ).
wd_this->m_sel_opt = lo_interfacecontroller->init_selection_screen( ).
data : vhelp type wdy_md_value_help_mode_enum .
* Sets the helper reference
wd_this->m_sel_opt1 = wd_this->wd_cpifc_cmp_sel_opt( ).
wd_this->m_helper = wd_this->m_sel_opt1->init_selection_screen( ).
* Hide the standard select-options components.
wd_this->m_helper->set_global_options(
    i_display_btn_cancel = abap_false
    i_display_btn_check = abap_false
    i_display_btn_reset = abap_false
    i_display_btn_execute = abap_false
lr_field = wd_this->m_helper->create_range_table( `KUNNR` ).
wd_this->m_helper->add_selection_field(
    i_id           = `KUNNR`
    I_DESCRIPTION = 'Customer Code'
*    i_within_block = `BL01`
    it_result      = lr_field ).
FREE lr_field.
lr_field = wd_this->m_helper->create_range_table( `VKORG` ).
wd_this->m_helper->add_selection_field(
    i_id           = `VKORG`
    I_DESCRIPTION = 'Sales Organization'
*    i_within_block = `BL01`
    it_result      = lr_field ).
FREE lr_field.
Go through this..
http://wiki.sdn.sap.com/wiki/display/Snippets/WebDynproABAP-Complexselect-optionscomponent+usages
Cheers,
Kris.

Select-options for OO Methods

Hi all,
How can I define select-options for a method in a global class.
And how can I pass these select-options from a report.
Thanks & Regards
Eshwar

Hi all,
How can I define select-options for a method in a global class.
And how can I pass these select-options from a report.
Thanks & Regards
Eshwar

Problem in passing select-options to class meathods , type any table

<h1>how to pass type any table to class meathod</h1>
<h3>hi all
       i'm trying to build class to validate the selection screen , like select-options and parameters
       while writing meathod to validate the select-options
       its throwing parameter mismath error</h3>
<h4>i tried like made import parameter in class meathod as 'TYPE ANY TABLE' and tried to pass select-options from my program it is saying type mismatch , how to overcome this problem </h4>
<h4>and i want to pass any select option , either of type lfa1-lifnr or mara-matnr or any other</h4>
Moderator message : Don't shout, use proper font size for explaining the question. This has been discussed in ABAP forums before. Search for available information. Thread locked.
Edited by: Vinod Kumar on Sep 14, 2011 11:20 AM

hI
Triggering and Handling events
At the moment of implementation, a class defines its:
         Instance events (using the EVENTS statement)
        Static events (using the CLASS-EVENTS statement)
Classes or their instances that receive a message when an event is triggered at runtime and want to react to this event define event handler methods. Statement: METHODS
CLASS IC1_VEICHLE DEFINATION.
PUBLIC SECTION.
METHOD CONSTRUCTOR IMPORTING
EVENTS VEICHEL_CREATION.
ENDCLASS
CLASS LC1_VEICHLE IMPLIMENTATION.
METHOD CONSTRUCTOR
RAISE EVENT VEICHLE_CREATION.
REWARD IF USEFULL

How to pass select-option filed to Function Module Exporting Parameter

Hi,
    How to pass select-option filed to Function Module Exporting Parameter.
Thanks

Hi,
DATA: BEGIN OF ITAB5_WRK OCCURS 0,
        KUNNR     TYPE KNKK-KUNNR, "CUSTOMER #
        SBGRP     TYPE KNKK-SBGRP, "CREDIT REP
        KLIMK     TYPE KNKK-KLIMK, "CREDIT LIMIT
        NAME1     TYPE KNA1-NAME1, "CUSTOMER NAME
        SKFOR     TYPE KNKK-SKFOR, "TOTAL A/R
        AMT1      TYPE KNKK-SKFOR, "CURRENT
        AMT2      TYPE KNKK-SKFOR,                          "01-30
        AMT3      TYPE KNKK-SKFOR,                          "31-60
        AMT4      TYPE KNKK-SKFOR,                          "61-90
        AMT5      TYPE KNKK-SKFOR,                          "91-120
        AMT6      TYPE KNKK-SKFOR,                          "OVR 120
        BZIRK     TYPE KNVV-BZIRK,
      END OF ITAB5_WRK.
SELECT-OPTIONS P_COMP     FOR T001-BUKRS
SELECT KUNNR SBGRP FROM KNKK
         INTO TABLE ITAB5_WRK
         WHERE SBGRP IN P_REP
           AND KUNNR GE '0001000000'
           AND SKFOR NE 0.
LOOP AT ITAB5_WRK.
    DELETE ADJACENT DUPLICATES FROM ITAB5_WRK COMPARING KUNNR.
ENDLOOP.
PERFORM GET_CREDIT_LIMITS.
*=======================================================================
IF P_DIST NE SPACE.
    LOOP AT ITAB5_WRK.
      SELECT SINGLE * FROM KNVV WHERE KUNNR EQ ITAB5_WRK-KUNNR
                                  AND VKORG EQ P_COMP
                                  AND VTWEG EQ '20'
                                  AND SPART EQ '10'
                                  AND BZIRK IN P_DIST.
      IF SY-SUBRC EQ 0.
        MOVE KNVV-BZIRK TO ITAB5_WRK-BZIRK.
        MODIFY ITAB5_WRK.
      ELSE.
        DELETE ITAB5_WRK.
      ENDIF.
    ENDLOOP.
ENDIF.
*==============================================================
LOOP AT ITAB5_WRK.
    MOVE: 'F/S'            TO WRK-KKBER,
           ITAB5_WRK-KUNNR TO WRK-KUNNR.
    PERFORM AGING.
    ADD: W_SNFAE TO ITAB5_WRK-AMT1,
         W_SFAE1 TO ITAB5_WRK-AMT2,
         W_SFAE2 TO ITAB5_WRK-AMT3,
         W_SFAE3 TO ITAB5_WRK-AMT4,
         W_SFAE4 TO ITAB5_WRK-AMT5,
         W_SFAE5 TO ITAB5_WRK-AMT6,
         W_SFAEL TO ITAB5_WRK-SKFOR,
         W_SNFAE TO ITAB5_WRK-SKFOR.
    MOVE: 'SPEC'            TO WRK-KKBER,
           ITAB5_WRK-KUNNR TO WRK-KUNNR.
    *PERFORM AGING.*
    ADD: W_SNFAE TO ITAB5_WRK-AMT1,
         W_SFAE1 TO ITAB5_WRK-AMT2,
         W_SFAE2 TO ITAB5_WRK-AMT3,
         W_SFAE3 TO ITAB5_WRK-AMT4,
         W_SFAE4 TO ITAB5_WRK-AMT5,
         W_SFAE5 TO ITAB5_WRK-AMT6,
         W_SFAEL TO ITAB5_WRK-SKFOR,
         W_SNFAE TO ITAB5_WRK-SKFOR.
    MODIFY ITAB5_WRK.
ENDLOOP.
FORM AGING.
*CALL FUNCTION 'CUSTOMER_DUE_DATE_ANALYSIS'*
EXPORTING
      BUKRS             = P_COMP
      KKBER             = WRK-KKBER
      KUNNR             = WRK-KUNNR
      RASID             = 'FEND'
      KLIMP             = 'X'
    IMPORTING
      SFAE1             = W_SFAE1
      SFAE2             = W_SFAE2
      SFAE3             = W_SFAE3
      SFAE4             = W_SFAE4
      SFAE5             = W_SFAE5
      SFAE6             = W_SFAE6
      SFAEL             = W_SFAEL
      SNFA1             = W_SNFA1
      SNFA2             = W_SNFA2
      SNFA3             = W_SNFA3
      SNFA4             = W_SNFA4
      SNFA5             = W_SNFA5
      SNFA6             = W_SNFA6
      SNFAE             = W_SNFAE
    EXCEPTIONS
      NO-AGING_SCHEDULE = 1
      NO_TABLE_INPUT    = 2.
CASE SY-SUBRC.
    WHEN 1.
      MESSAGE E999 WITH 'PLEASE ENTER AGING SCHEDULE'.
    WHEN 2.
      MESSAGE E999 WITH 'DO NOTHING ??'.
ENDCASE.
ENDFORM.                    "AGING
Thanks

How to create select-options for 3 fields out of 5 by FREE_SELECTIONS_INIT

Hi Experts,
I am using the Function Modules FREE_SELECTIONS_INIT and FREE_SELECTIONS_DIALOG to create the select-options dynamically on the selection screen.
My problem is that I am passing a field list of 10 fields in the FIELDS_TAB of the function.
Now it creates the select-options for all 10 fields. I want to create select-options for only 5 fields initially and let the user select out of the remaining 5 fields to create the select-options.
How to achieve this.?
I tried by passing the 5 fields in FIELDS_NOT_SELECTED table but they get hidden and once hidden I am not able to get them back in my field list.
Please help me out.
Useful answers will be suitably rewarded.
Thanks in advance.
Regards,
Himanshu

Hi Experts,
I am using the Function Modules FREE_SELECTIONS_INIT and FREE_SELECTIONS_DIALOG to create the select-options dynamically on the selection screen.
My problem is that I am passing a field list of 10 fields in the FIELDS_TAB of the function.
Now it creates the select-options for all 10 fields. I want to create select-options for only 5 fields initially and let the user select out of the remaining 5 fields to create the select-options.
How to achieve this.?
I tried by passing the 5 fields in FIELDS_NOT_SELECTED table but they get hidden and once hidden I am not able to get them back in my field list.
Please help me out.
Useful answers will be suitably rewarded.
Thanks in advance.
Regards,
Himanshu

HOW TO PASS SELECT-OPTIONS AS IMPORT PARAMETER TO A CLASS

Hi experts,how to pass select options value as a export parameters to a zclass.
can give me some idea.
Thanks
sai

As Sachin already said, selection options are stored in an internal table. You can reconstruct the table type without the corresponding input fields using the type addition RANGE OF.
So - assuming you have the following in your program:
DATA: wa TYPE sflight.
SELECT-OPTIONS so_car FOR sflight-carrid.
you can create a publically-visible type in your class using direct type entry and the code
TYPES: my_selectoption TYPE RANGE OF sflight-carrid.
and use this to define the importing parameter of the method.
The only other thing you have to remember is that select-options generates an internal table with header line. Thereore, to pass the table to the method, you would use (in the above example) so_car[], and not just the name of the select-option.
Hope this helps.
Regards
Jon.

Passing SELECT-OPTIONS value to Function Module

Hi,
I need to pass select-options value to a function module.
Code is like the following:
SELECT-OPTIONS seltab FOR object-type.
CALL FUNCTION 'Z_MY_FM'
      EXPORTING
        sel_tab         = seltab
     IMPORTING
        result_tab     = it_result
I have found a similar problem in the SDN forum: How to pass select-options parameter to FM?
However, that could not help me much in solving my problem.
So far I have tried to created a structure in DDIC with the following components for the select-options:
SIGN - BAPISIGN
OPTION - BAPIOPTION
LOW - ZBWOBJECTTYPE (my type)
HIGH - ZBWOBJECTTYPE (my type)
and subsequently a table type for this structure which is specified in the "Import" tab of my function module.
Unfortunately, when I ran the program a runtime exception occured (CALL_FUNCTION_CONFLICT_TYPE).
Could anyone please help me on this issue?
Thanks in advance.
Regards,
Joon Meng

Hello Joon,
CALL FUNCTION 'Z_MY_FM'
      EXPORTING
        sel_tab         = seltab
     IMPORTING
        result_tab     = it_result
You have defined SELTAB as a SELECT-OPTION.
So when you pass only SELTAB, the header line is transferred to the FM. When you pass SELTAB[] the whole table(range) is passed.
It is similar to the concept of an internal table with header line.
Hope i am clear.
Anyways how have you defined result_tab and sel_tab ?
BR,
Suhas

Passing select-options to method of class

Hai friends,
         Could u please tell me how to pass select-options as parameters to method of a class.

Hi
You have to declare the select
options like
<b>DATA: l_kunnr TYPE STANDARD TABLE OF wselkunnr,</b>
see this example
*& Report ZCL_TEST_ANJI
REPORT zcl_test_anji.
TABLES kna1.
DATA: l_kunnr TYPE STANDARD TABLE OF wselkunnr,
      l_kna1 TYPE STANDARD TABLE OF kna1,
      l_sales TYPE STANDARD TABLE OF vbak,
      l_cust TYPE kna1,
      l_vbak TYPE vbak.
DATA: obj_cust TYPE REF TO zcl_test_anji.
SELECT-OPTIONS: s_kunnr FOR kna1-kunnr.
Start of Selection
START-OF-SELECTION.
CREATE OBJECT obj_cust.
SET HANDLER obj_cust->event_handler_1 FOR obj_cust.
SET HANDLER obj_cust->event_handler_2 FOR obj_cust.
l_kunnr[] = s_kunnr[].
CALL METHOD obj_cust->zcust
    EXPORTING
      s_cust = l_kunnr
    RECEIVING
      it_kna1 = l_kna1.
IF NOT l_kna1[] IS INITIAL.
    LOOP AT l_kna1 INTO l_cust.
      WRITE: / l_cust-kunnr, 12 l_cust-name1,
            48 l_cust-ort01, 85 l_cust-land1,
            95 l_cust-pstlz.
      HIDE l_cust-kunnr.
    ENDLOOP.
ENDIF.
At line Selection
AT LINE-SELECTION.
CASE sy-lsind.
    WHEN 1.
      CALL METHOD obj_cust->zso
        EXPORTING
          im_kunnr = l_cust-kunnr
        RECEIVING
          it_so    = l_sales.
      IF NOT l_sales[] IS INITIAL.
        LOOP AT l_sales INTO l_vbak.
          WRITE: / l_vbak-kunnr, 12 l_vbak-vbeln,
                24 l_vbak-vkorg, 30 l_vbak-audat,
                43 l_vbak-netwr.
        ENDLOOP.
      ENDIF.
ENDCASE.
<b>Reward points if useful</b>
Regards
Anji

Passing select-options values using call transaction method

Hi Experts,
I have a scenario in which i have three fields BUKRS,WERKS and MATKL in an internal table i_tab and I have MATNR as a selection-option.
After this I have to use call transaction <tcode> for all the line items in the internal table and the MATNR select-option values I have to pass directly for each line of i_tab using call transaction method.
TYPES: BEGIN OF t_tab,
          bukrs TYPE bukrs,
          werks TYPE werks_d,
          matkl TYPE matkl,
        END OF t_tab.
DATA: w_tab TYPE t_tab,
            i_tab      TYPE STANDARD TABLE OF t_tab.
SELECT-OPTIONS: s_matnr FOR marc-matnr.
Now I am putting a loop at i_tab and have to use CALL TRANSACTION <TCODE> for each line with the SELECT-OPTIONS for MATNR.
Please tell me whether we can pass multiple ranges for MATNR using call transcation method.
for example there can be multiple single values/multiple ranges/excluded ranges for MATNR. so please suggest me how tho achieve this sceanrio using CALL transaction method of BDC.
Thanks a lot.
Regards,
Krishan

Hi Krishan,
For the Call transaction TCODE there is extension ....OPTIONS from OPT. Just Check it out. I think it is possible like this.
... OPTIONS FROM opt
*Effect*
This addition gives you control using the values of the components of the structure opt, which must be of the Dictionary type CTU_PARAMS. The components have the following meaning:
DISMODE
Processing mode (comparable with the MODE addition)
UPDMODE
Update mode (comparable with the UPDATE addition)
CATTMODE
CATT mode (controlling a CATT procedure)
The CATT mode can have the following values:
' ' No CATT procedure active
'N' CATT procedure without single screen control
'A' CATT procedure with single screen control
DEFSIZE
Use standard window size
RACOMMIT
COMMIT WORK does not end CATT procedure
NOBINPT
No batch input mode, that s SY-BINPT = SPACE.
NOBIEND
No batch input mode after BDC data has been read
The components DEFSIZE , RACOMMIT, NOBINPT, NOBIEND always take the following values:
'X' Yes
' ' No
If the OPTIONS addition is omitted, the following settings are valid for the control parameters:
DISMODE from the MODE addition
UPDMODE
from the UPDATE addition
CATTMODE
No CATT procedure active
DEFSIZE
Do not use standard window size
RACOMMIT
COMMIT WORK ends procedure successfully
NOBINPT
Batch input mode, that is SY-BINPT =X.
NOBIEND
Batch input mode also active after BDC data has been read
Regards,
Swapna.

Passing select-options value in method

How to pass select-options value in method ?
Example:
Select-options: carrid for spfli-carrid.
class cl_myclass implementation.
select carrid connid from
spfli where carrid in carrid.
endclass.
Thanks

Hello Anee
The coding of this functionality is quite simple:
REPORT zmy_report.
DATA: go_myclass   TYPE REF TO zcl_myclass,
           gd_repid         TYPE syst-repid.
PARAMETERS:
p_bukrs   ...
SELECT-OPTIONS:
o_kunnr ...
START-OF-SELECTION.
gd_repid = syst-repid.
CREATE OBJECT go_myclass
    EXPORTING
      id_calling_program = gd_repid.
And that's how your CONSTRUCTOR method should look like:
METHOD constructor. " IMPORTING parameter id_calling_program
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
    CURR_REPORT = id_calling_report
TABLES
    SELECTION_TABLE = me->mt_selopts.
" NOTE: define mt_selopts as instance attribute of table type RSPARAMS_TT
ENDMETHOD.
Finally you have to extract the parameter and select-options from MT_SELOPTS.
Regards
Uwe

How to Pass Select-options Single values as Parameter value to Method ?

Hi Friends,
I need to pass select-options values(single values) for s_arbpl to the method "process_percent_planned". Now all single values are in internal table s_arbpl-low field. I need to pass this internal table(s_arbpl-low) values to the method where i will run query based on these single values.In my below code i am passing value through variable w_arbpl. I have defined this parameter in the method.But here only one value is passed to method. I want multiple single values (in s_arbpl-low) should be passed. Please let me know how to correct code.
Tables: crhd.
Data: ktext type auftext,
w_arbpl type arbpl.
select-options: s_arbpl for crhd-arbpl.
ktext = 'Test'
create object obj_plan.
call method obj_plan->process_percent_planned
exporting
ktext = ktext
w_arbpl = s_arbpl-low.
Thanks

hi ,
when you want to pass S_ARBPL AS PARAMETER IN SELEC OPTION
ARBPL SUCH AS
   WIN002
WIN003
WIN004
WIN005
WIN006
WIN007
IN MULTIPLE SELECTION S_ARBPL
THEN
USE
Tables: crhd.
Data: ktext type auftext,
w_arbpl type arbpl.
select-options: s_arbpl for crhd-arbpl.
ktext = 'Test'
LOOP AT S_ARBPL .
create object obj_plan.
call method obj_plan->process_percent_planned
exporting
ktext = ktext
w_arbpl = s_arbpl-low.
ENDLOOP.
REGARDS
dEEPAK .
   THEN SELECT THAT
call method obj_plan->process_percent_planned
exporting
ktext = ktext
w_arbpl = s_arbpl-low.

Passing Select option to the sub routine

Hi All ,
how can we pass select option values to a subroutine ,
Thanks in Advance
Vinay

Hi Vinay Kolla,
Check out this.
TYPES: TYP_DATUM TYPE RANGE OF SY-DATUM.
DATA: WA_DATUM   TYPE LINE OF TYP_DATUM.
SELECT-OPTIONS : S_DATUM FOR SY-DATUM.
START-OF-SELECTION.
PERFORM WRITE_DATUM TABLES S_DATUM[].
*&      Form write_datum
*       text
*      -->P_S_DATUM text
FORM WRITE_DATUM TABLES P_S_DATUM TYPE TYP_DATUM.
LOOP AT P_S_DATUM INTO WA_DATUM.
    WRITE : /10 WA_DATUM-SIGN,
                WA_DATUM-OPTION,
                WA_DATUM-LOW,
                WA_DATUM-HIGH.
ENDLOOP.
ENDFORM.
Regards,
R.Nagarajan.
We can -

Passing select options through subroutines

Hi
how do you pass select option values through subroutines?

Hello,
Is this what you are looking for:
TYPES: ty_r_bukrs TYPE RANGE OF bukrs.
DATA:
      v_date TYPE datum,
      v_bukrs TYPE bukrs.
SELECT-OPTIONS:
s_bukrs FOR v_bukrs OBLIGATORY,
s_date FOR v_date.
AT SELECTION-SCREEN.
PERFORM f_check_cocd
USING s_bukrs[].
*&      Form f_check_cocd
*       Check Comp. Code
FORM f_check_cocd
USING fp_s_bukrs TYPE ty_r_bukrs.
DATA: l_v_bukrs TYPE bukrs.
SELECT bukrs UP TO 1 ROWS
FROM t001
INTO l_v_bukrs
WHERE bukrs IN s_bukrs.
ENDSELECT.
IF sy-subrc <> 0.
*   Throw Error Message
ENDIF.
ENDFORM.                    " f_check_cocd
BR,
Suhas

Passing select options for component usage

Similar Messages

Maybe you are looking for