Passing the Dynamic Internal Table as the Output Parameter of the FM...
Hi,
How can we pass the internal table as the output from the Function Module TABLES parameter.
SELECT * FROM TVRO BYPASSING BUFFER INTO TABLE <ltable>.
Now I need to pass the dynamic internal table <ltable> as the output in the function module.
Thanks!
Puneet.
I can't use TVRO as the table type. The Table name is as the Input. This program will download the contents of the table and create an app server file. It can be for any database table.
so i want the output of this FM should be the data from that table. So what should be the TABLE type.
like in a program i will use:::
FIELD-SYMBOLS: <ltable> TYPE ANY TABLE,
<l_line> TYPE ANY,
<l_field> TYPE ANY.
SELECT * FROM (p_table) BYPASSING BUFFER INTO TABLE <ltable>.
That is my requirement.
Similar Messages
-
How to Organize the columns in the dynamic internal table?
Hello Folks!
How to Organize the columns in the dynamic internal table? i tried passing the parameter COL_POS to the fieldcatalog, Which is not working.Organize in What order ? What is your way to output ?
If you use ALV, you need to create fresh FIELD CATALOG for your dynamic table and then assign the column position.
Regards,
Diwakar -
It cannot reference the dynamic internal table in memory as an object.
Hi,
I am getting the syntax error in the second select. I guest it cannot reference the dynamic internal table in memory as an object.
The internal table contains different fields from multiple tables and it gets created OK. Then the first select within the loop executes OK allowing me to read the multiple tables in ITABLES.
* Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = ifc
IMPORTING
ep_table = dy_table.
***OK, the dynamic tables is created here
assign dy_table->* to <dyn_table>.
* Create dynamic work area and assign to FS
create data dy_line like line of <dyn_table>.
assign dy_line->* to <dyn_wa>.
loop at ITABLES.
***OK, no syntax errors in this select here
select * appending corresponding fields of table <dyn_table>
from (ITABLES-TABNAME).
endloop.
data: ikonp like konp occurs 0 with header line.
***NOT OK, there is syntax errors
select * into table ikonp
from KONP for all entries in <dyn_table>
where knumh = <dyn_table>-knumh.
Some of the tables in ITABLES are pooled tables which does not allow me to use INNER JOINS. Therefore I need a second select in order to read the pricing table KONP.
Thanks in advance for any hint.Hi Abel,
You must be getting the syntax error that <dyn_table> does not contain the field knumh.
try putiing the entire where clause in a char type variable say wa_char and then use in ur query as
where (wa_char) .. it may work..
concatenate 'knumh' '=' '<dyn_table>-knumh' INTO wa_char SEPARATED BY SPACES.
SELECT ... from konp...
where (wa_char).
Revert if it doesnt work. -
Dynamic internal table for ALV output
Hi,
I am looking for a simple & efficient sample code for an ALV report output with dynamic columns. Can someone please help!
Thanks,
JSHere is a small example. This is pretty old code, and it uses the FM approach.
report zrich_0001.
type-pools: slis.
field-symbols: <dyn_table> type standard table,
<dyn_wa>.
data: it_alvfc type slis_t_fieldcat_alv,
wa_alvfc type slis_fieldcat_alv,
it_fldcat type lvc_t_fcat,
wa_fldcat type lvc_s_fcat.
selection-screen begin of block b1 with frame title text-001.
parameters: p_flds(5) type c.
selection-screen end of block b1.
start-of-selection.
* build the dynamic internal table
perform build_dyn_itab.
* write 5 records to the alv grid
do 5 times.
perform build_report.
enddo.
* call the alv grid.
perform call_alv.
* Build_dyn_itab
form build_dyn_itab.
* Create the dynamic internal table
data: new_table type ref to data,
new_line type ref to data.
* Create fields .
do p_flds times.
clear wa_fldcat.
wa_fldcat-fieldname = sy-index.
wa_fldcat-datatype = 'CHAR'.
wa_fldcat-intlen = 5.
append wa_fldcat to it_fldcat .
enddo.
* Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = it_fldcat
importing
ep_table = new_table.
assign new_table->* to <dyn_table>.
* Create dynamic work area and assign to FS
create data new_line like line of <dyn_table>.
assign new_line->* to <dyn_wa>.
endform.
Have to split this code into two postings to keep formatting.
Regards,
Rich Heilman
Edited by: Rich Heilman on Jun 23, 2009 11:59 AM -
Add column in the dynamic internal table
Hi Experts,
I have a dynamic internal table. I need add new column in the internal table and I don´t Know.
My code:
DATA: it_generic TYPE REF TO Data,
wa_generic TYPE REF TO data.
FIELD-SYMBOLS: <table> TYPE ANY TABLE,
<wa> TYPE ANY,
<field> TYPE ANY.
CREATE DATA it_generic TYPE STANDARD TABLE OF (wa_datoscarga-ZTBLCAR).
CREATE DATA wa_generic TYPE (wa_datoscarga-ZTBLCAR).
ASSIGN it_generic->* TO <table>.
CHECK <table> IS ASSIGNED.
ASSIGN wa_generic->* TO <wa>.
CHECK <wa> IS ASSIGNED.
SELECT *
INTO CORRESPONDING FIELDS OF TABLE <table>
FROM (wa_datoscarga-ZTBLCAR)
WHERE bukrs EQ p_bukrs AND
z_petic EQ z_peticion AND
ZIDFASE eq 'E'.
After this I need add one column selection at the first position of the columns.
ThanksHi,
Please refer to the below link for the code snippet on how to create a dynamic internal table -
[Create a dynamic internal table.|http://www.divulgesap.com/blog.php?p=MjE=]
Cheers,
Ravi -
Passing the dynamic internal tables to the calling program
Hello,
From my user exit USEREXIT_MOVE_FIELD_TO_VBAP in program MV45AFZZ I am calling a routine to build dynamically an internal table. I get A DUMP in the perform statement. Please see below.
*FORM USEREXIT_MOVE_FIELD_TO_VBAP.*
*Global declarations
RANGES: KSCHL FOR A605-KSCHL,
KUNNR FOR A605-KUNNR,
MATNR FOR A605-MATNR.
field-symbols: <dyn_table> type standard table,
<dyn_wa>,
<dyn_field>.
*Internal tables and work areas
data: dy_table type ref to data,
dy_line type ref to data,
xfc type lvc_s_fcat,
ifc type lvc_t_fcat.
KSCHL-sign = 'I'.
KSCHL-option = 'EQ'.
KSCHL-low = 'ZB00'.
APPEND KSCHL.
if not vbap-matnr is initial.
MATNR-sign = 'I'.
MATNR-option = 'EQ'.
MATNR-low = vbap-matnr.
APPEND MATNR.
endif.
if not vbak-kunnr is initial.
KUNNR-sign = 'I'.
KUNNR-option = 'EQ'.
KUNNR-low = vbak-kunnr.
APPEND KUNNR.
endif.
perform get_data(ZSD_CARRIER_SELECTION)
TABLES KAPPL
KSCHL
KUNNR
MATNR
CHANGING <dyn_table>.
*ENDFORM.*
*Then in program ZSD_CARRIER_SELECTION*
*Global declarations
RANGES: KSCHL FOR A605-KSCHL,
KUNNR FOR A605-KUNNR,
MATNR FOR A605-MATNR.
field-symbols: <dyn_table> type standard table,
<dyn_wa>,
<dyn_field>.
*Internal tables and work areas
data: dy_table type ref to data,
dy_line type ref to data,
xfc type lvc_s_fcat,
ifc type lvc_t_fcat.
*FORM get_data CHANGING dyn_table.*
select single * into w_t685
from t685 where KSCHL eq P_KSCHL
and KOZGF ne space.
select * into table i_T682I
from T682I where KVEWE = w_t685-KVEWE
and KAPPL = w_t685-KAPPL
and KOZGF = w_t685-KOZGF.
loop at i_T682I into W_T682I.
CONCATENATE 'A' W_T682I-KOTABNR INTO w_dd02l-TABNAME.
itables-TABNAME = w_dd02l-TABNAME.
collect itables.
endloop.
loop at itables.
perform get_structure tables ifc
using itables-TABNAME.
endloop.
loop at ifc into xfc where key = 'X'.
clear i_fields.
i_fields-FIELDNAME = xfc-fieldname.
i_fields-sign = 'I'.
i_fields-option = 'EQ'.
if xfc-fieldname = 'KSCHL'.
i_fields-low = 'ZB00'.
endif.
append i_fields.
endloop.
call method cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = ifc
IMPORTING
ep_table = dy_table.
assign dy_table->* to <dyn_table>.
create data dy_line like line of <dyn_table>.
assign dy_line->* to <dyn_wa>.
*ENDFORM.*
*FORM get_structure tables ifc type LVC_T_FCAT*
*using TABNAME.*
data : idetails type abap_compdescr_tab,
xdetails type abap_compdescr.
data : ref_table_des type ref to cl_abap_structdescr.
* Get the structure of the table.
ref_table_des ?=
cl_abap_typedescr=>describe_by_name( TABNAME ).
idetails[] = ref_table_des->components[].
select * into table i_dd03l
from dd03l where tabname = tabname.
sort i_dd03l by fieldname.
loop at idetails into xdetails.
clear xfc.
xfc-fieldname = xdetails-name .
xfc-datatype = xdetails-type_kind.
xfc-inttype = xdetails-type_kind.
xfc-intlen = xdetails-length.
xfc-decimals = xdetails-decimals.
read table i_dd03l with key fieldname = xfc-fieldname
KEYFLAG = 'X'.
if sy-subrc = 0.
xfc-key = 'X'.
endif.
collect xfc into ifc.
endloop.
*ENFORM. "get_structure*
Thanks in advance.
Please use code tags in the future when pasting code.
Edited by: Rob Burbank on Mar 2, 2009 4:29 PMHi,
In the calling program whereyou are calling the subroutine...
perform get_data(ZSD_CARRIER_SELECTION)
TABLES KAPPL
KSCHL
KUNNR
MATNR
CHANGING <dyn_table>.
you have made use of field symbol <dyn_table> which you have not assigned.... due to which you are getting a dump....
so before the call you have to assign this field symbol and then use it in the call...
just assing to some dummy type and then you pass it using changing...
later on in the called program you can unassign the field-symbol as soon as you enter in the subroutine.
data itab type standard table of scarr.
assign itab to <dyn_table>.
perform get_data(ZSD_CARRIER_SELECTION)
TABLES KAPPL
KSCHL
KUNNR
MATNR
CHANGING <dyn_table>.
even if this does not solve your problem try debugging and check at which line it is going for a dump... so that it gives a clear idea where exactly is the fault
Regards,
Siddarth -
Issue in populating the dynamic internal table in SMARTFORMS
Hi Experts,
My requirement is I have a table in the below format.
Measuring Point
Description of Measuring Point
UOM
Date
Time
Reading
96
POWER GENERATED
kwh
20140501
101837
1.00E+04
96
POWER GENERATED
kwh
20140502
102220
1.00E+04
96
POWER GENERATED
kwh
20140503
104623
1.25E+01
96
POWER GENERATED
kwh
20140504
101111
2.00E+03
98
AUX POWER CONSUME
kwh
20140501
101837
1.00E+05
98
AUX POWER CONSUME
kwh
20140502
102220
1.00E+05
99
NET POWER EXPORTED
kwh
20140501
101837
1.00E+07
99
NET POWER EXPORTED
kwh
20140502
102220
1.00E+07
100
AVG POWER GENERATED
MW
20140501
101837
1.00E+02
100
AVG POWER GENERATED
MW
20140502
102220
1.00E+02
101
AUX POWER CONSUMED(%)
20140501
101837
1.00E+02
101
AUX POWER CONSUMED(%)
20140502
102220
1.01E+01
102
PLANT AVAILABLE HRS
hrs
20140501
101837
1.01E+01
102
PLANT AVAILABLE HRS
hrs
20140502
102220
1.01E+01
103
PLANT RUN HOURS
hrs
20140501
101837
1.01E+01
103
PLANT RUN HOURS
hrs
20140502
102220
1.01E+01
104
PLANT AVAILABLITY FACTOR
20140501
101837
1.00E+02
104
PLANT AVAILABLITY FACTOR
20140502
102220
1.00E+02
which i need to display like below based on the user Requirement for print out.
DATE
POWER GENERATED(96)
AUX POWER CONSUME(98)
NET POWER EXPORTED(99)
AVG POWER GENERATED(100)
AUX POWER CONSUMED(%)(101)
PLANT AVAILABLE HRS(102)
PLANT RUN HOURS(103)
PLANT AVAILABLITY FACTOR(104)
kwh
kwh
kwh
MW
hrs
hrs
01.05.2014
1.00E+04
1.00E+05
1.00E+07
1.00E+02
1.00E+02
1.01E+01
1.01E+01
1.00E+02
02.05.2014
1.00E+04
1.00E+05
1.00E+07
1.00E+02
1.01E+01
1.01E+01
1.01E+01
1.00E+02
03.05.2014
1.25E+01
04.05.2014
2.00E+03
Now the issue is how to assign the values of stops from the internal table to dynamically for a specific date in SMARTFORMS?
Please help me in resolving this issue.Hi,
See if this articale is good for you:
The case of "dynamic columns in smartform"
Regards. -
How to use dynamic internal table when using gui_upload?
Hi Experts,
my scenario is like i have header data, item data and serial numbers.
so with respect to the quantity in unit of measure ,there will be number of serial numbers..
i have declared the dynamic internal table,but i am not getting the logic to change the structure accordingly with respect to the flat file entries..
is it possible to do or its not possible....any suggestion!!!!i have declared like this....
TYPES: BEGIN OF ty_final,
bldat TYPE string, "Document Date
budat TYPE string, "Psting Date
bktxt TYPE string, "Document Header Text
werks TYPE string, "Plant
lgort TYPE string, "Storage Location
matnr TYPE string, "Material Number
erfmg TYPE string, "Quantity in Unit Of Entry
anln1 TYPE string, "Asset Number
anln2 TYPE string, "Asset Subnumber
sernr TYPE string, "serial Number
END OF ty_final.
DATA : it_final TYPE TABLE OF ty_final,
wa_final TYPE ty_final.
FIELD-SYMBOLS : <fs_final> TYPE table.
ASSIGN it_final TO <fs_final>.
after this i called gui upload and passed internal table it_final..
but i have to change the internal table structure dynamically before the upload function.so that it will match with the flat file...
Regards
KarthickThere are at least two approaches you can use to change/generate new dynamic-structured table. Either with [RTTI + RTTS|https://wiki.sdn.sap.com/wiki/display/Snippets/CreatingFlatandComplexInternalTablesDynamicallyusingRTTI] or using [CL_ALV_TABLE_CREATE|http://www.sdn.sap.com/irj/scn/advancedsearch?query=cl_alv_table_create] . In this one just determine fieldcatalog of current table and change it accordingly, then regenarate table.
There are plenty of examples in SCN for this. You should not face difficulties applying this.
Regards
Marcin -
Dynamic Internal Table with the same name
Hey Guys
I have a question.
I know that we can create dynamic internal table taking a struct dynamically.
But I have 2 ques on the same subject.
1. Can we create an internal table based on a type that we have locally declared eg
types: begin of ty_demo.
var1(1) type c,
var2 type p,
end of ty_demo.
2. If an internal table is already declared based on the above type say data: i_tab type standard table of ty_demo.
If i need to enhance the struct of this internal table. Can i do that by dynamically redefining it based on a different structure but keepin the same name i_tab.
In a nut shell I cannot change the name of my itab but I want to enhance the structure.
I Hope I am clear.
Help will be greatly apprcieated.
Thanks
Sameerhai.
we can create an internal table based on a type that we have locally declared, but you have to use data instead of types like.
data: begin of ty_demo.
var1(1) type c,
var2 type p,
end of ty_demo.
check the example notes for dynamic itab .
Dynamic internal table is internal table that we create on the fly with flexible column numbers.
For sample code, please look at this code tutorial. Hopefully it can help you
Check this link:
http://www.****************/Tutorials/ABAP/DynamicInternaltable/DynamicInternalTable.htm
Sample code:
DATA: l_cnt(2) TYPE n,
l_cnt1(3) TYPE n,
l_nam(12),
l_con(18) TYPE c,
l_con1(18) TYPE c,
lf_mat TYPE matnr.
SORT it_bom_expl BY bom_comp bom_mat level.
CLEAR: l_cnt1, <fs_dyn_wa>.
Looping the component internal table
LOOP AT it_bom_expl INTO gf_it_bom_expl.
CLEAR: l_cnt1.
AT NEW bom_comp.
CLEAR: l_cnt, <fs_dyn_wa>, lf_mat.
For every new bom component the material data is moved to
temp material table which will be used for assigning the levels
checking the count
it_mat_temp[] = it_mat[].
Component data is been assigned to the field symbol which is checked
against the field of dynamic internal table and the value of the
component number is been passed to the dynamic internal table field
value.
ASSIGN COMPONENT c_comp_list OF STRUCTURE <fs_dyn_wa> TO
<fs_check>.
<fs_check> = gf_it_bom_expl-bom_comp.
ENDAT.
AT NEW bom_mat.
CLEAR l_con.
ENDAT.
lf_mat = gf_it_bom_expl-bom_mat.
Looping the temp internal table and looping the dynamic internal table
*by reading line by line into workarea, the materialxxn is been assigned
to field symbol which will be checked and used.
LOOP AT it_mat_temp.
l_nam = c_mat.
l_cnt1 = l_cnt1 + 1.
CONCATENATE l_nam l_cnt1 INTO l_nam.
LOOP AT <fs_dyn_table2> ASSIGNING <fs_dyn_wa2>.
ASSIGN COMPONENT l_nam OF STRUCTURE <fs_dyn_wa2> TO <fs_xy>.
ENDLOOP.
IF <fs_xy> = lf_mat.
CLEAR lf_mat.
l_con1 = l_con.
ENDIF.
Checking whether the material exists for a component and if so it is
been assigned to the field symbol which is checked against the field
of dynamic internal table and the level of the component number
against material is been passed to the dynamic internal table field
value.
IF <fs_xy> = gf_it_bom_expl-bom_mat.
ASSIGN COMPONENT l_nam OF STRUCTURE <fs_dyn_wa> TO <fs_check>.
CLEAR l_con.
MOVE gf_it_bom_expl-level TO l_con.
CONCATENATE c_val_l l_con INTO l_con.
CONDENSE l_con NO-GAPS.
IF l_con1 NE space.
CONCATENATE l_con1 l_con INTO l_con SEPARATED BY c_comma.
CLEAR l_con1.
l_cnt = l_cnt - 1.
ENDIF.
<fs_check> = l_con.
l_cnt = l_cnt + 1.
ENDIF.
ENDLOOP.
AT END OF bom_comp.
At end of every new bom component the count is moved to the field
symbol which is checked against the field of dynamic internal table
and the count is been passed to the dynamic internal table field
value.
ASSIGN COMPONENT c_count OF STRUCTURE <fs_dyn_wa> TO <fs_check>.
<fs_check> = l_cnt.
INSERT <fs_dyn_wa> INTO TABLE <fs_dyn_table>.
ENDAT.
ENDLOOP.
regards.
sowjanya.b -
DYNAMIC INTERNAL TABLE CREATION BASED ON THE CONTENT OF ANOTHER INTERNAL TA
Hi All
I need to create an internal table at runtime.
I have a selection screen parameter which is specific to country, Which can take values below
eg:- IT_AREA for Italy(IT)
FR_AREA for France(FR)
IE_AREA for Ireland(IE).....And similary for other countries
Based on the Above parameter, I need to create Internal Table as below
DATA: itab TYPE italy_data Occurs 0.
If I declare as above, Then itab has fields from italy_data. And this internal table i will be sending it to Function Module to get data into it.
My Requirement is to Create the Internal table itab during runtime for tables italy_data OR france_data OR ireland_data based on selection screen parameter. Tables on Country may have different number of fields in it.
Can anyone help me on this??Hi,
Here is a sample code to create a dynamic internal table.
REPORT ytrab03.
TABLES: mara, makt.
TYPE-POOLS: slis.
DATA: it_fcat TYPE slis_t_fieldcat_alv,
is_fcat LIKE LINE OF it_fcat,
ls_layout TYPE slis_layout_alv.
DATA: it_fieldcat TYPE lvc_t_fcat,
is_fieldcat LIKE LINE OF it_fieldcat.
DATA: new_table TYPE REF TO data,
new_line TYPE REF TO data,
ob_cont_alv TYPE REF TO cl_gui_custom_container,
ob_alv TYPE REF TO cl_gui_alv_grid,
vg_campos(255) TYPE c,
i_campos LIKE TABLE OF vg_campos,
vg_campo(30) TYPE c,
vg_tables(60) TYPE c.
DATA: e_params LIKE zutsvga_alv_01.
FIELD-SYMBOLS: <l_table> TYPE table,
<l_line> TYPE ANY,
<l_field> TYPE ANY.
PARAMETERS: p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
is_fcat-fieldname = 'COL01'.
is_fcat-ref_fieldname = 'MATNR'.
is_fcat-ref_tabname = 'MARA'.
APPEND is_fcat TO it_fcat.
is_fcat-fieldname = 'COL02'.
is_fcat-ref_fieldname = 'MAKTX'.
is_fcat-ref_tabname = 'MAKT'.
APPEND is_fcat TO it_fcat.
LOOP AT it_fcat INTO is_fcat.
is_fieldcat-fieldname = is_fcat-fieldname.
is_fieldcat-ref_field = is_fcat-ref_fieldname.
is_fieldcat-ref_table = is_fcat-ref_tabname.
APPEND is_fieldcat TO it_fieldcat.
CONCATENATE is_fieldcat-ref_table is_fieldcat-ref_field
INTO vg_campos SEPARATED BY '~'.
APPEND vg_campos TO i_campos.
ENDLOOP.
*... Create the dynamic internal table
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = new_table.
*... Create a new line
ASSIGN new_table->* TO <l_table>.
CREATE DATA new_line LIKE LINE OF <l_table>.
ASSIGN new_line->* TO <l_line>.
SELECT (i_campos) FROM mara INNER JOIN makt
ON mara~matnr = makt~matnr
UP TO p_max ROWS
INTO TABLE <l_table>.
LOOP AT <l_table> INTO <l_line>.
LOOP AT it_fcat INTO is_fcat.
ASSIGN COMPONENT is_fcat-fieldname
OF STRUCTURE <l_line> TO <l_field>.
IF sy-tabix = 1.
WRITE: /2 <l_field>.
ELSE.
WRITE: <l_field>.
ENDIF.
ENDLOOP.
ENDLOOP.
Regards,
Karuna. -
Passing dynamic internal table into ALV
I have made one ALV report where i had created one button 'GENERATE'. ON CLICKING THIS BUTTON the data in the ALV report is downloaded to excel file.
i have used this:-
CALL METHOD cl_gui_frontend_services=>file_save_dialog
EXPORTING
window_title = l_title
default_extension = 'XLS'
initial_directory = 'C:\'
CHANGING
filename = filename
path = path
fullpath = fullpath
user_action = user_action
EXCEPTIONS
cntl_error = 1
error_no_gui = 2
not_supported_by_gui = 3
OTHERS = 4.
IF sy-subrc <> 0.
EXIT.
ENDIF.
Check which button is pressed
IF user_action <> cl_gui_frontend_services=>action_ok.
EXIT.
ENDIF.
Download error data collected from the internal table
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
filename = fullpath
filetype = 'ASC'
write_field_separator = '#'
codepage = '4103'
write_bom = c_true
CHANGING
data_tab = gi_final
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
not_supported_by_gui = 22
error_no_gui = 23
OTHERS = 24.
If selection is successful
IF sy-subrc EQ 0.
MESSAGE s004 . " File created successfully
ELSE.
MESSAGE i005 . " File is not created successfully
ENDIF.
In the table i have passed the internal table . this is working fine.
<b>But,
The problem is if i want to display the data in diferent layout based on selection screen criteria the data downloaded are same as default layout.
how to pass a dynamic internal table in the
CALL METHOD cl_gui_frontend_services=>gui_download</b>Hi ,
here is the Program for Download
REPORT yrs_download_transport_request.
PARAMETERS:
p_reqest TYPE trkorr OBLIGATORY,
p_folder(255) TYPE c LOWER CASE, p_sepr OBLIGATORY.
DATA:
folder TYPE string,
retval LIKE TABLE OF ddshretval WITH HEADER LINE,
fldvalue LIKE help_info-fldvalue,
transdir TYPE text255,
filename(255),
trfile(20) TYPE c,
datatab TYPE TABLE OF text8192 WITH HEADER LINE,
len TYPE i,
flen TYPE i.
TYPE-POOLS: sabc, stms, trwbo.
INITIALIZATION.
CONCATENATE sy-sysid 'K*' INTO p_reqest.
IF sy-opsys = 'Windows NT'.
p_sepr = ''.
ELSE.
p_sepr = '/'.
ENDIF.
* CALL FUNCTION 'WSAF_BUILD_SEPARATOR'
* IMPORTING
* separator = p_sepr
* EXCEPTIONS
* separator_not_maintained = 1
* wrong_call = 2
* wsaf_config_not_maintained = 3
* OTHERS = 4.
* IF sy-subrc NE 0.
* MESSAGE s001(00)
* WITH
* 'Unable to find out the separator symbol for the system.'(011).
* ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_reqest.
DATA:
tt_system TYPE TABLE OF tmscsys WITH HEADER LINE,
es_selected_request TYPE trwbo_request_header,
es_selected_task TYPE trwbo_request_header,
iv_organizer_type TYPE trwbo_calling_organizer,
is_selection TYPE trwbo_selection.
iv_organizer_type = 'W'. is_selection-reqstatus = 'R'.
CALL FUNCTION 'TR_PRESENT_REQUESTS_SEL_POPUP'
EXPORTING
iv_organizer_type = iv_organizer_type
is_selection = is_selection
IMPORTING
es_selected_request = es_selected_request
es_selected_task = es_selected_task.
p_reqest = es_selected_request-trkorr.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_folder.
DATA: title TYPE string.
title = 'Select target folder'(005).
CALL METHOD cl_gui_frontend_services=>directory_browse
EXPORTING
window_title = title
CHANGING
selected_folder = folder
EXCEPTIONS
cntl_error = 1
error_no_gui = 2
OTHERS = 3.
CALL FUNCTION 'CONTROL_FLUSH'
EXCEPTIONS
cntl_system_error = 1
cntl_error = 2
OTHERS = 3.
p_folder = folder.
AT SELECTION-SCREEN ON p_reqest.
DATA: request_info TYPE stms_wbo_request,
request_infos TYPE stms_wbo_requests.
REFRESH request_infos.
CALL FUNCTION 'TMS_MGR_READ_TRANSPORT_REQUEST'
EXPORTING
iv_request = p_reqest
iv_header_only = 'X'
IMPORTING
et_request_infos = request_infos
EXCEPTIONS
read_config_failed = 1
table_of_requests_is_empty = 2
system_not_available = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CLEAR request_info.
READ TABLE request_infos INTO request_info INDEX 1.
IF sy-subrc NE 0
OR request_info-e070-trkorr IS INITIAL.
MESSAGE e398(00) WITH 'Request'(006) p_reqest 'not found'(007).
ELSEIF request_info-e070-trstatus NE 'R'.
MESSAGE e398(00)
WITH 'You must release request'(008)
request_info-e070-trkorr
'before downloading'(009).
ENDIF.
START-OF-SELECTION.
folder = p_folder.
CONCATENATE p_reqest+3(7) '.' p_reqest(3) INTO trfile.
CALL FUNCTION 'RSPO_R_SAPGPARAM'
EXPORTING
name = 'DIR_TRANS'
IMPORTING
value = transdir
EXCEPTIONS
error = 0
OTHERS = 0.
PERFORM copy_file USING 'cofiles' trfile.
trfile(1) = 'R'.
PERFORM copy_file USING 'data' trfile.
trfile(1) = 'D'.
PERFORM copy_file USING 'data' trfile.
* FORM copy_file *
* --> SUBDIR * * --> FNAME *
FORM copy_file USING subdir fname.
DATA:
auth_filename TYPE authb-filename,
gui_filename TYPE string.
CONCATENATE transdir subdir fname
INTO filename
SEPARATED BY p_sepr.
REFRESH datatab.
CLEAR flen.
auth_filename = filename.
CALL FUNCTION 'AUTHORITY_CHECK_DATASET'
EXPORTING
activity = sabc_act_read
filename = auth_filename
EXCEPTIONS
no_authority = 1
activity_unknown = 2
OTHERS = 3.
IF sy-subrc <> 0.
FORMAT COLOR COL_NEGATIVE.
WRITE: / 'Read access denied. File'(001),
filename.
FORMAT COLOR OFF. EXIT.
ENDIF.
OPEN DATASET filename FOR INPUT IN BINARY MODE.
IF sy-subrc NE 0.
FORMAT COLOR COL_TOTAL.
WRITE: / 'File open error'(010), filename.
FORMAT COLOR OFF. EXIT.
ENDIF.
DO.
CLEAR len.
READ DATASET filename INTO datatab LENGTH len.
flen = flen + len.
IF len > 0. APPEND datatab. ENDIF.
IF sy-subrc NE 0.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET filename.
CONCATENATE p_folder '' fname INTO gui_filename.
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
bin_filesize = flen
filename = gui_filename
filetype = 'BIN'
CHANGING
data_tab = datatab[]
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 24.
IF sy-subrc = 0.
WRITE: / 'File'(002), filename, 'downloaded. Length'(003), flen.
ELSE.
FORMAT COLOR COL_NEGATIVE.
WRITE: / 'File download error. Filename:'(004), filename.
FORMAT COLOR OFF.
ENDIF.
ENDFORM. "copy_file
Reward points if it is usefull....
Girish -
Passing dynamic internal table to FM using RFC
Dear All,
Is it possible to pass a dynamic internal table to a function module using RFC?
If it is possible than how do i achive this?Basically not, RFC enabled FM parameters must be defined by a LIKE or TYPE clause. so you may try to use a prededined SAP type wide enough (e.g. TAB512 ) and map the data in the FM and caller program (in Unicode try to use tools like class CL_ABAP_CONTAINER_UTILITIES to map data between actual internal table record and RFC used itab "container" type)
For examples look at RFC enabled RFC_GET_TABLE_ENTRIES FM, and look for where-used program.
Regards,
Raymond -
To pass internal table data(including subtotal) to dynamic internal table
here i am displaying the dynamic internal table in alv grid.
i followed like this but i am unable to get the subtotal form the internal table.
LOOP AT ITAB1. " assigning <fs_itab1>.
ASSIGN COMPONENT 'RACCT' OF STRUCTURE <DYN_WA> TO <DYN_FIELD>.
<DYN_FIELD> = ITAB1-RACCT.
ASSIGN COMPONENT 'ERGSL' OF STRUCTURE <DYN_WA> TO <DYN_FIELD>.
<DYN_FIELD> = ITAB1-ERGSL.
ASSIGN COMPONENT 'TEXT' OF STRUCTURE <DYN_WA> TO <DYN_FIELD>.
<DYN_FIELD> = ITAB1-TEXT.
I = 4.
CLEAR COMP_ITAB.
LOOP AT COMP_ITAB.
ASSIGN COMPONENT I OF STRUCTURE <DYN_WA> TO <DYN_FIELD>.
LOOP AT ITAB WHERE RACCT = ITAB1-RACCT.
IF ITAB-RBUKRS EQ COMP_ITAB-RBUKRS.
IF ITAB1-RBUKRS EQ COMP_ITAB-RBUKRS.
<DYN_FIELD> = ITAB1-REPVAL.
SUB_TOT = ITAB1-REPVAL.
ELSE.
<DYN_FIELD> = 0.
SUB_TOT = 0.
ENDIF.
ENDLOOP.
I = I + 1.
TOTAL = TOTAL + SUB_TOT.
ENDLOOP.
ASSIGN COMPONENT I OF STRUCTURE <DYN_WA> TO <DYN_FIELD>.
<DYN_FIELD> = TOTAL.
APPEND <DYN_WA> TO <DYN_TABLE>.
CLEAR <DYN_WA>.
TOTAL = 0.
ENDLOOP.
Thanks,
sridhar.Hi Rakesh,
We pass internal tables for the smartform are shown in bold in below code,
CALL FUNCTION LF_FM_NAME
EXPORTING
ARCHIVE_INDEX = TOA_DARA
ARCHIVE_PARAMETERS = ARC_PARAMS
CONTROL_PARAMETERS = LS_CONTROL_PARAM
MAIL_RECIPIENT = LS_RECIPIENT
MAIL_SENDER = LS_SENDER
OUTPUT_OPTIONS = LS_COMPOSER_PARAM
USER_SETTINGS = ' '
ZXEKKO = L_DOC-XEKKO
ZXPEKKO = L_DOC-XPEKKO
ZNAST = NAST
IMPORTING
DOCUMENT_OUTPUT_INFO = IT_DOCUMENT
JOB_OUTPUT_INFO = IT_OUTPUT_INFO
JOB_OUTPUT_OPTIONS = IT_JOB_OUTPUT
<b>TABLES
L_XEKPO = L_DOC-XEKPO[]
L_XEKPA = L_DOC-XEKPA[]
L_XPEKPO = L_DOC-XPEKPO[]
L_XEKET = L_DOC-XEKET[]
L_XTKOMV = L_DOC-XTKOMV[]
L_XEKKN = L_DOC-XEKKN[]
L_XEKEK = L_DOC-XEKEK[]
L_XKOMK = L_XKOMK</b>
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
Regards,
Azaz Ali. -
How 2 create dynamic internal table and can we pass it to gui_download FM
HI all,
How can we create a dynamic internal table?
I have a requirement where i have to create an internal table with the no. of fields depending on the selection screen values, i think tat can be possible though dynamic creation only.
How to solve this issue..?Pointers will be very much useful..
Thanks
Sunny.hi
Follow the code it will help you out....
REPORT YUSMM_TEXT2 .
*TABLES
TABLES: MARA, " General Material Data
MAKT, " Material Descriptions
T002. " Language Keys
* GLOBAL TYPE-POOL
TYPE-POOLS : SLIS.
* GLOBAL TYPES
TYPES: BEGIN OF TP_LANG ,
SPRAS LIKE T002-SPRAS,
LAISO LIKE T002-LAISO,
SRNO(3) TYPE N,
END OF TP_LANG.
TYPES: BEGIN OF TP_MATNR,
MATNR LIKE MARA-MATNR,
BEGRU LIKE MARA-BEGRU,
END OF TP_MATNR.
* DECLARATION FOR GLOBAL INTERNAL TABLES (WITH INCLUDE STRUCTURE)
DATA:GT_MAKT TYPE STANDARD TABLE OF MAKT, "Materialkurztexte,
GT_THEAD TYPE STANDARD TABLE OF THEAD, "SAPscript: Text-Header,
GT_LINETAB TYPE STANDARD TABLE OF TLINE, "SAPscript: Text-Zeilen,
GT_T002 TYPE STANDARD TABLE OF T002. "Language key
DATA: BEGIN OF GV_TEXT_OUTPUT_LINE,
MATNR LIKE MARA-MATNR,
BEGRU LIKE MARA-BEGRU,
MAKTX LIKE MAKT-MAKTX,
LTXT40(1250) TYPE C,
SRNO(3) TYPE N,
SPRAS LIKE T002-SPRAS,
END OF GV_TEXT_OUTPUT_LINE.
DATA: GT_MATNR TYPE STANDARD TABLE OF TP_MATNR,
WA_GT_MATNR TYPE TP_MATNR.
DATA: GT_LANG TYPE STANDARD TABLE OF TP_LANG,
WA_GT_LANG TYPE TP_LANG.
DATA: GT_TEXT_OUTPUT_LINE LIKE STANDARD TABLE OF GV_TEXT_OUTPUT_LINE,
GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
GV_FIELDCAT LIKE LINE OF GT_FIELDCAT,
CT_GT_FIELDCAT_IN LIKE GV_FIELDCAT,
GS_LAYOUT TYPE SLIS_LAYOUT_ALV,
GV_REPID TYPE SY-REPID.
DATA: BEGIN OF GV,
FORMER_ERROR LIKE SY-MARKY, " Fehlermeldung bereits
FILE_OPEN(1), " Flag open file
REC_LENGTH TYPE I, " record length
MATNR TYPE MARA-MATNR, " material
REPID TYPE SYST-REPID,
RETCO TYPE SY-SUBRC,
END OF GV.
DATA: GV_MAKT TYPE MAKT,
GV_T002 TYPE T002,
GV_LANGU TYPE THEAD-TDSPRAS.
* DECLARATION FOR FIELD-SYMBOLS
FIELD-SYMBOLS: <FS_DATA> TYPE REF TO DATA,
<FS_DATA1> TYPE REF TO DATA,
<FS_2> TYPE STANDARD TABLE,
<FS_22> TYPE STANDARD TABLE,
<FS_1>,
<FS_11>,
<F>,
<FA>,
<LWA_LINE_WA>,
<LWA_LINE_WA1>.
DATA: IT_FLDCAT TYPE LVC_T_FCAT.
DATA: T_FLDCAT1 TYPE SLIS_T_FIELDCAT_ALV.
DATA: L_LT TYPE SLIS_LAYOUT_ALV.
DATA: WA_IT_FLDCAT TYPE LVC_S_FCAT.
DATA: WA_IT_FLDCAT1 TYPE SLIS_FIELDCAT_ALV.
DATA: GP_TABLE TYPE REF TO DATA.
DATA: WA_NEWLINE TYPE REF TO DATA.
*DECLARATION FOR CONSTANTS
CONSTANTS:
BEGIN OF GC,
TDID_GRUN TYPE THEAD-TDID VALUE 'GRUN',
TDOBJECT_MAT TYPE THEAD-TDOBJECT VALUE 'MATERIAL',
ON(01) TYPE C VALUE 'X',
YES(01) TYPE C VALUE 'X',
TXT(25) TYPE C VALUE 'MATERIAL DETAILS',
MAT(25) TYPE C VALUE 'MATERIAL NUMBER',
AUT(25) TYPE C VALUE 'AUTHORIZATION GROUP',
FOUND TYPE SY-SUBRC VALUE '00', " Return-Code
RC_OK TYPE SY-SUBRC VALUE '00', " Return-Code
OFF TYPE SY-SUBRC VALUE '00', " return code
FALSE TYPE SY-SUBRC VALUE '00', " boolean
TRUE TYPE SY-SUBRC VALUE '01', " boolean
END OF GC.
* DECLARATION FOR VARIABLES
DATA: V(3) TYPE N,
STR TYPE STRING,
STR1 TYPE STRING,
V_VAR(3) TYPE N,
V_VAR1(3) TYPE N,
V_FIELDNAME(15) TYPE C,
V_CHAR(15) TYPE C,
V_LINES(3) TYPE N,
MAKTEXT LIKE MAKT-MAKTX,
LT_DATA TYPE REF TO DATA,
LT_DATA1 TYPE REF TO DATA,
LWA_LINE TYPE REF TO DATA,
LWA_LINE1 TYPE REF TO DATA.
*SELECTION-SCREEN AND PARAMETERS
SELECTION-SCREEN: BEGIN OF BLOCK A1 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS:
S_MATNR FOR MARA-MATNR, "MATERIAL NUMBER
S_MTART FOR MARA-MTART, "MATERIAL TEXT
S_LANG FOR MAKT-SPRAS. "LANGUAGE
PARAMETER: GP_SIZE TYPE I DEFAULT 200. "DATA LENGTH
SELECTION-SCREEN: END OF BLOCK A1.
* AT SELECTION SCREEN
AT SELECTION-SCREEN.
IF GP_SIZE < 0.
MESSAGE E002(00).
ENDIF.
IF GP_SIZE > 50000.
MESSAGE W130(26) WITH TEXT-004.
SET CURSOR FIELD 'gp_size'.
ENDIF.
* INITIALIZATION
INITIALIZATION.
GV-REPID = SY-REPID.
*START-OF-SELECTION
START-OF-SELECTION.
PERFORM GET_MARA_DATA
TABLES
GT_TEXT_OUTPUT_LINE
USING
S_MATNR[]
S_MTART[]
GP_SIZE
CHANGING
GV-RETCO
PERFORM GET_MAT_TEXT
TABLES
GT_MAKT
GT_TEXT_OUTPUT_LINE
GT_THEAD
GT_LINETAB
USING
GC
GV-RETCO
CHANGING
GV_TEXT_OUTPUT_LINE
GV_MAKT
PERFORM GET_LANG.
PERFORM DYNAMIC_TABLES.
PERFORM POPULATE_FINAL_TABLE.
PERFORM POPULATE_DYNAMIC_TABLE.
* END-OF-SELECTION
END-OF-SELECTION.
PERFORM DATA_OUTPUT.
*& Form get_mara_data
* Materialdaten lesen
* <->ct_gt_text_output_line Ausgabetabelle
* -->it_s_matnr Parameter Materialnummer
* -->it_s_mtart Parameter Materialart
* -->if_gp_size Parameter Anzahl Materialnummern
FORM GET_MARA_DATA TABLES CT_GT_TEXT_OUTPUT_LINE STRUCTURE
GV_TEXT_OUTPUT_LINE
USING IT_S_MATNR LIKE S_MATNR[]
IT_S_MTART LIKE S_MTART[]
IF_GP_SIZE
CHANGING IF_GV-RETCO. "#EC *
* MARA in die Übergabestruktur einlesen
SELECT MATNR BEGRU
FROM MARA UP TO IF_GP_SIZE ROWS
APPENDING CORRESPONDING FIELDS OF TABLE GT_MATNR
WHERE MATNR IN IT_S_MATNR
AND MTART IN IT_S_MTART.
IF_GV-RETCO = SY-SUBRC.
ENDFORM. " get_mara_data
*& Form get_mat_text
* Kurz- und Langtexte zum Material lesen
* <->ct_gt_makt Materialkurztexte
* <->ct_gt_text_output_line Ausgabetabelle
* <->ct_gt_thead Kopftabelle für ALV
* <->ct_gt_linetab Zeilentabelle für ALV
* -->if_gc Globale Konstanten
* <--cf_gv_text_output_line Struktur Ausgabetabelle
* <--cf_gv_makt Struktru Materialkurztexte
FORM GET_MAT_TEXT TABLES CT_GT_MAKT STRUCTURE MAKT
CT_GT_TEXT_OUTPUT_LINE STRUCTURE
GV_TEXT_OUTPUT_LINE
CT_GT_THEAD STRUCTURE THEAD
CT_GT_LINETAB STRUCTURE TLINE
USING
IF_GC LIKE GC
IF_GV-RETCO
CHANGING CF_GV_TEXT_OUTPUT_LINE LIKE
GV_TEXT_OUTPUT_LINE
CF_GV_MAKT LIKE GV_MAKT
DATA: STRG TYPE STRING,
STRG1(1255) TYPE C.
IF IF_GV-RETCO = IF_GC-FOUND.
* Materialkurztexte in alles Sprachen einlesen
SELECT * FROM MAKT APPENDING TABLE CT_GT_MAKT
FOR ALL ENTRIES IN GT_MATNR "ct_gt_text_output_line
WHERE MATNR = GT_MATNR-MATNR " ct_gt_text_output_line-matnr
* Kurztexte in die sprachabhängigen Felder bringen
LOOP AT GT_MATNR INTO WA_GT_MATNR.
LOOP AT CT_GT_MAKT INTO CF_GV_MAKT
WHERE MATNR = WA_GT_MATNR-MATNR.
CF_GV_TEXT_OUTPUT_LINE-MATNR = WA_GT_MATNR-MATNR.
CF_GV_TEXT_OUTPUT_LINE-BEGRU = WA_GT_MATNR-BEGRU.
CF_GV_TEXT_OUTPUT_LINE-MAKTX = CF_GV_MAKT-MAKTX.
CF_GV_TEXT_OUTPUT_LINE-SPRAS = CF_GV_MAKT-SPRAS.
* LANGTEXT
CLEAR CT_GT_THEAD[].
CT_GT_THEAD-TDOBJECT = IF_GC-TDOBJECT_MAT.
CT_GT_THEAD-TDNAME = WA_GT_MATNR-MATNR.
CT_GT_THEAD-TDID = IF_GC-TDID_GRUN.
CT_GT_THEAD-TDSPRAS = CF_GV_MAKT-SPRAS.
CALL FUNCTION 'TEXT_READ'
EXPORTING
I_HEADER = CT_GT_THEAD
I_READONLY = IF_GC-ON
IMPORTING
E_HEADER = CT_GT_THEAD
TABLES
T_LINES = CT_GT_LINETAB[]
EXCEPTIONS
NOTFOUND = 1.
IF SY-SUBRC = IF_GC-FOUND.
LOOP AT CT_GT_LINETAB.
STRG = CT_GT_LINETAB-TDLINE.
IF STRG1 <> ' '.
CONCATENATE STRG1 ';' STRG INTO STRG1.
ELSE.
STRG1 = STRG.
ENDIF.
ENDLOOP.
CF_GV_TEXT_OUTPUT_LINE-LTXT40 = STRG1.
APPEND CF_GV_TEXT_OUTPUT_LINE TO CT_GT_TEXT_OUTPUT_LINE.
CLEAR CF_GV_TEXT_OUTPUT_LINE.
STRG1 = ' '.
ELSE.
APPEND CF_GV_TEXT_OUTPUT_LINE TO CT_GT_TEXT_OUTPUT_LINE.
ENDIF.
ENDLOOP.
ENDLOOP.
ENDIF.
ENDFORM. " get_mat_text
*& Form data_output
* Daten mit ALV ausgeben
* <->ct_GT_FIELDCAT Feldkatalog für ALV
* <->ct_gt_text_output_line Ausgabetabelle
* -->P_GS_LAYOUT Layout für ALV
* -->if_gc Globale Konstanten
* <--cf_GV_REPID Zur Zeit aufgerufener Reportname
* <--cf_gv_fieldcat Struktur Feldkatalog
* <--cf_gv Globale Variablen
FORM DATA_OUTPUT.
PERFORM FIELDCATBUILD.
PERFORM LAYOUT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = GV-REPID
I_CALLBACK_PF_STATUS_SET = 'EVENT_SET_STATUS_01'
I_CALLBACK_USER_COMMAND = 'EVENT_USER_COMMAND'
IS_LAYOUT = L_LT
IT_FIELDCAT = T_FLDCAT1[]
TABLES
T_OUTTAB = <FS_2>
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> GC-FOUND.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " data_output
*& Form fieldcatbuild
* text
* --> p1 text
* <-- p2 text
FORM FIELDCATBUILD. " TABLES ct_gt_fieldcat_in STRUCTURE gv_fieldcat.
LOOP AT IT_FLDCAT INTO WA_IT_FLDCAT.
WA_IT_FLDCAT1-FIELDNAME = WA_IT_FLDCAT-FIELDNAME.
WA_IT_FLDCAT1-TABNAME = WA_IT_FLDCAT-TABNAME.
WA_IT_FLDCAT1-SELTEXT_L = WA_IT_FLDCAT-FIELDNAME.
APPEND WA_IT_FLDCAT1 TO T_FLDCAT1.
CLEAR : WA_IT_FLDCAT,WA_IT_FLDCAT1.
ENDLOOP.
ENDFORM. " fieldcatbuild
* Form event_set_status_01*
FORM EVENT_SET_STATUS_01 USING LT_EXCL TYPE SLIS_T_EXTAB.
SET PF-STATUS 'ABCD' .
ENDFORM. "EVENT_SET_STATUS_01
*& Form Name: event_user_command *
*& Form Desc: For Handling USER_COMMAND *
FORM EVENT_USER_COMMAND USING
IF_UCOMM TYPE SY-UCOMM
IS_SELFIELD TYPE SLIS_SELFIELD.
CASE IF_UCOMM.
WHEN 'DOWNLOAD'.
PERFORM POPULATE_DOWNLOAD_TABLE.
DATA: L_LENGHT TYPE I.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:data.xls'
FILETYPE = 'ASC'
WRITE_FIELD_SEPARATOR = 'X'
TRUNC_TRAILING_BLANKS = 'X'
DAT_MODE = 'X'
IMPORTING
FILELENGTH = L_LENGHT
TABLES
DATA_TAB = <FS_22>.
IF SY-SUBRC <> GC-FOUND.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF L_LENGHT NE GC-FOUND.
MESSAGE S398(00) WITH 'DATA downloaded to c:data.xls'.
ENDIF.
ENDCASE.
ENDFORM. "event_user_command
*& Form get_lang
* text
* --> p1 text
* <-- p2 text
FORM GET_LANG.
SELECT SPRAS
LAISO FROM T002 INTO CORRESPONDING FIELDS OF TABLE GT_LANG
WHERE SPRAS IN S_LANG.
DESCRIBE TABLE GT_LANG LINES V_LINES.
LOOP AT GT_LANG INTO WA_GT_LANG.
V = V + 1.
WA_GT_LANG-SRNO = V.
MODIFY GT_LANG FROM WA_GT_LANG TRANSPORTING SRNO.
ENDLOOP.
LOOP AT GT_LANG INTO WA_GT_LANG.
CONCATENATE 'MATEDESC-' WA_GT_LANG-LAISO INTO V_FIELDNAME.
CLEAR WA_IT_FLDCAT.
WA_IT_FLDCAT-FIELDNAME = V_FIELDNAME.
WA_IT_FLDCAT-SELTEXT = V_FIELDNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-INTLEN = 40.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
APPEND WA_IT_FLDCAT TO IT_FLDCAT .
CLEAR WA_GT_LANG.
ENDLOOP.
LOOP AT GT_LANG INTO WA_GT_LANG.
CONCATENATE 'BASDAT-' WA_GT_LANG-LAISO INTO V_FIELDNAME.
CLEAR WA_IT_FLDCAT.
WA_IT_FLDCAT-FIELDNAME = V_FIELDNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-INTLEN = 255.
WA_IT_FLDCAT-SELTEXT = V_FIELDNAME.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
APPEND WA_IT_FLDCAT TO IT_FLDCAT .
CLEAR WA_GT_LANG.
ENDLOOP.
V_FIELDNAME = 'MATNR'.
CLEAR WA_IT_FLDCAT.
WA_IT_FLDCAT-FIELDNAME = V_FIELDNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'Matnr'.
WA_IT_FLDCAT-INTLEN = 18.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO IT_FLDCAT INDEX 1.
V_FIELDNAME = 'BEGRU'.
CLEAR WA_IT_FLDCAT.
WA_IT_FLDCAT-FIELDNAME = V_FIELDNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'BEGRU'.
WA_IT_FLDCAT-INTLEN = 4.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO IT_FLDCAT INDEX 2.
ENDFORM. " get_lang
*& Form dynamic_tables
* text
* --> p1 text
* <-- p2 text
FORM DYNAMIC_TABLES.
ASSIGN LT_DATA TO <FS_DATA>.
* Creating the Dynamic Internal Table
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = IT_FLDCAT " Fieldcatalogue
IMPORTING
EP_TABLE = <FS_DATA> " Dynamic Internal Table
EXCEPTIONS
GENERATE_SUBPOOL_DIR_FULL = 1
OTHERS = 2.
* Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA>->* TO <FS_1>.
* Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_1> TO <FS_2>.
* Creating a Workarea
CREATE DATA LWA_LINE LIKE LINE OF <FS_2> .
* Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE->* TO <LWA_LINE_WA>.
ENDFORM. " dynamic_tables
*& Form populate_final_table
* text
* --> p1 text
* <-- p2 text
FORM POPULATE_FINAL_TABLE.
LOOP AT GT_TEXT_OUTPUT_LINE INTO GV_TEXT_OUTPUT_LINE.
READ TABLE GT_LANG INTO WA_GT_LANG
WITH KEY SPRAS = GV_TEXT_OUTPUT_LINE-SPRAS.
IF SY-SUBRC EQ GC-FOUND.
GV_TEXT_OUTPUT_LINE-SRNO = WA_GT_LANG-SRNO.
ENDIF.
MODIFY GT_TEXT_OUTPUT_LINE FROM GV_TEXT_OUTPUT_LINE.
ENDLOOP.
ENDFORM. " populate_final_table
*& Form populate_dynamic_table
* text
* --> p1 text
* <-- p2 text
FORM POPULATE_DYNAMIC_TABLE.
DATA: INDX TYPE SY-TABIX.
LOOP AT GT_TEXT_OUTPUT_LINE INTO GV_TEXT_OUTPUT_LINE.
AT NEW MATNR.
INDX = SY-TABIX.
ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = GV_TEXT_OUTPUT_LINE-MATNR.
ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = GV_TEXT_OUTPUT_LINE-BEGRU.
ENDAT.
LOOP AT GT_LANG INTO WA_GT_LANG.
IF GV_TEXT_OUTPUT_LINE-SRNO = WA_GT_LANG-SRNO.
V_VAR = GV_TEXT_OUTPUT_LINE-SRNO + 2.
ASSIGN COMPONENT V_VAR OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = GV_TEXT_OUTPUT_LINE-MAKTX.
V_VAR = GV_TEXT_OUTPUT_LINE-SRNO + V_LINES + 2.
ASSIGN COMPONENT V_VAR OF STRUCTURE <LWA_LINE_WA> TO <F>.
<F> = GV_TEXT_OUTPUT_LINE-LTXT40.
ENDIF.
ENDLOOP.
AT END OF MATNR.
APPEND <LWA_LINE_WA> TO <FS_2>.
CLEAR <LWA_LINE_WA>.
ENDAT.
ENDLOOP.
ENDFORM. " populate_dynamic_table
*& Form LAYOUT
* text
* --> p1 text
* <-- p2 text
FORM LAYOUT.
CLEAR L_LT.
L_LT-ZEBRA = GC-YES.
L_LT-COLWIDTH_OPTIMIZE = 'X'.
L_LT-WINDOW_TITLEBAR = GC-TXT.
ENDFORM. " LAYOUT
*& Form populate_download_table
* text
* --> p1 text
* <-- p2 text
FORM POPULATE_DOWNLOAD_TABLE.
ASSIGN LT_DATA1 TO <FS_DATA1>.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = IT_FLDCAT " Fieldcatalogue
IMPORTING
EP_TABLE = <FS_DATA1> " Dynamic Internal table
EXCEPTIONS
GENERATE_SUBPOOL_DIR_FULL = 1
OTHERS = 2.
* Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA1>->* TO <FS_11>.
* Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_11> TO <FS_22>.
* Creating a Workarea
CREATE DATA LWA_LINE1 LIKE LINE OF <FS_22> .
* Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE1->* TO <LWA_LINE_WA1>.
DATA: STRN1 TYPE STRING,
STRN2 TYPE STRING,
INDX TYPE SY-TABIX.
ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = GC-MAT.
ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = GC-AUT.
LOOP AT GT_LANG INTO WA_GT_LANG.
V_VAR1 = WA_GT_LANG-SRNO + 2.
CONCATENATE 'MATERIALDESCRIPTION-' WA_GT_LANG-LAISO INTO STRN1.
ASSIGN COMPONENT V_VAR1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = STRN1.
V_VAR1 = WA_GT_LANG-SRNO + V_LINES + 2.
CONCATENATE 'BASICDATA-' WA_GT_LANG-LAISO INTO STRN2.
ASSIGN COMPONENT V_VAR1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = STRN2.
ENDLOOP.
APPEND <LWA_LINE_WA1> TO <FS_22>.
CLEAR <LWA_LINE_WA1>.
APPEND <LWA_LINE_WA1> TO <FS_22>.
V_VAR1 = 0.
LOOP AT GT_TEXT_OUTPUT_LINE INTO GV_TEXT_OUTPUT_LINE.
AT NEW MATNR.
INDX = SY-TABIX.
ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = GV_TEXT_OUTPUT_LINE-MATNR.
ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = GV_TEXT_OUTPUT_LINE-BEGRU.
ENDAT.
LOOP AT GT_LANG INTO WA_GT_LANG.
IF GV_TEXT_OUTPUT_LINE-SRNO EQ WA_GT_LANG-SRNO.
V_VAR1 = GV_TEXT_OUTPUT_LINE-SRNO + 2.
ASSIGN COMPONENT V_VAR1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
<FA> = GV_TEXT_OUTPUT_LINE-MAKTX.
V_VAR1 = GV_TEXT_OUTPUT_LINE-SRNO + V_LINES + 2.
ASSIGN COMPONENT V_VAR1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
* STR = GV_TEXT_OUTPUT_LINE-LTXT40.
* SEARCH STR FOR ';'.
* DO.
* IF SY-SUBRC = 0.
* SPLIT STR AT ';' INTO STR1 STR.
* <FA> = STR1.
* APPEND <LWA_LINE_WA1> TO <FS_22>.
* SEARCH STR FOR ';'.
* CLEAR <LWA_LINE_WA1>.
* ELSE.
* EXIT.
* ENDIF.
* ENDDO.
* <FA> = STR.
* APPEND <LWA_LINE_WA1> TO <FS_22>.
<FA> = GV_TEXT_OUTPUT_LINE-LTXT40.
ENDIF.
ENDLOOP.
AT END OF MATNR.
APPEND <LWA_LINE_WA1> TO <FS_22>.
CLEAR <LWA_LINE_WA1>.
ENDAT.
ENDLOOP.
ENDFORM. " populate_download_table
thanks
Nitya -
Accessing Dynamic Internal table fields
Hello All,
I have one internal table ep_tabx having 138 columns whose data is getting displayed
by using function module reuse_alv_grid_display.
Now my query is, i have created one custom button on the appl toolbar to download ep_tabx data.
IF the user changes the the layout of the output at runtime and then presses that custom button
then i have created one dynamic internal table using call method cl_alv_table_create=>create_dynamic_table suppose <dyn_table> whose struc will be that of
dynamic fieldcatalog returned by using FM REUSE_ALV_GRID_LAYOUT_INFO_GET.
And then I have put a loop on the int table ep_tabx and move corresponding to the int table
<dyn_table>. But when i download the <dyn_table> data through GUI_DOWNLOAD the
date fields data is not getting downloaded correctly. I have 4 date fields in my ep_tabx.
In the alv grid output the date is getting displayed like 08/30/2004(ie mon/date/yr) but in download
file it comes like 20040830(ie yr/mon/date and that too without /).How to access the dynamic
internal tables fields separately so asto convert them in the pgm before the download.
Kindly Help.
Thanks in advance.
MansiHi,
Search in SDN you would get loads of info on accessing dynamic itab's .
in order to convert your date format use WRITE stmt to convert the value in your itab before passing it to download FM.
Regards,
Raghavendra
Maybe you are looking for
-
HT201359 How can i change My iTunes account from Italy to France
I want to change My iTunes account from Italy to' france
-
Dynamic sorting in Cross Tab Report
I have 2 cross tabs in a report with element linking that filters data in 2nd report when I click on values in the first. I'd like a way to be able to sort the results in the 2nd cross tab in ascending or descending order dynamically. Please see imag
-
Can't open raw files in Adobe Bridge CS4
First of all, I use a macbook pro that runs on Leopard. My camera is 5d Mark ii. I have photoshop elements 8 for mac, but I love to use Adobe Bridge CS4 for basic editing. Here is my problem, it won't let me open raw mode to edit. I have tried th
-
How to delete a row from AbstractTableModel
my table is using an object to populate the data. static Object[][] data = new Object[LineCount()][5]; So when I delete a row, I should delete from the model or the object? Rgds
-
Blob setBytes and setBinaryStream Clarification Needed
I'm writing a JDBC driver for SQL Server and working on the Blob implementation details. One thing that is not clear in the JDBC spec to me at least is the behavior of the call to setBytes and to setBinaryStream on a Blob. Say for a simple example I