Passing the values in Recipe  PLM WEBUI

Created a new tab for Recipe via customization in PLM Web UI. But I am not able to  create new fields in the screen and pass the values.
Please let me know the configuration steps and how to pass the values to PLM Web UI

Hi Shailesh
You will have to create 'New Selection' in either Row/Columns (wherever you wish to display the Key Figures) or you could also create a 'Restricted Key figure'.
In  the First Selection / RKF.. select the ey Figure for  'No of Employee' and then select the Characteristic for the From/To Period (0I_FPER).
In the second Selection / RKF..select the Key Figure for the Amount and then select the Char for the From/To Period (0I_FPER).
If there is any other characteristic which is used for identifying the Employees that have resigned, (say for Eg. Employee Status could be 0 for resigned employee, a hypothetical case), select the char. for Employee status with the value '0' and include it in both the selections / RKFs and you will get the desired results.
Pl remember, if you select a period variable with a range (i.e. from and to values within the same variable)  , then you will get only one column for 'Amount' and the value in this column will be for value for the period.
If you want Amount for From and To values to appear in two different columns , the do not select variable with a 'range'. Instead select two variables with single value , one each from From and To.  (However, I am not sure if you requirement wants From and To in two different columns, although, you are saying so !!!). If you select two variable (say for eg. ZPERIOD1 and ZPERIOD2 then in your selections you will not use 0I_FPER instead the new variables).
Hope you find the answer useful.
Regards
Umesh

Similar Messages

  • I am trying to pass the value of a field from the seeded page /oracle/apps/

    I am trying to pass the value of a field from the seeded page /oracle/apps/asn/opportunity/webui/OpptyDetPG. The value I want is in the VO oracle.apps.asn.opportunity.server.OpportunityDetailsVO and the field PartyName.
    I have created a button on the page whose destination URL is
    OA.jsp?OAFunc=XX_CS_SR_QUERY&CustName={#PartyName}
    It opens the correct page, but in the URL it shows this
    http://aa.com:8005/OA_HTML/OA.jsp?OAFunc=XX_CS_SR_QUERY&CustName=&_ti=1897289736&oapc=177&oas=x5E2TIfP1Y0FykBt1ek4ug..
    You can see that &CustName is not getting the proper value. Do I need to do something different?

    You cannot call the form with OA.jsp . This is applicable only for OAF based pages registered as a function.
    For calling a Form, use the below example:
    You have to change the application responsibility key and form function name .
    "form:PN:PN:STANDARD:XXPNTLEASE:QUERY_LEASE_ID={@QueryLeaseNumber}"
    Regards,
    Sudhakar Mani
    http://www.oraclearea51.com

  • Job scheduling(passing the values to the child program)

    when i'm trying to schedule a background job(using job_open job_submit and job_close) i'm passing the values of the selection screen(parent program) to my child program using set parameter id. And trying to get the values using get parameter id in the cild program.
    But the values of the parent program are not being passed to the child program what may be the cause for it?

    rathan,
    Why con't you use
    SUBMIT... [VIA SELECTION-SCREEN]
    [USING SELECTION-SET <var>]
    [WITH <sel> <criterion>]
    [WITH FREE SELECTIONS <freesel>]
    [WITH SELECTION-TABLE <rspar>].
    When you start an executable program, the standard selection screen normally appears, containing the selection criteria and parameters of both the logical database connected to the program and of the program itself (see Direct Execution - Reports). When you start an executable program using SUBMIT, there are various additions that you can use to fill the input fields on the selection screen:
    SUBMIT... [VIA SELECTION-SCREEN]
    [USING SELECTION-SET <var>]
    [WITH <sel> <criterion>]
    [WITH FREE SELECTIONS <freesel>]
    [WITH SELECTION-TABLE <rspar>].
    These options have the following effects:
    VIA SELECTION-SCREEN
    The selection screen of the called executable program (report) appears. If you transfer values to the program using one or more of the other options, the corresponding input fields in the selections screen are filled. The user can change these values. By default, the system does not display a selection screen after SUBMIT.
    USING SELECTION-SET <var>
    This option tells the system to start the called program with the variant <var>.
    WITH <sel> <criterion>
    Use this option to fill individual elements <sel> of the selection screen (selection tables and parameters). Use one of the elements <criterion>:
    <op> <f> [SIGN <s>], for single value selection
    If <sel> is a selection criterion, use <op> to fill the OPTION field, <f> to fill the LOW field, and <s> to fill the SIGN field of the selection table <sel> in the called program.
    If <sel> is a parameter, you can use any operator for <op>. The parameter <sel> is always filled with <f>.
    [NOT] BETWEEN <f1> AND <f2> [SIGN <s>], for interval selection
    <f1> is transferred into the LOW field, <f2> into the HIGH field, and <s> into the SIGN field of the selection table <sel> in the called program. If you omit the NOT option, the system places the value BT into the OPTION field; if you use NOT, the system fills OPTION with NB.
    IN <seltab>, transferring a selection table
    This addition fills the selection table <sel> in the called program with the values of the table <seltab> in the calling program. Table <seltab> must have the structure of a selection table. Use the RANGES statement to create selection tables.
    WITH FREE SELECTION <freesel>, user dialog for dynamic selections
    To use this option, the called program must be connected to a logical database that supports dynamic selections. In the calling program, use the function modules FREE_SELECTIONS_INIT and FREE_SELECTIONS_DIALOG. They allow the user to enter dynamic selections on a selection screen. One export parameter of these function modules has structure RSDS_TEXPR from the RSDS type group. Transfer the values of this export parameter by means of the internal table <freesel> of the same structure to the called report.
    WITH SELECTION-TABLE <rspar>, dynamic transfer of values
    You need an internal table <rspar> with the Dictionary structure RSPARAMS. The table then consists of the following six fields:
    SELNAME (type C, length 8) for the name of the selection criterion or parameter
    KIND (type C, length 1) for the selection type (S for selection criterion, P for parameter)
    SIGN, OPTION, LOW, HIGH as in a normal selection table, except that LOW and HIGH both have type C and length 45.
    This table can be filled dynamically in the calling program with all of the required values for the selection screen of the called program. If the name of a selection criterion appears more than once, the system creates a multiple-line selection table for that criterion in the called program. If the name of a parameter appears more than once, the system uses the last value. Note that LOW and HIGH have type C, so that the system executes type conversions to the criteria of the called program. This is important for date fields, for example. Before your program is used in a live context, you should check it using the VIA SELECTION-SCREEN addition.
    Except for WITH SELECTION-TABLE, you can use any of the above options several times and in any combination within a SUBMIT statement. In particular, you can use the WITH <sel> option several times for one single criterion <sel>. In the called program, the system appends the corresponding lines to the selection tables used. For parameters, it uses the last value specified. The only combination possible for the WITH SELECTION-TABLE option is USING SELECTION-SET.
    If the input fields on the selection screen are linked to SPA/GPA parameters, you can also use this technique to pass values to the selection screen (see Passing Data Between Programs).
    The following executable program (report) creates a selection screen containing the parameter PARAMET and the selection criterion SELECTO:
    REPORT  demo_program_submit_rep1.
    DATA number TYPE i.
    PARAMETERS      paramet(14) TYPE c.
    SELECT-OPTIONS  selecto FOR number.
    The program DEMO_PROGRAM_SUBMIT_REP1 is called by the following program using various parameters:
    REPORT demo_program_submit_sel_screen NO STANDARD PAGE HEADING.
    DATA: int TYPE i,
          rspar TYPE TABLE OF rsparams,
          wa_rspar LIKE LINE OF rspar.
    RANGES seltab FOR int.
    WRITE: 'Select a Selection!',
    SKIP.
    FORMAT HOTSPOT COLOR 5 INVERSE ON.
    WRITE: 'Selection 1',
         / 'Selection 2'.
    AT LINE-SELECTION.
      CASE sy-lilli.
        WHEN 4.
          seltab-sign = 'I'. seltab-option = 'BT'.
          seltab-low  = 1.   seltab-high   = 5.
          APPEND seltab.
          SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
                          WITH paramet eq 'Selection 1'
                          WITH selecto IN seltab
                          WITH selecto ne 3
                          AND RETURN.
        WHEN 5.
          wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
          wa_rspar-sign = 'E'. wa_rspar-option = 'BT'.
          wa_rspar-low  = 14.  wa_rspar-high = 17.
          APPEND wa_rspar TO rspar.
          wa_rspar-selname = 'PARAMET'. wa_rspar-kind = 'P'.
          wa_rspar-low  = 'Selection 2'.
          APPEND wa_rspar TO rspar.
          wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
          wa_rspar-sign = 'I'. wa_rspar-option = 'GT'.
          wa_rspar-low  = 10.
          APPEND wa_rspar TO rspar.
          SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
                          WITH SELECTION-TABLE rspar
                          AND RETURN.
      ENDCASE.
    Pls. reward if useful...

  • Help Creating A Link In An IR Report Passing The Value From A Different Col

    Version 4.0.2.00.07
    Hello,
    I have an Interactive Report with a column that I need to create a link on but I need to pass the value of another column.
    This report shows the Features of a particular Release. There is a select list for the Release that is selected and executes the report.
    There is a column that indicates whether the Feature has a Commitment attached to it. If there is have that a link to another report that shows all the Commitments for that Feature by passing the FEATURE_ID which is also a column on the Feature report.
    Query:
    SELECT
          ,CASE WHEN ft.feature_id IN (SELECT cc.feature_id
                                       FROM customer_commitments cc
                                       WHERE ft.feature_id = cc.feature_id
                                      ) THEN 'Yes' ELSE 'No'
           END "Commitment Exists"
              ,ft.feature_id
    FROM ....If "Commitment Exists" has a 'Yes', the 'Yes' is a link that will pass the FEATURE_ID to another report that will show the Commitments for that Feature. If the "Commitment Exists" has a 'No' then no link.
    I was also wondering if the Commitment report could open in a seperate window and make it modal?
    I hope this is clear and someone could help me.
    Please let me know if it's not clear or more information is needed.
    Thanks,
    Joe

    To accomplish this I would build the link as part of the value. So if Yes the Yes itself would be a link, if No is simply text as today.
    It would look something like this:
    SELECT
          ,CASE WHEN ft.feature_id IN (SELECT cc.feature_id
                                       FROM customer_commitments cc
                                       WHERE ft.feature_id = cc.feature_id
           THEN
            '<a href="f?p=&APP_ID.:NEW_PAGE:&SESSION.::::Pn_FEATURE_ID:' || ft.feature_id || '">Yes</a>'
           ELSE
            'No'
           END "Commitment Exists"
              ,ft.feature_id
    FROM ....One problem with this approach is when you export the report (as a CSV for example). There are a few ways to handle this, one is to simply duplicate the column with clear text yes and no and set this column to be included on export and only visible on export. The other column, with the link, set it to no export.
    The other option is to add another condition on the REQUEST value.
    SELECT
          ,CASE WHEN ft.feature_id IN (SELECT cc.feature_id
                                       FROM customer_commitments cc
                                       WHERE ft.feature_id = cc.feature_id
           THEN
                  decode(:REQUEST, 'CSV', 'Yes'
                , '<a href="f?p=&APP_ID.:NEW_PAGE:&SESSION.::::Pn_FEATURE_ID:' || ft.feature_id || '">Yes</a>'
           ELSE
            'No'
           END "Commitment Exists"
              ,ft.feature_id
    FROM ....It seems that the link itself is getting replaced with a #. The link would look something like this:
    'f?p=&APP_ID.:NEW_PAGE:&SESSION.::::Pn_FEATURE_ID:' || ft.feature_id
    Hope this helps.
    Oh and of course, in order for the link to display you need to change the Display Type to "Standard Report Column" otherwise the HTML will be escaped.
    Thanks
    -Jorge

  • How to pass the values to stored proc using presentation variable in OBIEE

    Need your help regarding in resolving an issue in OBIEE 10.1.3.4.1
    There are 6 reports say ‘A’,’B’,’C’,’D’,’E’,’F’ in the same subject area.
    The reports are being configured with prompts using either the repository/presentation variables.
    One of the reports say ‘A’ has been configured to pass the values using presentation variables from the prompt in Advanced Tab of the report request to the stored procedure defined in the Execute Before Query section of the connection pool.
    After running another report ‘B’ in the same subject area, upon visiting the report ‘A’ view display error is being seen ( Please have a look below screen shot for your reference) .
    Speculate the issue is around presentation variables of report ‘A’ getting initialized even before running the report.
    Appreciate your earliest advise as this is a prod issue.

    Hi Prasad,
    I got your note, you should not use Session variable syntax to call presentation variable.
    you should use like @{AIC_PROJ_PLAT_SEQ_NO}
    One more thing: first test the variable AIC_PROJ_PLAT_SEQ_NO value then try to pass to SP.
    Hope this helps

  • Unable to pass the values to stored proc using presentation variable in OBI

    Hi All,
    Need your help regarding in resolving an issue in OBIEE 10.1.3.4.1
    There is an OBIEE requirement whereby two prompts need to be defined.
    1.     Textbox prompt
    2.     Drop-down prompt
    The dropdown values should be populated using textbox prompt. So, we have used presentation variable in textbox prompt and passing the same to select query of drop-down.
    Until this step, the report works just fine.
    Now, the value in both textbox and drop-down needs to be passed to stored proc.
    While trying to pass the values by using the presentation variable, the following error comes-up saying
    Session variable has no value definition.
    Note:Although the corresponding session variable has been set to default value,still the error appears.
    Please advise.
    Regards,
    Prasad

    "Session variable has no value definition" I'm assuming typo error and it should be presentation variable.
    Set default value for presentation variable that may work

  • Passing the values between two pages

    hi all,
    I am trying to pass the value from one page to another page. by referring the Link
    http://www.youtube.com/watch?v=4eyzBiIf5MM&feature=related
    I have created the code based on the demo. it is deployed without any issues. but when i press the hyperlink from the first page it is not moving to the second page.
    Regards
    C.Karukkuvel

    Hi john,
    My Requirement is to create a ADF page based on the Human Task with the Default payload. In that page when the user presses the empid link field, It will show all the information related to the employee id in a separate page.
    so ,
    1. i have created the View Object based on the Query with where clause
    2. Create a bind variable for the where clause
    3.Created s new page for displaying the employee details
    4.drag and drop the both the pages (employee details, default page created by human task) into the adfcconfig file.
    5.drag and drop the Execute with params into the adfcconfig file
    6.wire it from human task page --> execute with params--> Employee details page
    7.change the employee field in that human task page to a link field.
    8.drag and drop the set property listener to that employee field.
    Testing
    Enter the input values for the Web service, logging to the BPM worklist, double click that task .it is showing the details when I press the employee id it is not navigating to the employee details page.
    Thanks in advance
    C.Karukkuvel

  • Passing the values from one pgm to another pgm (Calling pgm has no sel scr)

    Hi gurus,
    In my requirement i need to pass the values from one program to another program.
    I am using SUBMIT statement . But , the program which i am calling has no selection screen.
    So how can i pass the values?
    Please help me ASAP.
    Regards,
    Bhanu.R

    Export your internal tables or work areas to a memory id in ur program before u use submit.
    Then in second pgm you have to import from memory id given above.
    example.
    EXPORT gs_header FROM gs_header to memory id 'HEADER'.
    EXPORT gt_item FROM gt_item to memory id 'ITEM'.
    SUBMIT YFIIN_DISHC_MAILREPORT EXPORTING LIST TO MEMORY AND RETURN.
    In your second pgm you can write
    import gs_header TO gs_header from MEMORY id 'HEADER'.
    import gt_item TO gt_item from MEMORY id 'ITEM'.

  • Passing the values from the graph when we use Navigate to the BI Content

    Hi,
    The following are the problems which we are facing when navigating to the other BI report.
    1)When using the “Navigate to BI content” action the values are not getting passed to the detail report from the graph. Is there any limitation or any alternative to make it work?
    When I click on the Bar graph I need to pass the corresponding period and the dimension (EX: Operating Unit – Vision Services R+D) to the detail report.
    2)I have tried using the “Navigate to Web page” action. I am able to pass the values but the page is getting opened in another window. I want that page to be opened in the same window so that my presentation variable values are not lost.
    3)When I click on the bar graph, I am able to pass the values period and operating unit. But my presentation variable values are lost. I want to retain them.
    Please help me out in achieving this scenario.
    Thanks,
    Chaithanya

    Hi,
    In the column properties give the navigation to other reports from the interaction tab and make a chart with the column and in the dashboard -->edit dashboard-->in the section where the report is placed--->give 'drill in place'.
    Regards
    MuRam
    NOTE: Please mention if this resolved your problem/still facing and close the thread.

  • Passing the values from subreport to master report in JasperReports

    Hi All,
    I want to pass the values from subreport to master report, but my subreport is without any query.
    Please help me in this regard. its urgent.
    Thanks & Regards
    Kris

    Hi,
    Below link may help you
    http://jasperreports.sourceforge.net/tips.tricks.html#returnvalues
    regards
    MJ

  • Passing the values to another page.

    Hi all,
    In the first column of the report is radio buttons
    After selecting the radio button of a row and pressing the button view, has to go the next page where i can view the full details of the row.
    How i should pass the values of the selected row in the view button.
    In other words
    How to refer the report items when pressing a button.
    For eg:
    If i say in URL Target like.....
    javascript:redirect('f?p=&APP_ID.:3:&SESSION.:DISPLAY:NO::P3_ACC_NO:' +#id#+)
    if i put #id# the value is not appearing..
    Could any one please guide me ?
    Thanks in advance
    bye
    Srikavi

    Hello,
    >> only if it is the primary key as you mentioned it is appearing.but, if i put an non-pk column it is not appearing.
    I’m not sure what you mean by that. The onclick event will always set your hidden item according the any database column. In my example it’s ‘empno’, but I don’t see any reason to use any other column in the row. Anyway, the reason to use PK as the passes parameter is that with the PK you can retrieve the entire record on your next page, and use any column you need from the record.
    If I misunderstood you’ please be more descriptive about the problem.
    Regards,
    Arie.

  • In BADi , How to pass the values between two Method

    Hi Experts,
    We have two methods in BADis. How to pass the value  between two Methods. Can you guys explain me out with one example...
    Thanks & Regards,
    Sivakumar S

    Hi Sivakumar!
    Create a function group.
    Define global data (there is a similiar menu point to jump to the top include).
    Create one or two function modules, with which you can read and write the global data.
    In your BADI methods you can access the global data with help of your function modules. It will stay in memory through the whole transaction.
    Regards,
    Christian

  • How can I pass the value to another frame?

    Hi all,
    The following is part of my coding of a frame. Once i click on the jButton2, the selected value will be stored into a variable named NAME and the value will be displayed by a label in same frame. At the same time, a new frame named TESTING3 will be set to visible.
    private void jButton2ActionPerformed(java.awt.event.ActionEvent evt)
    // TODO add your handling code here:
        String name = (String)jList1.getSelectedValue();
        jLabel1.setText(name);       //display the value in a label in same frame
        new testing3().setVisible(true);     //a new frame set to visible
    }      Question: How can I pass the value to TESTING3 frame and display it on that frame?
    Thanks,
    ning.

    just make an archive that save that variable and them get them from de clase were you save it
    public class sav {
    String n;
    public sav {
    n="";
    public void addn(String x){
    n=x;
    public String shown(){
    return n;
    and them save it from the frame
    sav sun = new sav();
    sav.addn(f);
    them call it from the other frame
    sav sin = new sav();
    String s = sin.shown();
    label.setText(s);
    and i think thats you want to do if its not please explain me better
    bye

  • How can i pass the value one from to another form?

    hi all
    how can i pass the value one from to another form  with out use it when ever i want to needed this value that ican useit?
    like i have two fields U_test1 and U_test2  table name @AUSR
    that i have  four form  A! , A2,A3,A4    please tell me in details....?

    Hi,
    U can assign the values to some variables and access then in ur required forms.
    Vasu Natari.

  • How to pass the values from the Wb Dynpro Application to the SAP Backend ?

    Hi All,
    Good morning..,
    I have scenario like:
    I want to pass the values from the web dynpro appication to the SAP Back end R/3 Table. IN backend the RFC is writtn to accept the structure input from the Webdynpro.
    Upto know I imported the corresponding RFC and maaped to the View.
    How to proceed with the coding to save the data...
    PLease suggest...
    Regards and Thanks in Advance,
    CSP

    Hi  Pradeep
    Steps:
    1. First create an instance for bapi and bind the instance to the bapi node.
      Z<bapi name> zb=new Z<bapi name>();
      wdContext.nodeZ<bapi name>. bind(zb);
    2. Then if u have the import parameter u have to set them by using
        The instance of the above bapi.
        Zb.set<import parameters>;
    3. If the bapi has a table parameters then the structure for the table parameters will also be imported
       In the model class.
    4. Set the table parameters by creating the instance for that structure and using this instance set it.
       Z<Struct>itm tab=new Z<Struct>();
       Tab.set<table parameters>
    5. Then add the structure instance to the bapi instance.
        Zb.add(Tab);
    6. Then Execute the bapi after setting the import parameters.
    7.  If there is any export parameters, then get the values after execution.
    Look at this thread for codes
    Re: RFC call on click of button
    Regards,
    Arun

Maybe you are looking for