Passing validation(ob28) for particular company code at the time of posting

Hi Gurus,
My business requirement is creation of new company code for recalculation of accrual amount. where in these recalculated amount will be posted to new company code, however we had defined some validation (ob28) for document posting. so my query related to is it possible to pass all the validations for this new company code at the time of posting?
your response will be highly appreciated
Thanks & Regards,
Jamuna

Hi,
My requirement is to create new company code, and whenever the document will be posted during the posting whatever validations has been defined with respective to document posting should be restrict for new company code.
so wheneever business will try to post the document for new company code all the existing validations will be by pass for document posting.
Thanks,
Jamuna

Similar Messages

Asset Claas Activate For particular Company code in Company

Hi,
Asset class is defined at client and how can we activate asset class for particular company code in group company how can assign the asset class for particularly one company code in group company
Regards,
Harish

Asset class depends on chart of depreciation , so if you have created an asset class on lets say US chart of Depreciation, it will be available to all the companies that have US Chart of Depreciation assigned to them .
Thanks

How to block postings for particular company code ?

Hello All,
I have a scenario like FI document shouldn't generate automatically when I invoice with reference to order/delivery document.
Just I want only Invoice number but not FI document (It should park instead of creating automatically) for particular company code among all and later I will create manual FI document with reference to that Invoice.
Existing solutions:
1.Can control in document functionality but I am using single document for all company codes
2.Can control using FD02 transaction but I have many customers
Please suggest any new solution other than above.
Regards,
Gangadhar

Hi,
Please check the below thread:-
Re: VF01: Prevent document posting in FI via user exit
It should be useful in your situation.
Regards,
Gaurav

PO/ Invoice created for supplier does not exist for particular company code

Hi Gurus,
We have a case where PO created w.r.t supplier X does not exist for any company code A. Also Invoice is generated.
As per my analysis:
1. Purchasing organization is assigned to the particular plant and Plant does assigned to company code. This purchasing organization does not assigned to any company code and kind of centrally allowed to any company code based on above link.
2. Supplier X does exist for the purchasing organization. And in Partner function-For PI (Invoice presented) partner function, it is defined for another supplier Y. This Y supplier does exist for company code A and might be the reason, it is allowing creating PO and Invoice.
Please correct me, if I am wrong or If there will be any other reason for the same. Just for your information, there is no Info record exist for this PO as it is created for service without any material number.
Thanks for your response.
Best regards,
Karun Kumar

You can create vendor only with reference to purchase organization and withoout company code.
for this vendor, you can create PO and MIGO and system will allow but when you try to post the invoice system will prompt you to enter different invoice party. if you dont enter different invoice party, system will throw an error message "vendor is not defined in XXXX.
So in your case, your analysis is correct.

Blocking of J1IEX Transaction for particular company code

Hi,
I have two requirment,
1 : For our one company code C011 , J1IEX transaction should not allow , we have one user and that user is working on different conpany code but for particular to this company code C011, how to block the J1IEX transaction user should not take the cenvat
2: For the same company code J1IEX transaction is allowed only of in Purchase order material code is XYZ , otherwise for other materials materials should not come i n J1IEX to get the cenvat benifit.
regards,
zafar

Hi Zafar.
I belive this would be an authorization issue in this case (guys on the forum pls correct me if I'm wrong).
Maybe you should put a request for the Basis/Security management team who supports your company, informing what C.Code restrictions to add in this transaction, and for what users, so that they would find out what authorization objects to restrict.
Regards,
Rodrigo.

Calculate the database size for a particular company code in SAP

Hi Experts,
We have 30 company codes in our FI production system. So to plan another new company code to be deployed into the system, we need to know exact data capacity (database) of the previous company code that we already deployed. Kindly let me know whether it possible to calculate the database size occupied for a particular company code in a SAP system.

>
Kalyan Kumar Bandlamudi wrote:
> Hi Experts,
>
> We have 30 company codes in our FI production system. So to plan another new company code to be deployed into the system, we need to know exact data capacity (database) of the previous company code that we already deployed. Kindly let me know whether it possible to calculate the database size occupied for a particular company code in a SAP system.
Its not possible to calculate data size based on company code.
By creating company code It will not occupy much space. Depends on your posting documents for particular company codes.
Thanks
Siva

Calculate database size for a particular company code

Hi Experts,
We have 30 company codes in our FI production system. So to plan another new company code to be deployed into the system, we need to know exact capacity (database) of the previous company code that we already deployed. Kindly let me know whether it possible to calculate the database size for a particular company code in a ERP system.

>
Kalyan Kumar Bandlamudi wrote:
> Hi Experts,
>
> We have 30 company codes in our FI production system. So to plan another new company code to be deployed into the system, we need to know exact data capacity (database) of the previous company code that we already deployed. Kindly let me know whether it possible to calculate the database size occupied for a particular company code in a SAP system.
Its not possible to calculate data size based on company code.
By creating company code It will not occupy much space. Depends on your posting documents for particular company codes.
Thanks
Siva

One vendor for two company codes

Hi Frds,
I have two company codes and i create a vendor which is applicable to both the company code.Is it required for me to create separate Payable reconciliation GL account for each company codes or creation of one common recco account is enuf.
Please elaborate on this as am new to this..
Thanks,
Rashmi Ravi

Dear all,
SAP allows You to create a customer / vendor master data that contains information that is valid for all the Company code --> into General data.
Then there is a part, Company Code data, where You can define specific details for each Company Code.
The transaction is the same FD01 or FK01.
I hope this helps You.
Mauri

Different chart of A/c for different company codes

Hello ,
As per my Knowledge we can have Multiple Chart of account for multiple company . We have 5 company codes ,
2 Company codes are Germany
1 Company code in India
1 Company code in US
1 Company code in Brazil.
1) shall i maintain only one chart of account for all the company codes, if i done like this what will be the advantage and disadvantage?
2) If Suppose shall i use Different Chart of account specific to Country?
3) If suppose i used for two country one chart of a/c and for another two country another chart of a/c.....(total two)
which is the best solution? if you have any different idea let me know.
Thanks
sapman man

Hi,
Control area is having the authorization to allow the chart of account for a particular company code.
The company codes are belonging to a particualr Controlling area, definitly they (Company code)are using the same chart of A/C is used by CA.
defenitly CA (controlling area) has only one chart of A/C. So if you need to maintain the company codes are belonging to different chart of A/Cs, you have to assign them different CAs which have their own chart of A/Cs.
This is my understanding...
regards,
Sathes

Exchange Rate Type default different from M for a company code

Dear SAP guru,
Would you shed some light on this?
How would we be able to default/assign a different exchange rate type from M at a company code level?
I have a company code - finance company - that every foreign currenty transaction needs to be translated using different exchange rate type (i.e. daily hedge rate) than other operating companies.
The OB22 screen makes it appear as M rate is specificied as 1st currency in company code, but grayed out and not able to change.
Please help me with your expertise on this.
Kind regards
taro

Hi,
ExRateType is hardcoded in
Main Program     SAPL0F03
Source code of   L0F03I01
*------- Daten zur ersten Hauswährung -
rfcu4-curtp = '10'.
rfcu4-bwer1 = '0'.                                        "AT 23039
rfcu4-kurst = 'M'.               <<<<<
rfcu4-cursr = '1'.
rfcu4-curdt = '3'.
The reason why the assignment of exchange rate type M to the first company code currency is a historical reason. A lot of coding within the SAP system is directly developed under the prerequisite that the exchange rate type for the first company code currency is M.
As you described you want to setup several company codes in one client that all have the same first company code currency but should use different exchange rates. To solve that issue there are 2 ways available:
The first way is that you use the functionality to assign an exchange rate type to a document type. That would mean a lot of work because in that case you would have to define all document types seperatly for
every company code.
The second possible solution is that you use different names for the fist company code currency.
That means for example that you name the first company code currency in company code 0001 USD and in company code 0002 US1. So you can use different exchange rates for the same currency.because in that examle USD and US1 are only different names for the same currency. Using this approach you can have different exchange rates for different companies with the same company code currency by setting only different names even though the exchange rate type M is fix asigend to the first company code currency.
Best Regards,
Gladys xing

F.27 - combined statement for different company codes

Hi,
In F.27 transaction, for sending account statement to customer, for a customer with open items in different company codes, a different account statement is generated for each company code. The business wants one statement per customer, with open items from all company codes. We have been working on a investigating a solution, but making a Z-copy of the programs and modify looks too complicated. Is there a solution in FI configuration, which leads to generation of just one account statement per customer.
Help would be appreciated.
Thanks
PH

HI
Have you tested the statement by giving multiple company codes in F.27 in Company code selection? You have the option of selecting multiple company codes here, It should solve your problem.
Award points if usefull.
sarma

SEPA file – how to create one file for multiple company codes

Dear experts,
My company has multiple company codes and they process automatic payments (F110) for multiple company codes in the same run.
The company wants to generate one SEPA file for all company codes.
In OBPM1 for SEPA format in the section ``Payment medium output devided by level of detail`` I unchecked everything (attached).
OBPM4 for SEPA format is showing `` No separation of payment medium output``.
Unfortunately, when I run automatic payments (F110) for multiple codes, multiple files for each company code are created.
Can anyone let me know how it is possible to create one SEPA file that will contain payments for multiple company codes?
Thank you

Hi Zara,
Please check in transaction DMEE your format tree (eg. SEPA_CT), 'DMEE tree: properties' - tab 'Sort/key field'. Is the Sort/key field 'ZBUKR' defined there with Level 1?
Please follow the recommendation of note http://service.sap.com/sap/support/notes/1742584
Regards,
Emöke

Mass deletion of document number ranges intervals for several company codes

Dear experts,
We are running version ECC6 and are about to go-live a lot of company codes simultaneously. We would like to delete satndard number ranges intervals for these company codes.
Is there a way to delete the number ranges intervals (which have not been used) for several company codes at the same time ? I'm looking for a transaction or a program similar to OBH1 (used for the creation of number ranges ).
Thanks in advance for your help.
Best Regards,
Steven

Hi
I am also not aware of such T.code to delete number ranges for a company code.
Alternatively, you can go to FBN1 in change intervals mode.
From the Menu Select all and Press Shift + F2 (Delete interval).
Ofcourse, this have to be done individually for each co. code.
Regards

Single depreciation run for multiple company codes

Hi experts,
How can I carry out a depreciation run for multiple company codes in one transaction? I thought about creating a variant and running a batch job but you can only select the run for one company code at a time. Am I missing something here. Kindly provide explanation of how this can be done.
Thanks.
Ben

Use the program RAPOST2010. There is no transaction for this program, but you can create your own if necessary, for example ZAFAB.
Please not that there is a separate forum for asset accounting.

Filling of set up tables for several company codes

hi
i am filling a set up table for the application specific inventory control statistical data. But while setting up data filling selection parameters contains selection parameters for the single Company code.
But in my scenarios there are several company codes whose data resides in the R/3 and i need to bring data for all company codes in the set up table.
so now filling up the data in set up table, shall i have to fill up data for individual company code, OR i have to fill data for one company only and on delta load data pertainig to other company codes will be populated to the set up tables.
kindly give ur expert advice in this situation.

Hello,
i dont understand why should it be mandatory to fill the company code on r/3 side while initialisation!!
But even if it is mandatory, u have to do one by one init runs on R/3 side for all company codes that you need.
Check in rsa3 for records after the init runs.
If it was not mandatory, u could have run the setup(init) run on r/3 side for all company codes at a time by keeping the field blank!!
Also again in the BW side you can have company code for selection in the infopakage!! there u can also have it as a range rather than running for one at a time.
Hope it is helpful now..
regards,

Passing validation(ob28) for particular company code at the time of posting

Similar Messages

Maybe you are looking for