Passing value to a field of SAP Program which do not have "Parameter ID"

Dear Experts,
My requirement is that i need to pass a value from my dialog program to a field of SAP Program which do not have "Parameter ID" attached to it.
For example: If you run SAP Transaction CS14, it has two sections viz., Primary BOM and Secondary BOM. I need to copy and create own screen using Dialog program. The screen appears in custom screen would be similar to that of the SAP Transaction CS14. If you check the fields, all the fields have "Parameter ID" attached to it, except for the following fields which do not have Parameter IDs are "Alternative", "Valid From" and "Required Qty".
Hence how do i pass value to those fields? Kindly help me
To those fields where "Parameter IDs" are attached, i can use below two statements:
Set parameter id <par> field <field>.
call transaction 'CS14' and skip first screen.
Regards,
Ramesh Manoharan

Hi Harald Boeing,
Thanks you very much. My problem is solved.
Rewarded Points.
Regards,
Ramesh Manoharan

Similar Messages

Value of new field in SAP internal table does not appear in HTML

There is already an existing web application. (has both SAP and HTML programs)
I only need to add one field in the SAP internal table and display the value in HTML.
I activated and pushed the publish button in SAP.
Still, it is not read successfully in HTML and therefore not displayed in the GUI.
What step did I miss?

Hi,
To publish completely an internet service, try SIAC_PUBLISH_ALL_INTERNAL transaction.
Hope this helps,
Iván.

How to pass values in dynamic fields in LX03

HI ,
i want to pass values for dyanmic fields in lx03 program by calling this in my own program through call transction or submit report .

LX03 is the report program so you have to use Submit report.
See the simple example :
REPORT ZTEST_98 .
DATA: t_param LIKE rsparams OCCURS 10 WITH HEADER LINE.
parameters p_LGNUM like lagp-lgnum obligatory.
start-of-selection.
      t_param-selname = 'S1_LGNUM'.
      t_param-kind = 'P'.
      t_param-low = p_lgnum.
      APPEND t_param.
*-- Period
SUBMIT RLS10030 VIA SELECTION-SCREEN
                          WITH SELECTION-TABLE t_param
                          AND RETURN.
Just press F1 on submit and you get good documentation.
Thanks
Seshu

Pass value to a field dynamically..

Hi Experts,
Can any one solve this issue?.
I want to pass value to different fields dynamically..
Egu2026
I have work are having fields
lwa_table-var1,
lwa_table-var2,
lwa_table-var3,
lwa_table-var4,
u2026.. up to lwa_table-var100.
My logic is I have to pass l_tot value .. based on the last letter like below.
if l_tot value is 1 we have pass to lwa_table-var1
if l_tot value is 2 we have pass to lwa_table-var2
if l_tot value is 3 we have pass to lwa_table-var3
if l_tot value is 100 we have pass to lwa_table-var100.
<removed_by_moderator>
Thanks in advance.
Regards,
Kumar.
Edited by: Julius Bussche on Aug 12, 2009 8:41 AM

Hi Friend,
U can do Following.....
data: text(12) type c.
data : num type n.
data: int type i.
data: begin of wa_test,
      var1,
      var2,
      var3,
      var4,
      end of wa_test.
FIELD-SYMBOLS <fs_wa> TYPE ANY.
do 4 times.
int = int + 1.
num = int.
CONCATENATE 'wa_test-' 'var' num into text.
ASSIGN (text) to <fs_wa>.
<fs_wa> = num.
UNASSIGN <fs_wa>.
enddo.
write : wa_test-var1 , wa_test-var2 , wa_test-var3 ,wa_test-var4 .
ouput will be :     1 2 3 4.
Lets take Your Scenario----
>>>>>>>>>>>>>>>>>
Data: begin of lwa_table,
Var1,
Var2,
Var3,
u2026..
u2026u2026
Var100,
End of lwa_table.
Data: l_tot type i.
u2022     For example l_tot = 36.
u2022     Then u want to pass the same to lwa_table36.
For this do followingu2026..
Now Define-->>>
data: text(13) type c.
data : num type n.
FIELD-SYMBOLS <fs_wa> TYPE ANY.
*Now till now we done all the data definitions now u have to do following to pass it dynamically,
l_tot = 36.
Num = l_tot.
CONCATENATE lwa_table-' 'var' num into text.
ASSIGN (text) to <fs_wa>.
<fs_wa> = num.
UNASSIGN <fs_wa>.
Write : lwa_table-var36.
Output will be 36.
Hope this resolves ur issue,
Regards,
Akash Rana
Edited by: AKASH RANA on Aug 12, 2009 8:53 AM

How to find out in program which all classes have implemented an interface

Hello,
I have created an interface and few classes are implementing the interface.
I want to know in a program which all class have implemented the interface.
Is it possible to find it out and how?
Regards,
Bikash.

Hi Bikash,
Read the Database view VSEOIMPLEM with where condition REFCLSNAME = Interface Name and version = 1.
This would give you all the classes which have implemented the interface and are active...
If you want to look at the values that the field version can have then see Type Group SEOC ans search for version....
Hope this help...
Regards,
Sitakant

Trying to access row values in a table which does not have any rows yet

try{
                         MappedRecord importParams = recordFactory.createMappedRecord("CONTAINER_OF_IMPORT_PARAMS");
                         IFunction function1 = client.getFunctionsMetaData().getFunction(funModGetDet);
                         IStructureFactory strucFact = interaction.retrieveStructureFactory();
                         response.write("try2 :"+pnumber);
                        IRecord structure = (IRecord) strucFact.getStructure(function1.getParameter("PERNR_TAB").getStructure());
                         response.write("try111 :"+pnumber);
                         structure.setString("PERNR",pnumber);
I am getting the following error "Trying to access row values in a table which does not have any rows yet " where PERNR_TAB is a table containing field "PERNR".
Can anybody help me out?

Please re-post this question in the appropriate forum. It seems to have nothing to do with Web Dynpro.

Standard Manager executing other programs which are not INCLUDED .

hello guys,
We are having eBiz 11.5.9 environment and 9.2.0.6 Database on AIX 5.3 32-bit environment.
I am new to this client's environment and found that, there are 3 include specialization rules defined for Standard Manager which does not include "Active Responsibilities" program but still this Standard Manager is executing "Active Responsibilities" without any issues.
How is this possible ???
Ideally, Standard Manager should only run those 3 included programs ONLY and for rest of the programs which are not assigned to any of the concurrent manager , we should get "INACTIVE/No Manager" message.
My 2nd question is, when I am running this oracle seeded script $FND_TOP/sql/afrqscm.sql which shows the manager assigned to the perticular request id, it gives the below output,(Below is request id is for "Active Responsibilities")
===================================
SQL> @afrqscm.sql
Enter request ID : 22035368
Request 22035368 can be run by the following concurrent managers:
Running Manager
20 STANDARD
0 ALTS
Below are the active concurrent manager log filenames:
no rows selected
===================================
In our environment , ALTS is DISABLED manager without having any specialization rules attached to it and its basically a "Backup standard manager".
I am wondering, what setup is required to have backup concurrent manager like ALTS which will take care of requests in case standard manager goes down ?????
Ebiz architecture is one Admin/conc/db Tier (Aix 32 bit) and 5 Web nodes ( RHEL Linux 32 bit).
Thanks,
Prasad
Edited by: 881822 on Dec 7, 2011 3:00 AM

Hi Hussein,
Thnks for your reply,
My second doubt is resolved as even though there are no specialization rules assigned to ALTS manager , that means it is exactly the same as that of Standard Manager and will execute all the programs. Below is statement from your mentioned pdf ,
=========
Specialize your manager to run only certain kinds of requests. Without specialization rules, a manager accepts requests to start any concurrent program.
=========
Regarding your first question, Yes , we do bounce managers once in a month , below is the status of those two conc programs which are INCLUDED in Standard Manager.
SQL> select 'Concurrent program '||fcp.concurrent_program_name||' is ' ||decode(fcqc.include_flag,'I','included in ','E','excluded from ')||fcqv.user_concurrent_queue_name specialization_rule_details from fnd_concurrent_queues_vl fcqv,fnd_concurrent_queue_content fcqc,fnd_concurrent_programs fcp where fcqv.concurrent_queue_id=fcqc.concurrent_queue_id and fcqc.type_id=fcp.concurrent_program_id and fcp.concurrent_program_name='CPINR080C';
SPECIALIZATION_RULE_DETAILS
Concurrent program CPINR080C is included in Standard Manager
Concurrent program CPINR080C is excluded from TESTPlus General
SQL> select 'Concurrent program '||fcp.concurrent_program_name||' is ' ||decode(fcqc.include_flag,'I','included in ','E','excluded from ')||fcqv.user_concurrent_queue_name specialization_rule_details from fnd_concurrent_queues_vl fcqv,fnd_concurrent_queue_content fcqc,fnd_concurrent_programs fcp where fcqv.concurrent_queue_id=fcqc.concurrent_queue_id and fcqc.type_id=fcp.concurrent_program_id and fcp.concurrent_program_name='CPDOR270C';
SPECIALIZATION_RULE_DETAILS
Concurrent program CPDOR270C is excluded from TESTPlus General
Concurrent program CPDOR270C is included in Standard Manager
Thanks,
Prasad

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program?

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program? If not how do I clear off the old site so as to re publish with Iweb.

iWeb cannot import published files so you would need rebuild the site.
Yahoo hosting is notoriously poor and their tech support is awful. I would suggest you look for new hosting and start afresh. Some pointers for choosing hosting...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
If you do choose to go this route, transfer your domain name registration away from Yahoo to your new host.

I have Sony camera DSC-HX400V which does not have raw program. Pls explain what can I do with jpeg only

I have Sony camera DSC-HX400V which does not have raw program. Pls explain what can I do with lightroom 5 with jpeg only
Arieh Gertler
[email protected]

You can do just about anything with a JPEG image that you can with a raw image. The advantage of working with raw is that it is possible to work with more extremes in exposure. More highlights and shadows can be recovered in a raw image, but there is a lot that can be done with JPEG images as well. All of the library functions and keywording and all the other features of Lightroom can be used on JPEG images just as easily as they can be used on raw images.
Having said all that, you might be more comfortable using Photoshop Elements. Both programs have trial versions that you can use for 30 days to decide which one or whether both will work for you. It would probably be to your advantage to try them out and decide for yourself.

Passing values to hidden fields in screens

Hi ,
I have designed a screen which has i field which is output only, and two fields which are hidden.. the output only field gets populated when i select value from an alv tht pops up on the screen based on certain conditions.. the hidden fields should also be populated than.. but the hidden fields are not getting populated i think..
i have assigned a t-code to this screen,
and i need to call this transaction from another program passing values to all the fields.. i used parameter id for all teh fields, but values are not getting populated in the hidden and display fields. i gets in when i make it input enabled.. but i cannot let users enter values in 1 field, and i do not want users to see the other field.. What do i do???? please give your valuable suggestions. .a ny idea how to correct the issue?
Regards,
Suzie

Hi,
If you want one of the fields to be grey mode you can do that statically in the screen painter or dynamically in the progarm
in PBO
loop at screen
if screen-name = 'TO_BE_GREY_MODE'.
SCREEN-INPUT = 0
ENDIF
endloop
for hidden fields if the screen name and the variable name in the program are same the data transfer takes place but the users cannot see this.
Regards
Ramchander Rao.K

Multiple Value in additional fields using SAP Query

HI All,
I have a question related additional field in SAP Query. I tried to create report about PR and PO using SAP Query. Since one PR can be converted to multiple PO, I decided to create additional field
po_1
to display the value of PO that related to the PR. But I meet problem when I want to show several PO number in additional field
po_1
, I couldn't look the way to solve this problem. Can anybody help me? Just for info, I assign value to additional field
po_1
in record processing part.
Thanks....

HI,
IN SQ02, IF table is already in JOIN, just click on the PLUS sign to expand the strcture.
All the field showing Plus sign in the strcture are selected in your query and with MINUS sing are no selected.
So you have to just click on the MINUS sign for the field you want to use through table field.
Generate the query and execute thriugh SQ01.
If you want to add some other field which is not a part of JOIN,
then click on EXTRAS Button shown in the MENU option.
Click on Create button and system will ask abt the additional field.
Regds,
Anil

Mapping JDBC lookup: Passing values to multiple fields at target

Hi all
i my scenario i am using mapping JDBC lookup ,and it is working sucessfully.
but i need to select 4 fields from lookups select query and passing it to 3 different target field at target MT.
if i use Global container object methods,than only 1 field i can store inglobal container variable..
and return it 1 the target fields...
BUT how do i pass 4 fields ,result of the select query to 4 different fields at target MT..
query :"
Select BPNO,emp,BENR,bacepack from Ztable where BPNO='"+BPNO[0]+"'";
Regards
AjayP

Hi,
I have to fetch 3 values and populate it to the 3 fields in the target. The UDF am using is as attached. This UDF is for fetching one value. Kindly tell me about the changes I will have to make to fetch 3 values instead of 1 value.
String Query = " ";
Channel channel = null;
DataBaseAccessor accessor = null;
DataBaseResult resultSet = null;
// Query to retrieve the PROP value for the particular source value passed.
Query ="Select PROP from TANKS where ID='" + ID[0] + "' ";
try{
//Determine a channel, as created in the Configuration
channel = LookupService.getChannel("<Business Service>","<Communication Channel>");
//Get a system accessor for the channel. As the call is being made to an DB, an DatabaseAccessor is obtained.
accessor = LookupService.getDataBaseAccessor(channel);
//Execute Query and get the values in resultset
resultSet = accessor.execute(Query);
for(Iterator rows = resultSet.getRows();rows.hasNext();){
Map rowMap = (Map)rows.next();
result.addValue((String)rowMap.get("PROP"));
catch(Exception ex){
result.addValue(ex.getMessage());
finally{
try{
if (accessor!=null) accessor.close();
catch(Exception e){
result.addValue(e.getMessage());

Passing values to another field in APEX form

Hi,
How do I pass a value in 1 field to another field in APEX form ?
I have a hidden field and I need to populate this field by another field.
thanks

I found the solution to my problem.
[1] Create a "After Submit" under Computations.
[2] Select 'Item Value' under Type in Item Name
[3] Select "After Submit" under Computation Point
[3] Enterer Item Name, which value needs to be passed in 'Source'
thanks

Regarding how to pass values to the fields of a screen.

Hi all :
     there is a field called approver on screen. I'd like to pass value to it ,
     may I use the statement like      approver-text = 'xxx'. ?
     is this ok?
     Thanks for any of your reply.

Hi,
Parameters: p_name type char20 default 'XXX'.
you can give like this.
or
parameters: p_name type char20.
Initialization.
p_name = 'XXX'.
both these will work
regards
Sarves

Enter multiple values for a field in dialog programming

I need to enter multiple values for some of the fields in screen , which screen element do i use for this or is there any other way of doing it?

That would be a table control. In this you can enter multiple values for multiple fields.
http://help.sap.com/saphelp_nw04/helpdata/en/9f/dbac5e35c111d1829f0000e829fbfe/content.htm
Thanks,
SKJ

Passing value to a field of SAP Program which do not have "Parameter ID"

Similar Messages

Maybe you are looking for