Passing values by reference to a graph seems to be not working... help, I'm losing my mind! ;)

I'm bordering on psychosis now.
Grr..
I'm trying to pass an array to a waveform graph by reference. The array is an array of I16 data.
I have verified that the data in question is correct, and when viewed view probe (RIGHT before going into the property node, mind you) it is something like:
2048
2053
2066
However, when you look at the front panel it's totally different. Turning on Autoscale Y and looking at the data showed that instead it was displaying:
-1024 2048 0 0 (two other numbers) (two other numbers) 0 0 (etc.)
I imagine that it is some sort of typecasting problem, but I cannot figure it out.
I note that the word "value" on
the property node is Orange, indicating that it is writing a DBL. I had the Refnum Control include data type, but even so, it appears Orange.
The Waveform Graph itself was of type DBL. I never changed it, but in the main program, I did wire an I16 value to it, which SEEMED to change the Graph to type I16. Is there a more rigorous way of changing a Waveform Graph's data type. (This could be the problem)
I'll attach the front panel with the sub-vi in question. Please help or I may explode.
-Dobbs

Here are the files:
Attachments:
dwcs_advanced.vi ‏350 KB
dwcs_-_sw_graph_load_&_save.vi ‏62 KB
flattp10.wfm ‏16 KB

Similar Messages

  • How enter the values in to table when create entries option is not working

    hi everyone,
         can u please tell me How enter the values in to table when create entries option is not working.
    it's urgent.
    thanking u all

    Hi Shree,
    how many entries u want to insert ,,
    is it a ztable or custom table ..
    just tell me ur clear requirement ..
    clarify the same ..
    if no options avaliable then if its less entries or some value u can do it through debugging ..
    if its bulk entries then u can write a program ..
    just let me know ..
    regards,
    VIjay

  • When i type the wesite in the address bar and hit ENTER, it seems to be not working for me; anybody knows how to resolve this issue?

    When i type the wesite in the address bar and hit ENTER, it seems to be not working for me; anybody knows how to resolve this issue? i have to click on the green arrow button to continue.

    Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
    You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
    If not, see this: <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Help i have an old ipod touch today the wifi seems to be not working... I've been typing the correct password for my network but it doesnt work!

    Help i have an old ipod touch today the wifi seems to be not working... I've been typing the correct password for my network but it doesnt work!

    If you are sure that your password is correct try restarting your router by removing power to it for 30 seconds and restarting. On your iPod go to Settings > General > Reset > Reset network settings. Now try to connect.

  • Passing value to a field of SAP Program which do not have "Parameter ID"

    Dear Experts,
    My requirement is that i need to pass a value from my dialog program to a field of SAP Program which do not have "Parameter ID" attached to it.
    For example: If you run SAP Transaction CS14, it has two sections viz., Primary BOM and Secondary BOM. I need to copy and create own screen using Dialog program. The screen appears in custom screen would be similar to that of the SAP Transaction CS14. If you check the fields, all the fields have "Parameter ID" attached to it, except for the following fields which do not have Parameter IDs are "Alternative", "Valid From" and "Required Qty".
    Hence how do i pass value to those fields? Kindly help me
    To those fields where "Parameter IDs" are attached, i can use below two statements:
    Set parameter id <par> field <field>.
    call transaction 'CS14' and skip first screen.
    Regards,
    Ramesh Manoharan

    Hi Harald Boeing,
    Thanks you very much. My problem is solved.
    Rewarded Points.
    Regards,
    Ramesh Manoharan

  • Wireless card seems to be not working

    Hello everyone,
    I haven't had any problems with my wireless card for my Macbook Pro since I purchased it, but something seems to be acting up now. Here's the situation...I went away for the weekend, took my laptop with me, didn't use the internet at all. Then I came back to my wireless card not working. It has a self-assigned IP address of 169.254.183.17. I did some reading on it and what people of said is that when you have this particular address your computer can't access the internet. I have power cycled both the router and modem correctly without any success.
    I have another laptop that is windows based that can connect wirelessly so I've identified that it isn't a router problem. The thing that baffles me is that I can hard wire my Macbook into the router and achieve a connection...any suggestions on what I should try next?
    Thanks in advance.
    Message was edited by: Jaden Pretzlaw

    Thanks for replying,
    I did go into advanced settings to see what was up. And the TCP/IP tab was the area that I was focusing on. Okay...I did try renewing the DHCP lease and it keeps giving me the unusable IP address. One potential problem that may be contributing to this fiasco is that I think the modem in my household is also a router (which we're just using as a modem). The modem isn't mine so I'm not sure how it was setup. I don't believe that modem is activated to give off a wireless connection. I don't know why it would be a problem because I was connecting to the router just fine before. If the windows based laptop can connect just fine, it wouldn't be the router...(just thinking out loud here).
    I was given an option by one of our IT personal at the office that I work at...he said that I could completely remove the network from my saved list and re-enter it. He also said that I would have to delete some temporary files that are saved in a hidden folder that are "preference" files for that specific network. I wasn't able to find that folder, and I did try deleting the network but it didn't seem to fix the situation. If I could simply just go back to square one, as I did when I first connected to the network I'm sure it would fix everything.
    I hope this wasn't too long to read, hopefully it gives good insight.
    Regards
    Message was edited by: Jaden Pretzlaw

  • Keychain pass seems to randomly not work

    A week ago i could not access my MAcBook Pro (OSx 10.6.7) Went in through the admin account with the help of our IS and changed my pass and was able to get in.   renamed the old login.keychain login_old.  
    Am using 1Password to save passwords .. set not to store its master pass in the login key chain .. and Knox, an encryption package by the same company (Agile ) ...  There is a long story here related to these products .. I have been going around with their tech support ... but i think my keychain probllems are related to these products.  ... will not relate this now ..
    Now i have a login keychain with my current working pass,  and the old renamed login keychain  login_old  with the old pass that stopped working.  login_old actaully has several keychains ... including the login for encryption  program.  i cannot open this keychain, because the mast pass doesnt work ..
    When i try to access the encrypted file vault created by Knox,  i can get into vault2  but not vault1 .... the pass is the same, and the same as my old master pass.   the OS prompts me to enter the pass for Login_OLD ... which doesnt work .. when that fails, it prompts me to enter the vault pass directly ... this works for vault2 but not for vault1 ..... so i appear to be permanelty locked out of vault1.
    Yesterday, after a week of being resolved to not being able to ever recover vault1,  I tried it again,  and amazingly, the old password worked and was able to get into the vaults apparently because i logged successfully into login_old .... as soon as this happened, i moved files out of the vault ... i also looked at the passwords in the login_old .. and they were all there and exactly as i remembered them ... (Agile keeps telling me i have just forgotten the passwords).  everything seemed to be working fine .... rebooted teh machine ... and now i can no longer get into teh vaults, nor into login_old ....
    I had a similar thing happen with 1Password ... was locked out ... randomly, three times out of 50 tries, i was able to get back in ...remember, this program is not storing its password in the login keychain ... i was able to download the data during one of these episodes ..and rebuild teh 1Passowrd database ...
    So i am up and running file .... but really dont understand what is going on with these keychains ... it is like an incorrect pass is being cached somewhere, or there are two kecychains and most of the imte a PATH statment takes me to one that doesnt work but occassionaly, i get to one that works ...I want to get to the bottom of this .. as i really cant afford to have this happen again ...
    I would appreciate any help you may have .... i do have all this backed to TimeMachine ... and thought about just restoring the login keychain to prior when all the problmes stated ... but fear i could really get into trouble restoring the login keychain ....
    thanks

    A week ago i could not access my MAcBook Pro (OSx 10.6.7) Went in through the admin account with the help of our IS and changed my pass and was able to get in.   renamed the old login.keychain login_old.  
    Am using 1Password to save passwords .. set not to store its master pass in the login key chain .. and Knox, an encryption package by the same company (Agile ) ...  There is a long story here related to these products .. I have been going around with their tech support ... but i think my keychain probllems are related to these products.  ... will not relate this now ..
    Now i have a login keychain with my current working pass,  and the old renamed login keychain  login_old  with the old pass that stopped working.  login_old actaully has several keychains ... including the login for encryption  program.  i cannot open this keychain, because the mast pass doesnt work ..
    When i try to access the encrypted file vault created by Knox,  i can get into vault2  but not vault1 .... the pass is the same, and the same as my old master pass.   the OS prompts me to enter the pass for Login_OLD ... which doesnt work .. when that fails, it prompts me to enter the vault pass directly ... this works for vault2 but not for vault1 ..... so i appear to be permanelty locked out of vault1.
    Yesterday, after a week of being resolved to not being able to ever recover vault1,  I tried it again,  and amazingly, the old password worked and was able to get into the vaults apparently because i logged successfully into login_old .... as soon as this happened, i moved files out of the vault ... i also looked at the passwords in the login_old .. and they were all there and exactly as i remembered them ... (Agile keeps telling me i have just forgotten the passwords).  everything seemed to be working fine .... rebooted teh machine ... and now i can no longer get into teh vaults, nor into login_old ....
    I had a similar thing happen with 1Password ... was locked out ... randomly, three times out of 50 tries, i was able to get back in ...remember, this program is not storing its password in the login keychain ... i was able to download the data during one of these episodes ..and rebuild teh 1Passowrd database ...
    So i am up and running file .... but really dont understand what is going on with these keychains ... it is like an incorrect pass is being cached somewhere, or there are two kecychains and most of the imte a PATH statment takes me to one that doesnt work but occassionaly, i get to one that works ...I want to get to the bottom of this .. as i really cant afford to have this happen again ...
    I would appreciate any help you may have .... i do have all this backed to TimeMachine ... and thought about just restoring the login keychain to prior when all the problmes stated ... but fear i could really get into trouble restoring the login keychain ....
    thanks

  • 'D' Value in UPDMOD field getting lost in Transformation,Delete not working

    Hello all,
    We are using this datasource 0PU_IS_PS_32 for Funds management, the datasource has UPDMOD field in it, which is basically the 0RECORDMODE. So when they delete the document on R/3 side we can pick up the delete.
    Now this is what is happening in the delta infopackage, I get the delat records in the delta infopackage and I see a "D" in the UPDMOD field, but that value of D is getting lost when i load the data from PSA to the DSO through transofrmation by using DTP.
    After the request is loaded in DSO, before activating the request I check in New Data table and the field does not have a value of "D" anymore so when I activate the request the system does not know that those records are "D" delete records and so the records are not getting deleted from DSO.
    Has anyone faced this before, how can I fix it. The transformation is just one to one mapping no routines or formulas of any kind.
    Thanks for your help in advance.

    Hi,
    It is mandatory that u map upmode to 0recordmode. In the rule group there will be 2 groups. One will be ur normal mapping and other should be used to map 0recordmode
    Regards,
    Raghavendra.

  • How to "Call by Reference" when running in RealTime (path does not work)

    I have a .vi which has been "uploaded" to a PXI chassis to run in RealTime.
    I have this feeling that one of my sub-vi's are not functioning properly. I have a sub-vi which "Opens a VI reference" to a .vi located on my Windows harddrive. But, when everything is setup in Realtime, it cannot locate this .vi anymore.
    I need to load a .vi dynamicaly, multiple times. Is there another way around it?

    Yes, that worked well. I had gotten it to work, but had not replied to this post to indicate my success. My actual problem had to do with me forcing a "close front panel". I had read in some other posts that you cannot modify front panels or other user-activity type of options when running real time. By removing the "FP Close" function, the call to the specific .vi worked great (and with the addition of the IP address for the opening of a local reference). Thanks again for all the input.

  • Three monitors, one G4, cant seem to make it work, HELP!!

    i have one G4 desktop that has been using two monitors for some time now, but tonight i tried to add a third and the whole thing has gone to ****! the second display that was originaly working is no longer showing up, the new one (the third) seems to be the main problem. its slowing down the system and i cant get the computer to recognize three displays.
    anyone know how to fix this??

    Did you add another graphics card? You can't run more than two displays from one card, even though some have an extra TV port.

  • OSB jms clustering - load balancing seems to be not working

    Hi All,
    I have one admin server and two managed servers running ( one of these managed server is running in the remote linux machine) in a cluster
    I have connectionfactory created with load balance enabled with round robin
    and server affinity is disabled
    I have queue created as uniformly distributed Q
    I have a proxy service with load balancing as roundrobin and endpoint URL as below
    jms://rdoelapp001011:61703,rdoelapp001013:61703/synergyConnectionFactory1/MM_gridQ0
    If I execute this proxy sending messages it always go to one server only. There is no message going to the other server.
    If I shutdown the server that receives messages then the other server is receiving messages. Seems like fail-over is working but not the load-balancing
    There is one point may be worth mentioning here is, from the admin console if I look at the servers for the clusters it has below information
    Name      State      Drop-out Frequency      Remote Groups Discovered      Local Group Leader      Total Groups      Discovered Group Leaders      Groups      Primary      
    synergyOSBServer1     RUNNING     Never     0     synergyOSBServer1     1     synergyOSBServer1     *{synergyOSBServer1}*     0          
    synergyOSBServer2     RUNNING     Never     0     synergyOSBServer1     1     synergyOSBServer1     *{synergyOSBServer1, synergyOSBServer2}* 0
    one server has groups as {synergYOSBServer1} instead of {synergyOSBServer1, synergyOSBServer2}. Does that look correct?
    here is my jms xml file
    <?xml version='1.0' encoding='UTF-8'?>
    <weblogic-jms xmlns="http://xmlns.oracle.com/weblogic/weblogic-jms" xmlns:sec="http://xmlns.oracle.com/weblogic/security" xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/weblogic-jms http://xmlns.oracle.com/weblogic/weblogic-jms/1.1/weblogic-jms.xsd">
    *<connection-factory name="synergyConnectionFactory1">*
    *<sub-deployment-name>synergySubDeploy1</sub-deployment-name>*
    *<default-targeting-enabled>false</default-targeting-enabled>*
    *<jndi-name>synergyConnectionFactory1</jndi-name>*
    *<client-params>*
    *<client-id-policy>Restricted</client-id-policy>*
    *<subscription-sharing-policy>Exclusive</subscription-sharing-policy>*
    *<messages-maximum>10</messages-maximum>*
    *</client-params>*
    *<transaction-params>*
    *<xa-connection-factory-enabled>false</xa-connection-factory-enabled>*
    *</transaction-params>*
    *<load-balancing-params>*
    *<load-balancing-enabled>true</load-balancing-enabled>*
    *<server-affinity-enabled>false</server-affinity-enabled>*
    *</load-balancing-params>*
    *<security-params>*
    *<attach-jmsx-user-id>false</attach-jmsx-user-id>*
    *</security-params>*
    *</connection-factory>*
    <uniform-distributed-queue name="errorQ">
    <sub-deployment-name>synergySubDeploy1</sub-deployment-name>
    <default-targeting-enabled>false</default-targeting-enabled>
    <jndi-name>errorQ</jndi-name>
    <load-balancing-policy>Round-Robin</load-balancing-policy>
    <forward-delay>-1</forward-delay>
    <reset-delivery-count-on-forward>true</reset-delivery-count-on-forward>
    </uniform-distributed-queue>
    <uniform-distributed-queue name="undlvQ">
    <sub-deployment-name>synergySubDeploy1</sub-deployment-name>
    <default-targeting-enabled>false</default-targeting-enabled>
    <jndi-name>undlvQ</jndi-name>
    <load-balancing-policy>Round-Robin</load-balancing-policy>
    <forward-delay>-1</forward-delay>
    <reset-delivery-count-on-forward>true</reset-delivery-count-on-forward>
    </uniform-distributed-queue>
    *<uniform-distributed-queue name="MM_gridQ0">*
    *<sub-deployment-name>synergySubDeploy1</sub-deployment-name>*
    *<default-targeting-enabled>false</default-targeting-enabled>*
    *<jndi-name>MM_gridQ0</jndi-name>*
    *<load-balancing-policy>Round-Robin</load-balancing-policy>*
    *<forward-delay>5</forward-delay>*
    *<reset-delivery-count-on-forward>true</reset-delivery-count-on-forward>*
    *</uniform-distributed-queue>*
    <saf-imported-destinations name="synergySAFImportedDest1">
    <sub-deployment-name>synergySubDeploy1</sub-deployment-name>
    <default-targeting-enabled>false</default-targeting-enabled>
    <saf-queue name="gridQ0">
    <remote-jndi-name>MB_gridQ0</remote-jndi-name>
    <local-jndi-name>gridQ0</local-jndi-name>
    <non-persistent-qos>At-Least-Once</non-persistent-qos>
    <time-to-live-default>0</time-to-live-default>
    <use-saf-time-to-live-default>false</use-saf-time-to-live-default>
    <unit-of-order-routing>Hash</unit-of-order-routing>
    </saf-queue>
    <jndi-prefix>MB_</jndi-prefix>
    <saf-remote-context>synergySAFContext1</saf-remote-context>
    <saf-error-handling>synergySAFErrorHndlr1</saf-error-handling>
    <time-to-live-default>0</time-to-live-default>
    <use-saf-time-to-live-default>false</use-saf-time-to-live-default>
    <unit-of-order-routing>Hash</unit-of-order-routing>
    </saf-imported-destinations>
    <saf-remote-context name="synergySAFContext1">
    <saf-login-context>
    <loginURL>t3://rdoelapp001013:7001</loginURL>
    <username>weblogic</username>
    <password-encrypted>{AES}z9VY/K4M7ItAr2Vedvhx+j9htR/HkbY2LRh1ED+Cz5Y=</password-encrypted>
    </saf-login-context>
    <compression-threshold>2147483647</compression-threshold>
    </saf-remote-context>
    <saf-error-handling name="synergySAFErrorHndlr1">
    <policy>Log</policy>
    <log-format xsi:nil="true"></log-format>
    <saf-error-destination xsi:nil="true"></saf-error-destination>
    </saf-error-handling>
    </weblogic-jms>
    Any help will be greatly appriciated
    Edited by: 818591 on Feb 16, 2011 11:28 AM

    I am not getting you here "the right approach is to make OSB run on the man server cluster and not on admin server. "
    I have a jms proxy service that I created from admin console
    And also I have gone thru the step 5 in the link below
    http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/deploy/config.html#wp1524235
    If I am not wrong, the proxy service endpoint URI determines where it is pointing to. If it is a cluster environment, it should point to a clustered address
    My proxy has below endpoint URI
    jms://rdoelapp001011:61703,rdoelapp001013:61703/synergyConnectionFactory1/MM_gridQ0
    and rdoelapp001011:61703,rdoelapp001013:61703 is my cluster address
    As per your suggestion "To fix your problem, *make osb to run on the cluster* and specify the same URL for the jms proxy service"
    Could you please provide some instruction how would I "make osb jms proxy service to run in a cluster"
    As a note, I have Q defined as a distributed Q and connection factory targets to the cluster. UDQ also targtes to the cluster.
    Just for a testing I have created another manged server running local to the machine where my admin server is running
    And I created a proxy by following steps as I mentioned above and with endpoint URI as below
    jms://rdoelapp001011:61703,rdoelapp001013:61703,*rdoelapp001011:61700*/synergyConnectionFactory1/MM_gridQ0
    where the new address of my cluster is rdoelapp001011:61703,rdoelapp001013:61703,rdoelapp001011:61700
    It did create consumers in both the managed servers in the cluster that are running locally, but no consumers in the remote managed server.
    So I am kind of leaning towards thinking that there is some incorrect setup for the remote managed server and may be admin server is not able to communicate to the remote server for some reason but not sure about it..
    As a note the cluster is setup to communicate using "unicast" channel
    and I created a channel in each manged server with the same name
    here is the cluster configuration
    <name>synergyCluster1</name>
    <cluster-address>rdoelapp001011:61703,rdoelapp001013:61703,rdoelapp001011:61700</cluster-address>
    <default-load-algorithm>round-robin</default-load-algorithm>
    *<cluster-messaging-mode>unicast</cluster-messaging-mode>*
    *<cluster-broadcast-channel>synergyChannel1</cluster-broadcast-channel>*
    *<number-of-servers-in-cluster-address>3</number-of-servers-in-cluster-address>*
    </cluster>
    here are the twoOSBserver configuration
    <server>
    <name>synergyOSBServer1</name>
    <machine xsi:nil="true"></machine>
    <listen-port>61703</listen-port>
    <cluster>synergyCluster1</cluster>
    <web-server>
    <web-server-log>
    <number-of-files-limited>false</number-of-files-limited>
    </web-server-log>
    </web-server>
    <server-debug>
    <debug-scope>
    <name>weblogic.jms.saf</name>
    <enabled>true</enabled>
    </debug-scope>
    <debug-jmssaf>true</debug-jmssaf>
    <debug-saf-sending-agent>true</debug-saf-sending-agent>
    </server-debug>
    <listen-address>localhost</listen-address>
    <network-access-point>
    *<name>synergyChannel1</name>*
    *<protocol>cluster-broadcast</protocol>*
    *<listen-address>localhost</listen-address>*
    *<listen-port>61702</listen-port>*
    <http-enabled-for-this-protocol>true</http-enabled-for-this-protocol>
    <tunneling-enabled>false</tunneling-enabled>
    *<outbound-enabled>true</outbound-enabled>*
    *<enabled>true</enabled>*
    <two-way-ssl-enabled>false</two-way-ssl-enabled>
    <client-certificate-enforced>false</client-certificate-enforced>
    </network-access-point>
    <jta-migratable-target>
    <user-preferred-server>synergyOSBServer1</user-preferred-server>
    <cluster>synergyCluster1</cluster>
    </jta-migratable-target>
    </server>
    <server>
    <name>synergyOSBServer2</name>
    <ssl>
    <enabled>false</enabled>
    </ssl>
    <machine xsi:nil="true"></machine>
    <listen-port>61703</listen-port>
    <listen-port-enabled>true</listen-port-enabled>
    <cluster>synergyCluster1</cluster>
    <web-server>
    <web-server-log>
    <number-of-files-limited>false</number-of-files-limited>
    </web-server-log>
    </web-server>
    <listen-address>rdoelapp001013</listen-address>
    <network-access-point>
    *<name>synergyChannel1</name>*
    *<protocol>cluster-broadcast</protocol>*
    *<listen-address>rdoelapp001013</listen-address>*
    *<listen-port>61702</listen-port>*
    <http-enabled-for-this-protocol>true</http-enabled-for-this-protocol>
    <tunneling-enabled>false</tunneling-enabled>
    *<outbound-enabled>true</outbound-enabled>*
    *<enabled>true</enabled>*
    <two-way-ssl-enabled>false</two-way-ssl-enabled>
    <client-certificate-enforced>false</client-certificate-enforced>
    </network-access-point>
    <java-compiler>javac</java-compiler>
    <jta-migratable-target>
    <user-preferred-server>synergyOSBServer2</user-preferred-server>
    <cluster>synergyCluster1</cluster>
    </jta-migratable-target>
    <client-cert-proxy-enabled>false</client-cert-proxy-enabled>
    </server>
    <server>
    Edited by: 818591 on Feb 18, 2011 11:26 AM

  • Trying to use AX as an extender and wired point but can't seem to make it work, help plz

    Hello,
    I'm currently using a ISP supplied huawei HG8245, and using an AX to supply the lower floor satellite receiver with a wired connection and was also hoping to use it as a range extender for the huawei, but failed so far the wired point is working, and light is green, but as soon as i flip it into "extend wireless network"  it goes yellow with the error that it cant extend the netwrok.
    i tried looking around the huawei set up but cant seem to find the equivalent of "allow network extension" but so far nothing is coming up.
    i would appreciate some help...

    Unfortunately, Apple's "extend a wireless network" appears to be a proprietary function that will only work among Apple routers, if you are trying to extend your network wirelessly.
    Another way of saying the same thing is that you need to have two Apple routers on the network to be able to "extend a wireless network".
    Here is what Apple's product literature for the AirPort Express says about this subject:
    Extend an existing Wi-Fi network’s range.
    If you already have a wireless network in your home and want to extend its range, AirPort Express can help. Just place it in range of your primary base station — an AirPort Extreme, Time Capsule, or another AirPort Express
    Ironically, the AirPort Express will "join" virtually any wireless network and the Ethernet port is enabled in this type of setup. But, the AirPort Express will not provide any additional wireless signal coverage when it "joins" a wireless network.

  • My email seems to be not working.

    I always used my iPod touch for looking at email, along with everything else, so it was always in my "menu bar" at the bottom. Until recently I have not been able to recieve/send emails. I would say this problem started around Wednesday (October 1st). If I saw any message numbers I would usually just glance at who they were from and then if it was a quick response, I would just do it from my iPod. But most of the time I would use my laptop to do that. But one day I was getting curious why I wasn't getting any email. So I opened up Mail on my laptop and I have 30 messages!
    Now how come my iPod isn't displaying I have any messages? And I even opened it manually and checked...it just kept saying "chekin for new messages" for about 7 minutes. I looked in the options for Mail and everything seemed to be fine.
    What should I do?

    some people report mail issues with varoius email services
    gmail seem to work pretty well though so maybe
    the issue is related to those services
    unless the ports and other email settings are set wrong

  • App cache seems to be not working in the latest firefox

    In a new app we developed which has offline support with the help of HTML5 appcache feature. We noticed that with the latest update from FF (27.0+) the appcache stopped working and it's not caching any of the resources specified in the .manifest file. In the Tools - Options - Advanced - Network tab also it shows as 0 Bytes from the domain. But at the same time it works fine on Chrome as it is properly showing all the cached resources from the domain. Is this some kind of bug in the latest FF or are we missing something from our end to make the FF cache the resources.
    Please let me know if you would require more details for this issue.
    Any help would be really appreciated.

    See if this helps you - https://developer.mozilla.org/en-US/docs/HTML/Using_the_application_cache
    ''Note at the bottom of that page: Last updated: Mar 8, 2014 1:14:17 AM''

  • Update value of current field by firing key-f3 is not working

    oracle 8i
    hey,
    I implemented a key-f3 trigger wich should insert the sysdate into the current field.
    :ab.von := sysdate;
    this works perfectly. but when I want to write a standart trigger, wich I could copy in every formfield like the example, it doesnt work and the message frm 41803 is shown, "no prefius datarecord aviable, from wich could be copied
    declare new_date date;
    begin
    if Get_Item_Property(:system.cursor_item, DATATYPE)='DATE' then
    Copy( to_date(sysdate,'DD.MM.JJ'), :System.Cursor_Item);
    end if;
    end;
    could anyone tell me where I have my mistake or if there is a easier way to solve the problem
    mfg
    robert

    ok, it works
    what I dont understand is, what for is then the trigger key-f3, when is it firing? and what is the use?
    how could I make a trigger to use for example strg+d to insert the sysdate or any other key
    where do I find the programm oracle terminal?
    what F-? keys are not used witch I could use?
    thanks anyway, my function is working with your information
    mfg
    robert

Maybe you are looking for

  • How can I reduce the time it takes to render my clips?

    I'm working on a MacBook Pro, 2.4 GHz Intel Core 2Duo machinewith 4 GB 667 MHz DDR2 SDRAM, usinf Final Cut Pro 6. In my current project I have one clip that's about 40 minutes long. I recorded separate audio on a Zoom H4n and the audio clip is even l

  • Windows 8 and need a fix to use my hp photosmart 7150

    I have windows 8 xp 64 bit, is there a fix to be able to install my HP photosmart 7150 printer.

  • ITunes Update Win 8.1

    Trying to update iTunes from 11.2.3.8 to recommended update Mar 2014, repeatedly hangs up install with "Could not access network location".  Same response on auto-update or download only and then manual update.  Have not seen this update hangup befor

  • Opening IPhoto Library in Photoshop 4.0

    I am having problems accessing the IPhoto Library through Photoshop 4.0. Before I upgraded my IPhoto the library was considered an ordinary folder but now it is "greyed" out. It seems I can only access my pictures through IPhoto itself. What should I

  • PNP for HR programming

    Hi, I would like to use PNP for my HR Interface programming.  All my programs will become as a batch programs. However I a bit worry if could have performance issue if I’m using PNP due to many data in database.  May I know the limitation of using PN