Passing values to a select option through submit

hi all,
i am using the following code to submit report.
SUBMIT :rko7co88 USING SELECTION-SET 'ZTEST_PS'
                 WITH SELECTION-TABLE seltab
                 WITH perio = v_month
                 WITH gjahr = v_year
                 WITH vaart = c_1.
the table seltab is being populated as shown below.
LOOP AT i_aufnr INTO i_aufnr_wa.
seltab_wa-selname = 'AUFNR'.
seltab_wa-sign = 'I'.
seltab_wa-kind = 'S'.
seltab_wa-option = 'EQ'.
seltab_wa-low = i_aufnr_wa-aufnr.
APPEND seltab_wa TO seltab.
CLEAR seltab_wa.
ENDLOOP.
but when i run this program it gives a short dump saying program has excceded the maximum time permited.
the problem seems to be with passing table seltab to select option, because when i run the program witout that statemant "WITH SELECTION-TABLE seltab" . it works fine.
in seltab i have selected only open orders which r confirmed, when i run the program without passing seltab it takes all the orders and works fine but according to my requirement i have to run the program for only open orders.
pls suggest the way out.
thanks
pankaj sharma

Hi pankaj,
1. I tried the same thing, and now its working fine.
2. I also used the extension of submit
<b> via selection-screen.</b>
to temporarily check what values are going in the screen.
3. just copy paste to get a taste of it.
4. Values 11111, 2222 will come in AUFNR.
5.
report abc.
DATA : SELTAB LIKE RSPARAMS OCCURS 0 WITH HEADER LINE.
SELTAB-SELNAME = 'AUFNR'.
SELTAB-KIND = 'S'.
SELTAB-SIGN = 'I'.
SELTAB-OPTION = 'EQ'.
SELTAB-LOW = '11111'.
APPEND SELTAB.
SELTAB-SELNAME = 'AUFNR'.
SELTAB-KIND = 'S'.
SELTAB-SIGN = 'I'.
SELTAB-OPTION = 'EQ'.
SELTAB-LOW = '222222'.
APPEND SELTAB.
submit RKO7CO88
WITH perio = '001'
WITH gjahr = '2006'
WITH vaart = '1'
WITH SELECTION-TABLE SELTAB
via selection-screen.
regards,
amit m.

Similar Messages

Value help for select options (pass the selected values to the select opt)

Hi everyone,
I created a custom value help for my select options.
It works fine, when the user clicks on the value help, my own view is displayed, and the user can select the required values:
lt_range_table =
wd_this->m_handler->create_range_table(
i_typename = 'ORGEH' ).
* add a new field to the selection
wd_this->m_handler->add_selection_field(
i_id = 'ORGEH'
i_value_help_id = 'MYSO'
i_value_help_type = IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_APPLDEV
it_result = lt_range_table
i_read_only = read_only ).
The problem is, how can I pass the values to the select option? When the user selects the values in my view, I have them in an internal table. But how can i pass these values to the select option? I suppose there is declared method for this... but which one?
Thanks
N.

Sorry for the stupid question, but it seems I can't acces my attribute:
I create it in the component controller
NODE: 'APP_DATA'
Attribute: M_HANDLER TYPE IF_WD_SELECT_OPTIONS
Cardinality 1..1
Selection 1..1
Singleton = 'X'
I pass the values int he EDOINIT method of MAIN view:
* Get compnent controller API
lo_component = wd_comp_controller->wd_get_api( ).
lo_controller ?= lo_component.
* Get the controler context node
CALL METHOD LO_CONTROLLER->GET_CONTEXT
    RECEIVING
      CONTEXT = lo_context.
*Get the root node
lo_node = lo_context->root_node.
*Get the child node
lo_child = lo_node->get_child_node( 'APP_DATA' ).
ls_app_data-m_handler = wd_this->m_handler.
lo_child->bind_structure( ls_app_data ).
After this code I test it if the binding is correct:
DATA: ls_test TYPE wd_comp_controller->element_app_data.
CALL METHOD LO_CHILD->GET_STATIC_ATTRIBUTES
IMPORTING
    STATIC_ATTRIBUTES = ls_test.
The lstest is correct_. It has the reference for the SelectOption
Now, in the SEL_TREE View:
* Get compnent controller API
lo_component = wd_comp_controller->wd_get_api( ).
lo_controller ?= lo_component.
* Get the controler context node
CALL METHOD LO_CONTROLLER->GET_CONTEXT
    RECEIVING
      CONTEXT = lo_context.
*Get the root node
lo_node = lo_context->root_node.
*Get the child node
lo_child = lo_node->get_child_node( 'APP_DATA' ).
*Get the data from the node
CALL METHOD LO_CHILD->GET_STATIC_ATTRIBUTES
    IMPORTING
      STATIC_ATTRIBUTES = ls_app_data.
wd_this->m_handler = ls_app_data-m_handler.
The ls_app_data-m_handler is INITIAL. There is no value in it.
What did I do wrongly?
Please help
Thanks
N.

How to get all the values in the Select-option.

Hi,
I got the select-option field so_week, for eg. If I give 200923 to 200926 (year and week) in the selection screen and then I need to pass this value (200923) to the FM 'ZWEEK_GET_FIRST_DAY' to get the first day of the week.
My question is how can i get all the values from the select option, (i.e) i need to get 200923, 200924,200925, 200926.
Regards,
Anbu.

Hello,
I will prefer Max's solution. But just for the sake of this req.
i need to get 200923, 200924,200925, 200926
i am proposing my soln:
DATA: V_WEEK TYPE RSCALWEEK.
SELECT-OPTIONS: S_WEEK FOR V_WEEK NO-EXTENSION OBLIGATORY.
AT SELECTION-SCREEN.
DATA:
V_COUNT TYPE I,
V_ADD   TYPE I,
RT_WEEK TYPE RANGE OF RSCALWEEK,
RS_WEEK LIKE LINE OF RT_WEEK.
V_COUNT = ( S_WEEK-HIGH - S_WEEK-LOW ) + 1.
DO V_COUNT TIMES.
    RS_WEEK-SIGN = 'I'.
    RS_WEEK-OPTION = 'EQ'.
    RS_WEEK-LOW = S_WEEK-LOW + V_ADD.
    APPEND RS_WEEK TO RT_WEEK. "RT_WEEK--> Will contain the week values
    CLEAR RS_WEEK.
    V_ADD = V_ADD + 1.
ENDDO.
@Max: I was stupid enough not to think of your solution. Need to leave office
Cheers,
Suhas

F4 Value Help in select option

Hi ,
I have created one WD component as value F4 help to use into another component's select option. I am able to use this component in the Input Field UI element by selecting free programming as input help mode and name of this component used as input help component usage . I dont know how to pass this component in select option . can any one help me please to do this functionality.
Thanks ,
Aashish

I have not tried them out please check it -
IN IF_WD_SELECT_OTPIONS~ADD_SELECTION_FIELD parameters list
I_VALUE_HELP_TYPE     Importing     Like     IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_NONE
I_VALUE_HELP_ID     Importing     Type     WDY_VALUE_HELP_ID
I_VALUE_HELP_MODE     Importing     Type     WDY_MD_VALUE_HELP_MODE_ENUM
I_VALUE_HELP_STRUCTURE     Importing     Type     DDOBJNAME
I_VALUE_HELP_STRUCTURE_FIELD     Importing     Type     FIELDNAME
I_HELP_REQUEST_HANDLER     Importing     Type Ref To     OBJECT
we have to use them -
pass the FVS type to I_VALUE_HELP_TYPE = IF_WD_VALUE_HELP_HANDLER=>CO_VH_TYPE_BACKEND (check for teh other attributes in IF_WD_VALUE_HELP_HANDLER) or IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_APPLDEV
to this I_VALUE_HELP_ID i think we have to either pass the FVS comp usage name or FVS webdynpro component name
I guess this is also used I_HELP_REQUEST_HANDLER - i think we need to pass the object reference of FVS or somethihg like that..
Make sure you given them in CAPS for these parameters.
Just try them out....Hope this helps

Clearing the displayed value for a SELECT-OPTION

How do I clear the displayed value of a SELECT-OPTION?
I have 2 SELECT-OPTIONs on my screen (standard basic report program screen). I use code like this to populate the drop-down boxes for each one.
=====
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_prgrp-low.
PERFORM fill_prgrp_values.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_prctr-low.
PERFORM fill_prctr_values.
=====
The value the user picks for the first SELECT-OPTION will affect what values I put in the drop-down list for the second SELECT-OPTION.
If a user enters a value for the second SELECT-OPTION, and then goes back and changes the value of the first SELECT-OPTION, then I want to do two things:
1. Create a new set of values for the drop-down list for the second SELECT-OPTION (no problem; working fine);
2. Clear the displayed value from the second SELECT-OPTION that the user entered previously. That value became invalid when the user picked a new value for the first SELECT-OPTION.
How do I clear that second displayed value?
I have tried CLEAR and REFRESH for the second variable using the formats s_prctr, s_prctr[], and s_prctr-low. They will erase the values of the internal table or part(s) of it, but the displayed value stays on the screen.
I need to clear out the displayed value so the user will either leave it blank or enter or select a new value.
I am using F4IF_INT_TABLE_VALUE_REQUEST to build the drop-down lists, and it works fine, but I do not see any function module to clear the displayed value off the screen.
Thanks for your help.

Sorry, but calling DYNP_VALUES_UPDATE did not work. This is how I coded it.
fld_reset_rcd-fieldname = 'S_PRCTR'.
fld_reset_rcd-stepl      = sy-stepl.
CLEAR fld_reset_rcd-fieldvalue.      " re-initialize s_prctr
CLEAR fld_reset_rcd-fieldinp.        " what goes in here?
APPEND fld_reset_rcd TO fld_reset_tbl.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
    EXPORTING
      dyname = 'ZFI_GL_BALANCE_NGL'
      dynumb = '1000'
    TABLES
      dynpfields = fld_reset_tbl
<Added code tags>
I have discovered that CLEAR and REFRESH of s_prctr will clear it somewhat. If I enter multiple values, ranges, etc., they will all be cleared, EXCEPT for the one single value that is displayed on the main screen. It is not cleared and it remains if you push the button to display the pop-up to enter ranges, etc.
To devrath.sampat -- Thanks for your example for building the drop-down list, but that is not the problem I am having. I am already able to build it just fine.
To repeat my problem, if I:
1. first enter / select a value for the first SELECT-OPTION s_prgrp
2. then enter / select a value for the second SELECT-OPTION s_prctr
3. And finally go back and select a new value of the first SELECT-OPTION s_prgrp from its drop-down list,
     when I do, the program needs to clear the value displayed on the main screen for the second SELECT-OPTION s_prctr (any additional values, ranges, etc., are cleared by CLEAR and REFRESH, if I go look; but not the value shown on the main screen).
Edited by: Scott Crosby on Feb 14, 2012 4:20 PM
Edited by: Suhas Saha on Feb 15, 2012 12:03 PM

On value request in select-options in a repot URGENT

Hi all,
my requirement is to provide on value request in select-options
in selection screen Gsdpr user one select-option is there
For GSDPR User field, provide F4 help. Users list can be selected from ZWF_UPI table where WF_UPI_TYPE is HR. From the table, select UPI Number and employee full name fields
in ZWF_UPI table the key fields are UPI and WF_UPI_TYPE
non key field is emp_full_name.
please send me the code .
regards
Nagendra

Hi,
I do not have sample code , But you have to use the function module
F4IF_INT_TABLE_VALUE_REQUEST on the AT-SELECTION-SCREEN ON VALUE REUQEST FOR S_OPTION-LOW event
Select Data as per the requirement into Value table of the Function module
Return the Data fro the Return table of the function module.
The good choice will be Go to SE37-> Type this FM F4IF_INT_TABLE_VALUE_REQUEST and look for Where used list-> Programs . There u will get the list of programs used this FM
Regards
Pavan

Passing select options through subroutines

Hi
how do you pass select option values through subroutines?

Hello,
Is this what you are looking for:
TYPES: ty_r_bukrs TYPE RANGE OF bukrs.
DATA:
      v_date TYPE datum,
      v_bukrs TYPE bukrs.
SELECT-OPTIONS:
s_bukrs FOR v_bukrs OBLIGATORY,
s_date FOR v_date.
AT SELECTION-SCREEN.
PERFORM f_check_cocd
USING s_bukrs[].
*&      Form f_check_cocd
*       Check Comp. Code
FORM f_check_cocd
USING fp_s_bukrs TYPE ty_r_bukrs.
DATA: l_v_bukrs TYPE bukrs.
SELECT bukrs UP TO 1 ROWS
FROM t001
INTO l_v_bukrs
WHERE bukrs IN s_bukrs.
ENDSELECT.
IF sy-subrc <> 0.
*   Throw Error Message
ENDIF.
ENDFORM.                    " f_check_cocd
BR,
Suhas

I need to pass multiple select options using submit and reutrn

dear all,
my requirement is i need to pass multiple values for work center like(biw01,biw02,biw03    etc) for this iam giving as biwl* and biot* for the tcode zpp_hmm ,using this i am going to get total working hours of perticular equiment.
for this iam using submit and return query but iam unable to pass multiple work centers as input.
my code is
DATA : z_budat TYPE RANGE OF budat,
       wa_budat LIKE LINE OF z_budat.
wa_budat-low = '20111001'.
wa_budat-sign = 'I'.
wa_budat-option = 'BT'.
wa_budat-high = '20111031'.
APPEND wa_budat TO z_budat.
CLEAR wa_budat.
*wa_budat-High = '20111031'.
*wa_budat-sign = 'I'.
*wa_budat-option = 'BT'.
*append wa_budat to z_budat.
DATA : z_arbpl TYPE RANGE OF arbpl,
       wa_arbpl LIKE LINE OF z_arbpl.
wa_arbpl-low = 'BIWL*'.
wa_arbpl-sign = 'I'.
wa_arbpl-option = 'EQ'.
APPEND wa_arbpl TO z_arbpl.
CLEAR wa_arbpl.
wa_arbpl-high = 'BIOT'.
*wa_arbpl-sign = 'I'.
*wa_arbpl-option = 'BT'.
*APPEND wa_arbpl TO z_arbpl.
SUBMIT   zpp_rep_hemm_perf WITH s_bukrs = '1004' WITH s_budat IN z_budat WITH      s_werks = 'SMJT'
               with   S_ARBPL IN Z_ARBPL USING SELECTION-SCREEN '1000' AND RETURN.
but my doubt is whether it is corect or wrong what ever i am passing inputs for arbpl.
thanks in advance.

You can pass all parameter (rsparams-kind = 'P') and select-options (rsparams-kind = 'S') as a single internal table of type RSPARAMS. Go on appending the field names and values as rows and pass using SELECTION-TABLE parameter of SUBMIT command.
I gave appending one set of selection values for s_budat field but you can go on appending more values for s_budat and other fields.
DATA: lt_rsparams TYPE TABLE OF rsparams,
      ls_rsparams TYPE rsparams.
CLEAR ls_rsparams.
ls_rsparams-selname = 'S_BUDAT'.
ls_rsparams-kind = 'S'.
ls_rsparams-sign = 'I'.
ls_rsparams-option = 'BT'.
ls_rsparams-low = '20111001'.
ls_rsparams-high = '20111031'.
APPEND ls_rsparams TO lt_rsparams.
SUBMIT zpp_rep_hemm_perf WITH SELECTION-TABLE lt_rsparams
                  USING SELECTION-SCREEN '1000'
                  AND RETURN.

How to design select-option through screen painter

I am new to screen painter. I want to make a screen having range of values high/low (just like select-option)......How can I do this using screen painter?

Hi!
Method 1
a) Create a subscreen area in your screen layout where you want to create the select options.
b) In the top include of your module pool program declare a selection screen as a subscreen e.g.
       SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
             select-options s_matnr for mara-matnr.
       SELECTION-SCREEN END OF SCREEN.
c) In the PBO and PAI of the main screen where the select options needs to be created do a call subscreen of the above screen (100).
       CALL SUBCREEN sub_area INCLUDING
This call subscreen statement is necessary for transport of values between screen and program.
Note: All validations of the selection screen fields e.g. the s_matnr field created above should be done in selection screen events like AT SELECTION-SCREEN etc and not in PAI. These selection screen validations etc should be done in the top include only.
Method 2
a) Create 2 separate fields in your screen layout - one for the low value and one for the high value. Insert an icon beside the high value which will call the multiple selections popup screen on user command. Use function module COMPLEX_SELECTIONS_DIALOG to achieve this.
struc_tab_and_field-fieldname   = con_cust.      " 'KUNNR'
struc_tab_and_field-tablename = con_kna1.     " 'KNA1'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
          EXPORTING
          TITLE                   = ' '
            text                         = g_titl1                                " 'Customers'
            tab_and_field     = struc_tab_and_field
          TABLES
            RANGE                   = rng_kunnr
          EXCEPTIONS
            NO_RANGE_TAB          = 1
            CANCELLED                    = 2
            INTERNAL_ERROR     = 3
            INVALID_FIELDNAME = 4
            OTHERS                           = 5.
IF NOT rng_kunnr[] IS INITIAL.
         Read the very first entry of the range table and pass it to
         dynpro screen field
           READ TABLE rng_kunnr INDEX 1.
           IF sy-subrc = 0.
              g_cust = rng_kunnr-low.
           ENDIF.
You can use the return table rng_kunnr to populate your own internal range table with the values entered by the user. Basically here you are just simulating the work of a select-options parameter by module pool screen elements
You can go with it also ....
Re: Select-options in dynpro
Regards....

How to pass Multiple entries of select-options to FM

Hi friends,
        i need to pass values date_from and date_to of FM BAPI_AR_ACC_GETSTATEMENT in my report. i have select-option in the selection screen for the posting date i.e, s_pstgdate-low = date_from and s_pstgdate-high = date_to.
    My question is how to pass values if the user enters multiple entries in s_pstgdate (selection-screen).
    Hope i'm clear with my question.
    Thanks in anticipation.
Regards
Poorna

Hi,
This is not possible.
You may wish to call it multiple times with each row of your select-option, and consolidate the returned records.
Better is to restrict the select-option with no-extension.
cheers,

Populating select-options through code

Hi Experts,
I have a requirement like in my selection screen I will have a select-options which will be input disabled. But in the initialization event I want to populate some values through coding. How can I populate multiple values. I should not use variant. I have to code only.
Expecting your help,
Venkatraman.

Hi,
As problem has Solved but following my Sample Code can help People who will Search, in fact i am posting this one because it is different from all the previous replies i am using Macro to populate Select-Options or you can do the Same for Ranges.
DEFINE fill_select_options.
clear: &1. &1-sign = &2. &1-option = &3. &1-low = &4. &1-high = &5. append &1.
END-OF-DEFINITION.
SELECT-OPTIONS: sodate FOR sy-datum.
INITIALIZATION.
fill_select_options sodate 'I' 'BT' '20080101' '20080131'.
fill_select_options sodate 'E' 'BT' '20080110' '20080115'.
fill_select_options sodate 'I' 'EQ' '20080201' '20080201'.
fill_select_options sodate 'I' 'EQ' '20080205' '20080205'.
Regards,
Faisal

Result of the query is not filtered as value given in Select Option variabl

Hello ,
A Select option Variable is created on Navigational Attribute( ZINV_PROG) of 0WBS_ELEMT.
The Compound Key for object ZINV_PROG(Investment program) is APPR_YEAR( Approval Year)
This ZINV_PROG object does not bear Master data.
The values in the field get populated as you load Master data of 0WBS_ELEMT.
The values for this objects is as shown below:
APPR_YEAR ZINVPROG
2005 ESCCCAPS
2007 ESCCCAPS
2008 FIRE
2006 CAPITAL
A select option variable is craeted on this Navigational attribute.
When you execute the query , On the selection screen of the query..
If you provide i/p for Investment programm field as 2007 ESCCCAPS, the data should ideally be filtered for this values only.
But the result of the query shows data for both values 2005 ESCCCAPS and as well as for 2007ESCCCAPS.
Let me know how to sort this issue.
Points will be assigned for the correct and helpfull answere.
Thanks,

Thanks Srini for your prompt explanation.
My Question is if Approval year is a compounded key of ZINV_PROG object why data would not get filter out directly.
I mean on the screen for this particualr variable i take help - F4 to see values there you are able to see all the values of Investment programm along with the apprroval year.
If i select value as 2005 ESCCCAPS from the help F4 screen then ideally data should be fileterd out for this particular value. But it is not happening so.
Is that so in Query desgining that if you creating a variable on Nav Attribute, and that particular Nav attribute has a compound key then if you want to filter out the data for this Nav attribute correctly you would also require to create a variable for Compound key also.
Please let me know
Thanks

Adding default value for a select-options in a selection-screen

hello gurus,
i have a report program with the following select-options in a selection-screen block:
select-options: so_site for MyTable-werks.
i want the so_site to have a default value once the program displays. can it be possible?
regards,
sid

Hi sid,
1. Whenever we use select-option,
an internal table of type range is
automatically created.
2. so, in fact, we have to put
record in this internal table.
3. eg. Just copy paste in new program.
4.
report abc.
tables : t001.
select-options : bukrs for t001-bukrs.
initialization.
bukrs-sign = 'I'.
bukrs-option = 'EQ'.
bukrs-low = '1000'.
append bukrs.
regards,
amit m.

Personalised Value Help in Select-Option field WD ABAP

Hi
I would like to know how I could provide the user with generic value help. I am using the Select Options in a Web Dynpro(ABAP) Application.
Regards
Faaiez

Hi
The key word here is "generic value help". This means the values that I want to fill the drop down with changes all the time based on various criteria. I need to fill the help values within the ABAP code based on the values in internal tables.
Regards
Faaiez

Return Value of a Select List with Submit

I have a Select List with Submit (P8_COLOR) which I want to use to filter the data in my report.
P8_COLOR has 3 static values ALL, RGB, BYP that return ALL,RGB and BYP.
When the page is submitted, my SQL Query (PL SQL function body returning SQL Query) does not recognize the return value. I can assign the return value to a different textfield and can see the correct value being assigned.
My PL SQL looks like below...
IF :P8_COLOR = 'RGB' THEN
q := q || ' AND COLOR_ID in (1,2,3)
END IF;
I am not a PL SQL expert and wonder whether the IF condition is correct. Would appreciate any help with this.
Thanks,
Ghazi

Thanks Jes. That worked.
Would you know why :P8_COLOR didn't work? What is the difference between using :P8_COLOR and v('P8_COLOR')? I am using :P8_XXXX for another Select List that only checks for null and that works. The one where I am checking for the return value doesn't work.
Thanks again.
-Ghazi

Passing values to a select option through submit

Similar Messages

Maybe you are looking for