Passive Authentication redirection fails for WP8.1
The WP is an HTC 8X running OS Version 8.10.14219.341. The Lync client on the phone is running 5.6.1308.0.
I get the following notification/error message that the certificate is not issued from a trusted CA:-
https://twitter.com/shawnharry/status/489872294807089152/photo/1
The Lync client is redirected to ADFS as normal, as pAuth is enabled on the pool/registrar but the ADFS form does not load because of this certificate issue.
The certificate chain is definitely trusted by the phone as when i browse to the sign in page on the ADFS server using IE on the phone there are no certificate prompts and the certificate is shown as trusted:- https://adfsserver.domain.com/adfs/ls/idpinitiatedsignon.htm
(I'm using ADFS 3.0 on Windows 2012 R2)
This problem only presents itself on WP 8.1. Iv tested with Windows 8.1 Lync Windows Store App, iOS 7, and Android KitKat against the same ADFS server and Lync Installation with no issues at all. Ironically
only Windows Mobile presents with this issue. From a device point of view WP 8.1 is up to date as is Lync. There doesn't appear to be any setting in IE that allows me to bypass this erroneous prompt.
Any ideas?
Hi scurla,
For WP8 root certificates need to have HTTP URLs in the CRL (Certificate Revocation List). If root certs doesn’t contain these CRL attributes than the certificate won’t be accepted by WP8 and
sign-in would fail.
Currently the WP8/8.1 Lync client requires the ability to locate and access the Certificate Revocation List (CRL) for the Certificate Authority (CA) which issued the server certificate to the
Lync server that it attempts to sign-in to. If the client is unable to validate that the certificate issued to the authenticating server has not been revoked then the client will display a generic error that it is unable to contact the server.
Additionally if the standard Windows Lync 2013 client is installed on a workstation which is not a member of the same Windows domain as the Office Web App server then it will be unable to participate in PowerPoint sharing sessions.
This issue only impact who use the internal CA, as public certificates issued by trusted third-party CAs all provide access to their CRLs by default.
To create a Certificate Revocation List Distribution Point for your internal Certification Authority, please refer to the following article.
http://blogs.technet.com/b/nexthop/archive/2012/12/17/creating-a-certificate-revocation-list-distribution-point-for-your-internal-certification-authority.aspx
A similar case for your reference.
https://social.technet.microsoft.com/Forums/lync/en-US/d7c751fa-599d-4965-842c-39925e773fb0/lync-mobile-with-windows-phone-8?forum=ocsmobility
Best regards,
Eric
Similar Messages
-
ISE 1.2 patch 6 - All Authentications begin failing after about 20 minutes
Hi all,
Another strange one I am throwing out to the forum. Basically I have a 5 node deployment (1 x Primary Admin, 1 x Primary Monitoring, 1 x Secondary Admin/Monitoring and 2 x Policy Nodes). The primary authentication method is EAP-TLS or PEAP for wireless only. The deployment in question has been in pilot for about 3 weeks with no issues what so ever.
As of this morning we rolled into production and all seemed well - about 100 users successfully authed against PSN1 (PSN2 is configured in the WLC as a secondary radius). About 30 minutes after the production rollout authentications began failing for the exact same reason (see attached radius log). I checked all of the certificates as recommended in the log but this was a matter of course in that everything is as it should be.
My next step was to essentially stop PSN1 (application stop ise) to see if the issue was a problem on the second PSN. All authentications were now succeeding via PSN2. I left it this way for 30 minutes with no drama. I started PSN1 again and authentications began to work....20 minutes later the issue was back. I replicated this issue again to be sure.
At this point I decided to deregister PSN1 and application reset the node before rejoining with the ISE deployment. Authentications worked well until about 30 minutes later when the issue reappeared. At this point I reloaded all nodes in the ISE deployment to see if this made a difference but the issue still remained.
Currently I have PSN1 shutdown and all is functioning well - anyone have any ideas??I got this fixed via TAC. Basically the following is the bug but it is worth noting that this deployment was a fresh build of 1.2
https://tools.cisco.com/bugsearch/bug/CSCuj17272/?reffering_site=dumpcr
Symptom:
all auth fails when using the existing identity source sequences after upgrade from 1.1.3 to 1.2.
Conditions:
upgrade from 1.1.3 to 1.2 build 899 breaks all auth using identity sequences.
Basically the fix was to recreate my ID sequences and reapply to the authentication policy. This fixed the issue on the policy node in question. -
When i was run my web application in everyday morning(after that issue was not reproduced), it was immediatly redirected to logout page
while i perform any task after login.Session_end function was called unfortunately.
Event log as follows
Event code: 4005
Event message: Forms authentication failed for the request. Reason: The ticket supplied was invalid.
Event time: 10/10/2014 10:36:33 AM
Event time (UTC): 10/10/2014 5:06:33 AM
Event ID: a268f3dd45da406dadd78773a858067f
Event sequence: 4
Event occurrence: 1
Event detail code: 50201
Application information:
Application domain: 463c736b-2-130573911817035712
Trust level: Full
The output while session_end() was called is as follows
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\mscorlib\v4.0_4.0.0.0__b77a5c561934e089\mscorlib.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Program Files\Common Files\Microsoft Shared\DevServer\11.0\WebDev.WebServer40.exe'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\WebDev.WebHost40\v4.0_11.0.0.0__b03f5f7f11d50a3a\WebDev.WebHost40.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Windows.Forms\v4.0_4.0.0.0__b77a5c561934e089\System.Windows.Forms.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Drawing\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Drawing.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.Web\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Caching\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Runtime.Caching.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Build.Utilities.v4.0\v4.0_4.0.0.0__b03f5f7f11d50a3a\Microsoft.Build.Utilities.v4.0.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.JScript\v4.0_10.0.0.0__b03f5f7f11d50a3a\Microsoft.JScript.dll'
A first chance exception of type 'System.ArgumentNullException' occurred in System.Core.dll
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.CSharp\v4.0_4.0.0.0__b03f5f7f11d50a3a\Microsoft.CSharp.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.IdentityModel\v4.0_4.0.0.0__b77a5c561934e089\System.IdentityModel.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Activation\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Activation.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Web\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Web.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Activities\v4.0_4.0.0.0__31bf3856ad364e35\System.Activities.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Activities\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Activities.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.WorkflowServices\v4.0_4.0.0.0__31bf3856ad364e35\System.WorkflowServices.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Extensions\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.Extensions.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Data.DataSetExtensions\v4.0_4.0.0.0__b77a5c561934e089\System.Data.DataSetExtensions.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml.Linq\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.Linq.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ComponentModel.DataAnnotations\v4.0_4.0.0.0__31bf3856ad364e35\System.ComponentModel.DataAnnotations.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.DynamicData\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.DynamicData.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.ApplicationServices\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.ApplicationServices.dll'
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\d2ac696f\807ca1a9_01cccf01\AjaxControlToolkit.dll'
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\0ff769a3\738a1ab9_47e4cf01\myapp.dll', Symbols loaded.
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\48c5da56\c38dd5b4_47e4cf01\WPCSCore.dll', Symbols loaded.
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\1c6f45a6\dd41c2e2_8ed8cf01\wpcsLibrary.dll', Symbols loaded.
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\6a813290\35d3aedf_8ed8cf01\WPWebControls.dll', Symbols loaded.
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Web.PageInspector.Loader\v4.0_1.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Web.PageInspector.Loader.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.WebPages.Deployment\v4.0_1.0.0.0__31bf3856ad364e35\System.Web.WebPages.Deployment.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.WebPages.Deployment\v4.0_2.0.0.0__31bf3856ad364e35\System.Web.WebPages.Deployment.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xaml\v4.0_4.0.0.0__b77a5c561934e089\System.Xaml.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Web.PageInspector.Runtime\v4.0_1.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Web.PageInspector.Runtime.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Web.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Web.Infrastructure.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.RegularExpressions\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.RegularExpressions.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.Wrapper.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Data.Services.Design\v4.0_4.0.0.0__b77a5c561934e089\System.Data.Services.Design.dll'
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\App_global.asax.3ly5lssc.dll', Symbols loaded.
A first chance exception of type 'System.Threading.ThreadAbortException' occurred in mscorlib.dll
A first chance exception of type 'System.Threading.ThreadAbortException' occurred in mscorlib.dll
A first chance exception of type 'System.Threading.ThreadAbortException' occurred in System.Web.dll
A first chance exception of type 'System.Threading.ThreadAbortException' occurred in mscorlib.dll
'iexplore.exe' (Script): Loaded 'Script Code (Windows Internet Explorer)'.
The thread '<No Name>' (0x2178) has exited with code 0 (0x0).
The thread '<No Name>' (0x22c0) has exited with code 0 (0x0).
The thread '<No Name>' (0x3c4) has exited with code 0 (0x0).
The thread '<No Name>' (0x2198) has exited with code 0 (0x0).
The thread '<No Name>' (0x19e0) has exited with code 0 (0x0).
The thread '<No Name>' (0x21c8) has exited with code 0 (0x0).
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.JScript\v4.0_10.0.0.0__b03f5f7f11d50a3a\Microsoft.JScript.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Web.PageInspector.Loader\v4.0_1.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Web.PageInspector.Loader.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.WebPages.Deployment\v4.0_1.0.0.0__31bf3856ad364e35\System.Web.WebPages.Deployment.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.WebPages.Deployment\v4.0_2.0.0.0__31bf3856ad364e35\System.Web.WebPages.Deployment.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Web.PageInspector.Runtime\v4.0_1.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Web.PageInspector.Runtime.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Web.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Web.Infrastructure.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.CSharp\v4.0_4.0.0.0__b03f5f7f11d50a3a\Microsoft.CSharp.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.IdentityModel\v4.0_4.0.0.0__b77a5c561934e089\System.IdentityModel.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Activation\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Activation.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Web\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Web.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Activities\v4.0_4.0.0.0__31bf3856ad364e35\System.Activities.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Activities\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Activities.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.WorkflowServices\v4.0_4.0.0.0__31bf3856ad364e35\System.WorkflowServices.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Extensions\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.Extensions.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Data.DataSetExtensions\v4.0_4.0.0.0__b77a5c561934e089\System.Data.DataSetExtensions.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml.Linq\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.Linq.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ComponentModel.DataAnnotations\v4.0_4.0.0.0__31bf3856ad364e35\System.ComponentModel.DataAnnotations.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.DynamicData\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.DynamicData.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.ApplicationServices\v4.0_4.0.0.0__31bf3856ad364e35\System.Web.ApplicationServices.dll'
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\d2ac696f\807ca1a9_01cccf01\AjaxControlToolkit.dll'
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\0ff769a3\738a1ab9_47e4cf01\myapp.dll', Symbols loaded.
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\48c5da56\c38dd5b4_47e4cf01\WPCSCore.dll', Symbols loaded.
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\1c6f45a6\dd41c2e2_8ed8cf01\wpcsLibrary.dll', Symbols loaded.
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\6a813290\35d3aedf_8ed8cf01\WPWebControls.dll', Symbols loaded.
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Data.Services.Design\v4.0_4.0.0.0__b77a5c561934e089\System.Data.Services.Design.dll'
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\App_global.asax.yz9nltrj.dll', Symbols loaded.
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualBasic\v4.0_10.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualBasic.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Deployment\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Deployment.dll'
A first chance exception of type 'System.Deployment.Application.InvalidDeploymentException' occurred in System.Deployment.dll
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.Wrapper.dll'
WebDev.WebServer40.exe Information: 0 : [Source : ASP.global_asax ] - <No Message>
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Mobile\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Mobile.dll'
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Internals\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Internals.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\SMDiagnostics\v4.0_4.0.0.0__b77a5c561934e089\SMDiagnostics.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xaml.Hosting\v4.0_4.0.0.0__31bf3856ad364e35\System.Xaml.Hosting.dll'
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Entity\v4.0_4.0.0.0__b77a5c561934e089\System.Web.Entity.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Design\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Design.dll'
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'A_7ac34899_0878_4547_ab89_13333f2a2da8'
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\App_Web_2vnmaiqi.dll', Symbols loaded.
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\App_Web_axfwmnjt.dll', Symbols loaded.
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\myapp\8b99fcaa\690ad76d\assembly\dl3\a9a217f9\93d383b9_47e4cf01\myapp.resources.dll'
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
The thread '<No Name>' (0x230c) has exited with code 0 (0x0).
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
Exception was thrown at line 3, column 25599 in http://localhost:51399/myapp/public/jquery-1.7.2.min.js
0x800a139e - JavaScript runtime error: SyntaxError
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
A first chance exception of type 'System.Web.HttpException' occurred in System.Web.dll
The thread '<No Name>' (0x258c) has exited with code 0 (0x0).
WebDev.WebServer40.exe Information: 0 : [Source : ASP.login_aspx ] - <No Message>
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualStudio.Diagnostics.ServiceModelSink\v4.0_4.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Diagnostics.ServiceModelSink.dll'
WebDev.WebServer40.exe Information: 0 : [Source : wpcsLibrary.wpcsUserManager.UserAuthenticate ] - <No Message>
A first chance exception of type 'System.IO.IOException' occurred in mscorlib.dll
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Net.Http\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Net.Http.dll'
WebDev.WebServer40.exe Information: 0 : [Source : ] - <No Message>
A first chance exception of type 'System.Threading.ThreadAbortException' occurred in mscorlib.dll
WebDev.WebServer40.exe Information: 0 : Entering method call dbUtilities
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll'
WebDev.WebServer40.exe Information: 0 : [Source :dbUtilities ] - <No Message>
WebDev.WebServer40.exe Information: 0 : Exiting method call dbUtilities
WebDev.WebServer40.exe Information: 0 : [Source : ASP.accountselector_aspx ] - <No Message>
The thread '<No Name>' (0x24dc) has exited with code 0 (0x0).
WebDev.WebServer40.exe Information: 0 : [Source : ASP.accountselector_aspx ] - <No Message>
A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll
A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'Microsoft.GeneratedCode'
A first chance exception of type 'System.Threading.ThreadAbortException' occurred in mscorlib.dll
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xaml\v4.0_4.0.0.0__b77a5c561934e089\System.Xaml.dll'
WebDev.WebServer40.exe Information: 0 : Entering method call myweb.CentralStation.Apps.AppManager
WebDev.WebServer40.exe Information: 0 : [Source : myweb.CentralStation.Apps.AppManager ] - <No Message>
The thread '<No Name>' (0x2590) has exited with code 0 (0x0).
WebDev.WebServer40.exe Information: 0 : Entering method call myweb.CentralStation.Apps.AppManager
WebDev.WebServer40.exe Information: 0 : [Source : myweb.CentralStation.Apps.AppManager ] - <No Message>
WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'C:\Users\E849324\myweb\Finalview\NCI\Source\WIN-PAK 2.0 R5\SourceCode\WPCSWEB\myapp\bin\DoorApp.app', Symbols loaded.
WebDev.WebServer40.exe Information: 0 : Entering method call myweb.CentralStation.Apps.AppManager
WebDev.WebServer40.exe Information: 0 : [Source : myweb.CentralStation.Apps.AppManager ] - <No Message>
WebDev.WebServer40.exe Information: 0 : Exiting method call myweb.CentralStation.Apps.AppManager
WebDev.WebServer40.exe Information: 0 : Exiting method call myweb.CentralStation.Apps.AppManager
WebDev.WebServer40.exe Information: 0 : Exiting method call myweb.CentralStation.Apps.AppManager
The thread '<No Name>' (0x1f04) has exited with code 0 (0x0).
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : Entering method call wpcsLibrary.wpcsDataManager.dbUtilities
WebDev.WebServer40.exe Information: 0 : Exiting method call wpcsLibrary.wpcsDataManager.dbUtilities
Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.Instance.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.Canvas.set'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
The thread '<No Name>' (0x26c0) has exited with code 0 (0x0).
Step into: Stepping over method without symbols 'string.Concat'
Step into: Stepping over method without symbols 'System.Diagnostics.Trace.TraceInformation'
WebDev.WebServer40.exe Information: 0 : Entering method call myweb.CentralStation.Apps.AppManager
Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.Canvas.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Clear'
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over method without symbols 'System.Collections.Generic.List<System.Web.UI.WebControls.Panel>.List'
Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.InstalledApps.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over method without symbols 'string.Concat'
Step into: Stepping over method without symbols 'System.Diagnostics.Trace.TraceInformation'
WebDev.WebServer40.exe Information: 0 : Entering method call myweb.CentralStation.Apps.AppManager
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.Panel.Panel'
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.WebControl.CssClass.set'
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.Panel.Panel'
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.WebControl.CssClass.set'
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.Panel.Panel'
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.WebControl.CssClass.set'
Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Add'
Step into: Stepping over method without symbols 'myweb.CentralStation.Apps.App.AppInfo.get'
Step into: Stepping over method without symbols 'myweb.CentralStation.Apps.AppAttribute.IconImage.get'
Step into: Stepping over method without symbols 'string.IsNullOrEmpty'
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.Label.Label'
Step into: Stepping over method without symbols 'myweb.CentralStation.Apps.App.AppInfo.get'
Step into: Stepping over method without symbols 'myweb.CentralStation.Apps.AppAttribute.Name.get'
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.Label.Text.set'
Step into: Stepping over method without symbols 'myweb.CentralStation.Apps.App.AppInfo.get'
Step into: Stepping over method without symbols 'myweb.CentralStation.Apps.AppAttribute.Description.get'
Step into: Stepping over method without symbols 'System.Web.UI.WebControls.WebControl.ToolTip.set'
Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Add'
Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Add'
Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Add'
Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.Canvas.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Add'
Step into: Stepping over method without symbols 'string.Concat'
Step into: Stepping over method without symbols 'System.Diagnostics.Trace.TraceInformation'
WebDev.WebServer40.exe Information: 0 : Exiting method call myweb.CentralStation.Apps.AppManager
Step into: Stepping over method without symbols 'System.Collections.Generic.List<System.Web.UI.WebControls.Panel>.Add'
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Collections.Generic.List<System.Web.UI.WebControls.Panel>.ToArray'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].set'
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.Canvas.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
Step into: Stepping over method without symbols 'System.Web.UI.Control.Controls.get'
Step into: Stepping over method without symbols 'System.Web.UI.ControlCollection.Add'
Step into: Stepping over method without symbols 'string.Concat'
Step into: Stepping over method without symbols 'System.Diagnostics.Trace.TraceInformation'
WebDev.WebServer40.exe Information: 0 : Exiting method call myweb.CentralStation.Apps.AppManager
Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.InstalledApps.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over property 'myweb.CentralStation.Apps.AppManager.InstalledApps.get'. To step into properties, go to Tools->Options->Debugging and uncheck 'Step over properties and operators (Managed only)'.
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over method without symbols 'System.Threading.ExecutionContext.Reader.IllogicalCallContext.get'
Step into: Stepping over method without symbols 'System.Runtime.Remoting.Messaging.CallContext.HostContext.get'
Step into: Stepping over method without symbols 'System.Web.HttpContext.Application.get'
Step into: Stepping over method without symbols 'System.Web.HttpApplicationState.this[string].get'
Step into: Stepping over method without symbols 'System.Web.UI.HtmlControls.HtmlControl.Style.get'
Step into: Stepping over method without symbols 'System.AppDomain.Flags.get'
Step into: Stepping over method without symbols 'string.Concat'
Step into: Stepping over method without symbols 'System.Web.UI.CssStyleCollection.Add'
The thread '<No Name>' (0x1b04) has exited with code 0 (0x0).
WebDev.WebServer40.exe Information: 0 : Entering method call ASP.site_master
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : [Source : System.Byte[] ] - <No Message>
WebDev.WebServer40.exe Information: 0 : Entering method call wpcsLibrary.wpcsDataManager.dbUtilities
WebDev.WebServer40.exe Information: 0 : Exiting method call wpcsLibrary.wpcsDataManager.dbUtilities
WebDev.WebServer40.exe Information: 0 : Exiting method call ASP.site_master
A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll
A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll
'WebDev.WebServer40.EXE' (Managed (v4.0.30319)): Loaded 'Microsoft.GeneratedCode'Please post this question to the forums at http://www.asp.net.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces. -
Tacacs authentication fails for one user account for only one switch
Hi,
I am having an scenario, where as Tacacs authentication fails for one user account for only one switch.
The same user account works well for other devices.
The AAA configs are same on every devices in the network.
Heres the show tacacs output from the switch where only one user account fails;
Socket opens: 157
Socket closes: 156
Socket aborts: 303
Socket errors: 1
Socket Timeouts: 2
Failed Connect Attempts: 0
Total Packets Sent: 1703
Total Packets Recv: 1243
Expected Replies: 0
What could be the reason ?
No errors on ACS server; same rights had been given to the user account.
Thanks to advise.
PraseyHi there,
Does the user get authenticated in the ACS logs?
reports and activity----> failed attempts
ro
reports and activity-----> passed authentications
That will help narrow it down.
Brad -
ERROR: Ldap Authentication failed for dap during installation of iAS 6.0 SP3
I am attempting to install ias Enterprise Edition (6.0 SP3) on solaris 2.8 using typical in basesetup. I am trying to install new Directory server as I don't have an existing one.
During the installation I got the following error.
ERROR: Ldap Authentication failed for url ldap://hostname:389/o=NetScape Root user id admin (151: Unknown Error)
Fatal Slapd did not add Directory server information to config Server.
Warning slapd could'nt populate with ldif file Yes error code 151.
ERROR:Failure installing iPlanet Directory Server.
Do you want to continue: ( I entered yes )
Configuring Administration Server Segmentation fault core dumped.
Error: Failure installing Netscape Administration Server.
Do you want to continue:( I responded with yes).
And during the Extraction I got the following
ERROR:mple_bind: Can't connect to the LDAP server - No route to host
ERROR: Unable to connect to LDAP Directory Server
Hostname: hostname
Port: 389
User: cn=Directory Manager
Password: <password-for-cn=Directory Manager
Please make sure this Directory Server is currently running.
You might need to run 'stop-slapd' and then
'start-slapd' in the Directory Server home directory, in order to restart
LDAP. When finished, press ENTER to continue, or S to skip this step:
Start registering Bootstrap EJB...
javax.naming.NameNotFoundException
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled > Code)
at javax.naming.NamingException.<init>(NamingException.java:114)
at javax.naming.NameNotFoundException.<init>(NameNotFoundException.java: 48)
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
"ldaperror" 76 lines, 2944 characters
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at javax.naming.InitialContext.bind(InitialContext.java:371)
at com.netscape.server.deployment.EjbReg.deployToNaming(Unknown Source)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled Code)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled Code)
at com.netscape.server.deployment.EjbReg.run(Compiled Code)
at com.netscape.server.deployment.EjbReg.main(Unknown Source)
Start registering iAS 60 Fortune Application...
Start iPlanet Application Server
Start iPlanet Application Server
Start Web Server iPlanet-WebServer-Enterprise/6.0SP1 B08/20/200100:58
warning: daemon is running as super-user
[LS ls1] http://gedemo1.plateau.com, port 80 ready
to accept requests
startup: server started successfully.
After completion of installation, I tried to start the console. But I got the following error;
"Cant connect ot the admin server. The url is not correct or the server is not running.
Finally,when I started the admintool(iASTT),it shows the iAS1
was registered( marked with a red cross mark) and says "cant login. make sure the user
name & passwdord are correct" when i click on it.
Thanks in advance for any help
MadhaviHi,
Make sure that the directory server is installed first. If it is running
ok, then you can try adding an admin user, please check the following
technote.
http://knowledgebase.iplanet.com/ikb/kb/articles/4106.html
regards
Swami
madhavi korupolu wrote:
I am attempting to install ias Enterprise Edition (6.0 SP3) on
solaris 2.8 using typical in basesetup. I am trying to install new
Directory server as I don't have an existing one.
During the installation I got the following error.
ERROR: Ldap Authentication failed for url
ldap://hostname:389/o=NetScape Root user id admin (151: Unknown
Error)
Fatal Slapd did not add Directory server information to config
Server.
Warning slapd could'nt populate with ldif file Yes error code 151.
ERROR:Failure installing iPlanet Directory Server.
Do you want to continue: ( I entered yes )
Configuring Administration Server Segmentation fault core dumped.
Error: Failure installing Netscape Administration Server.
Do you want to continue:( I responded with yes).
And during the Extraction I got the following
ERROR:mple_bind: Can't connect to the LDAP server - No route to host
ERROR: Unable to connect to LDAP Directory Server
Hostname: hostname
Port: 389
User: cn=Directory Manager
Password: <password-for-cn=Directory Manager
Please make sure this Directory Server is currently running.
You might need to run 'stop-slapd' and then
'start-slapd' in the Directory Server home directory, in order to
restart
LDAP. When finished, press ENTER to continue, or S to skip this
step:
Start registering Bootstrap EJB...
javax.naming.NameNotFoundException
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled > Code)
at javax.naming.NamingException.<init>(NamingException.java:114)
at
javax.naming.NameNotFoundException.<init>(NameNotFoundException.java:
48)
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
"ldaperror" 76 lines, 2944 characters
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at javax.naming.InitialContext.bind(InitialContext.java:371)
at com.netscape.server.deployment.EjbReg.deployToNaming(Unknown
Source)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled
Code)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled
Code)
at com.netscape.server.deployment.EjbReg.run(Compiled Code)
at com.netscape.server.deployment.EjbReg.main(Unknown Source)
Start registering iAS 60 Fortune Application...
Start iPlanet Application Server
Start iPlanet Application Server
Start Web Server iPlanet-WebServer-Enterprise/6.0SP1 B08/20/200100:58
warning: daemon is running as super-user
[LS ls1] http://gedemo1.plateau.com, port 80 ready
to accept requests
startup: server started successfully.
After completion of installation, I tried to start the console. But I
got the following error;
"Cant connect ot the admin server. The url is not correct or the
server is not running.
Finally,when I started the admintool(iASTT),it shows the iAS1
was registered( marked with a red cross mark) and says "cant login.
make sure the user
name & passwdord are correct" when i click on it.
Thanks in advance for any help
Madhavi
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base! -
I have devices loaded but new devices keep getting this error "Authentication failed on device 3 times. Failed to detect SSH version running on the device. PRIMARY-STARTUP config Fetch Operation failed for TFTP" - which trying to get configurations. I am using LMS 3.0.1
I tried to TELNET on devices via Putty port 22 no good. Please help?
Name Version License Status Size CiscoWorks Common Services 3.1.1 Licensed Not applicable Campus Manager 5.0.3 Purchased 1500 CiscoView 6.1.7 Licensed Not applicable CiscoWorks Assistant 1.0.1 Licensed Not applicable Device Fault Manager 3.0.3 Purchased 1500 Internetwork Performance Monitor 4.0.1 Purchased 1500 Integration Utility 1.7.1 Licensed Not applicable LMS Portal 1.0.1 Licensed Not applicable Resource Manager Essentials 4.1.1 Purchased 1500Showing 1-1 of 1 records
Go to page:
of 1 pages
Device Name
SysObjectID
Model
Device Status
Inventory Status
Inventory Last Updated Time
Config Status
Config Last Updated Time
1.
R2020012_01
.1.3.6.1.4.1.9.1.576
Cisco 2811 Integrated Services Router
Normal
Success
Jan 13 2011 10:43:49 EST
Failed
Jan 13 2011 10:37:24 EST
Rows per page:
20 50 100 500
Go to page:
of 1 pages -
NoMachine(freenx) Authentication failed for user (MYUSERNAME)
Hi all,
I have quite a few experience with freenx on other linux distributions, but this is my first time setting up freenx on archlinux. After following the instructions in the wiki, authentication keeps failing no matter what I do.
Stuff I've done from the wiki:
1. install freenx
2. add RSAAuthentication yes AllowUsers someuser nx to sshd_config
3. add md5sum to node.conf
4. pacman -S xdialog xterm
5. run "/usr/bin/nxsetup --install --setup-nomachine-key"
6. modify /etc/nxserver/node.conf so that "USER_X_STARTUP_SCRIPT=.xinitrc"
7. pick the right configurations when connecting to my server
I have "exec startxfce4" in .xinitrc.
It always goes up to "Waiting for authentication" and then "Authentication failed for user (MYUSERNAME)" pops up. I think it should not be a XFCE issue since authentication itself didn't even pass. I assume if it is a X window problem, what I would get is something like a blank screen.
I'm using public key, so I didn't really copy anything from the server to my client.
I couldn't think of a second reason why this wouldn't work. Is there any thing obvious that I missed? (If so, please move this thread to the newbie corner. lol)
Any thoughts would be highly appreciated.
Thanks
AweatherHi,
I did update the password in the properties file but still I get the error
BUILD FAILED
C:\product\10.1.3.1\OracleAS_1\bpel\samples\utils\CreditRatingService\build.xml:
79: Authentication failed for user "oc4jadmin" on host
I am able to deploy from JDEV. and could configure as per documentation
Thanks in advance,
Anand
I had to update the <OH>/bpel/utilities/ant-orabpel.properties file for the password and now I can deploy successfully...information was there in the readme file...
Anand
Message was edited by:
AnandP -
Essbase Error 1051440 - Authentication fails for user admin
We are facing a very unique problem...
The application is up & running.. even I can login into the application, can perform member addition, editing & mamage database from planning.... but I get this error while retreiving from excel addin or running scripts.
What I analysed is that this problem is Actually coming when a particular set of members are called anywhere either in scripts or during retreival thru Addin.
Recently we had added one dimension in one of the database of our application. After that that this problem started.
There were fewer Xref functions used to pull data from other cubes.... The problem is cominng with only those set of members where this Xref function has been used.
Even I had changed the formulas & incorporated member of new dimension in the formulas to point to target members....
Can you guys ever had faced such kind of issue....
Please help in resolving....
Complete Error is: msg fromremote site[date n time] Local////Error(1051440) Essbase user[admin] Authentication fails against shared services serverwith Error[30:1005:Authentication failed for user admin. Enter valid credentials.]]Hi,
are you sure that user "admin" has all necessary rights to run your scripts? I have to ask because we sometimes had problems with our admin user... There is an "native essbase server admin" and the admin user in shared services.
We dont had any idea how this could happen but sometimes our admin user changed to the mentioned "native essbase server admin" - you can see it if you are connected as "admin (internal)".
If you are logged in as "admin (internal)" you have to "externalize" this user.
Hope this helps and my bad english is not so much confusing... :-)
Kind regards
André -
Multiple Passed Authentication and Failed Attempts for the users
Hi,
I encountered the following error logs in the ACS CSAuth folder. I did logging to full to find out more about the process involved in the PEAP Authentications.
=========================================
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: Service-Type=2
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: Framed-MTU=1300
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: NAS-Port-Type=19
AUTH 09/13/2007 09:41:33 E 0143 8672 [PDE]: PdeAttributeSet::addAttribute: invalid attr type=200
AUTH 09/13/2007 09:41:33 E 0143 8672 [PDE]: PdeAttributeSet::addAttribute: invalid attr type=200
AUTH 09/13/2007 09:41:33 E 0143 8672 [PDE]: PdeAttributeSet::addAttribute: invalid attr type=201
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: EAP-Message=(binary value)
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: Message-Authenticator=(binary value)
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: PDE-NAS-Vendor-14=13
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PdeAttributeSet::addAttribute: PDE-Service-ID-0=0
AUTH 09/13/2007 09:41:33 I 0143 8672 [PDE]: PolicyMgr::SelectService: context id=14824; no profile was matched - using
default (0)
AUTH 09/13/2007 09:41:33 I 5081 8672 Done RQ1152, client 2, status 0
AUTH 09/13/2007 09:41:33 I 5094 9668 Worker 5 processing message 1077.
AUTH 09/13/2007 09:41:33 I 5081 9668 Start RQ1026, client 50 (127.0.0.1)
AUTH 09/13/2007 09:41:33 I 1554 9668 pvAuthenticateUser: authenticate 'STAFPSAS\shimah' against Windows Database
AUTH 09/13/2007 09:41:33 I 5081 9668 Done RQ1026, client 50, status -2046
AUTH 09/13/2007 09:41:33 I 5094 9668 Worker 5 processing message 1078.
AUTH 09/13/2007 09:41:33 I 5081 9668 Start RQ1027, client 50 (127.0.0.1)
AUTH 09/13/2007 09:41:33 I 0897 9668 AuthenProcessResponse: process response for 'STAFPSAS\shimah'
AUTH 09/13/2007 09:41:33 I 5081 9668 Done RQ1027, client 50, status -2046
AUTH 09/13/2007 09:41:33 I 5094 9668 Worker 5 processing message 1079.
AUTH 09/13/2007 09:41:33 I 5081 9668 Start RQ1027, client 50 (127.0.0.1)
AUTH 09/13/2007 09:41:33 I 0897 9668 AuthenProcessResponse: process response for 'STAFPSAS\shimah'
AUTH 09/13/2007 09:41:33 I 5081 9668 Done RQ1027, client 50, status -2046
AUTH 09/13/2007 09:41:33 I 5094 9668 Worker 5 processing message 1080.
AUTH 09/13/2007 09:41:33 I 5081 9668 Start RQ1027, client 50 (127.0.0.1)
AUTH 09/13/2007 09:41:33 I 0897 9668 AuthenProcessResponse: process response for 'STAFPSAS\shimah'
AUTH 09/13/2007 09:41:33 I 5081 9668 Done RQ1027, client 50, status -2121
AUTH 09/13/2007 09:41:34 I 5094 9668 Worker 5 processing message 1081.
AUTH 09/13/2007 09:41:34 I 5081 9668 Start RQ1027, client 50 (127.0.0.1)
AUTH 09/13/2007 09:41:34 I 0897 9668 AuthenProcessResponse: process response for 'STAFPSAS\salasiah'
AUTH 09/13/2007 09:41:34 E 0361 9668 EAP: PEAP: getEapMsgFromPeapTunnelFrag: error decrypting non fragmented data.
AUTH 09/13/2007 09:41:34 E 0361 9668 EAP: PEAP: getEapMsgFromPeapTunnelFrag: SSL send alert fatal:unexpected_message
AUTH 09/13/2007 09:41:34 I 5081 9668 Done RQ1027, client 50, status -2120
AUTH 09/13/2007 09:41:34 I 5094 8672 Worker 1 processing message 842.
AUTH 09/13/2007 09:41:34 I 5081 8672 Start RQ1040, client 2 (127.0.0.1)
AUTH 09/13/2007 09:41:34 I 5081 8672 Done RQ1040, client 2, status 0
AUTH 09/13/2007 09:41:34 I 5094 8672 Worker 1 processing message 843.
AUTH 09/13/2007 09:41:34 I 5081 8672 Start RQ1152, client 2 (127.0.0.1)
=========================================
Can anyone suggest what could be the cause of the error?
I suspected something to do with the certificate. Please advise.
Thanks.
Delon
Thanks.If ACS and Supplicant or only ACS is enabled Fast Reconnect option, authentication will fail.If you are using XP SP2, it'll be fixed with applying KB885453 patch or simply just disable FAST Reconnect option at ACS. Also make sure user account trying to authenticate has a valid entry in active directory.
-
Authentication failed for realm level_15
hi,
I'm trying to configure HTTP server to authenticate users with AAA platform. I get the following error while trying to connect with Cisco Configuration Pro:
TNRTAGCS01002#
Apr 23 15:29:42.129 CET: HTTP AAA Login-Authentication List name: default
Apr 23 15:29:42.165 CET: HTTP: Authentication failed for realm level_15 or view_access
Apr 23 15:29:42.165 CET: HTTP: Authentication failed for level 15
Apr 23 15:29:44.193 CET: HTTP AAA Login-Authentication List name: default
Apr 23 15:29:44.225 CET: HTTP: Authentication failed for realm level_15 or view_access
Apr 23 15:29:44.225 CET: HTTP: Authentication failed for level 15
Here's the AAA config:
aaa new-model
aaa group server tacacs+ TACACS_group
server {A}
server {B}
tacacs-server host A key A1
tacacs-server host B key B1
ip tacacs source-interface GigabitEthernet0/0.1900
aaa authentication login default group TACACS_group local
aaa authentication enable default none
aaa authorization config-commands
aaa authorization commands 1 default group TACACS_group if-authenticated
aaa authorization commands 15 default group TACACS_group if-authenticated
aaa accounting exec default
action-type start-stop
group TACACS_groupHi,
Yes, local authentication does work.
I added below the HTTP configuration:
ip http server
ip http authentication aaa login-authentication default
no ip http secure-server
I thought that HTTP would use the default method list for authentication. Is that possible or should I define a seperate AAA method list?
By the way, I always rate helpful posts -
Portmap translation creation failed for udp src inside dst inside
Hi!
I have a problem with allowing traffic to UC500 subnets on ASA 5505 inside interface.
My asa is a main router with addres 192.168.1.1
UC500 voip box is connected to ASA's inside interface through UC500 WAN port with UC500 with 192.168.1.2 address.
Firewall and NAT on UC500 is disable
UC500 sip traffic works fine. voipbox creates its subnets for data and voip - 192.168.10.0 and 10.1.1.0. another important address is 10.1.10.1 which is UC500 CUE.
My problem is that from within ASA local network (192.168.1.0) i cannot reach UC500 subnets, neither can I reach ASA's local network from the UC subnets.
the log says
3
Sep 07 2013
00:21:49
DC
53
PBXCUE
32901
portmap translation creation failed for udp src inside:DC/53 dst inside:PBXCUE/32901
I tried exempting uc500 subnets on ASA but that didn;t work.
Funny thing is that I CAN reach the UC500 subnets when connecting with VPN to ASA...
Please help! I am not familiar with CLI.
I configured static route to 10.1.10.0 and since then I was able to ping 10.1.10.1 thorugh ASA;s VPN.
I would be grateful for ideas.
Lukasz
global (inside) 1 interface
global (outside) 101 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 101 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface https IIS https netmask 255.255.255.255 dns tcp 200 200 udp 200
static (inside,outside) tcp interface www IIS www netmask 255.255.255.255 dns tcp 200 200 udp 200
static (inside,outside) tcp interface smtp IIS smtp netmask 255.255.255.255 dns
static (inside,outside) tcp interface pop3 IIS pop3 netmask 255.255.255.255 dns
static (inside,outside) udp interface domain RenBetPBX domain netmask 255.255.255.255 dns
static (inside,outside) udp interface 5061 RenBetPBX 5061 netmask 255.255.255.255 dns
static (inside,outside) udp interface sip RenBetPBX sip netmask 255.255.255.255 dns
static (inside,outside) tcp interface 13000 SQL 13000 netmask 255.255.255.255 dns
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 x.x.x.x
route inside PBXCUE-network 255.255.255.0 RenBetPBX 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicyHello Julio!
Thank you for your advice.
I have managed to solve my main problem by reconfiguring my switches vlans - enabling trunk port configs for required ports and allowing them access to both vlans.
Now I can see everything from all of my inside networks.
I continue my ASA adventures - I have managed to configure L2TP client access for my windows users, RADIUS authentication for domain users and yesterday night I have managed to configure site to site VPN with my RV120W router.
I am only an enthusiast but my recent successes have given me apetite for more...
I keep reading forums and trying to solve most of my problems myself but I have faced another one now and thought that maybe you could give me another tip on where to look for the issue:
I still have one problem with my L2TP VPN config - I have configured split tunnel on the group policy to tunnel only 192.168.1.0 network requests.
access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
My network at home is 192.168.2.0 but it still tunnels everything (when I check my ip after connecting to VPN my home laptop still identifies with ASA gateway(!) address .
access-list outside_access_in extended permit icmp any interface outside object-group DM_INLINE_ICMP_1
access-list outside_access_in extended permit tcp any interface outside object-group DM_INLINE_TCP_1
access-list outside_access_in extended permit tcp any interface outside eq smtp
access-list outside_access_in extended permit tcp any interface outside eq 8080
access-list outside_access_in extended permit tcp any interface outside eq 23456
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 object-group DM_INLINE_NETWORK_1 any
access-list outside_access_in extended permit tcp any interface outside eq 13000
access-list outside_access_in extended permit tcp any interface outside range 8001 8016
access-list outside_access_in extended permit tcp x.x.x.x 255.255.255.0 interface outside eq ssh
access-list inside_nat0_outbound extended permit ip any 192.168.1.240 255.255.255.240
access-list inside_nat0_outbound extended permit ip any PBXVOIP-network 255.255.255.0
access-list inside_nat0_outbound extended permit ip any PBXCUE-network 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 igolomska-network 255.255.255.0
access-list inside_access_in extended permit udp object-group DM_INLINE_NETWORK_2 any object-group DM_INLINE_UDP_1
access-list inside_access_in extended permit ip host IIS any
access-list inside_access_in extended permit ip any any
access-list inside_access_in extended permit ip host RBSTORE_NAS any
access-list inside_access_in extended deny udp any any object-group DM_INLINE_UDP_2
access-list inside_access_in extended permit tcp any any eq 5432
access-list inside_access_in extended permit tcp any host PBXCUE eq www
access-list inside_access_in extended permit tcp host PBXCUE any eq www
access-list inside_access_in extended permit tcp host RBCAMSTORE_NAS host EXCH-MBX eq smtp
access-list inside_access_in extended permit tcp host RBSTORE_NAS host EXCH-MBX eq smtp
access-list inside_access_in extended permit tcp host RENBETUPS host EXCH-MBX eq smtp
access-list inside_access_in extended permit tcp host RenBetPBX host EXCH-MBX eq smtp
access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
access-list outside_1_cryptomap extended permit ip 192.168.1.0 255.255.255.0 igolomska-network 255.255.255.0
route print shows:
and 192.168.1.240 is my VPN IP - its metric has higher priority than the local gateway.
How do I change it?
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.2.1 192.168.2.126 4250
0.0.0.0 0.0.0.0 On-link 192.168.1.240 21
80.51.24.22 255.255.255.255 192.168.2.1 192.168.2.126 4251
127.0.0.0 255.0.0.0 On-link 127.0.0.1 4531
127.0.0.1 255.255.255.255 On-link 127.0.0.1 4531
127.255.255.255 255.255.255.255 On-link 127.0.0.1 4531
169.254.0.0 255.255.0.0 On-link 192.168.2.126 4506
169.254.104.126 255.255.255.255 On-link 192.168.2.126 4506
169.254.255.255 255.255.255.255 On-link 192.168.2.126 4506
192.168.1.240 255.255.255.255 On-link 192.168.1.240 276
192.168.2.0 255.255.255.0 On-link 192.168.2.126 4506
192.168.2.126 255.255.255.255 On-link 192.168.2.126 4506
192.168.2.255 255.255.255.255 On-link 192.168.2.126 4506
224.0.0.0 240.0.0.0 On-link 127.0.0.1 4531
224.0.0.0 240.0.0.0 On-link 192.168.2.126 4506
224.0.0.0 240.0.0.0 On-link 192.168.1.240 21
255.255.255.255 255.255.255.255 On-link 127.0.0.1 4531
255.255.255.255 255.255.255.255 On-link 192.168.2.126 4506
255.255.255.255 255.255.255.255 On-link 192.168.1.240 276
===========================================================================
I am starting to feel like I am using a bit too much of your friendliness ...
Best Regards and have a great day!
Lukasz -
Post install checks failed for DBC file - Oracle App11.5.10.2 Linux 5.3
Hi everybody,
I tried Installing Oracle E-Business Suite 11.5.10.2 on Red Hat Enterprise Linux Server release 5.3
The Post install checks failed for DBC file, HTTP, JSP and PHP. Apparently the DBC hadn’t been created. I had verified the log file, while executing adgendbc.sh, it throwing below error.
Generating /jith/d01/oracle/appl/visappl/fnd/11.5.0/secure/prithvi.bangalore.bedford.local_vis.dbc
DBC generation failed with exit code 127
Generating /jith/d01/oracle/appl/visappl/fnd/11.5.0/secure/prithvi_vis.dbc
DBC generation failed with exit code 127
Updating Server Security Authentication
Updating Server Security Authentication failed with exit code 127
adgendbc.sh exiting with status 127
ERRORCODE = 127 ERRORCODE_END
.end std out.
touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
mkdir: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sed: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
.end err out.
Thanks in advance.
sreejithWelcome to the forums !
Pl post EBS related question in the EBS forums at http://forums.oracle.com/forums/category.jspa?categoryID=3
HTH
Srini -
I want to grant permissions to all domain users to view reports on our Report Server. Domain users are able to access our Report Server URL and folder, but when they click on a report item they get an error message:
"Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'"
I'm using windows authentication and configured the local service account in SSReportS Config Manager as the credentials to connect to the Report Server DB.
Can someone please help how I should properly do this step by step to give all domain users permissions to view a report in SSRS?
Thanks much! - Rookie DBAHi IWAR,
The error message "Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'" means the user 'USER LOGON' does not have permissions to access the "ReportServer" database.
To fix this issue, please verify that the user has a valid database user login. For more details, please refer to the following steps.
In SQL Server Management Studio, open Object Explorer and expand the Databases folder.
Expand the database in which to create the new database user.
Right-click the Security folder, point to New, and then click User.
On the General page, enter a name for the new user in the User name box.
In the Login name box, enter the name of a SQL Server login to map to the database user.
Click OK.
Reference:
http://technet.microsoft.com/en-us/library/ms156468(v=sql.105).aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Deployment issue - Login failed for user 'NT AUTHORITY\NETWORK SERVICE'
I am attempting to deploy a site from my development PC to my server. I have no issues running the site on the server using VS2010 Express Web in debug. All page queries are working within the debugger. The connection strings are identical between the PC
and Server, except the host name.
connectionString
="Data
Source=SOCIALSERVER;Initial Catalog=Intake_be;Integrated Security=True"
However, when using the site normally via IIS, the pages containing data access are failing with a permissions problem. The non-data access pages render normally.
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'
Looking at the SQL2005 instance via SQL Management Studio, I see security folder with Logins under the Server. NTA\NS is listed as a user login. But, I also see similar folders under each
of 3 databases. NTA\NS is not listed as a login specific to my target dB.
My site is for internal (intranet) use only. There is no internet access into my IIS. This is my first deployment into production. I think I only need Windows Authentication but I lack the experience to make a good decision. My goal is to allow domain users
to access pages that produce read only data. But, I also need controlled access to pages that can modify data. I used the native winform template for ASP.NET 4, which includes some roles based security.
How do I grant permissions for internal users on the pages that access SQL data? How does that security model work with the native roles based security? i.e.
add
name="AspNetSqlMembershipProvider"type="System.Web.Security.SqlMembershipProvider"connectionStringName="ApplicationServices"...
etc.
Thanks for your time and patience on this Deployment 101 type issue.
Kurthi,
You receive either of these error messages specifically when you use integrated security.
To resolve you can use one of below.
Method 1: Programmatically change the security context of the ASP.NET worker process to a user who has the correct SQL Server permissions.
Method 2: Change the default configuration of ASP.NET so that the ASP.NET worker process starts and runs under the context of a user who has the correct permissions in SQL Server.
Method 3: Grant the correct permissions in SQL Server so that the ASPNET account (or NetworkService account, for an application that runs on IIS 6.0) has the appropriate access to the required resources.(Go to the Computer Management >> Local User and
Groups >> Groups >> Right Click and go to properties on IIS_IUSRS >> Add appropriate user.
Thanx, Mark as answered if you are ok .. -
Unhandled Exception Error - Login Failed for User
Hello,
I am receiving an error when I run my application stating “Unhandled exception has occurred. If you click continue, the application will ignore the error………..Login failed for MyUser.
When I click the Continue button the application runs and seems to work properly. This application used to run without receiving the error and I did not make any changes. I have another application that is using basically the exact same code and does not
receive the error. The only difference is the application is querying a different DB but using the exact same connection string. The error only occurs when I run the exe file created from the build. When I run (debug) the application from within the VS 2013
IDE I do not receive the error.
Here are the details to the error message:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Data.OleDb.OleDbException (0x80040E4D): Login failed for user 'jobrunner'.
at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionInternal.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.OleDb.OleDbConnection.Open()
at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataTable dataTable)
at LoanOrig_FDIC_Codes.DataSet1TableAdapters.I_LoansTableAdapter.Fill(I_LoansDataTable dataTable) in u:\Visual Studio Projects\LoanOrig_FDIC_Codes\LoanOrig_FDIC_Codes\LoanOrig_FDIC_Codes\DataSet1.Designer.cs:line 1668
at LoanOrig_FDIC_Codes.Form1.Form1_Load_1(Object sender, EventArgs e) in u:\Visual Studio Projects\LoanOrig_FDIC_Codes\LoanOrig_FDIC_Codes\LoanOrig_FDIC_Codes\Form1.cs:line 152
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
LoanOrig_FDIC_Codes
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///U:/Visual%20Studio%20Projects/LoanOrig_FDIC_Codes/LoanOrig_FDIC_Codes/LoanOrig_FDIC_Codes/bin/Debug/LoanOrig_FDIC_Codes.exe
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34238 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
System.Configuration
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
System.Data
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
System.Data.DataSetExtensions
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Data.DataSetExtensions/v4.0_4.0.0.0__b77a5c561934e089/System.Data.DataSetExtensions.dll
System.Numerics
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll
System.Transactions
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.34209 built by: FX452RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dll
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
I'm not sure what the JIT debugger is but to my knowledge my other apps are not using that. The production username and password are correct in the connection string so I'm not clear why I am receiving this error especially since I'm not receiving the
error on my other application. I have also attached the code just in case it is needed. Any assistance will be greatly appreciated. Thank you.
Dave
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Data.SqlClient;
using ClosedXML.Excel;
using DocumentFormat.OpenXml;
using System.IO;
namespace LoanOrig_FDIC_Codes
public partial class Form1 : Form
SqlCommand sqlCmd;
SqlDataAdapter sqlDA;
DataSet sqlDS;
DataTable sqlDT;
SqlCommand sqlCmdCnt;
public Form1()
InitializeComponent();
//BEGIN BUTTON LOAD CLICK EVENT
private void btnLoad_Click(object sender, EventArgs e)
string sqlCon = "Data Source=FS-12345; Initial Catalog=ExtractGenerator; User ID=MyUser; Password=MyPW";
//Set the 2 dateTimePickers to today's date
DateTime @endDate = End_dateTimePicker.Value.Date;
DateTime @startDate = Start_dateTimePicker.Value.Date;
//Validate the values of the 2 dateTimePickers
if (endDate < startDate)
MessageBox.Show("End Date must be greater than or equal to the Start Date OR Start Date must be less than or equal to the End Date ", "Incorrect Date Selection",MessageBoxButtons.OK,MessageBoxIcon.Error);
//Reset both dateTimePickers to todays date
Start_dateTimePicker.Value = DateTime.Today;
End_dateTimePicker.Value = DateTime.Today;
return;
//End of date validation
string sqlData = @"SELECT AcctNbr,
CurrAcctStatCD,
Org,
MJAcctTypCD,
MIAcctTypCD,
NoteOriginalBalance,
ContractDate,
FDICCATCD,
FDICCATDESC,
PropType,
PropTypeDesc
FROM I_Loans
WHERE CAST(ContractDate AS datetime) BETWEEN @startdate AND @enddate ORDER BY ContractDate";
SqlConnection connection = new SqlConnection(sqlCon);
SqlCommand sqlCmd = new SqlCommand(sqlData, connection);
sqlCmd.Parameters.AddWithValue("@startDate", startDate);
sqlCmd.Parameters.AddWithValue("@endDate", endDate);
sqlDS = new DataSet();
sqlDA = new SqlDataAdapter(sqlCmd); //SqlAdapter acts as a bridge between the DataSet and SQL Server for retrieving the data
connection.Open();
sqlDA.SelectCommand = sqlCmd; //SqlAdapter uses the SelectCommand property to get the SQL statement used to retrieve the records from the table
sqlDA.Fill(sqlDS, "I_Loans"); //SqlAdapter uses the "Fill" method so that the DataSet will match the data in the SQL table
sqlDT = sqlDS.Tables["I_Loans"];
//Code section to get record count
sqlCmdCnt = connection.CreateCommand();
sqlCmdCnt.CommandText = "SELECT COUNT(AcctNbr) AS myCnt FROM I_Loans WHERE ContractDate BETWEEN @startDate AND @endDate";
sqlCmdCnt.Parameters.AddWithValue("@startDate", startDate);
sqlCmdCnt.Parameters.AddWithValue("@endDate", endDate);
int recCnt = (int)sqlCmdCnt.ExecuteScalar();
txtRecCnt.Text = recCnt.ToString();
btnExport.Enabled = true;
//End of code section for record count
connection.Close();
dataGridView1.DataSource = sqlDS.Tables["I_Loans"];
dataGridView1.ReadOnly = true;
//Reset both dateTimePickers to todays date
Start_dateTimePicker.Value = DateTime.Today;
End_dateTimePicker.Value = DateTime.Today;
//END BUTTON LOAD CLICK EVENT
//BEGIN BUTTON EXPORT CLICK EVENT
private void btnExport_Click(object sender, EventArgs e)
SaveFileDialog saveFD = new SaveFileDialog();
{ //ClosedXML code to export datagrid result set to Excel
string dirInfo = Path.GetPathRoot(@"\\FS-03250\users\dyoung\LoanOrig_FDIC_Codes");
if (Directory.Exists(dirInfo))
var wb = new XLWorkbook();
var ws = wb.Worksheets.Add(sqlDT);
ws.Tables.First().ShowAutoFilter = false;
//SaveFileDialog saveFD = new SaveFileDialog(); //I moved this variable to the top of the btnExport code block so that the variable will be available thru the entire scope of that code block
saveFD.Title = "Save As";
saveFD.Filter = "Excel File (*.xlsx)| *.xlsx";
saveFD.FileName = "LoanOrig_FDIC_Codes_" + DateTime.Now.ToString("yyyy-MM-dd");
if (saveFD.ShowDialog() == System.Windows.Forms.DialogResult.OK)
Stream stream = saveFD.OpenFile();
wb.SaveAs(stream);
stream.Close();
else if (saveFD.ShowDialog() == System.Windows.Forms.DialogResult.Cancel)
MessageBox.Show("Save file operation has been canceled", "Save As Canceled", MessageBoxButtons.OK, MessageBoxIcon.Stop);
return;
//End of ClosedXML code
MessageBox.Show("File has been exported to " + saveFD.FileName, "File Exported", MessageBoxButtons.OK, MessageBoxIcon.Information);
//MessageBox.Show("File has been exported to U:\\LoanOrig_FDIC_Codes", "File Exported", MessageBoxButtons.OK, MessageBoxIcon.Information);
else
MessageBox.Show("Drive " + saveFD.FileName + " " + "not found, not accessible, or you may have invalid permissions");
//MessageBox.Show("Drive " + "U:\\Visual Studio Projects\\LoanOrig_FDIC_Codes" + " " + "not found, not accessible, or you may have invalid permissions");
return;
//END THE SAVE AS PROCESS
//END BUTTON EXPORT CLICK EVENT
private void Form1_Load(object sender, EventArgs e)
//Set dates to be today's date when the form is openend
Start_dateTimePicker.Value = DateTime.Today;
End_dateTimePicker.Value = DateTime.Today;
private void Form1_Load_1(object sender, EventArgs e)
// TODO: This line of code loads data into the 'dataSet1.I_Loans' table. You can move, or remove it, as needed.
this.i_LoansTableAdapter.Fill(this.dataSet1.I_Loans);
private void iLoansBindingSource_CurrentChanged(object sender, EventArgs e)
private void btnExit_Click(object sender, EventArgs e)
this.Close();
David YoungIn SQL you have a login which allows access to the server but you must also have permissions to access each database that you will use (including Master). So I would verify that your user also has the necessary permissions on the database itself and
not just the SQL instance. The error you're getting is from SQL saying that the user doesn't have permissions. If it works for 1 DB but not the other on the same SQL instance then it is likely a missing permission on the DB itself.
I should note that you have a hard coded conn string in your code but the error is for a different user. I'm assuming that you simply posted it there for convenience and that you changed the values to obscure the data. If you are actually getting
the info from your config file then verify the connection string is correct. Also be sure to not use Integrated Security since it appears that you are using SQL authentication.
Maybe you are looking for
-
Running multiple DAQ tasks at the same time
I am trying to setup a program that would allow me to run different analog voltage waveforms on different channels. The rate at which samples hit each channel can be the same for all 32, but I want each to be sourced by an individual file I/O source.
-
Oracle 10g EE Export Results in ORA-01001: invalid cursor Error
Hi, I'm quite new to Oracle 10g and OCS10g. We have a crippled/corrupt SYSAUX tablespace (data file 3) which cannot be recovered using recover command anymore. So metalink support instructed us to do a export of the metadata of the working tablespace
-
I have installed archlinux 2010.05 on VMware. I will be using this system as a FTP server. I don't know how to connect to this system from windows so that I can transfer the packages and install them. SCP does'nt work might be because it is not insta
-
Invoking BPEL process: how to decide it's two way or one way operation
Hi, I'm using IDeliveryService to invoke BPEL process. Is there API available that allows me to check whether the operation is two way so I call IDeliveryService.request() or is one way so I call IDeliveryService.post()? Thanks, Qian
-
[svn:fx-trunk] 8209: Missed a rename from Monday's flex4- spark rename work.
Revision: 8209 Author: [email protected] Date: 2009-06-24 16:09:28 -0700 (Wed, 24 Jun 2009) Log Message: Missed a rename from Monday's flex4-> spark rename work. One of the ant targets in build_framework referenced Flex4Classes which has since