Passive Mode

Most sites require passive mode. I does iweb handle this requirement?
jmf

I know from all the other connection programs I have that I need to choose passive mode to make a connection to my site, and I'm thinking that this is why I web will not connect.
Perhaps someone will come along who knows for sure that his account needs passive and iWeb does work. There's someone in this thread who thinks passive may be the problem:
http://forums.macrumors.com/showthread.php?t=641943

Similar Messages

Read file from FTP server (passive mode)

HI,
I want to read a file from a ftp server. I can do it by OpenStream() and read the file contents as a stream. But the ftp account is set as "PASSIVE Mode", so how to set it to passive mode and access the file ? Any thoughts?
Thanks,
thb.

Hi,
Thanks for your speedy response. How to set the PASV parameter, with the InputStream reader. Currently I am reading a file that is active thru. flg. steps.
InputStream is = new URL("url").openStream();
BufferedReader in = new BufferedReader(new InputStreamReader(is));
Then, I am writing the stream contents to a file. So how to set up the PASV parameter?
Thanks.

Oracle 10g Database Installation In Active-Passive Mode.

Good Afternoon !!!!
We are installing Oracle 10g in Active-Passive Mode on HP UX-11.3 , with ASM. Can someone help me with step wise installation procedure for the same.
Many Thank's
Rajeev.

Check on the release notes for your platform
This is for x86-64 Linux.. read it all, then you'll find the "6 Documentation Corrections and Additions" section you'll find the RPMs that you need
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15666/toc.htm
then go to the official doc installation of 10gR2 on x86-64 Linux
http://download.oracle.com/docs/cd/B19306_01/install.102/b15667/toc.htm
Yum is a package management tool. This is what you'll be using to install the RPMs. But first you'll have to setup the Yum repository, usually what I do is stage the DVD media on the server then make it as a repository. If ever there's a specific (higher) version that I need then I just pull it on the RedHat Network.
There are a lot of HOWTOs about Yum. You may read on this link http://docs.fedoraproject.org/yum/en/
- Karl Arao
http://karlarao.wordpress.com/

Proftpd and filezilla not usable on Solaris 11 in passive mode

Having problems with proftpd on Solaris 11 and wondering if anyone else has noticed this?
The clients are Windows & filezilla!
I have not changed any settings and just started svc:/network/ftp:default and I have noticed I am getting a lot of timeouts on file transfers. Getting this a lot on NFS (ZFS with ACLs) file systems and even on local file systems (less often, but fails when transfer many files).
What makes it worst is that the file starts to be written to disk but with size 0 and after the timeout filezilla starts again and a popup appears saying file exists??
I am getting over it by switching off "passive mode" in /etc/proftpd.conf and then it works fine!
# Disable Extended Passive mode
<Limit EPSV PASV>
DenyAll
</Limit>
And before any ones asks no firewalls on network or client!
Any pointers?
Andrew

Strange think is that I just tried a Solaris 11.1 system and it works with out any problem.
So something has been fixed in Solaris 11.1.
It is the same version of proftpd so I guess something has changed else where to help with my problem.
Anyway, will do some more testing before upgrading my FTP server, but it looks like good news.
Andrew

WLC RADIUS Server Failover - Passive mode timer

In 7.2 WLC code, it appears it is now possible to specify which RADIUS servers are used as the preferred server for authentication (
Security > AAA > RADIUS > Fallback to open the RADIUS > Fallback Parameters ).
There are 3 mode for this: off, passive & active.
In the passive mode, the operation is described in the config guide as :
Passive
—Causes the controller to revert to a server with a lower priority from the available backup servers without using extraneous probe messages. The controller ignores all inactive servers for a time period and retries later when a RADIUS message needs to be sent.
Does anyone know how long this 'time period' is? If it is only a few seconds, then it could be that user authentications are being used to test against a failed RADIUS server frequently & will experience annoying time-out delays, causing support calls etc.
Anyone know what it is, or if its configurable? I don't see anything in the docs...
Nigel.

Here you go.
RADIUS Server Fallback Feature on WLC.
http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a008098987e.shtml#passive

Problem with passive mode FTP server and NAT

Hi,
I have a problem with Passive mode FTP and NAT.
I am trying to run both an FTP server and sharing the Internet connection via NAT. I have by the way specified the passive ports to use in ftpaccess (65000-65534). Everything works fine until someone tries to connect via Passive mode. I have tracked the problem down to the firewall and the rule that handles NAT.
Firewall rule config without NAT:
00001 allow udp from any 626 to any dst-port 626
01000 allow ip from any to any via lo0
12300 allow ip from any to any
65535 allow ip from any to any
Firewall rule config with NAT
00001 allow udp from any 626 to any dst-port 626
00010 divert 8668 ip from any to any via en1
01000 allow ip from any to any via lo0
12300 allow ip from any to any
65535 allow ip from any to any
So, passive ports do not work when NAT is on. If I turn it off, Passive ftp works like a charm.
But how do I solve my problem? I have in my quest for the answer stumbled upon "-punch_fw" but do not know how to use it or if it even helps me at all?
Best regards,
Peter
B&W G3 Mac OS X (10.4.5)

Media/Lacrosse-1-tiny.3gp
I can't find the file on your server.
They may also need to edit the .htaccess file to allow the .3gp file extension be used. Call them.

The remote server returned an error: 227 Entering Passive Mode (201,199,193,165,154,52).

Hi I have a problem
The remote server returned an error: 227 Entering Passive Mode (201,199,193,165,154,52).
I dont knoe how to solve it

Hi,
Please see the following links and try the methods to check if they are helpful:
http://geekswithblogs.net/hmloo/archive/2012/10/16/the-remote-server-returned-an-error-227-entering-passive-mode.aspx
http://social.msdn.microsoft.com/Forums/en-US/0128e595-c8e2-4f5e-9426-fd93eb510cab/the-remote-server-returned-an-error-227-entering-passive-mode-67228534212130?forum=netfxnetcom
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Then, it is not a Microsoft Office issue, you'd better post your question to MSDN forum:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=netfxnetcom
Regards,
George Zhao
TechNet Community Support

Error while disabling passive mode while connecting

Hi,
I am trying to connect to FTP server, however when I DO NOT
check the "Disable passive mode" check box, I am able to connect,
but then I am not able to view the files that are directly in the
directory. for .eg. if within "MyDir" directory there are "MyDir1",
"MyDir2" directories and "MyFile1" and "MyFile2" files, then I will
not see "MyFile1" and "MyFile2". However when I try to connect by
checkinig the option of "Disable passive mode" then I get the error
"Access violation at address 004ED037 in module 'homesite45.exe'.
Read of address 00000014."
I am not able to resolve this issue. Pls give some inputs if
nebody knows abt it.

Hi,
I am trying to connect to FTP server, however when I DO NOT
check the "Disable passive mode" check box, I am able to connect,
but then I am not able to view the files that are directly in the
directory. for .eg. if within "MyDir" directory there are "MyDir1",
"MyDir2" directories and "MyFile1" and "MyFile2" files, then I will
not see "MyFile1" and "MyFile2". However when I try to connect by
checkinig the option of "Disable passive mode" then I get the error
"Access violation at address 004ED037 in module 'homesite45.exe'.
Read of address 00000014."
I am not able to resolve this issue. Pls give some inputs if
nebody knows abt it.

Can't connect to ftp servers with Passive Mode

Hello,
I can't connect to ftp servers with Passive Mode.
I have Linksys WRT54GL.
Msg i have:
[R] 200 PORT Command successful.
[R] LIST -al
[R] 150 Opening ASCII mode data connection for /bin/ls.
[R] 426 Data connection closed, transfer aborted.
[R] List Error
and:
[R] 200 Type set to A.
[R] MODE Z
[R] 200 MODE Z ok.
[R] PASV
[R] 227 Entering Passive Mode (*,*,114,11,8,147)
[R] Opening data connection IP: *.*.114.11 PORT: 2195
[R] Data Socket Error: Connection timed out
[R] List Error
Thanks for the help !

Maybe you need to do Port Forwarding on your router...Check for the Port Numbers for your FTP Server...

FTP Client can not make a Data connection in Extened Passive Mode

When i send the command "EPSV" to the FTP server , it reply with the message :
229 Entering Extened Passive Mode (|||60238|)
It seems the Server accept Extended Passive Mode.
But then i send the LIST command to the server , after a few seconds i got an exception :
java.Net.ConnectException : Connection timed out : connect
In my Java Program, after sending the "EPSV" command to the server and receiving the port number, my program then initiate a data connection by calling : Socket dataConnection = new Socket(serverHost,serverPort) , serverHost is the host of the FTP server, and serverPort is the port that the server send me.
I think the problem here is that the initiate of data connection is failed. But i dont know why.
Can anyone explain for me ? I really appreciate.

You may be a newbie, but at least your questions are intelligent.
Abstracting the network part - yes, this can be done, but you should keep in mind that the VI will still be running on the remote target, so you should not use this to plug directly into your RT code. In these cases, a communication module is very good because it decouples the undeterministic comm from the RT code. You can do this either using a protocol, as you mentioned, or by calling the VIs running on the cFP. For example, a VI could be used as a repository by having an uninitialized shift register which maintains its value between runs (this is known as a LV2-style global) - the cFP app will write values into it and the PC app will read values from it.
To do this, you open a reference to the application running on the cFP and then you call VIs dynamically by name. By using the Call by Reference Node you can call the VI and use its connectory pane. All the primitives you need are in the Application Control palette and you should be able to find some examples in the example finder (Help>>Find Examples) by searching for "dynamic" and other similar terms. Attached is a simpified example.
To transfer data in a real-time target, I believe your best bet would be RT FIFOs.
To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here, here, here, here, here and here are a few you can start with and here are some tutorial videos. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf).
You should also follow the online communities (this one, the LAVA forums, Info LabVIEW).
Try to take over the world!
Attachments:
Comm Demo.llb ‏63 KB

LACP passive mode on EvPC on Nexus 5600

I have a Nexus 5600 in a co-lo facility. The server administrators want to be able to PXE boot servers connected to an active active FEX and once provisioned bundle the two ports with LACP. On a typical switch you would put the ports in passive mode where they would act like normal ports until the server started talking active LACP after it was built. However on the Nexus while the ports show up and connected, they don't seem to operate until the port-channel comes up. While in a channel group they won't pull a MAC address off the host. If I take them out of the channel group they both pick up MAC addresses and they can PXE boot.
Anyone else run into this issue and is there something extra I need to do on the Nexus to make it work?

Hi Scott,
Could you please share the network diagram along with the configuration, so that I can help you further.
Best Regards
Sachin Garg

How To Active/Passive Mode for FTP Adapter?

Hi there,
For one of our adapters we need to communicate with a FTP server which only accepts FTP connections in active mode. It seems that Xi uses by default the FTP passive mode.
The question is; is it possible to switch to the active mode? and How to do that?
Any feedback is appreciated.
Rob.

Hi Robert,
Did you get through this problem?
Looks like we are also facing a similar issue and want to find out if it is possible to switch to active mode?
Regards,
Prasad

IPS reactions in passive mode

Hi
we are planning to deploy cisco IPS 4200 series on our network. We have a redundant network so what I need is an a device that would react to threats(via acl, shun, resets) while in passive mode ( using span or taps). couple of questions
1- Is this device capable of preventing threats whilein passive mode.
2- What is the diffrence between cisco IDS and IPS series ?
Thanks

Hi!
The Cisco 4200 IDS series work as IPS also when used with version 5.0. This means that you can use an IDS/IPS device as a tap in a line to "prevent" attacks by not passing attacking packets. Of course this is a mode of operation, and if you just want to use the device as IDS you can. As IDS you will "monitor" VLANs o ports usually, from a span port. The IDS will alarm and send resets (if configured for) to prevent attacks. You can also configure the IDS to put ACL on border routers or PIX to stop the offending traffic (this may require some tedious and carefull config).
Consider deploying Cisco ASA5500 appliances also. They are IDS/IPS, FW, VPN, and much more.
http://www.cisco.com/go/asa
Mario S.
CCIE #14047

SFTP and passive mode

Hi All,
I have developed, SFTP for our project, I could not find if there is PASSIVE mode in SFTP, as in FTP. Can any one help me on this issue, if there is Passive mode then how to make it, if not why it does not have
Thanks,
Sreejesh
Edited by: sreejesh.pulukool on Aug 28, 2008 10:54 AM

Hi Mona:
If your FTP client works, then there has to be some miniscule detail that's different between that setup and what you're inputting into your DW Manage sites. Maybe you should print out your successful FTP setup details, and compare to what's in your DW...
If this helps, this info came from GoDaddy's help section:
From the Site menu, select Manage Sites.
In the Manage Sites box, Click New, then choose Site.
In the Site Definition box, enter the name and URL of your website and clickNext.
If a certain type of server technology is necessary for the site to function, selectyes. Otherwise, select no and click Next.
For working with files during development, select Edit local copies on my machine...(recommended). It is very important that they select this option.
Enter connection information as follows:
How do you connect to your remote server?
FTP
What is the hostname or FTP address of your web server?
ftp.domainname.com
What folder on the server do you want to store your files in?
/ or blank
Enter your FTP login and FTP Password
Click Next.
For checking in and out files, select No, do not enable..
Review the summary to be sure all information is accurate, then click Done.
I have a dozen sites hosted at GD, and in most cases (where I had trouble), it was operator error. Good luck!
Regards, Ned

IDSM-2, inline and Passive mode in same Module?

Hi,i have a question that it can be strange.in our network we have implemented idsm-2 module in our 6513 Switch in inline mode.without any discution about network design suppose that our network is going beyond IDSM-2 Throughput and then we want to use IDSM-2 for some traffic in Passive mode insted of inline to reduce drop probability in inline mode.i mean before this state we were using idsm-2 data port 1(in vlan pair mode),now can we use data port 2 for this purpus(capturing some traffic on data port 2 for passive operation)? in other word idsm-2 can operate in this way?

i found my answer in idsm-2 document "You can mix sensing modes on IDSM-2. For example, you can configure one data port for promiscuous mode and the other data port for inline VLAN pair mode. But because IDSM-2 only has two data ports and inline mode requires the use of both data ports as a pair, you cannot mix inline mode with either of the other two modes." but something else,for doing such thing suppos that i have sig 2004 configured for inline traffic to deny attacker inline then this action doesnt make any sense for some data in passive mode and suppos that for that kind of traffic which idsm-2 is operating in passive mode i want to just send an alert. so can i use deferent VS for doing this? thanks.

Passive Mode

Similar Messages

Maybe you are looking for