Passthrough (for lack of a better term) a WRVS4400N

I already have a Cisco ASA for a firewall, but I need a wirelss and I was recently given a WRVS4400N. But I want the wireless device to have the same IP range on both sides of the router. My LAN uses a 10. range, and of course the linksys wants to assign a different range. I don't want the router to assign IP addresses, I want the ASA to do it.
I found an article once before on how to do it, but I can't recall how, and I can't figure out what key words I searched with:-(
Anyone?
Thanks! Brian

Hi.
These products are being handled by the Cisco Small Business Support Community.
See the complete list here.
OnnagokorO

Similar Messages

It sounds like my hard drive is "leaking" or popping, for lack of a better term.

First of all, I got a Macbook Pro MD104LL/A 2 1/2 weeks ago and the trackpad started being defective to a point to where it was a pain to mess with. So I ended up swapping it out for another one earlier today. Now after researching a bit, my hard drive (right side of trackpad only) is popping with an occassional loud pop. What is the problem, has anyone else ever had 2 defective macbook's in a row? Man, I've enjoyed the experience, but I've had better luck with windows than this. I am even thinking about just returning the whole purchase in general. How can you pay $2100 dollars for two defective products in a row! I've seen people recommending going into the terminal to do super user codes and downloading a file into the bin directory, which is really easy to do in my opinion. But why would I have to pay 2100 dollars to get into a terminal and download a file in a brand new directory when this problem shouldn't have happened in the first place. If someone has any answer to why this is happening, please help out. I don't want to have to return this, but I guess I might have to for a 2nd time. I guess 3rd times a charm huh?

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
In Firefox 4 [http://kb.mozillazine.org/Safe_mode Safe mode] disables extensions and disables hardware acceleration. 
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.
* Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
In Firefox 4 you can use one of these to start in [[Safe mode]]:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

My Firefox menus and tabs and text are all warped and slightly out of focus for lack of a better term. What kind of issue is this. I only have the default theme/persona Strata installed. It's quite annoying.

My tabs and text seem slightly corrupted. There's an apparent curviture to the corners and the tops bow. The text is affected but the font's don't appear to have been edited to different fonts. It looks like some photoshop corruption effect to be honest, but this just happens to firefox everytime I use it now. It comes up normal for a second then 'fades' into this corrupt looking version.

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
In Firefox 4 [http://kb.mozillazine.org/Safe_mode Safe mode] disables extensions and disables hardware acceleration. 
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.
* Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
In Firefox 4 you can use one of these to start in [[Safe mode]]:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

MDX: Forming Complex "Structures" (for lack of a better term)

I'm trying to create a "structure" that contains (Customer, Date of First Purchase, Date of Last Purchase) where the last 2 items are members from the same dimension attribute. This structure will form the basis of some more complex logic...for
example, I may have another "structure" containing (Customer, Date of Event1, Date of Event2) that needs to be intersected with the first:
Intersect(
Struct1 (Customer, Date of First Purchase, Date of Last Purchase)
Struct2 (Customer, Date of Event1, Date of Event1)
One option I'm considering (since a tuple cannot contain multiple members from the same dimension attribute according to
this article) to create additional date dimensions with the same relationship to the fact tables and use LINKMEMBER.
Another option would be to create a set consisting of 2 tuples for each customer:
(Customer A, Date of First Purchase),(Customer A, Date of Last Purchase),
(Customer B, Date of First Purchase),(Customer B, Date of Last Purchase),
...and then using some FILTER/GENERATE logic to work through the remaining logic...but I'm not convinced this would be any easier than simply maintaining 2 separate sets:
(Customer A, Date of First Purchase),
(Customer B, Date of First Purchase),
(Customer A, Date of Last Purchase),
(Customer B, Date of Last Purchase),
Any suggestions/recommendations?
Is my approach way off?
BI Developer and lover of data (Blog |
Twitter)

hi,
another idea: take the same attributes from different hierarchies , make pseudo hierarchies if needed.
Philip,
thanks - that is also a good idea. However, and just like with the option of creating extra role-playing date dimensions, the drawback is that it isn't "dynamic" - I would need to know ahead of time the max number of possible members from the dimension attribute
to include.
I'm essentially trying to implement complex temporal logic dealing with events in time...and while so far I've only seen the need to have 4 members from the same dimension attribute in a "structure" future requirements may call for more than that.
BI Developer and lover of data (Blog |
Twitter)

PICTURE CALLS (for lack of a better term)

The Droid Razr comes with a front facing camera, but I cannot find the software or the proper app to use during phone calls.
Can someone give me some in"sight" on it?
I thank you!!!

Search video call in the market. The most popular is Skype, but I think there are a couple others. Who ever you are calling also needs to have the same thing on their end. One good thing about Skype in particular is that it can used on a computer as well. There is nothing that will work for "regular" calls (turn them into video calls).

Has anyone ever had a problem with their screen going all "choppy" for lack of a better word. It happens when I go from one window to the next and they sort of mesh together.

In addition to doing this today my mouse went all crazy and it was like I had no control over it. Once I restarted my computer it was fine. I took it into the genius bar a few weeks ago, but they couldn't find anything wrong with it. If anyone has experienced something similar OR has any idea what in the world might be causing this please let me know!

Did anyone ever suggest you reset your PRAM?
http://docs.info.apple.com/article.html?artnum=2238
Also might want to try resetting the SMC, although I
doubt there's an issue there.
http://docs.info.apple.com/article.html?artnum=304123
I'm getting tired of people who supposedly know what
they're doing simply guessing that resinstalling the
OS might solve the issue. It's like trying to dissect
a frog with a sledge hammer, and wondering why you
didn't learn anything about anatomy in the process.
These sorts of things, although bizarre, should be
(and probably are) fixable without major surgery.
Thanks for the suggestion... but I think my first question would be why these parameters would need re-setting? This is a new machine... It has never been shut down hard. It is used at most 10 hours per week... mostly using Office 2004 for MAC. I need to figure this out as I will soon need it as a Cs2/CS3 - Aperture workhorse.
I too agree that it is best not to use a sledge when a scalpel is needed... but as a novice to the MAC world I may have been misled by Apple support. I seems to have fixed the symptoms ( some) but appears NOT to have addressed the cause... which is what I am after.
Would TechTool Pro detect a bad HD or RAM?
Thanks....

My iPods sound is iffy, for lack of a better word. At times it's fine, but most the time it doesn't work. The volume dials don't show up either. What's wrong with it and how should I fix it?

My friend said the speakers might be blown, but the sound still works at times. And I'm sure if he speakers were broken then the volume dials would show up as well. So I need help figuring out whys going on.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other hardware problem.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Payment Terms for more than 3 payment terms in OBB8

Hi Gurus,
Please advise as to how to create for more than 3 instances, say 4 or 5. Because standard SAP provides only for 3. Let me brief you as below :
- I created the 5 payment Terms in OBB8. 5001 (clicking as instalment) ; 5002 for 5% - 30 days ; 5003 for 4% for 60 days ; 5004 for 3% for 90 days and 5005 for Net 180 days.
- I assigned these 5002 to 5005 to 5001 with say 25% instalment each in OBB9.
- Now I assigned this 5001 payment term in the Vendor Master.
- Posted new FB60 invoices with say 01st Oct 09 as Document Date with say Rs. 25000/-
- Now, I have to make the payment to the Vendor on say 15th November 2009.
- So ideally I am eligible for 4% discount on Rs. 25000/- since I am paying after 30 days and before 60 days.
- I am posting through F-53 with 15.11.2009 as the document data, and now the system is not calculating discount for the first instalment of 25% instalment and for the next 25% the discount is calculated @ 4% on 25% only.
- Now my requirement is to calculate 4% discount in Rs. 25000/-.
Can any one suggest the required approach.
Vikas

Hi,
Unfortunatelly payment terms in OBB8 is working as designed and the functionality cannot be enhanced. In the standard system you cannot add additional levels in the transaction OBB8.
Instead you can check the option of using Terms of Payment for Installment Payments (transaction OBB9). Terms of payment for installment payments are made up of individual terms of payment. An individual payment term can be assigned to each installment. When you post an installment payment, the total amount is split up into individual items for each installment and each installment
is calculated with the relevant payment term. For more information on maintaining terms of payment, refer to the Implementation Guide for Accounts Receivable and Accounts Payable.
The terms of payment key can determine the following:
-The valid cash discount rate for an individual payment with a maximum of 3 payment terms (first cash discount period, second cash discount period, and due date for net payment) and also a baseline date for the payment
-The terms of payment for installment payments.
You define the following for the terms of payment key for installment payments:
- Sequential number of the installment
- Percentage rate for the installment
- New terms of payment key for the installment item
The percentage rates you specify must total 100%.
Example
Suppose you can create payment term NT30 (30 days net), NT60 (60 days net), NT90 (90 days net).
Installment terms of payment
RT01   1   30%   NT30
RT01   2   30%   NT60
RT01   3   40%   NT90
I hope this helps.
Regards
Ravinagh Boni

Is there a step by step somewhere for using the iCloud Beta?

Windows 7 64bit / iTunes 10.4.80
Is there a step by step somewhere for using the iCloud Beta? I assume we can activate it after reading Apple advertizing on the Beta and 10.4.80. I don't see anything on iTunes that would get me there - Thank you for your help - IM

Thank you for the assistance, I greatly appreciate it!

I am debating between the 13in 2.9ghz mac book pro or the 13in 2.5 ghz mac book pro with all the same specs bbut for me i am trying to see which one for the money is better becuase the 2.5 will run me 100-200 dollars less than the other

I am debating between the 13in 2.9ghz mac book pro or the 13in 2.5 ghz mac book pro with all the same specs bbut for me i am trying to see which one for the money is better becuase the 2.5 will run me 100-200 dollars less than the other

Only you can make that determination. All things being equal the 2.5 GHz model is slower.

Why using workarea for internal table is better in performance

Please tell me
why using workarea for internal table is better in performance

Hi Vineet ,
Why would we choose to use an internal table without a header line when it is easier to code one with a header line?
it has following reason.
1)Separate Internal Table Work Area:
The work area (staging area) defined for the internal table is not limited to use with just one internal table.
take ex-
Suppose you want two internal tables for EMPLOYEE one to contain all records and one to contain only those records where country = USA. You could create both of these internal tables without header lines and use only one work area to load data into both of them. You would append all records from the work area into the first internal table. You would conditionally append the USA records from the same work area into the second internal table.
2) Performance Issues: Using an internal table without a header line is more efficient than one with a header line
3) Nested Internal Tables: If you want to include an internal table within a structure or another internal table, you must use one without a header line.
If this one is helpful ,then rewards me
Regards
Shambhu

Thank you for accepting the OTN Beta License Agreement

http://www.oracle.com/technetwork/database/express-edition/downloads/index.html
Interesting that the production XE license agreement says: "You must accept the OTN License Agreement for Oracle Database Express Edition 11g Release 2 to download this software. "
Then when you accept, it says "Thank you for accepting the OTN Beta License Agreement; you may now download this software."
(or should this be in the XE forum?)

This is fixed, thanks for reporting!

Hi. NOT CALL ME FOR I AM DEAF BETTER U WRITE ONLY EMAIL. When I run the app ALLMYMUSIC FROM WONDERSHARE after installing I get this window up. When I log in with my Apple ID I just get: The Apple ID you entered couldn't be found or your password was incor

Hi. NOT CALL ME FOR I AM DEAF BETTER U WRITE ONLY EMAIL.
When I run the app ALLMYMUSIC FROM WONDERSHARE after installing I get this window up.
When I log in with my Apple ID I just get:
The Apple ID you entered couldn't be found or your password was incorrect. Please try again.
I have however made sure that this is the correct Apple ID and password that I am putting in. In the Mac App Store it works.
Do you have any solution?
I am running Mavericks 10.9.2.

To post a screenshot click on the "Camera" button at the top of the reply box and upload it there.
MtD

[svn] 2417: SDK-16048 - No longer open flash10 namespace for Flash Player 10 Beta 2 and onwards

Revision: 2417
Author: [email protected]
Date: 2008-07-09 11:57:25 -0700 (Wed, 09 Jul 2008)
Log Message:
SDK-16048 - No longer open flash10 namespace for Flash Player 10 Beta 2 and onwards
Reviewer: Pete
Bugs: SDK-16048
QA: Yes, please run tests related to -target-player=10, e.g. make sure 'z' property is accessible. Make sure that these tests will run when this change is merged to trunk.
Doc: No
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-16048
http://bugs.adobe.com/jira/browse/SDK-16048
Modified Paths:
flex/sdk/branches/3.0.x/lib/asc.jar
flex/sdk/branches/3.0.x/modules/asc/src/java/macromedia/asc/util/ContextStatics.java

Step 1: uninstall Avast See how it is as that is a known culprit
Step 2: Chrome does not play well with OS X and is also sighted as a leading cause
Step 3: DropBox has been a processor or network hog though less so than the above two.
The Community you want(ed): MacBook Pro

Hello, sent me the email canceling my account creative cloud, and I did not cancel the account, I do not understand the reason for the cancellation was because term option than 1 year and not yet completed.

Hello, sent me the email canceling my account creative cloud, and I did not cancel the account, I do not understand the reason for the cancellation was because term option than 1 year and not yet completed.

There is payment related issue, I have send you a personal message, please respond as requested.
I shall raise a request to the digital river store from where it was purchased.
I am from the Customer care Team.
Regards
Rajshree

Passthrough (for lack of a better term) a WRVS4400N

Similar Messages

Maybe you are looking for